The console starts when I run my mac
Hi! someone knows why evertimes I open my imac the console starts? I don't know if it's a leopard bug but I'm really disapointed with leopard... so much troubles...
Hi! someone knows why evertimes I open my imac the console starts? I don't know if it's a leopard bug but I'm really disapointed with leopard... so much troubles...
Do you mean once logged into your desktop the console application launches from the dock? or do you mean you dont get to the login screen your just presented with the unix login?
Similar Messages
-
i have erased my partition completely. now i am not getting the installation started when i quit the disk utilities..instead i get an option to restore my system. and i have no restore points on my system so eventually my mac dosent get installed
please help me outI can't do that since I do nothing with Windows.
It sounds like it was hacked to run XP and then makes it not run OS X now.
Only thing I can suggest is to repartition the hard drive to a single HFS+, GUID partition and see if that allows you to install OS X.
Allan -
Hi I replaced my hard drive on macbook and I want to install mac osx10.5 with the CD that came with the macbook. When I run the CD after a while I get the page showing language options for 2 second then a gray screen appears and nothing happens. I partitioned my hard drive and I tried installing Microsoft windows and that worked just fine. But I do not understand why it wont install mac os x 10.5????? PLEASE HELP ME. Thanks Hamid
Try a new post in the 10.5 Installation forum.
DALE -
I use a translation stage for the experiment.For each user in the lab the stage position (to start an experiment) is different.I defined one end of the stage as zero. I want to save the position , date and time of the stage with respect to zero.I want all these in one file, nd everytime I run it it should save to the same file, like this:
2/12/03 16:04 13567
2/13/03 10:15 35678
So I will track the position from day to day.If naybody helps, I appreciate it.Thanks.evolution wrote in message news:<[email protected]>...
> How can I save my data and the date,the time into the same file when
> I run this VI at different times?
>
> I use a translation stage for the experiment.For each user in the lab
> the stage position (to start an experiment) is different.I defined one
> end of the stage as zero. I want to save the position , date and time
> of the stage with respect to zero.I want all these in one file, nd
> everytime I run it it should save to the same file, like this:
> 2/12/03 16:04 13567
> 2/13/03 10:15 35678
>
> So I will track the position from day to day.If naybody helps, I
> appreciate it.Thanks.
Hi,
I know the function "write to spreadsheet file.vi"
can append the data
to file. You can use the "concatenate strings" to display the date,
time as well as data... Hope this help.
Regards,
celery -
I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
Thank you in advance.
Regards,
Attachments:
HP8563E_Query_Amplitude.vi 37 KBHi,
Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
So I want to acquire 1 time amplitude from spectrum analyser each 5
period of the signal that I am acquiring from parallel port.
So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
Here is a new algorithm.
1) i=0 (counter: number of period)
2) I read value from In Port
3) If I acquire a period
i= i+1 (another period)
4) If i is multiple of 5 (If I read 5 period)
acquire 1 time amplitude and write to the same
file this amplitude and the corresponding distance
Distance = 12*i). Remember each period of signal
Corresponds to 12 Inches).i has to take these
values: 5,10,15,20,25,35,40,45,50,55,60............
5) Back to 2 if not stop.
Thank you very much for helping me.
Regards,
Attachments:
Acquire_Amplitude_00.vi 59 KB
Figure_Algorithm.doc 26 KB -
I can't run all the apps.. when i run it, it crashed out immediately
i can't run all the apps.. when i run it, it crashed out immediately
Try:
- Resetting the iPOd. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Downloading/installing a new app
- Restorng from bavkup
- Restoring to factory defaults/new iPod. -
There is the error message when we run IR8A report
Hi SAP expert,
There is the error message when we run IR8A report via T-code PC00_M25_NCT8A, below is the error message
"Assignment to valuation model is missing for calculation process 25 SGLS
Message no. HRSEN00107
Diagnosis
There is no entry in the assignment table for valuation model and rounding rule (V_T525S) for the return value for feature SENOR on the key date 07.12.2007 for the selected calculation process 25 SGLS (country grouping, calculation process, process step).
At least one valuation model must be assigned to each calculation process in view V_T525S.
Procedure
Make an entry for this calculation process and return value for feature SENOR in view V_T525S (Assignment of Valuation Model and Rounding Rule).
I would appreciate you very much if you could advise me how to solve this problem.Hi ,
I am facing the same error like this,
please let how did you solve this iisue ?
thakn\s -
I am new at Captivate 8 and I have created a learning project using an existing power point presentation. I have added a button that will allow my students to view a video on the subject. When I run the project in Preview the button works but when I publish it, it stops working.
I added an Interactions button and in the Actions on Success I open an URL or file. I have placed the video on our web server. In the URL I point to our web server "http://www.wmabhs.org/Media/Add Client 3rd Party Coverage.mp4". If I run this from any browser it works. So what do you think I have done wrong?
-
I no longer have access to the school email when I purchased my mac a few years ago. I recently purchases new computer and want to deactivate photoshop on the old computer and reactivate it on the new computer.
if you have it installed on windows, you can use belarc advisor to recover your serial number.
-
I did the fix but it didn't fix the issue. It allows me to create the script but when it runs it will not add the user account.
Here is all the same setting aside from the user info being created.
https://www.dropbox.com/s/kkxmhls3bfs6ns3/Apple%20Support%20Installer%20Script.p kg -
A 1 pixel gap appears on webpage on the ipad or when zoomed on a Mac with Firefox 4
I'm having an issue with a website having a 1 pixel gap under various OS's and browsers.
http://www.coffeeandcream.ca/
When viewed on an iPad it shows a 1 pixel gap on the right side of the link icons. When you zoom on the iPad, the gap disappears and reappears at random zoom factors.
When viewed on my Mac Pro under Firefox (version 4) it is fine to start, but when zoomed, random images have the 1 pixel gap sometimes above and below or to the left or right or sometimes both above/below and left/right.
I'm not over worried about the behaviour of Firefox...since it is only when the page is zoomed.
When I view it on my Windows PC, I have no issue with the gap under Firefox 3 or 4, or IE.
Any thoughts on what is going on?
Thanks in advance,Have you thought of entering the following code at the very top of your CSS file?
margin: 0;
padding: 0;
border: 0;
This should reset the browser of your iPad and FF in Mac. I use neither so I can't test it at my end. the above code is not likely to affect any other standards compliant browsers.
hth -
E17 fails to start when not run as root
Greetings
I'm a relatively new user to Arch Linux, although I've been running it on my laptop for some time and enjoyed it. Long story short, these days I decided to put it as a main OS on my desktop machine. Everything was OK, the system booted fine and the X server was working lovely, until I decided to put in E17 (from the days of OpenGEU, that's still my favourite WM). The problem is, if I start it from the root acc, it starts without problems and works out-of-the-box. But when I start it with a normal account, it starts the X server and then dies (yeah, great, so close...).
The first thing that came to mind was file permissions, but anything I managed to find in the enlightenment folders was world readable. I tried starting it with the SLiM manager instead of startx (.xinitrc's on both accounts contain only "exec enlightenment_start"), copied the root's .e folder in the user' one, even tried "xinit /usr/bin/enlightenment" - nothing of these worked.
Log of the root starting session: http://pastebin.com/JK6gmyui
Log of the user starting session: http://pastebin.com/G3ru1aCR
When I read the logs, my first thought was the system was hanging because of the e_randr error, but it exists in the root logs too, so this couldn't be the problem. Apparently something's screwing up on e_ipc loading, but I've absolutely no clue why.
I'll be really, really grateful to anyone who has the patience to try and help me get to the bottom of this, since I don't like the perspective of making the root account my every day acc only because of E17.
Thanks in advance (:I'm not a guru (I was hoping one would have stepped in by now!) so I can't suggest much beyond the usual recommendations:
Have a look through /var/log/messages - I get a few lines like
Sep 21 07:45:34 localhost dbus[718]: [system] Activating service name='org.freedesktop.ConsoleKit' (using servicehelper)
Sep 21 07:45:34 localhost dbus[718]: [system] Activating service name='org.freedesktop.PolicyKit1' (using servicehelper)
Sep 21 07:45:34 localhost polkitd[949]: started daemon version 0.105 using authority implementation `local' version `0.105'
Sep 21 07:45:34 localhost dbus[718]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Sep 21 07:45:34 localhost dbus[718]: [system] Successfully activated service 'org.freedesktop.ConsoleKit'
that seem to indicate things are happy.
You've already posted your /var/log/Xorg.0.log - the only thing that caught my eye there was the vesa module load failure, but I'm assuming that is okay since the intel module was loaded later.
Also have a look through the output of dmesg - mine doesn't show anything of interest, but I'm not having the trouble.
Unfortunately, that's about as far as I can go. To be honest, all this *Kit/dbus stuff baffles the heck out of me. I'm an old-timer, so I never saw the need to go any farther than the original Unix permission flags. Anyway, the fact that you can run it as root but not as a normal user really smells like a permission flag, group membership, or rule problem. I just don't know where better to point you.
Mike
BTW, the e-svn-arche17 packages I use pull in the very latest subversion level every time they are run and compiles it fresh, so they are always the bleeding-est edge stuff. Even if the packages themselves don't change very often, what they produce does. However, I doubt very much that this is the problem. -
The latest Firefox won't run with Mac OS 10.4.11. How can I get the previous version of Firefox?
I have Firefox 12.0. It won't run with Mac OS 10.4.11. I do not want to have to buy a new computer right now. I would like to go back to a previous version of Firefox that will run with my operating system. How can I download an older version of Firefox?
You can find the latest Firefox 3.6.x release in all languages and for all Operating Systems here:
*ftp://ftp.mozilla.org/pub/firefox/releases/latest-3.6/ -
How to change the Browser title when report runs on the web?
Hi folks,
How to change the title of the browser when I run my report on the web? Iam using Internet explorer and Reports 6i. Is it possible in 6i or 10g reports?
Could you please tell me the step by step procedure ?
Right now the browser is displaying the URL when I run the report with format = PDF.
Thanks.It works for me. I don't see why you have a problem with >this code.
Can you look at the source code of the html >file that was created (so, not in the browser, but in a >text editor). What do the header and title look like?The Html code in the file is same as the above code I specified. Actually I copied the same code and pasted here. But when I run the html file the Title shows up.
Don't put </html> there. Maybe that helps. I tried this, but it did not work.
Please let me know is there any way to set it dynamically inside the triggers using SRW built_in.
Thanks alot. -
why is a world icon appearing when i turn my mac book on instead of the apple icon, is this some kind of calling or what i need to know noww
Just FYI for future questions, this is the Mac Pro forum. The MacBook forum can be found here:
MacBook
Regards.
Maybe you are looking for
-
Installing software for my HP psc 1210 all-in-one printer on to my Mac?
I have downloaded new software and drivers for my all-in-one printer. I am running OS X 10.5.2 on a 20" 2.16 GHz Intel Core 2 Duo. The computer recognises that a printer is present and I can print with no problems. The problem that I'm having is with
-
So I downloaded iTunes 7 and it keeps asking me to update my 60g to version 1.2 (I currently have 1.1.2), but every time I try to do it I get a message that says "The iPod cannot be updated because it contains files that are in use by another applica
-
Multiple monitors - how to define which monitor files open on
Mac OS 10.8.X PS CS6 I work on a Mac with three monitors. My primary monitor is in the middle. I often will drag images to one of the side monitors where they'll stay open while I'm working on other images. But photoshop will open the next image I ch
-
Macromedia Dreamweaver Forum Design PHP Uploading on to Web.
I have downloaded the php files from here and I have tryed to test it out by uploading it but it does not work and it comes out looking different to the Design view in Dreamweaver 8. I have uploaded everything in the Complete_app folder as I want jus
-
The javascript files are getting loaded in the reverse order in Firefox 28 but it works fine on IE, Chrome and Firefox 27 as well. So what exactly are the changes made in firefox 28 that causes this??