The connection between two Tuxedo machines

We want to locate our servers(services) onto different machines, we want to know
:whether the connection,between two machines, is built up at the first time the
servers booted and kept persistently connectted, or just build up the connection
when there comes a request.

Remote machines connect to one another lazily. If you have machines A
(master), B and C, then B and C do not connect until a request is made
between B and C. All machines connect to the master at boot time.
roopesh wrote:
>
The connection is persistent and is not request based.
The machines communicate using BRIDGE.The DBBL which runs
on the primary master machines keep doing sanity checks
and health of BBL at all the machines connected and if
any BBL does not respond for the specified time(set by
DBBLWAIT) in RESOURCES section.then that machine gets partitioned by DBBL.
for more info you can read tuxedo documentation.
Thanks
Roopesh
"YANG YI" <[email protected]> wrote:
We want to locate our servers(services) onto different machines, we want
to know
:whether the connection,between two machines, is built up at the first
time the
servers booted and kept persistently connectted, or just build up the
connection
when there comes a request.

Similar Messages

CPM - Cut the connection between two views - the original and the copied

Hi,
I can copy one logical view to another one.
But since then - every change in one view (the original or the other), takes place in both of the views.
How can I cut the connection between the two logical views?
Thanks,
Carmit

Hi,
Please go through the below link this may helpful to you.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c04b1b26-e7fa-2a10-298c-c8c736f6ca9e
Regards
Sudheer

How to check the Network Connectivity between two systems.

Hello Everyone,
Please let me know different ways to check the network connectivity between two systems other than ping/traceroute commands.
Thank You.
Edited by: 835435 on Jan 20, 2012 11:43 AM
Edited by: 835435 on Jan 20, 2012 11:44 AM

Use snoop.
snoop -d <nic> - will give requests and replies coming/going in/out of the specified NIC.
snoop -d <nic> <MAC address of the target host> - will give requests coming from the required host.

How to make a connection between two wireless sensor networks of different groups through gateway?did any external device or coding is needed?

my objective is to make a connection between two wireless sensor networks....i am using two nodes and one gateway for each wireless sensor network.....what is the procedure for connecting these two wireless sensor networks of different groups

my objective is to make a connection between two wireless sensor networks....i am using two nodes and one gateway for each wireless sensor network.....what is the procedure for connecting these two wireless sensor networks of different groups

How to make the connection between a sale order and an invoice in SDK

Hi,
Im trying to make the connection between a sales order and an invoice using the SDK.
Here is how i create each of them:
Invoice:
public int SalesInvoiceInternalSave(string buisnesspartnerCardCode, DateTime dueDate, double discountPercent, string id, IList<InternalItem> items, ref int invoiceId)
      int res = 0;
      SAPbobsCOM.Documents invoice_entry = (SAPbobsCOM.Documents)Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInvoices);
      invoice_entry.CardCode = buisnesspartnerCardCode;
      invoice_entry.DocDueDate = dueDate;
      invoice_entry.DiscountPercent = discountPercent;
      invoice_entry.Reference2 = id;
      foreach (InternalItem item in items)
        invoice_entry.Lines.WarehouseCode = item.Shopid;
        invoice_entry.Lines.ItemCode = item.Code;
        invoice_entry.Lines.ItemDescription = item.Name;
        invoice_entry.Lines.Quantity = item.Quantity;
        invoice_entry.Lines.UnitPrice = item.Price;
        invoice_entry.Lines.Add();
      res = invoice_entry.Add();
      return res;
Sales order:
    public Boolean SalesOrderInternalSave(string orderId, string buisnesspartnerCardCode, DateTime dueDate, IList<InternalItem> items)
      SAPbobsCOM.Documents order_entry = (SAPbobsCOM.Documents)Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oOrders);
      order_entry.CardCode = buisnesspartnerCardCode;
      order_entry.DocDueDate = dueDate;
      foreach (InternalItem item in items)
        order_entry.Lines.WarehouseCode = item.Shopid;
        order_entry.Lines.ItemCode = item.Code;
        order_entry.Lines.ItemDescription = item.Name;
        order_entry.Lines.Quantity = item.Quantity;
        order_entry.Lines.UnitPrice = item.Price;
        order_entry.Lines.Add();
      int res = order_entry.Add();
      return res == 0;
What do i need to change to get the connection between the two of them?
And how do you insert a amount (not percent) discount into an invoice?
Regards,
Torben

Hi,
Add the sale order, then add the invoice. and while adding the invoice please add the following details to the invoce documen
invoice_entry.Lines.BaseEntry = 'Doc entry of the newly created SO
invoice_entry.Lines.BaseLine = 'Line No of the SO
invoice_entry.Lines.BaseType = 17 'For sales order document type.
Hope it helps,
Vasu Natari.

How to add connection between two Web Part Data Views in sharepoint designer 2013

Hi I have problems with connect two data view
I have a SQL server database named Mini
In Mini database I have two tables: dbo.Table_A and dbo.Table_B
Table_A design and Table_B design
In the internet browser it look like this after I add the connections, the problem is there is no connection when I click at the Blue link id 2 and 3 ??? John's and Jes's Lastname did not show up, the links is dead. that's my problem
The must strange is that, if I do the same below, in sharepoint 2010 designer it do well ?? so what in the .....
Here is my code
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<%@ Page Language="C#" inherits="Microsoft.SharePoint.WebPartPages.WebPartPage, Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>
<%@ Register tagprefix="SharePoint" namespace="Microsoft.SharePoint.WebControls" assembly="Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>
<%@ Register tagprefix="WebPartPages" namespace="Microsoft.SharePoint.WebPartPages" assembly="Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>
<html dir="ltr" xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<meta name="ProgId" content="SharePoint.WebPartPage.Document" />
<meta name="WebPartPageExpansion" content="full" />
<meta http-equiv="X-UA-Compatible" content="IE=10" />
<SharePoint:CssRegistration Name="default" runat="server"/>
</head>
<body>
<form id="form1" runat="server">
<table width="10%"><tr><td>
<WebPartPages:SPWebPartManager runat="server" id="SPWebPartManager">
<SPWebPartConnections>
<WebPartPages:spwebpartconnection ID="g_1660BB6ADC7243088A1BB7F5C196203A" ConsumerConnectionPointID="DFWP Filter Consumer ID" ConsumerID="g_2abfc8f5_0eb3_4711_a5b0_7e7518f56881" ProviderConnectionPointID="DFWP Row Provider ID" ProviderID="g_b70a05bb_a849_423d_8e53_c7ad9ccc18ad">
<WebPartPages:sprowtoparameterstransformer ProviderFieldNames="@ID" ConsumerFieldNames="@ID" />
</WebPartPages:spwebpartconnection>
</SPWebPartConnections>
</WebPartPages:SPWebPartManager>
<asp:ScriptManager runat="server" id="ScriptManager"></asp:ScriptManager>
<WebPartPages:DataFormWebPart runat="server" IsIncluded="True" AsyncRefresh="True" FrameType="None" NoDefaultStyle="TRUE" ViewFlag="8" Title="Table_A on Mini" PageType="PAGE_NORMALVIEW" __markuptype="vsattributemarkup" __WebPartId="{B70A05BB-A849-423D-8E53-C7AD9CCC18AD}" id="g_b70a05bb_a849_423d_8e53_c7ad9ccc18ad" pagesize="10">
<DataSources>
<asp:SqlDataSource id="Table_A_x0020_on_x0020_Mini2" runat="server" __designer:commandsync="true" ProviderName="System.Data.SqlClient" ConnectionString="Data Source=TestMSSQL;User ID=SQLADMIN;Password=079130;Initial Catalog=Mini;" SelectCommand="SELECT * FROM [Table_A] ORDER BY [ID] ASC "/>
</DataSources>
<ParameterBindings>
<ParameterBinding Name="dvt_apos" Location="Postback;Connection"/>
<ParameterBinding Name="ManualRefresh" Location="WPProperty[ManualRefresh]"/>
<ParameterBinding Name="UserID" Location="CAMLVariable" DefaultValue="CurrentUserName"/>
<ParameterBinding Name="Today" Location="CAMLVariable" DefaultValue="CurrentDate"/>
<ParameterBinding Name="dvt_firstrow" Location="Postback;Connection"/>
<ParameterBinding Name="dvt_nextpagedata" Location="Postback;Connection"/>
<ParameterBinding Name="dvt_curselkey" Location="Postback;Connection" DefaultValue="##init##"/>
</ParameterBindings>
<datafields>@ID,ID;@ForeName,ForeName;</datafields>
<XSL>
<xsl:stylesheet xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata" version="1.0" exclude-result-prefixes="xsl msxsl ddwrt" xmlns:ddwrt="http://schemas.microsoft.com/WebParts/v2/DataView/runtime" xmlns:asp="http://schemas.microsoft.com/ASPNET/20" xmlns:__designer="http://schemas.microsoft.com/WebParts/v2/DataView/designer" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:msxsl="urn:schemas-microsoft-com:xslt" xmlns:SharePoint="Microsoft.SharePoint.WebControls" xmlns:ddwrt2="urn:frontpage:internal">
<xsl:output method="html" indent="no"/>
<xsl:decimal-format NaN=""/>
<xsl:param name="dvt_curselkey">##init##</xsl:param>
<xsl:param name="dvt_apos">'</xsl:param>
<xsl:param name="ManualRefresh"></xsl:param>
<xsl:param name="dvt_firstrow">1</xsl:param>
<xsl:param name="dvt_nextpagedata" />
<xsl:variable name="dvt_1_automode">0</xsl:variable>
<xsl:template match="/" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata" xmlns:asp="http://schemas.microsoft.com/ASPNET/20" xmlns:__designer="http://schemas.microsoft.com/WebParts/v2/DataView/designer" xmlns:SharePoint="Microsoft.SharePoint.WebControls">
<xsl:choose>
<xsl:when test="($ManualRefresh = 'True')">
<table width="100%" border="0" cellpadding="0" cellspacing="0">
<tr>
<td valign="top">
<xsl:call-template name="dvt_1"/>
</td>
<td width="1%" class="ms-vb" valign="top">
<img src="/_layouts/15/images/staticrefresh.gif" id="ManualRefresh" border="0" onclick="javascript: {ddwrt:GenFireServerEvent('__cancel')}" alt="Click here to refresh the dataview."/>
</td>
</tr>
</table>
</xsl:when>
<xsl:otherwise>
<xsl:call-template name="dvt_1"/>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
<xsl:template name="dvt_1">
<xsl:variable name="dvt_StyleName">Table</xsl:variable>
<xsl:variable name="Rows" select="/dsQueryResponse/NewDataSet/Row"/>
<xsl:variable name="dvt_RowCount" select="count($Rows)"/>
<xsl:variable name="RowLimit" select="10" />
<xsl:variable name="FirstRow" select="$dvt_firstrow" />
<xsl:variable name="LastRow">
<xsl:choose>
<xsl:when test="($FirstRow + $RowLimit - 1) > $dvt_RowCount"><xsl:value-of select="$dvt_RowCount" /></xsl:when>
<xsl:otherwise><xsl:value-of select="$FirstRow + $RowLimit - 1" /></xsl:otherwise>
</xsl:choose>
</xsl:variable>
<xsl:variable name="IsEmpty" select="$dvt_RowCount = 0" />
<xsl:variable name="dvt_IsEmpty" select="$dvt_RowCount = 0"/>
<xsl:choose>
<xsl:when test="$dvt_IsEmpty">
<xsl:call-template name="dvt_1.empty"/>
</xsl:when>
<xsl:otherwise>
<table border="0" width="100%" cellpadding="2" cellspacing="0">
<tr valign="top">
<xsl:if test="$dvt_1_automode = '1'" ddwrt:cf_ignore="1">
<th class="ms-vh" width="1%" nowrap="nowrap"></th>
</xsl:if>
<th class="ms-vh" nowrap="nowrap">ID</th><th class="ms-vh" nowrap="nowrap">ForeName</th></tr>
<xsl:call-template name="dvt_1.body">
<xsl:with-param name="Rows" select="$Rows[position() >= $FirstRow and position() <= $LastRow]"/>
<xsl:with-param name="FirstRow" select="1" />
<xsl:with-param name="LastRow" select="$dvt_RowCount" />
</xsl:call-template>
</table>
</xsl:otherwise>
</xsl:choose>
<xsl:call-template name="dvt_1.commandfooter">
<xsl:with-param name="FirstRow" select="$FirstRow" />
<xsl:with-param name="LastRow" select="$LastRow" />
<xsl:with-param name="RowLimit" select="$RowLimit" />
<xsl:with-param name="dvt_RowCount" select="$dvt_RowCount" />
<xsl:with-param name="RealLastRow" select="number(ddwrt:NameChanged('',-100))" />
</xsl:call-template>
</xsl:template>
<xsl:template name="dvt_1.body">
<xsl:param name="Rows"/>
<xsl:param name="FirstRow" />
<xsl:param name="LastRow" />
<xsl:for-each select="$Rows">
<xsl:variable name="CurrentRowKey">
<xsl:call-template name="dvt.gencurselkey">
<xsl:with-param name="RowPath" select="." />
</xsl:call-template>
</xsl:variable>
<xsl:variable name="dvt_KeepItemsTogether" select="false()" />
<xsl:variable name="dvt_HideGroupDetail" select="false()" />
<xsl:if test="(position() >= $FirstRow and position() <= $LastRow) or $dvt_KeepItemsTogether">
<xsl:if test="not($dvt_HideGroupDetail)" ddwrt:cf_ignore="1">
<xsl:call-template name="dvt_1.rowview" >
<xsl:with-param name="CurrentRowKey" select="$CurrentRowKey" />
</xsl:call-template>
</xsl:if>
</xsl:if>
</xsl:for-each>
</xsl:template>
<xsl:template name="dvt_1.rowview">
<xsl:param name="CurrentRowKey" />
<tr>
<xsl:if test="position() mod 2 = 1">
<xsl:attribute name="class">ms-alternating</xsl:attribute>
</xsl:if>
<xsl:if test="$dvt_1_automode = '1'" ddwrt:cf_ignore="1">
<td class="ms-vb" width="1%" nowrap="nowrap">
<span ddwrt:amkeyfield="" ddwrt:amkeyvalue="ddwrt:EscapeDelims(string(''))" ddwrt:ammode="view"></span>
</td>
</xsl:if>
<td class="ms-vb">
<a target="_self">
<xsl:attribute xmlns:xsl="http://www.w3.org/1999/XSL/Transform" name="href">
<xsl:variable name="cursel">dvt_curselkey={
<xsl:call-template name="dvt.gencurselkey">
<xsl:with-param name="RowPath" select="." />
</xsl:call-template>
}</xsl:variable>
<xsl:variable xmlns:xsl="http://www.w3.org/1999/XSL/Transform" name="fields">@ID=<xsl:value-of select="ddwrt:ConnEncode(string(@ID))" /></xsl:variable>
<xsl:text>javascript:</xsl:text>
<xsl:value-of select="ddwrt:GenFireConnection(concat('g_2abfc8f5_0eb3_4711_a5b0_7e7518f56881*',$fields),string($cursel))"></xsl:value-of>
</xsl:attribute>
<xsl:attribute name="style">
<xsl:if test="$CurrentRowKey = $dvt_curselkey">font-weight: bold;</xsl:if>
</xsl:attribute>
<xsl:value-of select="format-number(@ID, '#,##0.#;-#,##0.#')" />
</a></td><td class="ms-vb">
<xsl:value-of select="@ForeName" /></td></tr>
</xsl:template>
<xsl:template name="dvt_1.empty">
<xsl:variable name="dvt_ViewEmptyText">There are no items to show in this view.</xsl:variable>
<table border="0" width="100%">
<tr>
<td class="ms-vb">
<xsl:value-of select="$dvt_ViewEmptyText"/>
</td>
</tr>
</table>
</xsl:template>
<xsl:template name="dvt_1.commandfooter">
<xsl:param name="FirstRow" />
<xsl:param name="LastRow" />
<xsl:param name="RowLimit" />
<xsl:param name="dvt_RowCount" />
<xsl:param name="RealLastRow" />
<table cellspacing="0" cellpadding="4" border="0" width="100%">
<tr>
<xsl:if test="$FirstRow > 1 or $LastRow < $dvt_RowCount">
<xsl:call-template name="dvt_1.navigation">
<xsl:with-param name="FirstRow" select="$FirstRow" />
<xsl:with-param name="LastRow" select="$LastRow" />
<xsl:with-param name="RowLimit" select="$RowLimit" />
<xsl:with-param name="dvt_RowCount" select="$dvt_RowCount" />
<xsl:with-param name="RealLastRow" select="$RealLastRow" />
</xsl:call-template>
</xsl:if>
</tr>
</table>
</xsl:template>
<xsl:template name="dvt_1.navigation">
<xsl:param name="FirstRow" />
<xsl:param name="LastRow" />
<xsl:param name="RowLimit" />
<xsl:param name="dvt_RowCount" />
<xsl:param name="RealLastRow" />
<xsl:variable name="PrevRow">
<xsl:choose>
<xsl:when test="$FirstRow - $RowLimit < 1">1</xsl:when>
<xsl:otherwise>
<xsl:value-of select="$FirstRow - $RowLimit" />
</xsl:otherwise>
</xsl:choose>
</xsl:variable>
<xsl:variable name="LastRowValue">
<xsl:choose>
<xsl:when test="$LastRow > $RealLastRow">
<xsl:value-of select="$LastRow"></xsl:value-of>
</xsl:when>
<xsl:otherwise>
<xsl:value-of select="$RealLastRow"></xsl:value-of>
</xsl:otherwise>
</xsl:choose>
</xsl:variable>
<xsl:variable name="NextRow">
<xsl:value-of select="$LastRowValue + 1"></xsl:value-of>
</xsl:variable>
<td nowrap="nowrap" class="ms-paging" align="right">
<xsl:if test="$dvt_firstrow > 1" ddwrt:cf_ignore="1">
<a>
<xsl:attribute name="href">javascript: <xsl:value-of select="ddwrt:GenFireServerEvent('dvt_firstrow={1}')" />;</xsl:attribute>
Start</a>
<xsl:text disable-output-escaping="yes" ddwrt:nbsp-preserve="yes">&nbsp;</xsl:text>
<a>
<xsl:attribute name="href">javascript: <xsl:value-of select="ddwrt:GenFireServerEvent(concat('dvt_firstrow={',$PrevRow,'}'))" />;</xsl:attribute>
<img src="/_layouts/15/images/prev.gif" border="0" alt="Previous" />
</a>
<xsl:text disable-output-escaping="yes" ddwrt:nbsp-preserve="yes">&nbsp;</xsl:text>
</xsl:if>
<xsl:value-of select="$FirstRow" />
- <xsl:value-of select="$LastRowValue" />
<xsl:text disable-output-escaping="yes" ddwrt:nbsp-preserve="yes">&nbsp;</xsl:text>
<xsl:if test="$LastRowValue < $dvt_RowCount or string-length($dvt_nextpagedata)!=0" ddwrt:cf_ignore="1">
<a>
<xsl:attribute name="href">javascript: <xsl:value-of select="ddwrt:GenFireServerEvent(concat('dvt_firstrow={',$NextRow,'}'))" />;</xsl:attribute>
<img src="/_layouts/15/images/next.gif" border="0" alt="Next" />
</a>
</xsl:if>
</td>
</xsl:template>
<xsl:template name="dvt.gencurselkey">
<xsl:param name="RowPath" />
<xsl:choose>
<xsl:when test="$dvt_curselkey = '##init##' and position() = $dvt_firstrow">##init##</xsl:when>
<xsl:otherwise><xsl:value-of select="ddwrt:ConnEncode(string($RowPath/@ID))" /></xsl:otherwise>
</xsl:choose>
</xsl:template>
</xsl:stylesheet> </XSL>
</WebPartPages:DataFormWebPart>
</td></tr><tr><td>
<WebPartPages:DataFormWebPart runat="server" IsIncluded="True" AsyncRefresh="True" FrameType="None" NoDefaultStyle="TRUE" ViewFlag="8" Title="Table_B on Mini" PageType="PAGE_NORMALVIEW" __markuptype="vsattributemarkup" __WebPartId="{2ABFC8F5-0EB3-4711-A5B0-7E7518F56881}" id="g_2abfc8f5_0eb3_4711_a5b0_7e7518f56881" pagesize="10">
<DataSources>
<asp:SqlDataSource id="Table_B_x0020_on_x0020_Mini1" runat="server" __designer:commandsync="true" ProviderName="System.Data.SqlClient" ConnectionString="Data Source=TestMSSQL;User ID=SQLADMIN;Password=079130;Initial Catalog=Mini;" SelectCommand="SELECT * FROM [Table_B] ORDER BY [ID] ASC "/>
</DataSources>
<ParameterBindings>
<ParameterBinding Name="dvt_apos" Location="Postback;Connection"/>
<ParameterBinding Name="ManualRefresh" Location="WPProperty[ManualRefresh]"/>
<ParameterBinding Name="UserID" Location="CAMLVariable" DefaultValue="CurrentUserName"/>
<ParameterBinding Name="Today" Location="CAMLVariable" DefaultValue="CurrentDate"/>
<ParameterBinding Name="dvt_firstrow" Location="Postback;Connection"/>
<ParameterBinding Name="dvt_nextpagedata" Location="Postback;Connection"/>
</ParameterBindings>
<datafields>@ID,ID;@LastName,LastName;</datafields>
<XSL>
<xsl:stylesheet xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata" version="1.0" exclude-result-prefixes="xsl msxsl ddwrt" xmlns:ddwrt="http://schemas.microsoft.com/WebParts/v2/DataView/runtime" xmlns:asp="http://schemas.microsoft.com/ASPNET/20" xmlns:__designer="http://schemas.microsoft.com/WebParts/v2/DataView/designer" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:msxsl="urn:schemas-microsoft-com:xslt" xmlns:SharePoint="Microsoft.SharePoint.WebControls" xmlns:ddwrt2="urn:frontpage:internal">
<xsl:output method="html" indent="no"/>
<xsl:decimal-format NaN=""/>
<xsl:param name="dvt_apos">'</xsl:param>
<xsl:param name="ManualRefresh"></xsl:param>
<xsl:param name="dvt_firstrow">1</xsl:param>
<xsl:param name="dvt_nextpagedata" />
<xsl:variable name="dvt_1_automode">0</xsl:variable>
<xsl:template match="/" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata" xmlns:asp="http://schemas.microsoft.com/ASPNET/20" xmlns:__designer="http://schemas.microsoft.com/WebParts/v2/DataView/designer" xmlns:SharePoint="Microsoft.SharePoint.WebControls">
<xsl:choose>
<xsl:when test="($ManualRefresh = 'True')">
<table width="100%" border="0" cellpadding="0" cellspacing="0">
<tr>
<td valign="top">
<xsl:call-template name="dvt_1"/>
</td>
<td width="1%" class="ms-vb" valign="top">
<img src="/_layouts/15/images/staticrefresh.gif" id="ManualRefresh" border="0" onclick="javascript: {ddwrt:GenFireServerEvent('__cancel')}" alt="Click here to refresh the dataview."/>
</td>
</tr>
</table>
</xsl:when>
<xsl:otherwise>
<xsl:call-template name="dvt_1"/>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
<xsl:template name="dvt_1">
<xsl:variable name="dvt_StyleName">Table</xsl:variable>
<xsl:variable name="Rows" select="/dsQueryResponse/NewDataSet/Row"/>
<xsl:variable name="dvt_RowCount" select="count($Rows)"/>
<xsl:variable name="RowLimit" select="10" />
<xsl:variable name="FirstRow" select="$dvt_firstrow" />
<xsl:variable name="LastRow">
<xsl:choose>
<xsl:when test="($FirstRow + $RowLimit - 1) > $dvt_RowCount"><xsl:value-of select="$dvt_RowCount" /></xsl:when>
<xsl:otherwise><xsl:value-of select="$FirstRow + $RowLimit - 1" /></xsl:otherwise>
</xsl:choose>
</xsl:variable>
<xsl:variable name="IsEmpty" select="$dvt_RowCount = 0" />
<xsl:variable name="dvt_IsEmpty" select="$dvt_RowCount = 0"/>
<xsl:choose>
<xsl:when test="$dvt_IsEmpty">
<xsl:call-template name="dvt_1.empty"/>
</xsl:when>
<xsl:otherwise>
<table border="0" width="100%" cellpadding="2" cellspacing="0">
<tr valign="top">
<xsl:if test="$dvt_1_automode = '1'" ddwrt:cf_ignore="1">
<th class="ms-vh" width="1%" nowrap="nowrap"></th>
</xsl:if>
<th class="ms-vh" nowrap="nowrap">ID</th><th class="ms-vh" nowrap="nowrap">LastName</th></tr>
<xsl:call-template name="dvt_1.body">
<xsl:with-param name="Rows" select="$Rows[position() >= $FirstRow and position() <= $LastRow]"/>
<xsl:with-param name="FirstRow" select="1" />
<xsl:with-param name="LastRow" select="$dvt_RowCount" />
</xsl:call-template>
</table>
</xsl:otherwise>
</xsl:choose>
<xsl:call-template name="dvt_1.commandfooter">
<xsl:with-param name="FirstRow" select="$FirstRow" />
<xsl:with-param name="LastRow" select="$LastRow" />
<xsl:with-param name="RowLimit" select="$RowLimit" />
<xsl:with-param name="dvt_RowCount" select="$dvt_RowCount" />
<xsl:with-param name="RealLastRow" select="number(ddwrt:NameChanged('',-100))" />
</xsl:call-template>
</xsl:template>
<xsl:template name="dvt_1.body">
<xsl:param name="Rows"/>
<xsl:param name="FirstRow" />
<xsl:param name="LastRow" />
<xsl:for-each select="$Rows">
<xsl:variable name="dvt_KeepItemsTogether" select="false()" />
<xsl:variable name="dvt_HideGroupDetail" select="false()" />
<xsl:if test="(position() >= $FirstRow and position() <= $LastRow) or $dvt_KeepItemsTogether">
<xsl:if test="not($dvt_HideGroupDetail)" ddwrt:cf_ignore="1">
<xsl:call-template name="dvt_1.rowview" />
</xsl:if>
</xsl:if>
</xsl:for-each>
</xsl:template>
<xsl:template name="dvt_1.rowview">
<tr>
<xsl:if test="position() mod 2 = 1">
<xsl:attribute name="class">ms-alternating</xsl:attribute>
</xsl:if>
<xsl:if test="$dvt_1_automode = '1'" ddwrt:cf_ignore="1">
<td class="ms-vb" width="1%" nowrap="nowrap">
<span ddwrt:amkeyfield="" ddwrt:amkeyvalue="ddwrt:EscapeDelims(string(''))" ddwrt:ammode="view"></span>
</td>
</xsl:if>
<td class="ms-vb">
<xsl:value-of select="format-number(@ID, '#,##0.#;-#,##0.#')"/>
</td><td class="ms-vb">
<xsl:value-of select="@LastName" /></td></tr>
</xsl:template>
<xsl:template name="dvt_1.empty">
<xsl:variable name="dvt_ViewEmptyText">There are no items to show in this view.</xsl:variable>
<table border="0" width="100%">
<tr>
<td class="ms-vb">
<xsl:value-of select="$dvt_ViewEmptyText"/>
</td>
</tr>
</table>
</xsl:template>
<xsl:template name="dvt_1.commandfooter">
<xsl:param name="FirstRow" />
<xsl:param name="LastRow" />
<xsl:param name="RowLimit" />
<xsl:param name="dvt_RowCount" />
<xsl:param name="RealLastRow" />
<table cellspacing="0" cellpadding="4" border="0" width="100%">
<tr>
<xsl:if test="$FirstRow > 1 or $LastRow < $dvt_RowCount">
<xsl:call-template name="dvt_1.navigation">
<xsl:with-param name="FirstRow" select="$FirstRow" />
<xsl:with-param name="LastRow" select="$LastRow" />
<xsl:with-param name="RowLimit" select="$RowLimit" />
<xsl:with-param name="dvt_RowCount" select="$dvt_RowCount" />
<xsl:with-param name="RealLastRow" select="$RealLastRow" />
</xsl:call-template>
</xsl:if>
</tr>
</table>
</xsl:template>
<xsl:template name="dvt_1.navigation">
<xsl:param name="FirstRow" />
<xsl:param name="LastRow" />
<xsl:param name="RowLimit" />
<xsl:param name="dvt_RowCount" />
<xsl:param name="RealLastRow" />
<xsl:variable name="PrevRow">
<xsl:choose>
<xsl:when test="$FirstRow - $RowLimit < 1">1</xsl:when>
<xsl:otherwise>
<xsl:value-of select="$FirstRow - $RowLimit" />
</xsl:otherwise>
</xsl:choose>
</xsl:variable>
<xsl:variable name="LastRowValue">
<xsl:choose>
<xsl:when test="$LastRow > $RealLastRow">
<xsl:value-of select="$LastRow"></xsl:value-of>
</xsl:when>
<xsl:otherwise>
<xsl:value-of select="$RealLastRow"></xsl:value-of>
</xsl:otherwise>
</xsl:choose>
</xsl:variable>
<xsl:variable name="NextRow">
<xsl:value-of select="$LastRowValue + 1"></xsl:value-of>
</xsl:variable>
<td nowrap="nowrap" class="ms-paging" align="right">
<xsl:if test="$dvt_firstrow > 1" ddwrt:cf_ignore="1">
<a>
<xsl:attribute name="href">javascript: <xsl:value-of select="ddwrt:GenFireServerEvent('dvt_firstrow={1}')" />;</xsl:attribute>
Start</a>
<xsl:text disable-output-escaping="yes" ddwrt:nbsp-preserve="yes">&nbsp;</xsl:text>
<a>
<xsl:attribute name="href">javascript: <xsl:value-of select="ddwrt:GenFireServerEvent(concat('dvt_firstrow={',$PrevRow,'}'))" />;</xsl:attribute>
<img src="/_layouts/15/images/prev.gif" border="0" alt="Previous" />
</a>
<xsl:text disable-output-escaping="yes" ddwrt:nbsp-preserve="yes">&nbsp;</xsl:text>
</xsl:if>
<xsl:value-of select="$FirstRow" />
- <xsl:value-of select="$LastRowValue" />
<xsl:text disable-output-escaping="yes" ddwrt:nbsp-preserve="yes">&nbsp;</xsl:text>
<xsl:if test="$LastRowValue < $dvt_RowCount or string-length($dvt_nextpagedata)!=0" ddwrt:cf_ignore="1">
<a>
<xsl:attribute name="href">javascript: <xsl:value-of select="ddwrt:GenFireServerEvent(concat('dvt_firstrow={',$NextRow,'}'))" />;</xsl:attribute>
<img src="/_layouts/15/images/next.gif" border="0" alt="Next" />
</a>
</xsl:if>
</td>
</xsl:template>
</xsl:stylesheet> </XSL>
</WebPartPages:DataFormWebPart>
</td></tr></table>
</form>
</body>
</html>

Hey Bale
Yes I use sharepoint designer 2013, when I do the same in sharepoint designer 2010, it do well
No to your question 2, 3 and 4
See again my picture below her, when I open the internet browser
in the database you have a table with forename and another table with last name,
the link between this two table is the id, when I open it is ok, Bens lastname is
James, Ben James.
So when I try to click on the blue id number 2 beside John, Johns Last name
should show up, but it did not, the link is dead. that's my problem the funny about this when I
do the same procedure see above in sharepoint designer 2010, it do well ?
Here is my first steps, when you have uploaded the first datasource, you need to save, place your courser
behind the <asp:ScriptManager runat="server" id="ScriptManager"></asp:ScriptManager> x PLACE COURSER HER
THEN you can upload the next datasource, the sharepoint designer automatic generate the code for the grid.
When you have the two grids inside the aspx file, place your courser behind the first
<WebPartPages:DataFormWebPart X <---
then the tab "option" show up and inside here you can add the connections between the two grids.

RFC connection between two SAP systems (with SAP router)

Hi!
I would like to set up a RFC-connection from SAP Solution Manager to other SAP system.
The network connection between the servers is VPN.
How can I set up this RFC-connection, if my connection between two SAP systems looks as follows,
(I use the following SAP routers)?
my server --> customer
my server --> internal SAP Router server xy (10.101....) --> SAP Router customer 2 (10.1....) --> SAP System customer (134....)
Back-way
SAP Systeme customer --> SAP Router customer (134.1....) --> internal SAP router (212.6....) --> my server
How can I set up this RFC-connection, if my connection between two SAP systems looks as follows,
(I use the following SAP routers)?
something like:
/H/10.101..../S/sapdp99/H/10.1.4..../S/sapdp99/H/134...
Thank you very much!
regards
Thom

Same answer as in the other forum where you cross posted....

Gprs connection between two mobile phones

Hi
is it possible to make a gprs connection between two mobile phones without a server(pc...)? when the answer "yes" please give me an exapmle...

I'm not sure, I'm just connecting some facts. I'm talking about Siemens S55. It has implemented sockets (both client sockets and server sockets). The phone, when connected via GPRS has IP address (Siemens' netmonitor reports it..). But i've never tried to use server-socket on my mobile.
So it seems that it is in fact possible on some handsets. (AFAIK nokia 6610 and similar does not support sockets...)

Connection between two Macs fails

My home-network consists of a MacPro (1,1 - 2006), a MacBook Pro (Early 2008) an a MacMini (late 2009), all running OS X 10.6.3, no software-firewall is running. My router is a LinkSys WRT 610 N which I use with ethernet (Mac Pro) and wireless (Book an Mini). Wireless is both, 2,4- and 5,0 Ghz (802.11n).
When I try to connect from the MacPro to the MacBook Pro via wireless, sometimes it works, sometimes it doesn't. The reverse connection works (Book to Pro). Sharing is enabled on every Mac, also screen sharing. If I connect the MacBook Pro via ethernetcable, it works. What could this be? Also I often cannot connect via the symbol in the sidebar of the finder, I have to use the "go to" - menu. If I want to make screen sharing I have to use "go to > vnc ...". Does anybody know these issues and can give me a hint? By the way, the connection between the two "younger" Macs (mini and book) works fine ...
Message was edited by: Stefan Gregor

Stefan Gregor wrote:
What could this be?
_*wireless interference*_ ?
download iStumbler (free) and note the channels other networks in your vicinity are broadcasting on. change the channel(s) of your network as far away as possible from those.
any improvement ?
JGG

Connection between two views

Hi Experts,
Please give me some inputs related to connection between two views ???

Hi
http://help.sap.com/saphelp_46c/helpdata/de/39/7dfeaaac6011d189c60000e829fbbd/frameset.htm
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2cceb190-0201-0010-be88-acdbeb2ad65f
How to acces context of view B from view A without using the controller?
http://help.sap.com/saphelp_nw04s/helpdata/en/7b/67eaa71bdf2645be6e811eee980a04/frameset.htm

Connection between two clients

Hi,
I want to get some guidance on connection between two clients. Suppose I need to connect client 500 with client 900 in the same system without changing the logical names.
Thanks & Regards
Nabarun

Nabarun -
It almost sounds as if you just want an RFC to go from one client to the other. RFCs (SM59) are not client dependant so you can create one in any client. You can create one with the system name and point it to the client number using a specific user and password. I would recommend for security it be a communications user and not a dialog user depending on what you will be sending between the clients. However, the user will need the correct permissions and again, depending on what you are trying to accomplish, it may have to be a DIAG user although I would be wary. Then create a 2nd RFC pointing back to the other client. For example...
RFC 1
System Name = <System>
Client = 500
User = <userid in clnt 500>
RFC 2
System Name = <System>
Client = 900
User = <userid in clnt 900>
Then when you are in client 500, there is a path/connection to client 900 via that clients ID and password and vice versa using the appropriate RFC. Again, with out more info on what you are attempting, this may be your solution. Hope this helps. Good luck
Regards,
Zecher

SNC connection between two SAProuter

Hi Guys,
Please give me the procedure to establish the SNC connectivity between two SAProuter.
Thanks and Regards,
Atul

Hi Atul,
have tried the SDN Search Function with "snc AND saprouter"? It gave me this Links:
SNC User Guide:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/snc user guide.pdf
Configure Secure Network Communication SNC:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/configure secure network communication snc.pdf
Regards
Gregor

How to Break the cluster between Two servers

Hi Experts,
Since Iu2019m new to BOBJ XI R2.I would like to know how to break the cluster between two servers.
Description :
So far we took the copy of QAS Server1 to the new QAS server2 (Through Mirroring Tool ). Now those two servers are cluster together, I can see QAS server1 CMS Name, Cluster Name, cluster member name in QAS Server2 (CMC-> Setting -> Cluster).
Besides in QAS Server1 CMS Name and Cluster name are pointing to the QAS Server1, except Cluster Member (This is still have two members Server1 and Server2).(CMC-> Setting -> Cluster).
In QAS Server1 and QAS Server2 (CMS-> Servers), I can able see both server name under Machine Name tab.
I would like to make those two servers as independent servers. There are two different data source for those two servers. I want to remove the cluster in both servers.
Right now QAS Server1 is running and QAS Server2 is stopped.
If i create/modify a group under new Mapped NT Member Groups in QAS server2 ,it is getting reflecting in QAS server 1.
Could you please tell me the steps to resolve this problem.
BO Version: BO XI R2
Regards,
Sridharan

Hi,
Maybe the external CMS is still 'attached' to your SIA node. Please go to the CCM (Central Configuration Manager) and stop the SIA (Server Intelligent Agent). On one of the tabs you can see if there is an external CMS part of your environment. Delete it and restart the SIA. Retry if you can delete the services now from within your CMS. It may well be that you have to stop both environments and delete each others CMS via the CCM to get it working. If you have not changed any permissions for your Administrator account the security model will not be the one causing this.
Hope this helps...
Martijn van Foeken
Focuzz BI Services
http://www.focuzz.nl
http://nl.linkedin.com/in/martijnvanfoeken

How to configure connectivity between two vm linux hosts

Hello All,
i have installed vm workstation with two RHEL4 linux installation.
Node 1:RHEL4
Node 2:RHEL4
i have configured 2 ethernet cards am able to ping in a host but not each other.
i have tried to ping from Node 1 to Node 2 am getting icmp_seq=0 Destination Host Unreachable .....
kindly suggest how to configure connectivity between two host permanently.please explain with example if possible. or suggest any link.
thanks,
Mike.

1003614 wrote:
thanks for quick reply ....Oracle vm workstation 4.2 am using.
... then your post is now moved to the appropriate forum space for your question (Oracle VM for x86).

In BADi , How to pass the values between two Method

Hi Experts,
We have two methods in BADis. How to pass the value between two Methods. Can you guys explain me out with one example...
Thanks & Regards,
Sivakumar S

Hi Sivakumar!
Create a function group.
Define global data (there is a similiar menu point to jump to the top include).
Create one or two function modules, with which you can read and write the global data.
In your BADI methods you can access the global data with help of your function modules. It will stay in memory through the whole transaction.
Regards,
Christian

The connection between two Tuxedo machines

Similar Messages

Maybe you are looking for