The connection of AQ adapter is inactive when restart the server.

I'm facing an issue in our project.
I create an aq adapter to read the aq (the aq is created iin a MIS database server), and deploy it to SOA server(Oracle SOA Suite, 10.1.3.3). I'm finding that a connection to MIS database from AQ Adapter is created and kept to be running periodary.
If, if, the MIS database server is re-start. The issue occurs. The adapter can't read aq any more unless restart the SOA server .
My colleague tells me that he is facing the same issue in creating a dbadapter to polling data from table.
Is there a solution that we needn't to restart the SOA server? Because in production, it will impact many business application to restart the SOA server.
Thanks.
Joseph

It's resolved.
If SOA server is launched when MIS database is down, the adapter connected with MIS database will be marked as inactive. So after MIS database re-start, the adapters doesn't work yet. To enable the adapters, do the following steps:
1. login ESB console
2. select the adapter wich is connected with MIS database
3. Disable it and Enable again.
It's OK now.

Similar Messages

Text across the top of my website is inactive when i publish

the text that is across the top of my website is inactive when i publish. but in iweb it works just fine. Does anyone know how i can fix this issue?
thanks so much!
Denasimoneaux

let me give that a shot and see if that helps.... it is an old graphic i need to remove anyway...thanks!
Denasimoneaux

The connection to complaints.donotcall.gov was interrupted while the page was loading." All other pages load okay. Everything loads perfectly on I/E 8

When logging on to the "do not call website" to file a complaint I get the following message "The connection to complaints.donotcall.gov was interrupted while the page was loading." All other pages load okay. Everything loads perfectly on I/E 8.
I have started Firefox in the safe mode and got the same results.
Turned off firewall and virus programs, no help. I have 2 new computers about 2 years old both have the same problem with ver. 12.0

Try to rename the cert8.db file in the Firefox profile folder to cert8.db.old or delete the cert8.db file to remove intermediate certificates that Firefox has stored.
If that helped to solve the problem then you can remove the renamed cert8.db.old file.<br />
Otherwise you can rename (or copy) the cert8.db.old file to cert8.db to restore the previous intermediate certificates.<br />
Firefox will automatically store intermediate certificates when you visit websites that send such a certificate.

I am using Adobe XI Pro and in various parts of the document there is brown / biege lettering when on the document it shows as black. My printer guy has been in and checked it out top to bottom and that part is fine. I have tried to print the same docum

I am using Adobe XI Pro and in various parts of the document there is brown / biege lettering when on the document it shows as black. My printer guy has been in and checked it out top to bottom and that part is fine. I have tried to print the same document and it comes out fine. Any ideas ? Using Windows 7 Service Pack 1

Sorry my bad. I have tried to print the same document on another printer and all the formatting is fine.

I seem to not enter the correct answers to my security questions for itunes to buy an in-app purchase and also cannot answer the questions exactly like i answered them when creating the account for my ipod, how do i find out what answers i put

I seem to not enter the correct answers to my security questions for itunes to buy an in-app purchase and also cannot answer the questions exactly like i answered them when creating the account for my ipod, how do i find out what answers i put for my ipod touch and itunes?

Try these previous discusssions:
recover answers to security questions: Apple Support Communities
how do i change apple ID security...: Apple Support Communities

HT204368 I recently upgraded from an iPhone 4s to an iPhone 5. I have a Motorola HX550 Bluetooth Headset which worked flawlessly with the iPhone 4s. However, since upgrading to the iPhone 5, I frequently lose audio when in the middle of a call. I am no

I recently upgraded from an iPhone 4s to an iPhone 5. I have a Motorola HX550 Bluetooth Headset which worked flawlessly with the iPhone 4s. However, since upgrading to the iPhone 5, I frequently lose audio when in the middle of a call. I am not certain whether it is a full disconnect or just an audio loss. The person on the other end reports still being able to hear me, however, I suppose they could hear me speaking over another source even if bluetooth disconnected. The loss of audio is always preceded by a quick shrill noise, so I can easily tell when it happens. All I have to do to fix the problem is to select Audio Source on the call screen, temporarily switch audio back to the iPhone, and then switch back to the headset, and then it starts working again.
Is is important to note that I am not the only one experiencing this issue:
This is a link to someone using the Motorola H19txt headset experiencing the same issue
https://forums.motorola.com/posts/94ac15ad7c
If you go to the Plantronics website and look at the "Ratings and Reviews" on the Voyager Legend you will see the same issue reported:
http://www.plantronics.com/us/product/voyager-legend (next paragraph is taken from the review since there is no direct link to the review.
Really nice Headset unless you own an Iphone 5. I own several Plantronics headsets and have always loved the quality/ performance. This headset seems not to be compatible with the new Iphone 5. In the middle of a conversation it will lose all incoming audio. This leaves you trying to switch audio sources really fast in order not to lose your phone call. Ive tried 3 legend headsets and they all do the same thing. Hopefully this gets fixed soon because the headset is really nice
Since this issue appears to affect multiple headsets from multiple vendors, I think it is fair to conclude that it is an issue with the iPhone5 bluetooth itself.
I am posting this as a new discussion as I don't see any other posts specific to this iPhone 5 Bluetooth issue. I would have reported this as a problem to Apple, but don't seem to be able to find a way to do this on the web. Hopefully they are already aware, but if not, maybe they will see i here.

here is an interesting thing: take the iphone and set lock screen to never. Now make an email with siri--be sure to activate her with call button. get to the body and get some text in there. then just stop talking. LOCK SCREEN APPEARS!!!!!! and of course you draft is gone.
There does seem to be a work around for some--maybe all these issues. Don't use the call button--use the buttons on the phone.
Siri seems to behave properly with scenerio above---sans call button. She does not go to lock.

How do I disable the sound effect on my MacBook Air when adjusting the volume

how do I disable the sound effect on my MacBook Air when adjusting the volume

Thanks Ralph, that fixed it, I did uncheck that box earlier however I had not restarted the computer. Thanks again.

How to disconnect internet connection in Time Capsule and reconnect without restarting the whole device?

Hi, I would be very grateful if someone could tell me how to disconnect internet connection in Time Capsule and reconnect without restarting the whole device?
The thing is that as I have a dynamic IP address, everytime I restart the internet connection my IP address changes. I sometimes need it to change, so I need to restart the connection. I don't know another way to restart the connection than restarting the whole Time Capsule.
Thanks!!
PD: the computer I use is Windows based, using the Airport Utility for Windows, but I also have a MacBook Pro I could use and an iPhone too.

The utility in windows is very like Mac so the screenshots are from Mac as I don't have windows available now.
How this works depends on the setup of the TC.. which you did not tell us.. you cannot change anything if you do not have the TC as the main router in the network.
So on the internet tab you need to share a public IP address.
On the next tab where you set IP address.
Click the renew IP address.
It might work.. and it might not.. the problem is you are not disconnecting the network.. sometimes the hard disconnection is required before the address will renew..
What about unplugging the WAN port.. then click renew the IP which will fail.. then plug the wan back in again.
In the end it is easier and faster to power cycle the TC.

HT201263 my iphone is stuck in the connecting to itunes screen, i can not restart my phone the top power button is broke? any ideas? it wont let me connect to itunes either, usb device can not be detected

my iphone is stuck in the connecting to itunes screen, i can not restart my phone the top power button is broke? any ideas? it wont let me connect to itunes either, usb device can not be detected

Hello Alex_boi941,
Thanks for using Apple Support Communities.
I'm sorry to hear that your iPhone's power button is not functioning correctly. To be able to get full functionality of your phone, it would need to be repaired.
Apple - Support - Service Answer Center
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
Take care,
Alex H.

Can the Flash Player do frame accurate seeking when using the HDS protocol?

Hi all,
... and thanks in advance for taking the time to respond. I've been playing with different media serving protocols, and I have a couple of questions.
1. Can the Flash Player do frame accurate seeking when media is served via the HDS protocol? (I know it works using RTMP)
2. If it does work, is it impacted in any way if I also use Access DRM-Core or Access DRM-Professional? (I want stronger DRM protection than simple Access Protected Streaming)
Thanks!

Hello Simona_83. Try downloading Google Chrome (it's free). Install Flash Player via Chrome, and use Chrome as your browser. This is the only thing that worked for me after over a month of trying everything under the sun to get Flash Player working again. You'll have to use Chrome as your browser in order to have Flash Player capability, but so what. It works. If it works for you as it works for me, you will have Youtube again; you just have to access Youtube via Chrome. Don't waste hours of your life trying to get Flash Player to work any other way. Believe me, I wasted hours upon hours off and on over the course of a month trying to get Flash Player installed and operating.

I just updated my phone to the latest version.... but when restarting it asked for a passcode. I haven't had a passcode in at least six months and don't remember what my old one was. What can I do to access my phone?

I just updated my phone to the latest version.... but when restarting it asked for a passcode. I haven't had a passcode in at least six months and don't remember what my old one was. What can I do to access my phone?

Never mind was thinking a different brand
You used a backup on iTunes?

Is there a way to filter a drop down list by using the result main data display from"GetUserProfileByName" when open the form.

Hi
Is there a way to filter a drop down list by using the result main data display from"GetUserProfileByName" when open the form?
The second source has a huge list of company names that can be narrrow by email work.
background:SP 2010 and Infopath 2010
CRISTINA&amp MICROSOFT Forum

I'm not sure if I understood your question clearly but here is a good resource on how to get attributes from "GetUserProfileByName" web services:
http://blog.mangroveweb.com/pre-populating-an-infopath-from-with-mysql-data-using-a-net-web-service/using-sharepoints-getuserprofilebyname-web-service-to-retrieve-ad-account-information/
Regarding filtering dropdown list then this could be done by applying form on-load rules.
Hope this helps

TS1398 hi, my iphone is not connecting to wifi. there is no problem with the connection of wifi. i tried so much but the connection is not stable. some times it connect and sometimes not connecting at all. if connected also its disconnecting again.pls hel

hi, my iphone is not connecting to wifi. there is no problem with the connection of wifi. i tried so much but the connection is not stable. some times it connect and sometimes not connecting at all. if connected also its disconnecting again.pls help

At the very least, I recommend you restart your router, (your internet box).
More detail on your problem is needed - are you in a submarine? On the moon? On a tropical island?
You can help yourself by providing as much info as you can about your present situation - what kind of router do you have? Have you moved it? DId you update it? Did you do anything to change your setup, and if you did, what?

We bought a new prepaid phone on 10/5/14 at a Verizon store had an existing phone number transfered and the phone can not be activate. When will the system be updated? We have lost 2 days of service.

We bought a new prepaid phone on 10/5/14 at a Verizon store. Had an existing phone number transfered and the phone can not be activatde. When will the system be updated? We have lost 2 days of service and now cannot use the original phone due to moving service to Verizon.

The exact same thing has happened to me! The customer service reps keep saying there is nothing they can do until their system upgrades are complete and they can't tell me when that will be! I need my phone number back!!! Somebody please help with this issue!

HT4428 My 128 Gb iPad cannot do airplay mirroring with Apple TV 3. It only airplays with screen off (like iPad 1), and it can only do airplay with apps which have the airplay button. No airplay button when sliding the bottom opened apps to the right.

My 128 Gb iPad cannot do airplay mirroring with Apple TV 3. It only airplays with screen off (like iPad 1), and it can only do airplay with apps which have the airplay button. No airplay button when sliding the bottom opened apps to the right! Note : This problem persists after HDMI cable has been changed, and Apple TV was reset. My another iPad 4 64Gb also on the same most updated ISO has no problem.

I restarted the iPad, it is okay now! I think it is because I have been using the smart cover for too long, without shutting down the iPad completely! It just works fine with the airplay signal appearing again after restarting the iPad.

The connection of AQ adapter is inactive when restart the server.

Similar Messages

Maybe you are looking for