The configure database page not appear in grid control

hi
when i try to configure a database target in grid control appear a error . i know that the nslookup not working correctly because these machines not adding to dns server
it's possible communication between oms and agent whithout an dns server, only adding lines in the /etc/hosts
thanks

Which self Service function you are using to change the assignment ?
Their are two API to update asg values. Try to apply user hook on both of them and retry ur scenario.

Similar Messages

  • The configured database is not a compatible database

    Hi, i am experiencing some problems getting our zen servers to carry out
    reporting, auditing, etc etc.
    Running :
    Netware 6.5 sp5
    Zenworks Desktops managment 6.5sp1
    When i attempt to carry out a report or click on the zenworks inventory
    databse object within Console1 - the following error appears:
    "the configured database is not a compatible database"
    I have checked the Tids below but the settings have not changed:
    http://support.novell.com/docs/Tids/.../10097366.html
    and (even though this applies to zenworks 7)
    http://www.novell.com/documentation/...a/aic80cg.html
    I do not know what else to do.
    Any assistance on this would be greatly appreciated.
    regards
    Dennis
    IT Support

    Dennis,
    >
    >Hi, i tried something along the lines of your advice, i used the console1
    >from the server hosting the zenworks inventory server.
    >
    >I copied this to my local pc as this would be alot more quicker...and when
    >i tried the Inventory reporting ...IT WORKED!!!!
    >Resolved the issue of receiving the error message
    >"The configured database is not a compatible database"
    Nice.
    I have seen that happen before and it was caused by Snapin versions. The
    error message is a bit bogus. But if you are not seeing issues on the asa
    screen of the server, then it's likely not the servers problem, but c1's
    problem.
    Jared Jennings - Data Technique, Inc.
    Novell Support Forums Sysop
    My Blog and Wiki with Tips, Tricks, and Tutorials
    http://jaredjennings.org

  • Configured database is not compatible

    When I try to open the inventory I get the error, configured database is
    not compatible, trying to access a later version of the database. I have
    the database configured for Sybase, which is suppossed to be the
    default. However, I don't see a sybase database running on the server, I
    do see a my sql database running on the server. Any ideas what to do
    next? Thanks.

    When in ConsoleOne I go to Tools>ZenWorks Inventory>Configure DB it tells
    me the database is configured successfully. I checked the policys and
    they seem to be setup correctly. When I try to do an Inventory Query, or
    any othe data retrieval, I get the error:
    The configured database is not a compatible database.
    You are trying to access the later version of the ZenWorks database.
    To me, it sounds like the ZenWorks engine and the Sybase database on the
    server, are not the same or compatible. How do I check this and correct
    this?
    Thanks.
    >
    On Fri, 21 Jul 2006 12:47:48 GMT, [email protected] wrote:
    >
    > > Do I need to start it somehow? This is my
    > > first time trying to use zenworks inventory and the instructions are
    not
    > > very good.
    >
    > if it is installed you can start it with mgmtdbs, but you will also
    need to
    > configure the policies correctly
    > --
    >
    >
    > Marcus Breiden
    >
    > If you are asked to email me information please change -- to - in my e-
    mail
    > address.
    > The content of this mail is my private and personal opinion.
    > http://www.edu-magic.net

  • Pages is not saving document correctly.  After saving the changes either do not appear or you can not open the file. The error is "not a valid format"  I am in Pages '09 4.1 (923).  I also use Parallels.  Anyone having similar issues?

    Pages is not saving document correctly.  After saving the changes either do not appear or you can not open the file. The error is "not a valid format"  I am in Pages '09 4.1 (923).  I also use Parallels.  Anyone having similar issues?

    I'm not sure that Lion AutoSave feature apply to network servers.
    I'm just sure that the Versions feature doesn't.
    Yvan KOENIG (VALLAURIS, France) samedi 21 janvier 2012
    iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
    My Box account  is : http://www.box.com/s/00qnssoyeq2xvc22ra4k
    My iDisk is : http://public.me.com/koenigyvan

  • Firefox menu bar appears- file/edit/history etc but the actual page with the search bar does not appear and is blank

    when clicking firefox icon to open the internet, all that appears are the options along the top of the page. the rest of the screen does not appear revealing the desktop picture. The firefox page with the search bar does not appear.
    http://imageshack.us/photo/my-images/214/screenshot20120303at155.png/

    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
    ''(If you're using an added theme, switch to the Default theme.)''
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
    [[Image:FirefoxSafeMode|width=520]]<br><br>
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.

  • HT201406 1st. Gen iPad question:  the touch keyboard does not appear when attempting to input data into data fields - this happens while using all apps, ex. Notes, Google, Pages, etc..

    1st. Gen iPad question:  the touch keyboard does not appear when attempting to input data into data fields - this happens while using all apps, ex. Notes, Google, Pages, etc.. The cursor prompt is present.  Tapping screen just brings up the option to: "Select   Select All   Paste."   I have rebbooted with no change. 
    Message was edited by: Jimfromutah
    The problem was my connected bluetooth keyboard.

    1st. Gen iPad question:  the touch keyboard does not appear when attempting to input data into data fields - this happens while using all apps, ex. Notes, Google, Pages, etc.. The cursor prompt is present.  Tapping screen just brings up the option to: "Select   Select All   Paste."   I have rebbooted with no change. 
    Message was edited by: Jimfromutah
    The problem was my connected bluetooth keyboard.

  • SharePoint 2007:Cannot connect to the configuration database.

    The share point 2007 server under Windows Server 2008 R2 runs well formerly, but suddenly the user can't visit the site with error on page:
    Cannot connect to the configuration database.
    I also checked windows log with bellow main errors：
    Log Name:      Application
    Source:        Office Server Search
    Date:          2015/2/28 22:30:47
    Event ID:      10034
    Task Category: Gatherer
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      ***
    Description:
    Could not access the Search service configuration database.
    Context: Application 'b9f7f366-4027-4923-b5ce-b93c132df7c3'
    Details:
     Unspecified error
     (0x80004005)
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Office Server Search" />
        <EventID Qualifiers="49152">10034</EventID>
        <Level>2</Level>
        <Task>3</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2015-02-28T14:30:47.000000000Z" />
        <EventRecordID>2323514</EventRecordID>
        <Channel>Application</Channel>
        <Computer>***</Computer>
        <Security />
      </System>
      <EventData>
        <Data>
    Context: Application 'b9f7f366-4027-4923-b5ce-b93c132df7c3'
    Details:
     Unspecified error
     (0x80004005)</Data>
      </EventData>
    </Event>
    ======================================
    Log Name:      Application
    Log Name:      Application
    Source:        Windows SharePoint Services 3
    Date:          2015/2/28 22:30:50
    Event ID:      5586
    Task Category: Database
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      ***
    Description:
    Unknown SQL Exception 64 occured. Additional error information from SQL Server is included below.
    A connection was successfully established with the server, but then an error occurred during the login process. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Windows SharePoint Services 3" />
        <EventID Qualifiers="0">5586</EventID>
        <Level>2</Level>
        <Task>484</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2015-02-28T14:30:50.000000000Z" />
        <EventRecordID>2323517</EventRecordID>
        <Channel>Application</Channel>
        <Computer>***</Computer>
        <Security />
      </System>
      <EventData>
        <Data>64</Data>
        <Data>A connection was successfully established with the server, but then an error occurred during the login process. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)</Data>
      </EventData>
    </Event>
    ==================================================
    Source:        Windows SharePoint Services 3
    Date:          2015/2/28 22:31:00
    Event ID:      27745
    Task Category: General
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      ***
    Description:
    The description for Event ID 27745 from source Windows SharePoint Services 3 cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on
    the local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event:
    #50071: Unable to connect to the database SP_Config on ***.  Check the database connection information and make sure that the database server is running.
    the message resource is present but the message is not found in the string/message table
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Windows SharePoint Services 3" />
        <EventID Qualifiers="14130">27745</EventID>
        <Level>2</Level>
        <Task>1105</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2015-02-28T14:31:00.000000000Z" />
        <EventRecordID>2323520</EventRecordID>
        <Channel>Application</Channel>
        <Computer>***</Computer>
        <Security />
      </System>
      <EventData>
        <Data>#50071: Unable to connect to the database SP_Config on ***.  Check the database connection information and make sure that the database server is running.</Data>
      </EventData>
    </Event>
    Please kindly support to find the root cause and guide how to fix it ASAP.
    Many appreciations for your hellp in advance!
    Note:
    1)As checked, SQL server service is running well;
    2)Web server log under the path C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\LOGS with bellow errors:
    03/02/2015 11:25:53.28  mssearch.exe (0x0F0C)                    0x08FC Search Server Common         
     GathererSql                    0 Monitorable CSqlCrawl::ExecuteCommand() Failed in GetSession, Error is 0x80004005 - File:d:\office\source\search\search\gather\server\gatherobj.cxx
    Line:9654 
    03/02/2015 11:25:53.39  mssearch.exe (0x0F0C)                    0x08FC Search Server Common           Common                       
     0 Monitorable Application b9f7f366-4027-4923-b5ce-b93c132df7c3, resource 1: pIDBInitialize->Initialize error. Failed to create a non fast load session. - File:d:\office\source\search\search\searchdll\resourcemanagerimpl.cpp Line:608 
    03/02/2015 11:25:53.39  mssearch.exe (0x0F0C)                    0x08FC Search Server Common           Common                       
     0 Monitorable CResourceManager::CreateSession Error creating non fastload session 'Provider=SQLOLEDB;Extended Properties='Server=***;Database=SP_SharedServices_Search;Trusted_Connection=yes;App=Windows SharePoint Services;Timeout=15';'. - File:d:\office\source\search\search\searchdll\resourcemanagerimpl.cpp
    Line:658 
    03/02/2015 11:25:53.39  mssearch.exe (0x0F0C)                    0x08FC Search Server Common           UtilCommon                   
     0 Monitorable Dumping error record [0]:   Source: Microsoft OLE DB Provider for SQL Server   HRESULT: 0x80004005   Code: 11   Description: [DBNETLIB][ConnectionRead (recv()).]General network error. Check
    your network documentation. - File:d:\office\source\search\common\pkmutild\atldbext.cxx Line:1250 
    03/02/2015 11:25:53.39  mssearch.exe (0x0F0C)                    0x08FC Search Server Common           GathererSql                  
     0 Monitorable CSqlCrawl::ExecuteCommand() Failed in GetSession, Error is 0x80004005 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:9654

    Hi,
    In this forum we mainly discuss questions and feedbacks about Office products, since your question is about SharePoint, I suggest you post the question in SharePoint forum to get further assistance:
    https://social.technet.microsoft.com/Forums/office/en-US/home?category=sharepoint
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
    Regards,
    Melon Chen
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Cannot connect to the configuration database

    I tried to configure my server with active directory after I have successfully configured sharepoint . For a mistake , they made me delete the active directory and now when I try to connect to the admin section or site page it me give the following error :
    "Cannot connect to the configuration database"
    Deleting the active directory ; I noticed that all the other users have disappeared and the service : SQL AGENT ( Sharepoint ) not run and the error is :
    " This installation of SQL Server Agent is disabled. The edition of SQL Server that installed this service does not support SQL Server Agent." Thank you for the Help

    Was the active directory server that you removed the last active directory server in the farm?  If so then your only two real choices are to rebuild everything from scratch or restore everything from backup.
    If it was just that you were trying to make the SharePoint server into a Domain Controller, then I still think you may need to rebuild. But you can try re-adding the SharePoint server to the Domain.  It may have lost its Domain membership when you removed
    AD from it and gone back to being a standalone server.
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • Migration on active directory from 2003 to 2008 and SharePoint error Cannot connect to the configuration database.

    Hi all,
    In advance i`m thankful for your help,
    I come across a problem while migrating the Active Directory from Windows Server 2003 to Windows Server 2008 R2,
    SharePoint 2010 is getting this error Cannot connect to the configuration database. The same goes for the Administrative page,
    Nothing is change in the MySql database, same log in, same server name, i guess it have something to do with the SharePoint Farm,
    My question is will reinstalling the SharePoint do the job? Or is there an easy way to get back on my old track?
    I`ve try to sync users... no good
    PS C:\Users\administrator.SERVERM> if($configManager.IsSynchronizationRunning()
    -eq $false)
    >> {
    >> $configManager.StartSynchronization($true)
    >> Write-Host "Started Synchronizing"
    >> }
    >> else
    >> {
    >> Write-Host "Already Synchronizing"
    >> }
    >>
    Can someone explain a little bit more about this:
    6.     
    Can they talk to each other?
    Verify that SharePoint is using the correct IP address for the SQL server. To do this, run the ping command on the Windows SharePoint Services server.
    Verify that the SharePoint server is obtaining the correct IP address for the SQL server from DNS. To do this, run the
    nslookup command from the SharePoint Server.
    Make sure that there are no incorrect entries for the SQL server. To do this, examine the Hosts file on the SharePoint server. This file is in the following location:
    %systemroot%\system32\drivers\etc\Hosts
    On the SharePoint server, look for SQL client aliases. To do this, follow these steps: Click
    Start, click Run, and then type cliconfg in the
    open box.
    Click the Alias tab. By default, there are no SQL client aliases. If you have any aliases for the SQL server, verify that they are correct, or remove them.
    Open the SQL Server Configuration Manager (Start SQL Server 2008  Configuration Tools  SQL Server Configuration Manager
    Navigate to the SQL Server Network Configuration  Protocols for MSSQLSERVER node in the tree view
    Enable TCP/IP and Named Pipes (you’ll be warned that these changes will not apply until the service is shut down)
    Aleksandar Delcevski, Web-administrator School of Journalism and Public Relations Jurij Gagarin 17-1/1, 1000 Skopje, R. Macedonia t: + 389 2 3090 004 mob: +38972 257 565 [email protected]; www.vs.edu.mk; www.medium.edu.mk; www.unescochair-vs.edu.mk

    Hiya,
    I don't think it is necessary to reinstall.
    You should just confirm that your basic infrastructure is working.
    1: On the SharePoint server, open cmd and write ping <SQL server name>
    2: On the SharePoint server, open cmd and write nslookup <SQL server name>
    Basically the steps outlined here, is the best way to start:
    6.     
    Can they talk to each other?
    Verify that SharePoint is using the correct IP address for the SQL server. To do this, run the ping command on the Windows SharePoint Services server.
    Verify that the SharePoint server is obtaining the correct IP address for the SQL server from DNS. To do this, run the
    nslookup command from the SharePoint Server.
    Make sure that there are no incorrect entries for the SQL server. To do this, examine the Hosts file on the SharePoint server. This file is in the following location:
    %systemroot%\system32\drivers\etc\Hosts
    On the SharePoint server, look for SQL client aliases. To do this, follow these steps: Click
    Start, click Run, and then type cliconfg in the
    open box.
    Click the Alias tab. By default, there are no SQL client aliases. If you have any aliases for the SQL server, verify that they are correct, or remove them.
    Open the SQL Server Configuration Manager (Start SQL Server 2008  Configuration Tools  SQL Server Configuration Manager
    Navigate to the SQL Server Network Configuration  Protocols for MSSQLSERVER node in the tree view
    Enable TCP/IP and Named Pipes (you’ll be warned that these changes will not apply until the service is shut down)

  • How do web front ends find the configuration database (moving whole farm to new AD forest)

    We are exploring, as a possible course of action, moving our SharePoint 2007 medium farm to a different Active Directory forest (2008). There is a two way transitive trust between the source and target domains.
    I have established that with such a trust it's possible to add content databases on a SQL instance in another forest, so moving content is not a big issue; we'd stand up new instances and move them: the user accounts are almost all in the target domain anyway.
    However, we have a good deal of customization, including a third-party application that no longer has any support and has historically been appallingly difficult to upgrade/install fresh.
    How do web front end servers find the SQL instance containing the configuration database? If the farm credentials had been previously changed to an account in the target domain, all services stopped and the configuration database moved to a new instance
    with a DNS alias, would the database appear to be in the same location when SQL and SharePoint services were started on (logically) moved web front ends?

    Here is more or less the high-level process for SharePoint 2007:
    Mid- to high-level steps.
    0. Full farm backup
    1. Move users to new domain (in AD). Use stsadm -o migrateuser to migrate the old domain accounts to the new ones in SharePoint
    2. Move service accounts to new domain, or create new service accounts
    3. Update the farm to use the service accounts in the new domain
    stsadm -o updatefarmcredentials (service accounts)
    stsadm -o spsearch -farmserviceaccount
    stsadm -o spsearch -farmcontentaccessaccount
    stsadm -o editssp -ssplogin (for each ssp)
    stsadm -o osearch -farmserviceaccount
    SSO and any other remaining service accounts (CA -> Ops -> Service Accounts)
    Default content access account (SSP -> Search Settings -> Default content access account)
    Customizations (if there are service accounts associated with these)
    3.5 Manual steps
    Application pool accounts
    Update permissions for SQL Logins to make sure the new accounts match the permissions for the old accounts
    Add the appropriate new accounts to the DCOM IIS WAMREG Admin Service
    4. Update the SQL Server service accounts. If SQL Server is shared with other applications you'll want to update the SQL Logins for these other applications as necessary and the SQL Server service accounts (DB Engine, DB Agent, Reporting Services, etc.). Might
    not be necessary if this has already been done or if the SQL server is not changing domains. 
    5. Shut down all services on all servers in the farm (this includes SQL if you are moving to the new domain).
    6. Change domain membership of all farm servers, reboot or perhaps shutdown and bring back up in the following order:
    1. SQL. Verify SQL Server is running and accessible. Check event logs. Resolve any issues.
    2. Central Admin server. Verify CA is accessible, check event logs. Web apps and some services may not be available if they are on servers that are currently turned off. Don't worry about these (yet).
    3. Application servers, search servers, index, query, other. It's likely some or all of the WFEs will go on at this step. Verify services are accessible as expected. Check event logs. Resolve issues.
    4. Any remaining WFEs. Wash, rinse, repeat.
    7. Assuming everything is running as expected, users can access the sites, the sky did not fall, etc. take a full farm backup.
    Hey look, here are some low-level steps too.
    # updates the account used to run the CA app pool and the timer service
    # must be run on the server that hosts CA
    stsadm -o updatefarmcredentials -identitytype configurableid -userlogin NEWDOMAIN\farm_service_account -password Password123
    # spsearch
    stsadm -o spsearch -farmserviceaccount NEWDOMAIN\search_service_account -farmservicepassword Password123 -farmcontentaccessaccount NEWDOMAIN\crawl_service_account -farmcontentaccesspassword Password123
    # osearch
    stsadm -o osearch -farmcontactemail [email protected] -farmserviceaccount NEWDOMAIN\search_service_account -farmservicepassword Password123
    # ssp service accounts
    stsadm -o editssp -title SSP -ssplogin NEWDOMAIN\ssp_service_account -ssppassword Password123
    # Manual steps
    SSP Admin -> Search Settings -> Default Content Access Account
    Application pools: CA -> Operations -> Service Accounts -> Web Application Pool (or use gl-updateapppoolaccount if available)
    iisreset /noforce
    Copy SQL permissions to the new accounts. Not sure why this doesn't happen.
    SSP Service Account
    Farm Account
    Setup Account (not copied because it doesn't own anything, just used to kick off the DB for the other accounts)
    Search Service
    Add accounts to DCOM not sure why this didn't happen
    Component Services -> Computer -> My Computer -> DCOM Config -> IIS WAMREG Service
    Farm account
    Application pool accounts
    Search Service
    SSP Service
    SSP Admin
    Then the fun part. Move the server into the new domain.
    Check for AAMs to see if they reference the current domain. If so, change to the new one.
    Stop all SP services. Join new domain.
    The computer name is a netbios name in SP, this should be painless.
    Some general notes from my experience doing this:
    1. There is no way to update application pool identities with stsadm (I haven't explored using Powershell). You have to go through CA -> Service Accounts to update these.
    2. Some SQL logins and permissions were not created. I compared the permissions before to the permissions after and copied the ones that didn't transfer. This resolved all database access issues.
    3. Had to grant permissions for the service accounts in the DCOM configuration for the IIS WAMREG admin service. I expected this to happen automatically but was not surprised given the history of CLSID 61738644-F196-11D0-9953-00C04FD919C1.

  • The configuration file did not contain well formed AppV configuration XML - When using Office 2013 ODT package

    All,
    I'm experiencing an issue where when using the Office 2013 package pulled down from ODT, that if I try to change the locations of either InfoPath Filler 2013 or Publisher 2013 from the default of Microsoft Office 2013 then I receive the message "The
    configuration file did not contain well formed AppV configuration XML. Please check the management server event log for more information". If I check Applications and Services\Microsoft\AppV\Server-Management\Admin the error displayed there is "An
    error was encountered parsing dynamic configuration file '0'. However I am able to change the shortcut location for all other applications except the above 2. I've tried redownloading the files using the ODT and also changing the version number (so far I've
    tried both the 15.0.4631.1002 and 15.0.4659.1001 with the same result).
    As all I'm interested in so far is having a package which contains Visio and Project I've tried following the article to exclude all the other Office elements:
    http://technet.microsoft.com/library/jj219426(v=office.15).aspx#BKMK_ExcludeAppElement. However the package looks to be the same and when I load it into the management console all the options and elements to Office 2013 are available like they were before
    when I hadn't set the exclude tags so I'm not sure whether the ExcludeApp parameters actually work correctly.
    This then brings me onto the 3rd issue I've experienced. I have a group for the Visio users and I've set custom security for them to have Visio delivered to them but not Project and then a seperate group for just Project users who will have Project delivered
    to them but not have Visio. When testing this sometimes seems to work but other times it seems to trip out and a user just in the Project or Visio group will get all of the Office 2013 applications and under the default location of Microsoft Office 2013. When
    trying to spot correlation with this it appears random and can happen to any user on any device. We have sequenced a few applications ourselves where different parts are needed for different users and we have successfully managed this using different security
    groups for different applications, just as I'm trying here with Office 2013.
    Has anyone else experienced the issue with the "did not contain well formed XML" as at the start of the post and how were you able to resolve this? Also has anyone any advice on how to troubleshoot the issue with the security seeming to trip out
    and publish all applications within a package to a user regardless of whether they are in the correct group or not?
    The management / publishing servers are 5.0.1224.0 which is SP1 HF4 and the clients are on SP2 HF5.
    Thanks

    Nicke,
    The config files are UTF-8. I did find the same article as yourself, however when searching for the value ‘TakeoverExtensionPointsFrom46=’ within either of the configuration.xml files that text isn’t found.
    No sinister reason not to share the file used, just it’s the same structure as referenced in the article:
    http://technet.microsoft.com/en-us/library/dn745895(v=office.15).aspx. The only difference being that I’m using ProPlusVolume and I’ve set a version number (which is the October
    2014 update). I’ve even looked to follow the above example as closely as possible in just using the ExcludeApp ID of Access and InfoPath, just to try and prove the process. However I still get the usual full package. The version of the Click-to-Run setup.exe
    I’m using is 15.0.4623.1001, so later than the version specified at the end of that article which is 15.0.4619.1000. Where can I expect to see the elements excluded? Will it be when loading the package into the management console or would it just not appear
    on the machine when delivered?
    <Configuration>
      <Add SourcePath="C:\OfficeDeploymentToolV2" Version="15.0.4659.1001" OfficeClientEdition="32">
        <Product ID="ProPlusVolume">
          <Language ID="en-us" />
    <ExcludeApp ID="Access" />
    <ExcludeApp ID="InfoPath" />
        </Product>
      </Add>
    </Configuration>
    3). We’ve not used global publishing in our environment yet so I will try that. I’ve set both GlobalRefreshEnabled and GlobalRefreshOnLogon to True and when using the command Get-AppvPublishingServer on the client I’m testing with I can see this is pulled
    through correctly. I’ve also added the client name to the AD group used to grant access to the package and it is published. However nothing is pulling through onto the Client, so are there any steps I’ve missed or misinterpreted when looking to set this up?
    I guess the global publishing is there to keep in with licensing for Office being per device? On a slight aside, as Windows licensing is being changed to allow per user licensing
    http://www.zdnet.com/microsoft-to-make-per-user-windows-licensing-available-to-enterprise-customers-7000035401/ does anyone know if there are any plans to allow for Office / Project / Visio licenses to go per user as well? We’re a volume license customer
    rather than subscription based so I think a lot of the options to selectively deploy Visio and Project are excluded for us.
    Dan,
    Ok that explains why the security could be tripping out then and leading to this result. As above I’ll try with global publishing and see how I get on.
     From what I’ve read / watched  I think only one Office 2013 package can be published to a machine, so we would be unable to have a separate package for Visio and a separate package for Project and then attempt to deliver
    them both together. If a user wanted both Project and Visio then I guess we’d need to have a combined Project and Visio package to cover than scenario, but then 2 more separate Project and Visio packages for those who would only want either Project and Visio
    (I think).
    The scenario we’re looking at is to see whether we are able to deliver Project and / or Visio to different users through an AppV package and this will then cover users on XenApp or on fat clients. Only a small proportion of our
    users will need access to Project and / or Visio so therefore we’d only have a small amount of Project and Visio licenses.
    However from what I’ve tested up to this point and from what I’ve picked up from Forum posts / watched on TechEd sessions is that as publishing is Global and is unable to use different security groups for different elements of the
    suite, then using Office through AppV is only suitable if you will be delivering the whole suite (including Project and Visio) to all of your users. So in a scenario where you’d only want certain elements to be delivered to a handful of users then you’d need
    to keep with traditional ESD methods to have this installed onto fat clients and steer clear of XenApp. If wanting to install to XenApp then a lockdown tool like AppSense or AppLocker would also need to be brought into the equation.
    Is my understanding above correct or have I missed some options / methods?
    If the full Office package is always delivered but a company only has Office licenses and no Project and Visio licenses for all its users, how do they stop Project and Visio being delivered and being available? Or again if you have
    this use case is the AppV method one which will be unsuitable?
    Thanks

  • After upgrading ACS 3.3.1 to 4.2 on windows the local database is not working

    Hi,
    I have upgaded the ACS 3.3.1 for windows server to 4.2. Everything went fine but the local database is not working.
    The CD is an upgrade kit from 3.x to 4.2 on windows. I tried to install directly the 4.2 I was able to install but integration with AD/LDAp is not working. Anysay its an upgrade kit so I cant expect it shoud work when install drectly the 4.2 but by upgrading from 3.3 to 4.2 everything should work fine.
    I followed the upgradation path as recomended.
    Also we have a requirment that once it is upgraded to 4.2 we need to shift the whole thing from the physical server to a virtual machine on VMware ESX server 3.5.
    Can anybody pls guide me if anything else to do after the upgradation.
    Thanks & Regards
    Sachi

    Hi Javier,
    First of all I was facing a problem of restoring the old database of 3.3 to 4.2. Somehow I overcame that issue by following the below steps. Now local authentication is working fine but AD/other External database authentication is not working. As you told the setting for the unknown users are configured to fetch the credentials from the external database if it is not in the local database.
    Do we need to do anything in the AD itself?
    Regards
    Sachi
    Steps for ACS upgrade to 4.2 version
    Below are the requested steps mentioned for the up gradation from ACS 3.3.2 to ACS 4.2.
            1)     Take a configuration backup from existing ACS. ACS--->System
    configuration----> ACS Backup
    2)    now if you have  ACS 3.3.2 on server. take backup of the ACS
    3)   Insert the cd or if you have the set up on the system then  Run the setup of ACS 3.3.4. During the process it will prompt you to
    upgrade existing configuration. Make sure you check that option else we will
    loose the database. Now you need to hit next.next to finish the 3.3.4 upgrade.
    4)     Once you are at 3.3.4, take a backup and keep it handy.
    5)     Run the setup of 4.1.1. During this process it will prompt you to
    upgrade existing configuration. Make sure you check that option else we will
    loose the database. Now you need to hit next.next to finish the 4.1 upgrade.
    6)Once you are at 4.1.1.24 take a backup and keep it handy.
    7)     Run the setup of 4.2. During this process it will prompt you to
    upgrade existing configuration. Make sure you check that option else we will
    loose the database. Now you need to hit next.next to finish the 4.2 upgrade.
    8)     Once you are at 4.2 take a backup and keep it handy. Now run the
    patch 12 and take a backup again.
    9)     Now fresh install 4.2 on your new production server and install patch
    12. Restore the 4.2 patch 12 backup and you should be all set.

  • E-Rec Reference Code in the Publication tab should not appear after enddate

    hi,
    There is a requirement from the client after the end date of the publication ,the reference code should not be displayed to the candidate in the Candidate page ,presently the same is manually done in the system by changing the status to withdrawn.
    Is there any way by which we can automate the process by change in customising by which the reference code does not appear after the end date
    Please provide a solution if something can be done in the standard setting or do we require any Zworkflow to be developed for the same.
    Regards
    RK

    Hi RK,
    this is nothing the standard supports.
    But I would not use a workflow here. As this is a mass handling workflow is no good idea. This is a task for a customer periodical service. Just build a class implementing the periodical service interface which gets all released publications which have a publication end in the past and status released and change their status using the cl_hrrcf_posting_inst_bl. This should be done in a couple of hours. Add the customizing and the issue is solved.
    A requirement in this context where a customer workflow is quite handy in my opinion is a customer workflow which closes all postings and withdraws released publications when you close the requisition. This reduces the steps a recruiter has to do and ensures that no candidate applies although you are already done with the requisition.
    Kind Regards
    Roman

  • Error creating a new user profile service application: The specified database is not a valid synchronization database

    When trying to create a new user profile service application on a new SharePoint install I get the following error:
    "The specified database is not a valid synchronization database"
    The installation then fails and does not create the third database. 
    I found some threads with similar problems but it involved upgrading an existing db.  In this case we want to create a new one.  Here is the relevant ULS log info:
    Starting schema provisioning of SynchronizationDatabase 'SP15_TEST_ENT_SyncDB'
    Provisioning the SP15_TEST_ENT_SyncDB database with the script at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\Template\SQL\SPS\drop_procs.sql.
    Provisioning the SP15_TEST_ENT_SyncDB database with a script stream.
    Ensuring that the SP15_TEST_ENT_SyncDB database exists . . .
    The SP15_TEST_ENT_SyncDB database does not exist. 
    It will now be created.
    Setting the AutoClose option to False on the database SP15_TEST_ENT_SyncDB.
    Setting the ArithAbort option to True on the database SP15_TEST_ENT_SyncDB.
    Setting the TruncLogOnChkpt option to True on the database SP15_TEST_ENT_SyncDB.
    Starting schema evaluation of existing SynchronizationDatabase 'SP15_TEST_ENT_SyncDB'
    Validate Database: validating sync database
    Validate Database: validation failed: Error code -2
    Application error when access /_admin/NewProfileServiceApplicationSettings.aspx, Error=The specified database is not a valid synchronization database 
     at Microsoft.Office.Server.Administration.SynchronizationDatabase.Provision()   
     at Microsoft.Office.Server.Administration.UserProfileApplication.Provision()   
     at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.NewProfileServiceSettingsPage.DoCreateApplication()   
     at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.NewProfileServiceSettingsPage.OnOkButtonClick(Object sender, EventArgs e)   
     at System.EventHandler.Invoke(Object sender, EventArgs e)   
     at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)   
     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    Microsoft.SharePoint.Administration.SPDatabaseException: The specified database is not a valid synchronization database  
     at Microsoft.Office.Server.Administration.SynchronizationDatabase.Provision()   
     at Microsoft.Office.Server.Administration.UserProfileApplication.Provision()   
     at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.NewProfileServiceSettingsPage.DoCreateApplication()   
     at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.NewProfileServiceSettingsPage.OnOkButtonClick(Object sender, EventArgs e)   
     at System.EventHandler.Invoke(Object sender, EventArgs e)   
     at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)   
     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.SharePoint.Administration.SPDatabaseException:
    The specified database is not a valid synchronization database   
     at Microsoft.Office.Server.Administration.SynchronizationDatabase.Provision()   
     at Microsoft.Office.Server.Administration.UserProfileApplication.Provision()   
     at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.NewProfileServiceSettingsPage.DoCreateApplication()   
     at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.NewProfileServiceSettingsPage.OnOkButtonClick(Object sender, EventArgs e)   
     at System.EventHandler.Invoke(Object sender, EventArgs e)   
     at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)   
     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)   
     at System.Web.UI.Page.HandleError(Exception e)   
     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)   
     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)   
     at System.Web.UI.Page.ProcessRequest()   
     at System.Web.UI.Page.ProcessRequest(HttpContext context)   
     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()   
     at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
    I Tried to create another one under a different name (databases also) and I get the same error. 
    The SharePoint instance has the march mandatory update installed.  The sql instance we are using is an existing SQL cluster for other SharePoint poc's. 
    Has anybody seen this issue before? 

    I had the same problem and could not figure out what was wrong for the longest time.  I then had the idea to check in the model system database to see if there were any extra custom tables in that database.  Any tables that are in the model database
    are put into any new database when it is created.  I had some custom tables in the model database so I deleted the custom tables in the model database and deleted the failed user profile service application and its databases and then tried to recreate
    the user profile service application again and it worked with no errors

  • The Favorite iView does not appear in the Portal

    The Favorite iView does not appear in the Portal - instead I get the following runtime error:
    com.sap.portal.pcm.Title - An exception occurred while processing your request
    When I look it up in the log file - I get the following:
    Date : 06/092008
    Time : 7:58:50:500
    Message : 07:58_04/06/08_3852950
    EXCEPTION
    com.sapportals.portal.prt.component.PortalComponentException: Error in init method
    Component : com.sap.netweaver.coll.appl.ui.room.CollaborationDetailedNavigation
    at com.sapportals.portal.prt.component.PortalComponentContext.init(PortalComponentContext.java:251)
    at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.refresh(PortalComponentContextItem.java:271)
    at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.getContext(PortalComponentContextItem.java:316)
    at com.sapportals.portal.prt.component.PortalComponentRequest.getComponentContext(PortalComponentRequest.java:387)
    at com.sapportals.portal.pb.PageBuilder.createIviewProfile(PageBuilder.java:443)
    at com.sapportals.portal.pb.PageBuilder.createiView(PageBuilder.java:391)
    at com.sapportals.portal.pb.PageBuilder.createAndAddiViews(PageBuilder.java:233)
    at com.sapportals.portal.pb.PageBuilder.doOnNodeReady(PageBuilder.java:635)
    at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:388)
    at com.sapportals.portal.pb.PageBuilder.handleEvent(PageBuilder.java:815)
    at com.sapportals.portal.prt.component.CachablePortalComponent.handleEvent(CachablePortalComponent.java:703)
    at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:252)
    at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:368)
    at com.sapportals.portal.prt.pom.AbstractNode.addChildNode(AbstractNode.java:340)
    at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:642)
    at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
    at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Caused by: com.sapportals.portal.prt.core.broker.PortalComponentInstantiationException: Could not instantiate implementation class com.sapportals.portal.navigation.CollaborationNavTree of Portal Component com.sap.netweaver.coll.appl.ui.room.CollaborationDetailedNavigation because: Could not instantiate implementation class
    at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getInstanceInternal(PortalComponentItemFacade.java:269)
    at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getComponentInstance(PortalComponentItemFacade.java:160)
    at com.sapportals.portal.prt.core.broker.PortalComponentItem.getComponentInstance(PortalComponentItem.java:732)
    at com.sapportals.portal.prt.component.PortalComponentContext.getComponent(PortalComponentContext.java:103)
    at com.sapportals.portal.prt.component.PortalComponentContext.init(PortalComponentContext.java:242)
    ... 35 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: http://PortalApplicationItem._prepare: com.sap.netweaver.coll.appl.ui.room
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:427)
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem._refresh(PortalApplicationItem.java:507)
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.getCoreLoader(PortalApplicationItem.java:1360)
    at com.sapportals.portal.prt.core.broker.PortalComponentItem.getClassLoader(PortalComponentItem.java:569)
    at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getClassLoader(PortalComponentItemFacade.java:102)
    at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getInstanceInternal(PortalComponentItemFacade.java:228)
    ... 39 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: http://PortalApplicationItem._prepare: com.sap.km.application
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:427)
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:387)
    ... 44 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: http://PortalApplicationItem._prepare: com.sap.km.cm.ui.flex
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:427)
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:387)
    ... 45 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: http://PortalApplicationItem._prepare: com.sap.netweaver.bc.crt
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:427)
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:387)
    ... 46 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: http://PortalApplicationItem._prepare: com.sap.portal.runtime.config.component
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:427)
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:387)
    ... 47 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception during start of application: SAPJ2EE::library:com.sap.tc.di.scm.transport_api
    at com.sapportals.portal.prt.core.broker.SAPJ2EEApplicationItem.prepare(SAPJ2EEApplicationItem.java:323)
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:387)
    ... 48 more
    Caused by: com.sapportals.portal.prt.core.broker.SAPJ2EELibraryNotFoundException: Could not find Library SAPJ2EE::library:com.sap.tc.di.scm.transport_api
    at com.sapportals.portal.prt.core.broker.SAPJ2EEApplicationItem.prepare(SAPJ2EEApplicationItem.java:277)
    ... 49 more
    Severity : Error
    Category :
    Location : com.sap.portal.prt.runtime
    Application : sap.com/irj
    Thread : ThreadPRT-Async 1,5,PRT-Async
    Datasource : 1212584461125:E:\usr\sap\DEP\JC00\j2ee\cluster\server0\log\defaultTrace.trc
    Message ID : 00145E336A6A0091000000010000098C00044ED6CA463F40
    Source Name : com.sap.portal.prt.runtime
    Argument Objs : com.sapportals.portal.prt.component.PortalComponentException: Error in init method
    Component : com.sap.netweaver.coll.appl.ui.room.CollaborationDetailedNavigation
    at com.sapportals.portal.prt.component.PortalComponentContext.init(PortalComponentContext.java:251)
    at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.refresh(PortalComponentContextItem.java:271)
    at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.getContext(PortalComponentContextItem.java:316)
    at com.sapportals.portal.prt.component.PortalComponentRequest.getComponentContext(PortalComponentRequest.java:387)
    at com.sapportals.portal.pb.PageBuilder.createIviewProfile(PageBuilder.java:443)
    at com.sapportals.portal.pb.PageBuilder.createiView(PageBuilder.java:391)
    at com.sapportals.portal.pb.PageBuilder.createAndAddiViews(PageBuilder.java:233)
    at com.sapportals.portal.pb.PageBuilder.doOnNodeReady(PageBuilder.java:635)
    at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:388)
    at com.sapportals.portal.pb.PageBuilder.handleEvent(PageBuilder.java:815)
    at com.sapportals.portal.prt.component.CachablePortalComponent.handleEvent(CachablePortalComponent.java:703)
    at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:252)
    at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:368)
    at com.sapportals.portal.prt.pom.AbstractNode.addChildNode(AbstractNode.java:340)
    at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:642)
    at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
    at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Caused by: com.sapportals.portal.prt.core.broker.PortalComponentInstantiationException: Could not instantiate implementation class com.sapportals.portal.navigation.CollaborationNavTree of Portal Component com.sap.netweaver.coll.appl.ui.room.CollaborationDetailedNavigation because: Could not instantiate implementation class
    at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getInstanceInternal(PortalComponentItemFacade.java:269)
    at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getComponentInstance(PortalComponentItemFacade.java:160)
    at com.sapportals.portal.prt.core.broker.PortalComponentItem.getComponentInstance(PortalComponentItem.java:732)
    at com.sapportals.portal.prt.component.PortalComponentContext.getComponent(PortalComponentContext.java:103)
    at com.sapportals.portal.prt.component.PortalComponentContext.init(PortalComponentContext.java:242)
    ... 35 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: http://PortalApplicationItem._prepare: com.sap.netweaver.coll.appl.ui.room
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:427)
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem._refresh(PortalApplicationItem.java:507)
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.getCoreLoader(PortalApplicationItem.java:1360)
    at com.sapportals.portal.prt.core.broker.PortalComponentItem.getClassLoader(PortalComponentItem.java:569)
    at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getClassLoader(PortalComponentItemFacade.java:102)
    at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getInstanceInternal(PortalComponentItemFacade.java:228)
    ... 39 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: http://PortalApplicationItem._prepare: com.sap.km.application
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:427)
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:387)
    ... 44 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: http://PortalApplicationItem._prepare: com.sap.km.cm.ui.flex
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:427)
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:387)
    ... 45 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: http://PortalApplicationItem._prepare: com.sap.netweaver.bc.crt
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:427)
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:387)
    ... 46 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: http://PortalApplicationItem._prepare: com.sap.portal.runtime.config.component
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:427)
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:387)
    ... 47 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception during start of application: SAPJ2EE::library:com.sap.tc.di.scm.transport_api
    at com.sapportals.portal.prt.core.broker.SAPJ2EEApplicationItem.prepare(SAPJ2EEApplicationItem.java:323)
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:387)
    ... 48 more
    Caused by: com.sapportals.portal.prt.core.broker.SAPJ2EELibraryNotFoundException: Could not find Library SAPJ2EE::library:com.sap.tc.di.scm.transport_api
    at com.sapportals.portal.prt.core.broker.SAPJ2EEApplicationItem.prepare(SAPJ2EEApplicationItem.java:277)
    ... 49 more
    Arguments : com.sapportals.portal.prt.component.PortalComponentException: Error in init method
    Component : com.sap.netweaver.coll.appl.ui.room.CollaborationDetailedNavigation
    at com.sapportals.portal.prt.component.PortalComponentContext.init(PortalComponentContext.java:251)
    at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.refresh(PortalComponentContextItem.java:271)
    at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.getContext(PortalComponentContextItem.java:316)
    at com.sapportals.portal.prt.component.PortalComponentRequest.getComponentContext(PortalComponentRequest.java:387)
    at com.sapportals.portal.pb.PageBuilder.createIviewProfile(PageBuilder.java:443)
    at com.sapportals.portal.pb.PageBuilder.createiView(PageBuilder.java:391)
    at com.sapportals.portal.pb.PageBuilder.createAndAddiViews(PageBuilder.java:233)
    at com.sapportals.portal.pb.PageBuilder.doOnNodeReady(PageBuilder.java:635)
    at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:388)
    at com.sapportals.portal.pb.PageBuilder.handleEvent(PageBuilder.java:815)
    at com.sapportals.portal.prt.component.CachablePortalComponent.handleEvent(CachablePortalComponent.java:703)
    at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:252)
    at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:368)
    at com.sapportals.portal.prt.pom.AbstractNode.addChildNode(AbstractNode.java:340)
    at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:642)
    at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
    at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Caused by: com.sapportals.portal.prt.core.broker.PortalComponentInstantiationException: Could not instantiate implementation class com.sapportals.portal.navigation.CollaborationNavTree of Portal Component com.sap.netweaver.coll.appl.ui.room.CollaborationDetailedNavigation because: Could not instantiate implementation class
    at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getInstanceInternal(PortalComponentItemFacade.java:269)
    at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getComponentInstance(PortalComponentItemFacade.java:160)
    at com.sapportals.portal.prt.core.broker.PortalComponentItem.getComponentInstance(PortalComponentItem.java:732)
    at com.sapportals.portal.prt.component.PortalComponentContext.getComponent(PortalComponentContext.java:103)
    at com.sapportals.portal.prt.component.PortalComponentContext.init(PortalComponentContext.java:242)
    ... 35 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: http://PortalApplicationItem._prepare: com.sap.netweaver.coll.appl.ui.room
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:427)
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem._refresh(PortalApplicationItem.java:507)
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.getCoreLoader(PortalApplicationItem.java:1360)
    at com.sapportals.portal.prt.core.broker.PortalComponentItem.getClassLoader(PortalComponentItem.java:569)
    at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getClassLoader(PortalComponentItemFacade.java:102)
    at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getInstanceInternal(PortalComponentItemFacade.java:228)
    ... 39 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: http://PortalApplicationItem._prepare: com.sap.km.application
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:427)
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:387)
    ... 44 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: http://PortalApplicationItem._prepare: com.sap.km.cm.ui.flex
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:427)
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:387)
    ... 45 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: http://PortalApplicationItem._prepare: com.sap.netweaver.bc.crt
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:427)
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:387)
    ... 46 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: http://PortalApplicationItem._prepare: com.sap.portal.runtime.config.component
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:427)
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:387)
    ... 47 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception during start of application: SAPJ2EE::library:com.sap.tc.di.scm.transport_api
    at com.sapportals.portal.prt.core.broker.SAPJ2EEApplicationItem.prepare(SAPJ2EEApplicationItem.java:323)
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:387)
    ... 48 more
    Caused by: com.sapportals.portal.prt.core.broker.SAPJ2EELibraryNotFoundException: Could not find Library SAPJ2EE::library:com.sap.tc.di.scm.transport_api
    at com.sapportals.portal.prt.core.broker.SAPJ2EEApplicationItem.prepare(SAPJ2EEApplicationItem.java:277)
    ... 49 more
    Dsr Component : n/a
    Dsr Transaction : c1bb8390323511dd980100145e336a6a
    Dsr User :
    Indent : 0
    Level : 0
    Message Code :
    Message Type : 1
    Relatives :
    Resource Bundlename :
    Session : 52
    Source : com.sap.portal.prt.runtime
    ThreadObject : ThreadPRT-Async 1,5,PRT-Async
    Transaction :
    User : Administrator

    Amir ,
    Check this link , I t will help you
    http://help.sap.com/saphelp_nw04s/helpdata/en/1e/62eae2357c4596bda2476d0a6503e3/frameset.htm
    Set the property "Add to Favourites" to Yes
    Portal Content -> Content provided by SAP -> End user Content -> Standard Portal User -> Default Framework page ---> Edit Object
    Open the Page Title Bar -> Search for the property -> Show 'Add to Browser Favorites'
    and set this property to Yes.
    Now refresh the page. It will show this option.
    Koti Reddy

Maybe you are looking for

  • Thoroughly Disappointed By your lack of understanding!!

    Dear Sirs,  On September 4th this year my Partner, Anastasia and I went to your Champaign, IL Store on Prospect Ave and we specifically asked for a Color Laser Printer that had Duplex facility, we were sold an HP Laser Jet Pro 200, which does not hav

  • Share Library, Apps etc. to family members

    My wife got an iPad and I want to share with here my ITunes library, apps etc. I have found the Support Answer how I can deactivate an account from a family member but how can I connect a Family member to my existing iTunes account? Do my wife need a

  • HT5569 I am having trouble connecting to wifi can you help.

    I am having trouble connecting to wifi can you help.

  • SAP - Microsoft word link

    Hi all, I am trying to put link in MS Word using field code (insert - > Field) as below LINK SAP.OLELinkServer.ItemObject.1 "SAPOLELinkServerDMS" Document.DRAW.DOKNR" \a \t but it is not working as above class is not there sap help reference http://h

  • Photoshop layers not appearing

    Hi, Usually when I import a .psd I get a pull down box asking if I want to import all layers or merge them together. But lately, I can only get it to pop up randomly. It keeps importing the psd as one single picture. What gives? The psd is had 8 laye