The contact image is gone once you activate call i...

i just got my nokia 5800.. and i have assigned some image "assign as contact image" to my contacts... so when that particular person calls, his or her picture will be shown.then i went into settings ---> personal---> theme---> this is this option called call image. You can choose user defined which means that you can assign one particular picture to show everyone anyone calls...however when i want to deactivate it , i choose none as previous but now the contact image does not show anymore when that person calls!
is this a bug or am i not getting the setting right?
any advise? Thanks!

can i ask what software version are you currently having? mine is V20.0.12 . mine is currently set to "none" and my contact image does show when the respective person calls but if i change and set a pic for the caller image and later get it back to "theme image" it will no longer show the contact image but the default wallpaper for that particular theme. I thought that this could be a problem with the theme itself because i have notice something very strange too.. certain theme which i'm using ( not the default theme supplied by Nokia) when i try to change to the other tabs for example bluetooth, there is no response, doesn't work but once i change back to default nokia theme , it works.
but i'm trying this right now with the default theme from nokia sound wave..

Similar Messages

TS1389 where is the "authorize your computer link" once you are in the apple store????????????

where is the "authorize your computer link" once you are in the apple store????????????

erinsawyer wrote:
where is the "authorize your computer link" ...
On your Computer...
Open iTunes...
If you're using iTunes 11 click on the box icon in the top-left corner to see the " Show Menu Bar "
and from the Menu Bar select Store...
From the Store menu, choose Authorize This Computer.
(In earlier versions of iTunes, access this option from the Advanced menu).
When prompted, enter your Apple ID and password, then click Authorize.
See Here for full details...
About authorization and deauthorization

TS3899 I have an iPhone 5 and it shows on the Mail Icon that I have over 3,000 emails to read but the number continues to increase even when I have read the email. I thought once you have read an email it drops off the count of "new emails"

I have an iPhone 5 and it shows on the Mail Icon that I have over 3,000 emails to read but the number continues to increase even when I have read the email. I thought once you have read an email it drops off the count of "new emails"

The received emails should show in two locations:
1. In the All Inboxes tab of Mail.
2. The Inbox for each mail account,
If your emails are not showing in these locations try quitting the mail app and then reset your iPhone.
Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it wiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal.
To reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

How can you delete the mail account on iCloud once you've added one.. If it were wrong...

How can you delete the mail account on iCloud once you've added one.. If it were wrong...

I have the same problem, someone pleeeaase help.

All the imported images are gone

I've made an animation in Adope Edge Animate with a lot of images imported from the same directory folder as the animation.
But the next time i had started up the animation, all the images are gone. The animation is saying they are still there, like in the elements and the timeline section, but doesn't show them.
Does anyone know the problem? Maybe you have to show the directory folder of the images again or something?

Is the images folder in the composition folder present?
If you delete it your images are lost and do not show up .
If that folder is present ,can you PM/post your animate files.I can have a look.

Activate Windows 8 Enterprise over the phone (The option to choose what country you are calling from is greyed out)

I am trying to activate Windows 8 Enterprise. However, the workstation I'm running it on is not able to connect to the Internet. So, I select "Activate over the phone". However, the "Click nearest location" is greyed out.
The default is set to Afghanistan, which unhelpfully lists a toll number to call in Afghanistan...which would work if I lived in Afghanistan, but I don't. Other than pluggint the system into the Internet is there a way to activate my copy of Windows
8 Enterprise over the phone? I need a toll free US number.

I appreciated the tip. However, it is not the answer to my post. I only need a toll free US phone number to complete over the phone activation. Like I said in my original post, the drop-down selection box is greyed out and only shows a
number for users in Afghanistan.
If phone activation for the evaluation version of Windows 8 Enterprise is unavailable, then THAT should be the answer.
Here you go...
1-888-725-1047
Regards,
prathaprabhu

Why Has The View Image @ %age Gone??? and Comment on 'Content Aware' Healing Brush.

PLEASE, PLEASE BRING BACK the View Image @ 'x' %. on the Top Bar.
It is necessary to view all images at 100% to check for dust on sensor.
It is necessary to view portrait images at 50% to remove obvious skin blemishes before final editing.
Two 'clicks' on CS5 - A convoluted process in CS6 Beta!
Omitting this option is a major retrograde step!
Appreciate the difficulties with this option and it is a plus.
Would be great if you could select an area in one area of image and scale it content aware into another selected area!

There are various ways such as using the Clone Source Panel to scale the source and then use the healing brush, though it doesn't have content aware per se.
Emblem on sterring wheel to mirror:

I have followed the instructions to add a playlist with iTunes 11. With my iPod and my daughter's iPod it's fine and comes up with the 'on this iPod' icon once you have clicked on the device. When I use iPhone no 'on this iPhone or Add comes up? Help!!!

I have found with iTunes 11 that to move music over on my iPod it works very well and shows the 'on this iPod' button when you click on the device.
With my iPhone however, you can click on iPhone but then there is no 'on this iPhone' button or the add button?
Is it something to do with the settings on my phone?
Please help as Zi wish to transfer some music across.
Thanks

Some other posts seem to indicate that the cause is related to voice memos. You may want to try the remedy described in this document
http://support.apple.com/kb/ts2830
although it says it's for the 6th gen iPod nano.

After installing latest update the contact photos don't show on incoming call

After installing latest update the contact photos don't show on incoming call

Possible iTunes issue:
Try the following after adding photos.
Go to file
Then Home Sharing
Select photos to share
Click on All Photos already selected Do anyway
When Apply turns black click on Apply
Now go to Apple TV to see if photos there
Or restart iTunes.
Works for me every time photos do not appear on my Apple TV 3
Hopefully will work for you.

How can I use either the contact center reporting or CAR to identify calls transferred from agents to other extensions?

We are not to the call manager and I am trying to find a way to report calls that were received to our customer service agents though the call queue but were subsequently transferred to an extension out side of the queue. With our implementation we changed call routing and need to see how many misrouted calls are getting to the queue.

Marc,
Are you on UCCE or UCCX? If you're using UCCE, the Termination_Call_Detail table includes a record of all transfers made by Agents.
-Jameson

HT201272 Is there any way to open the apps on your computer once you have sync your phone

Is there any way to open an use the apps once u have transfered them on your computer
from your Iphone ??

No.
Apps are for iphone/ipod/ipad only

Is there a way to go back to the cover of a book once you've started reading it?

When you open a book in iBooks, the full size cover appears briefly before the book opens to the beginning or the last place you were reading. But, I can't find a way to go back to the cover. Sometimes I'd like to look at the full size cover, but it doesn't seem possible.

Go to the table of contents is one is shown at the top of the page and then use the left arrow key or click on the left side of the page to move back to the cover page. If there is no ToC then just use the left arrow key or click on the left side of the page to move back to the cover page.

How do you change the tempo on a track once you have started the editing process

I dont know why but i cant figure out how to change the tempo of a track after i have set it before creating the project and begin the editing process on it. i just want to be able to slow the song down because some times i miss the desired tempo range and set it to something completely contrary to what i am trying to do. Please help me because am new to thins. thanks.

Alieufromwa wrote:
how to change the tempo of a track project after i have set it
http://www.bulletsandbones.com/GB/GBFAQ.html#settempo
(Let the page FULLY load. The link to your answer is at the top of your screen)

Where do the Management Pack Files go once you import them

Hello
Hopefully this is a simple question, I may just be missing some thing obvious
I have SCOM 2007 R2
When I download and run the MSI to unpack he MP, I understand where it extract the files. I then go to SCOM Console and Import the MP, not problems so far.
However I would expect the MP import process to also place a copy of the MP in the "C:\Program Files\System Center Operations Manager 2007" folder. However on several occasion when I have needed to point/find a Management Pack for various reasons, the
MP or MPs do not appear to be in this folder. I guess I could always go back to the location where the MP is extracted from the MSI and reference them there. However I thought they should all reside in the "C:\Program Files\System
Center Operations Manager 2007" folder as a matter of course.
Any advice, most welcome please
Thanks
AanotherUser

Hi AanotherUser,
It depends on a management pack, some of them place a copy of .mp files to C: drive, some don't.
Useful link:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/7d856549-0be8-4781-9e2b-3fea82c2e377/default-install-location-for-opsmgr-2012-sp1-management-packs?forum=operationsmanagergeneral
Natalya

I got the iphone 5, got some pics and msgs and contacts on it, and when i connected to my PC to restore my previous info from the old iphone, all the new stuff are gone, how can i get it back, thanks for help.

i got the iphone 5, got some pics and msgs and contacts on it, and when i connected to my PC to restore my previous info from the old iphone, all the new stuff are gone, how can i get it back, thanks for help.

The voicemail system used for the iPhone is different from the voicemail system used on the rest of the Verizon Wireless network. When you activate the iPhone, you lose your saved voicemails from the other system. When you activate a non-iphone, you lose any saved voicemails from the iPhone voicemail system too.

The contact image is gone once you activate call i...

Similar Messages

Maybe you are looking for