The Control Button In FCP Viewer Screen For Titling - Missing.

I'm unable to get the Viewer Text in my viewer screen in FCP. I need it for titling. Re-installing doesn't get it to re-appear and I'm nervously stuck.
Help anyone, please . . . ?

I'm not too happy about your not being too happy.Restarting is a completely different option from reinstalling FCP. There is nothing in your two previous posts to suggest you have been using FCP for a long time, in fact, the language you used indicates the opposite. Your use of the term "programme" suggests there is a translation issue which is not m problem, it's yours. All I can do is attempt to get you clarify what you're really trying to do.
You're not happy? Push the report button. One does not acheive the status of being a Level 7 participant around here without upsetting a few people along the way.
bogiesan

Similar Messages

Hello. I want to use my iphone as a viewing screen for a usb endoscope, (its a small camera on a long cable for inspecting down piping and such) with an app is it possible to attach the usb to my iphone using a adapter to watch the live video feed on th

Hello. I want to use my iphone as a viewing screen for a usb endoscope, (its a small camera on a long cable for inspecting down piping and such) with your app is it possible to attach the usb to my iphone using a adapter to watch the live video feed on the iphone?
Thankyou.

Hello. I want to use my iphone as a viewing screen for a usb endoscope, (its a small camera on a long cable for inspecting down piping and such) with your app is it possible to attach the usb to my iphone using a adapter to watch the live video feed on the iphone?
Thankyou.

Ipad 2 screen is black . when i press the power button it takes a screen shot but i have no functionality . tried holding the home and power button together but the screen just flicker and stay black . no apple icon shows up. help please

ipad 2 screen is black . when i press the power button it takes a screen shot but i have no functionality . tried holding the home and power button together but the screen just flicker and stay black . no apple icon shows up. help please

Make sure it is charged for about 10min using the adapter, then connect in recovery mode, explained in this article:
If you can't update or restore your iOS device

Has the play button in album view stopped working?

The play button in album view doesn't work. Hasn't worked for the last two releases. I'm on iTunes 11.1.1. Apple suggested reloading all of my CDs. (Not a viable solution--there are hundreds of them...) They thought it might have something to do with recent changes related to AppleID/iCloud. Also unable to add entire album to up next list. I am able to play from songs view.

Never mind. Found the answer here: https://discussions.apple.com/message/21484039#21484039
User error, but I'm not alone...

Cannot operate youtube videos in Firefox. Cannot use play, pause, volume, or any of the control buttons.

None of the control buttons work, it's as if the darn video window is part of the backgroun.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

I shrank my Yahoo e-mail by pushing the control button. How do I restore to original size

I shrank my Yahoo e-mail by pushing the control button. How do I restore to original size?
== This happened ==
Just once or twice
== I pushed the control button

I corrected my problem, which was having very small print when I went to Yahoo e mail, by clicking on reset on the view menu. Only my text was small, the toolbars were fine.

How can I stop the control button from moving the open applications up and exposing the desktop?

It is getting very annoying when I want to use the control button for other functions.
I tried looking in settings under keyboard, but found nothing.
If anybody knows how to change it, I would really appreciate it!
Thanks,
Neel.

Please describe what you are doing and what is happening more fully. I can press the control key all day long and nothing happens.

Before I upgraded my iPad mini, you could turn off apps to save battery power by double clicking the control button and then holding your finger on the app button until the minus sign appeared. That doesn't work anymore. How do you turn off the apps wit

Before I upgraded my iPad mini, you could turn off apps to save battery power by double clicking the control button and then holding your finger on the app button until the minus sign appeared. That doesn't work anymore. How do you turn off the apps with ios7

Now you swipe downward, the app will appear and you delete, keep scolling to the right as in the past. With the new operating system you also swipe downward to get the search bar to find an app

ITunes 11.1.4 (62) can't find the info button to set up sync for contacts, calendars, etc.

I'm running iTunes 11.1.4 (62) and can't find the info button to set up sync for contacts, calendars, etc.

That option has been removed with Mavericks. Syncing for calendars and contacts etc can only be done through iCloud:
https://www.apple.com/au/support/icloud/contacts/

Could not create the flash button because a component of Dreamweaver is missing. Please reinstall Dreamweaver.

I have Dreamweaver MX 2004 and then upgraded to
Dreamweaver Studio MX 2004 and decided to upgrade to Studio 8. At
the time I got the Studio 8 I also upgraded my computer and now my
purchased flash buttons do not work on my system. I get an error
message Macromedia Dreamweaver Could not create the flash button
because a component of Dreamweaver is missing. Please reinstall
Dreamweaver. We tried uninstall and then reinstall and still no
fix. My husband tried the software on his lap top and they work
fine. I did have Contribute installed but uninstalled it . 1. What
would the missing component be? and 2. Why didn't the reinstall
work? Thanks for the help. I need to update a couple of sites that
use the buttons and can't so far. Carol

you probably have to install the Dreamweaver update so that
you're on
version 8.0.2. just search Adobe.com for Dreamweaver update
and you
should be able to find it pretty quickly.
cpt_vom wrote:
> After a reinstall of Window XP and Drewamweaver ver.8
I'm running into a
> problem.
> When inserting a flash button I get the following
message:
> :Could not create the Flash Button because a Component
of Dreamweaver is
> missing. Please reinstall Dreamweaver:
> Not a word about which Componement missing!
> I have tried to instal Dreamweaver several times but
without result - same
> message appears.
> The button in question is 'FZ Pack 3: Multi Buttons'.
> I can insert the standard buttons with no problems and I
have also tried to
> insert this button on my second PC with succes which
could indicate a problem
> with my main PC, maybe something to do to Windows XP?
> I really would appreciate an solution to this problem
and hope somebody could
> help.
>
> Kind regards,
> Kjeld - Copenhagen - Denmark
>
>

I can't use the control center from my lock screen.

I just updated my iPhone 5c to the ios 8.0.2, but previous to that update I was able to use the control center from my lockscreen. But now, I can't. I already tried to disable restrictions and it didn't work. Please help.

Check the settings for this And make sure that the availability of the Control Center from the Lock Screen is turned on.
Settings > Control Center > Access on Lock Screen
If it is turned on there try a reset of your iPhone. Press and hold both the Home button and the Sleep/Wake button continuously until the Apple logo appears. Then release the button and let the device restart. You will not lose data doing this. It's like a computer reboot.

How to enable the 'FIND' Button in Module Pool Screen. Logic please

Hi All,
   I am writing one Module Pool Program. I have one requirement like I have to put FIND, FIND+ buttons on different screens.
   I am able to do the code for normal FIND. According to my requirement I have to display one Popup when the user click on FIND button. Once he entered some value it should find all the records and all the fields and display the list of hits in another popup. This whole process should as same as in SE11 Transaction functionality.
   Example: SE11 ->Table Entries -> and click the FIND Button. I need the same functionality in my Program.
   Please let me know ASAP. If you provide some code sample it will be Great.
Thanks & Regards
Kiran

Hi
If you have just implemented the code for FIND I believe u need to add some little modifications for FIND+.
U need only to manage the position of the last found value, so u need to go on from that position for FIND+.
The position should have the two coordinates X (the position in the record) and Y (the number of the record):
- FOUND should start for postion = 0, 0
- FOUND+ should start for position = X, Y
Max

How to suppress the Push button in a custom screen

Hi,
   Is there any procedure to suppress a Push button in a custom Screen based on a condition.
For eg: If Material is not initial.
            then display the Continue button.
         else not.
          endif.

Hi,
If the push button is not on the application toolbar, then follow the below procedure...
1. Assign the MODIF-ID for the button in the screen. Assume that MODIF-ID for the button is SC1.
2. In the PBO of the screen add the below code...
IF not MATERIAL is INITIAL.
LOOP AT SCREEN.
   IF SCREEN-GROUP1 = 'SC1'
    SCREEN-OUTPUT = 1.
    SCREEN-ACTIVE = 1.
    MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSE.
LOOP AT SCREEN.
   IF SCREEN-GROUP1 = 'SC1'
    SCREEN-OUTPUT = 0.
    SCREEN-ACTIVE = 0.
    MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
Regards,
Vara

The 'R' button isn't coming up for audio recording track

Hi, I'm trying to record in vocals in logic pro, i can get the track up for it, but there's no 'r' button to press to record it in, and the 'record enable' option is checked. Any help would be amaizng please!

Hi
Have you assigne the Input for the Channel Strip?
Maybe you have the R button disabled in the Track Header? Control click on the Header and choose Configure...
It would be helpful if you could confirm which version of Logic you are using Logic Pro 9.x.x or Logic Pro X
CCT

How to handle The Back button on Module Pool screen

Hi Gurus,
I have created a module pool screen. In that screen I have used some input/output fields(text box) which i have marked mandatory by making the input field as "required" under program tab.
now when running the screen if no data is entered into these mandatory input field then BACK button does not work. First I have to enter some data into the input filed only then the BACK button works. How should i code so that the back button works even without entering the data into these mandatory fields.

hi,
use AT EXIT-COMMAND with the module.
eg. module user_command at exit command.
then there will be no problem.

The Control Button In FCP Viewer Screen For Titling - Missing.

Similar Messages

Maybe you are looking for