The configuration assistants emca and netca exits (redhat8, pentium IV)

The assistants just exits when I try to configure listeners and a (new) repository. I'm using redhat 8, oracle8i and pentium IV. Any suggestions?

There is a known problem with certain versions of jdk and pentium IV. Try using an other.
Good luck!

Similar Messages

Where is the Configuration assistant ???

Hi,
I've installed the 9.2.0.1.0 client software on my Windows XP side.
I don't have the configuration assistant installed !
Is it on the full installation part ?
Thanks
Marc

Hi,
its a part of database installation not for client software.
and u can find it on $ORACLE_HOME/bin/dbca only with database installation....
Thanks
Kuljeet

After installing lion the setup assistant crashed and i had to force quit. now i cannot open it. any tips?

Ater installing Lion, the setup assistant froze and I had to force quit. Now I cannot open it. What can I do?

See if the Recovery HD was installed.
Hold ⌘R on Boot, and if it works, select Reinstall OS X Lion

Itunes won't recognize my ipod nano 5th gen. it's recognized by the computer, but I get a message from itunes that says an ipod has been detected, but it couldn't be identified properly. i did all of the steps on the ipod assistant. unistalled and reinsta

Itunes will not recognize my Ipod Nano 5th g. It shows up on my computer. But Itunes gives me a message that says "An ipod has been detected, but it could not be identified properly. I did all the steps in the ipod assistant. Unistalled and reinstalled drivers and itunes. restarted ipod and even erased everything. It is recognized by other computers. And itunes recognizes my iphone fine. please help.

Have you restarted your computer? iTunes updated?

Video Card??? And what does the Configuration assistant do besides nothing

I installed the Solaris 8 on my desktop (Asus P3V133). I followed the installation instructions and I can not use the video Card (S3540 Stealth). Thus, I keep going to command line instalation mode. After installation, i get to CDE fine, however, it is in monochrome mode. how can i configure the the video card from CDE (Is it possible). I need help with this. I know how to use UNIX commands, however, never configured a system before.....Thanks
MJ

Hi,
What is the exact make and manufacturer of your video card? I am not sure if you have checked the Hardware Compatibility List yet for the supported hardware? If not take a look at the following: http://soldc.sun.com/support/drivers/hcl/8/401/files/c0112.htm#VIDEO-1
To change the settings of your video card your best bet would be to open up a terminal and type "kdmconfig" this will let you change various system settings (video card settings, mouse, keyboard...etc).
Hope This Helps
Regards,
Andrew
Sun Developer Technical Support

HT4818 I was doing the BootCamp Assistant partition and it freezed before finishing I had to restart the PB now I have an invisible partition how can I remove it?

After trying using again BootCamp 4 Assistant it doesnt allow me to create the partition, I tried using Disk Tools Partition to delete it and the 60GB white space is shown in the Partition menu but it doesnt have a name nor can it be selected and delete with any Partition tool... HELP

Thanks mendel1 but I tried but everything in the Partitions in Disk Utility is grey (not available)
The 500GN hard drive disk size is shown correctly as 499.25GB but the bar in white are the 60GB that it was going to be the Boot Camp 4 partition but it never completed its process since the computer froze. The only resizing possible is to reduce the white bar to the blue size but the HD becomes 439.25 GB in size In the ERASE also all options are greyed the disk can not be erased HELP!

I. Was listening to music on my iPod 5 th gen when the sound got quiet and I exited music annt the It still was quiet so I restarted and still it is quiet

HhElp me out I don't know what happened I just got it today for Christmas

have u tried restarting it again
if that doesnt work
turn it off n why dont u keep it on charge for a while
n if even that doesnt work there is a thing called warenty if u r still in the terminal of 5th gen
merry christmas

Sometimes, when I try to preview my book on an iPad, the Proof starts loading, and that exits

And I can't open it. I have no idea why it is doing this.

Try deleting all copies off your iPad and repeating with a Preview. Still no joy, stick w/syncing via iTunes - you'll need to do that eventually when you proof for final distribution.

WebCenter 10.1.3.2.0 install: content DB configuration assistant failed

Hi Experts,
I am trying to install Oracle WebCenter 10.1.3.2.0 on Windows 2003 machine. I had installed a DB 10.2.0.1 to serve for the db for content DB repository.
I chose the Basic Installation type for webcenter suite. The installation is generally successful but the configuration assistant for content DB failed.
In the contentconfig.log file, I see the following error stack.
*********** Starting AdminManagerAction_CreateInterMediaMedia ***********
Next task: CreateMediaLOB InterMediaBlob $$mediaClass $$chunkSize $$lobTablespace $$isIndexed
Exception while performing task 'CreateMediaLOB InterMediaBlob $$mediaClass $$chunkSize $$lobTablespace $$isIndexed' ; exception is:
oracle.ifs.common.IfsException: IFS-30002: Unable to create new LibraryObject
oracle.ifs.common.IfsException: IFS-32257: SQL error adding content column(s) to media instance table. SQL was ALTER TABLE ODMM_CONTENTSTORE ADD ( InterMediaBlob BLOB, InterMediaBlob_T BLOB ) LOB (INTERMEDIABLOB) STORE AS (CACHE pctversion 20 chunk 32768 tablespace CONTENT_IFS_LOB_M DISABLE STORAGE IN ROW STORAGE (INITIAL 50M NEXT 50M)) LOB (INTERMEDIABLOB_T) STORE AS (CACHE pctversion 20 chunk 32768 tablespace CONTENT_IFS_LOB_M DISABLE STORAGE IN ROW STORAGE (INITIAL 50M NEXT 50M))
java.sql.SQLException: ORA-01659: unable to allocate MINEXTENTS beyond 14 in tablespace CONTENT_IFS_LOB_M
I am stuck with this error. This is the second time I did the complete installation and have got this error.
Can anyone tell what is the cause of the error and what is needed to fix it? Will appreciate any helpful ideas.
thanks!

I have a similar problem on a similar environment (Win 2003/ 10.1.3.2.0/DB 10.2.0.1) installation of Webcenter Suite using Basic installation.
I have tried creating the table spaces according to the specifications given in oracle documentation, yet the installer complained about the table spaces not having free space left (specially, the WORK_IFS tables space). I also tried giving spaces on average 15MB more then the suggested space for their datafiles, and it still complained about the table space issue.
- When the configuration assistant fails, and you exit out of the Universal Installer, is there any option or way to just rerun the configuration assistant for content db again?
- I see on the EM for WebCenter Suite that all the other components seem to install properly and are up and running yet there is no mention of Content DB. Nor there is any option to try to reconfigure it.
- or do we have to uninstall the whole WCSuite, and/or the database 10201 too and then reinstall the software?
Can someone please help in finding a way forward?
thanks for your cooperation.
AMN

WebCenter Suite installation: Content DB configuration Assistant failed

Hi Experts,
I am trying to install Oracle WebCenter 10.1.3.2.0 on Windows 2003 machine. I had installed a DB 10.2.0.1 to serve for the db for content DB repository.
I chose the Basic Installation type for webcenter suite. The installation is generally successful but the configuration assistant for content DB failed.
In the contentconfig.log file, I see the following error stack.
*********** Starting AdminManagerAction_CreateInterMediaMedia ***********
Next task: CreateMediaLOB InterMediaBlob $$mediaClass $$chunkSize $$lobTablespace $$isIndexed
Exception while performing task 'CreateMediaLOB InterMediaBlob $$mediaClass $$chunkSize $$lobTablespace $$isIndexed' ; exception is:
oracle.ifs.common.IfsException: IFS-30002: Unable to create new LibraryObject
oracle.ifs.common.IfsException: IFS-32257: SQL error adding content column(s) to media instance table. SQL was ALTER TABLE ODMM_CONTENTSTORE ADD ( InterMediaBlob BLOB, InterMediaBlob_T BLOB ) LOB (INTERMEDIABLOB) STORE AS (CACHE pctversion 20 chunk 32768 tablespace CONTENT_IFS_LOB_M DISABLE STORAGE IN ROW STORAGE (INITIAL 50M NEXT 50M)) LOB (INTERMEDIABLOB_T) STORE AS (CACHE pctversion 20 chunk 32768 tablespace CONTENT_IFS_LOB_M DISABLE STORAGE IN ROW STORAGE (INITIAL 50M NEXT 50M))
java.sql.SQLException: ORA-01659: unable to allocate MINEXTENTS beyond 14 in tablespace CONTENT_IFS_LOB_M
I am stuck with this error. This is the second time I did the complete installation and have got this error.
Can anyone tell what is the cause of the error and what is needed to fix it? Will appreciate any helpful ideas.
thanks!

I have a similar problem on installation of Webcenter Suite using Basic installation.
I have tried creating the table spaces according to the specifications given in oracle documentation, yet the installer complained about the table spaces not having free space left (specially, the WORK_IFS tables space). I also tried giving spaces on average 15MB more then the suggested space for their datafiles, and it still complained about the table space issue.
When the configuration assistant fails, and you exit out of the Universal Installer, is there any option or way to just rerun the configuration assistant for content db again?
I see on the EM for WebCenter Suite that all the other components seem to install properly and are up and running yet there is no mention of Content DB. Nor there is any option to try to reconfigure it.
Can someone please help?
thanks for your cooperation.
AMN

How to re-run OCS 'Configuration Assistants'?

Hi,
Is it possible to re-run just the 'Configuration Assistants' step of the OCS Release 2 Middle Tier installation? Our installation continues to fail at the 'Calendar Server Configuration Assistant' step. We have a couple of suggestions for getting beyond this step but we don't want to repeat all the preceeding installation steps which succeeded. Unfortunately, OUI has been shut down since the failed installation so we cannot simply retry the failed configuration assistant.
Ideally, we need to somehow jump to the 'Configuration Assistants' step and retry the 'Calendar Server Configuration Assistant' and subsequent assistants.
Installation of Middle Tier component is on a Red Hat AS2.1 server which also contains the OCS 9iAS Infrastructure installation.
Many thanks,
Neil W. Garside

Hi,
it is possible to rerun the configuration assistants.
The log file in the directory $ORACLE_BASE/oraInventory/logs/*InstallActions* contains all command
lines for the different conf. assistants.
You can copy and paste this lines directly into the
command line shell.
Hope this helps,
Andreas

Configuration Assistent??

Hi,
every time I reboot my Sol 8 Intel machine, the configuration Assistent starts and I have to accept the defaults with F2 to really reboot.
So a remote reboot is not possible.
How can I change this behaviour?
Please reply direct to [email protected]
Thx
Werner

No. The version of the internal JVM is tied to the version of the databas. All 9.2 databases will have a 1.3 JVM. If you need the 1.4 JVM, you can upgrade to the 10g database.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Manually starting Intelligent Agent Configuration Assistant and HTTP Listener

I have installed Oracle 9i on Solaris 8 and it stopped with an "Out of Memory" error during the Starter Database creation. I have fixed the memory problem and have now manually started the Database Configuration Assistant manually and managed to install a new database. Now I am trying to start the Intelligent Agent Configuration Assistant and the Apache HTTP Listener, but I cannot find out how to do this so that I can continue on with and complete the installation process from where I left off.
Do anyone know how to do this? I would appreciate any help that anyone can give.
Thanks
Anthony

Lets start with what product you are installing and why. An Oracle database installation, in and of itself, does not install an HTTP server.
Of course one might also wonder why you are, just now, installing software so old it is in desupport.

HT4859 The guy at the verizon store programmed my phone before I got the chance to restore my apps, etc. from icloud- therefore i did not get to go through the setup assistant.. How do i get my apps and app data back on my phone w/o having to go through

The guy at the verizon store programmed my phone before I got the chance to restore my apps, etc. from icloud- therefore i did not get to go through the setup assistant.. How do i get my apps and app data back on my phone w/o having to go through and re-

To restore from an iCloud backup you have to erase the phone and start over. To do this, go to Settings>General>Reset, tap Erase All Content and Settings, then go through the setup assistant again and when given the option, choose Restore from iCloud Backup. There is no other way to do this.
Be sure you phone is connected to wifi and your charger as this is likely to take some time to finish.

Configuration assistant "Oracle Net Configuration Assistant" failed

I was installing Oracle 10g Enterprise and received the following failure notificaiton. How can I resolve this?
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2\jdk\jre\bin/java.exe -Dsun.java2d.noddraw=true -Duser.dir=C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2\bin -classpath ";C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2\jdk\jre\lib\rt.jar;C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2\jlib\ldapjclnt10.jar;C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2\jlib\ewt3.jar;C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2\jlib\ewtcompat-3_3_15.jar;C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2\network\jlib\NetCA.jar;C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2\network\jlib\netcam.jar;C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2\jlib\netcfg.jar;C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2\jlib\help4.jar;C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2\jlib\jewt4.jar;C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2\jlib\oracle_ice.jar;C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2\jlib\share.jar;C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2\jlib\swingall-1_1_1.jar;C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2\jdk\jre\lib\i18n.jar;C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2\jlib\srvmhas.jar;C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2\jlib\srvm.jar;C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2\oui\jlib\OraInstaller.jar;C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2\lib\xmlparserv2.jar;C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2\network\tools" oracle.net.ca.NetCA /orahome C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2 /orahnam OraDb10g_home1 /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp,nmp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2\network\install\netca_typ.rsp
Error occurred during initialization of VM
java/lang/NoClassDefFoundError: java/lang/Object
Configuration assistant "Oracle Net Configuration Assistant" failed
The "C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------
Edited by: BenS on May 20, 2009 6:05 PM
The following information was found in the installActions...log file.
INFO: cf session hashcode: 13785219
INFO: cf session saved with key: OraDb10g_home1 oracle.server
INFO: cf session is ok
INFO: created and saved cf session for oh: OraDb10g_home1
INFO: passing params to cf
INFO: ORACLE_HOME is not settable, hence not setting the value
INFO: ORACLE_HOME is not settable, hence not setting the value
INFO: ORACLE_HOME is not settable, hence not setting the value
INFO: ORACLE_HOME is not settable, hence not setting the value
INFO: {Parameter:TOPLEVEL_COMPONENT in {Aggregate:OuiConfigVariables:1.0.0.0.0:common}}: Parameter data type is not compatible with the provided String Array.
INFO: passing params to cf done
INFO: done saving info by cf
INFO: This is a shared oracle home or remote nodes are null. No copy required.
INFO: cf session retrieved for key: OraDb10g_home1 oracle.server
INFO: cf session retrieved for key: OraDb10g_home1 oracle.server
INFO: cf session retrieved for key: OraDb10g_home1 oracle.server
INFO: cf session retrieved for key: OraDb10g_home1 oracle.server
INFO: RUN_RECOMMENDED_TOOLS FIRST is set to false
INFO: No of Recommended Tools3
INFO: plugin-list is created
INFO: pluginlist is updated for: Oracle Database 10g current size: 1
INFO: No of ExitOnly Tools in this session: 1
INFO: cf session for perform has hashcode: 13785219
INFO: detached tool list getting prepared fo comp: Oracle Database 10g
INFO: cfsession hashcode for exit only tools: 13785219
INFO: hashcode for action: 8813601
INFO: No of ExitOnly Tools: 1
INFO: exit-tool: Launch browser
INFO: saving exit only tools ...
INFO: no detached only tools in this session
INFO: exit-only tools are created in single installation
INFO: no. of sets of tools to be run: 1
INFO: ca page to be shown: true
INFO: exitonly tools to be excuted passed: 1
INFO: Starting to execute configuration assistants
INFO: Command = C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2\jdk\jre\bin/java.exe -Dsun.java2d.noddraw=true -Duser.dir=C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2\bin -classpath ";C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2\jdk\jre\lib\rt.jar;C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2\jlib\ldapjclnt10.jar;C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2\jlib\ewt3.jar;C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2\jlib\ewtcompat-3_3_15.jar;C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2\network\jlib\NetCA.jar;C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2\network\jlib\netcam.jar;C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2\jlib\netcfg.jar;C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2\jlib\help4.jar;C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2\jlib\jewt4.jar;C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2\jlib\oracle_ice.jar;C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2\jlib\share.jar;C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2\jlib\swingall-1_1_1.jar;C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2\jdk\jre\lib\i18n.jar;C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2\jlib\srvmhas.jar;C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2\jlib\srvm.jar;C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2\oui\jlib\OraInstaller.jar;C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2\lib\xmlparserv2.jar;C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2\network\tools" oracle.net.ca.NetCA /orahome C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2 /orahnam OraDb10g_home1 /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp,nmp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2\network\install\netca_typ.rsp
Error occurred during initialization of VM
java/lang/NoClassDefFoundError: java/lang/Object
Command = C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2\jdk\jre\bin/java.exe has failed
INFO: Configuration assistant "Oracle Net Configuration Assistant" failed
INFO: The "C:\oraclexe\app\oracle;\oracle\product\10.2.0\db_2\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK

I had Oracle 10g XE (Express installed but uninstalled it in case it was causing conflicts with the installation of 10 Enterprise). It appeared to have uninstalled cleanly.
However, I was looking at my Environment variables and noticed the following:
Oracle in OraDb10g_home1 points to a directory that doesn't exists since the uninstall. I deleted this variable.
I also receive the following warning during prerequiste check (but I appeared to have a solution according ot the documentation)
Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Failed <<<<
Problem: The install has detected that the primary IP address of the system is DHCP-assigned.
Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses; However, before you can do this, you must configure the Microsoft LoopBack Adapter to be the primary network adapter on the system. See the Installation Guide for more details on installing the software on systems configured with DHCP.
After delete the environment variable I restarted the Install and it installed fine.
Thank you for the help...

The configuration assistants emca and netca exits (redhat8, pentium IV)

Similar Messages

Maybe you are looking for