The connection to our airport express says it has time out and lost connection?
the connecton to airport express say it has timed out and lost connection. can not hear music from airport express speakers. only the computer
What is your overall network configuration with the AirPort Express? That is, is the Express configured to join a wireless network provided by another router or is it your main router? If it is joining another router, what is the make & model of this router? Which model of the Express do you have? Finally, if you have another router, where is the Express located related to this router? Same room, different room, different floor?
Similar Messages
-
I have an Ipad and Iphone but I don't have an Airprint at home but only a WIFI printer, my question is if I connect the wifi printer to Airport express, can I print from Ipad and Iphone ? Please help me if anyone knows about this.
Unfortunately, connecting a non-AirPrint-enabled printer to an AirPort base station's USB port will not make it AirPrint-ready.
You will need to use another solution, like Printopia, to be able to print to this printer from an iOS device. -
I have the iPhone 5s and cannot connect to iTunes. It always says 'iPhone device timed out' and never connects. How do I fix it?
Hi Kaitlynlh,
Thanks for using Apple Support Communities. If your device is timing out, I would try restarting the iPhone and attempting to connect again. If the issue still persists, try resetting as well. You can find instructions here:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
Cheers,
- Ari -
some times my internet connection will say it has timed out and I can not connect. but my friends mac never has a problem. How can I fix this?
Just confirming, when you have the trouble, the wifi icon is grayed-out or has all bars showing? I believe you are saying that is is grayed-out - not connected to your wireless router.
I have a Mini that started to lose connection to the Internet after the 10.7.3 update but still showed the wireless as connected. If I pinged the wireless router, I would get a quarter of the packets failing to return. The router was a Netgear that supported 802.11N connections. As a test, I set it to 802.11G (54MBps) maximum and the Mini worked fine for a week - no dropouts. And for the other devices that did support 802.11N, while there was a noticeable delay with downloads and pages loading, they still worked.
As another test, I changed the Netgear router to a Billion 802.11N model and the Mini has not had a problems since. (It is still using 802.11g). So it could be your router that is causing trouble for your Mac.
Have a look at some of the More Like This postings in the right column. There has been a number of Mac owners experiencing wifi connection issues and some very good suggestions as to how to resolve their issue. -
Why cannot I connect my Ipad again to Wifi and why has all my emails and contacts been deleted?
Why can I not download ios5 and my computer says it has run out of time?Some problems occurs when your Internet security program was set
to trust the previous version of Firefox, but no longer recognizes your
updated version as trusted. Now how to fix the problem: To allow
Firefox to connect to the Internet again;
* Make sure your Internet security software is up-to-date (i.e. you are running the latest version)
* Remove Firefox from your program's list of trusted or recognized programs, then add it back. For detailed instructions, see
'''[https://support.mozilla.org/en-US/kb/configure-firewalls-so-firefox-can-access-internet Configure firewalls so that Firefox can access the Internet.]''' {web link} -
i had to restore my iPad mini and when I go to the App Store to reload some of my apps it times out and doesnt reload them. Any suggestions?
Close the App Store app and reset your iPad.
Now close all apps. In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
In order to reset your iPad, hold down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple logo appears on the screen after which time you can release the buttons and let the iPad start up.
IF that didn't help, try turning WiFi off on your iPad in the Settings, restart the iPad, then turn Wifi on again. -
How can i connect my existing airport express to my new time capsule network?
I have an older airport express for wirelessly extending my network in my apartment. I bought a new Time Capsule and my airport express flashes amber and cannot find the time capsule to connect. How do I get them connected?
You can use the USB3 connections for USB2. That's downward compatible. Just runs at USB2 speed.
Just this week apple announced a couple of TB adapters, TB-to-ethernet and TB-to-firewire. But the FW adapter is not at the apple store as yet (at least at the time I am posting this). -
Would love some suggestions as to ho to get thi airport working again!
I too just got time warner. I now have a motorola surfboard sb 6141 attached to my airport extreme. I have had problems with the AE when I was on DSL. I had to unplug it on average every 2 days to reset it as I would loose my WIFI connection. I've updated it to the most recent firmware and I reset it to factory condition when I joined Time warner today.
The modem and router are in the kichen and if I'm on my laptop there the connection is almost alway great. But occasionally it becomes bad. In my office on the iMac the eventhough the signal strength is excellent the speed is either great or exceedingly slow. If I unplug the router and plug it back it, it becomes speedy again in the office. So I guess I need a new router, but this one is only a year old. Any suggestions? -
please help
Follow these steps to see if it resolves your issue: (from http://support.apple.com/kb/TS4148)
You may also want to contact your carrier for to make sure there isnt a issue with the carrier service.
Update your iPhone to the latest version of iOS.
Toggle Airplane mode On and Off.
Try turning iPhone off and then on again.
Check for a carrier settings update. Tap Settings > General > About. If an update is available, a prompt will appear.
Remove the SIM Card and verify that it is a valid, carrier-manufactured SIM. Also verify that it is not damaged, worn, or modified. Then reinsert it.
Restore the iPhone.
Hope this helps -
.
Hi Robertfrom Denver.
Did you try the solution given, and if yes, did it work?
I have done several "attempted downloads, and see the full file download, typically taking 30 minutes to complete, and then something goes wrong.
I am happy to suspend AV and FW software, but would like to know if it is a good fix or not first?
HelenfromBroughton Astley -
Says thunderbird has timed out...won't import any new messages
When I open Thunderbird, it will not import any new messages....just sits there and eventually say it has time out.
Troubleshooting steps:
1. Check if your Internet is working.
2. Reboot the computer. -
Why does my Airport Express say "self assigned IP address"? No IP address for the ethernet, and it is not connecting to my cable router any longer...
Some cable providers.....like mine, a well known company......seem to take anywhere from a few moments to sometimes up to 30 minutes to allow their equipment back at the cable company to fully reset and issue a new fresh connection.
So, it would not hurt to leave things powered down for 15-20 minutes or more when you perform the reset that John Galt suggests. -
I'm not entirely displeased with the situation but I cannot see how I could be connecting to the Internet through my airport express when the Airport is not connected to anything.
Weird huh?
I have a separate non- Airport wireless network connected to the Internet. I had previously set-up the Airport to link with this network but disconnected it (by resetting it) as music streaming was unlistenable due to frequent drop out. I now just have the Airport Express as a standalone wireless network only connecting to the stereo to stream music from devices.
My devices are only connected to the Airport network with cellular data off. Yet I can still connect to the Internet AND listen to streaming music (without drop-out no less).
I don't want to fix it but I would like to know how the frag it could happen so i don't screw it up accidentally.I would say you still have something of the previous setup.
To be sure you don't mess up, save the configuration.. go to the top menu area of the airport utility and export configuration.. which will land on your computer.
Now you can recover at anytime to the current setup.
How it works.. that is magical ..
Open the airport utility.. edit.. and take a screenshot and post it of the following pages..
Internet wireless network
THen we can tell you how it is working. -
When attempting to play iTunes 11.1.2 music wirelessly from my Mac Mini to stereo speakers connected to an AE "G" I get the following message: An error occurred while connecting to the AirPlay device “Stereo Airport Express G”. However, when I attempt to play internet radio from an iPod Touch wirelessly to the same speakers connected to the same AE "G", it works fine.
Finally, when I swap out the "G" for an AE "N" connected to the same speakers Airplay works fine, both from the Mini and the iPod.
Why would the iPod connection work while the Mini connection not?I have what sounds like a very similar issue.
I had my Denon 3312ci working perfectly with Airplay from my 2013 iMac running iTunes. Upgraded to iTunes 11.1.3, and now when I attempt to Airplay direct from iTunes to the 3312, it plays for about half a second and then stops. Displayed on the Amp then says "Assigning Network". The amp starts dropping ping packets at this point. About 15-20 seconds later the pings start coming back, but no Airplay.
I tried different network cables, resetting the microprocessor, a different switch, changing between DHCP and static IP. Was about to make a warranty call to Denon, when I thought maybe I should try Airplaying directly from iphone and ipad. Much to my surprise, it worked from those devices.
I prefer to use my iMac to Airplay rather than ipad/iphone as I found I got next to no audio drop outs using it that way (they are both using wired network), where as ipad/iphone occasionally would get a moment of silence in the middle of a song.
My network set up is fine. I can use internet radio and connect to DLNA services fine on the amp. It is just airplay between iTunes 11.1.3 and the amp where the issue lies.
No fixes as yet, but I have logged a support call with Denon Australia to see what they say. -
I can see my Canon MP600 usb connected to Airport Express through Bonjour on my Windows XP. But, when installed by Bonjour, the printor time-out and can't print anything. Any idea what to do?
Thanks for the quick reply.
So am I correct in saying trying to utilise the Airport Express to access the printer over the network was a wasted effort due to the latest iOS? I had read up on the express before purchase and believed that was one of it's main purposes.
Thanks again for the help.
Maybe you are looking for
-
FM to get table names for a given Apllication Component.
Hai Friends, I have to create a function module which functions exactly as the INFORMATION SYSTEM button in se16 table help. i have written something like this but this is not giving exact results as INFORMATION SYSTEM IN SE16. for ex. for componet
-
Backup 3: Define Home Folder ? wwwroot Included?
Does anyone know what exactly is getting backed up? I notice that Backup 3 lets me backup my home folder. Cool. Does that mean my entire home folder? Specifically I do web development and one of my main folders is the wwwroot folder of ColdFusion dev
-
How do you access things like volume in a java program
I want to access the volume on a computer with a java program. How does one do this?
-
HT4528 How do I get my videos off onto a DVD
I am trying to figure out how to get my videos onto a DVD. I did get them onto one but why can't I view these videos on my Playstation3?
-
Wait for Event FIPP - Completed Logically Deleted
Hi WF Experts, We have a WF for Release of payments. It has 1 Fork with 2 parallel branches (both necessary). 1 Branch has the approval process for Amount release and the other branch calling the Account assignment approval Subworkflow. The approval