The correct firewire for the MBP June 2009

I have a camcorder that has a 4 pin and said the MBP 13 has a 6 pin and buy a 4 to 6 pin firewire. I did and the 6 pin doesn't fit. I couldn't find the exact spec for the MBP but which is the correct one?

is it in the manual somewhere.
All MacBook Pro models have a six or nine pin FireWire port; since the six pin cable didn't fit, you need a nine pin cable. No Mac ships with a four pin port. The documentation you got with the camcorder is out of date.
It's not a proprietary connection correct?
Correct.
(47922)

Similar Messages

  • Adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem

    Hi,
      I got this message after importing about ten or so H.264 files that I encoded from Adobe media encoder.  "adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem."
    The files we're shot with HD cameras.  Edited in Premiere Pro CS3.  I installed the update 3.0.1 with still the same error.
    I also tried a brand new project and after about ten or so files being imported into a timeline, the system crash.  I tried this twice....
        Thanks in Advance

    Hi Hunt,
           Here is the skinny.  A window base PC.  footage shot with HD sony HD cameras,  Project imported to Premiere CS3.  Once completed sent file to Adobe media encoder and render them as H.264 widescreen high Quality.  Imported them to Adobe Encore CS3.  After about ten files or so.  I got the error message.  Did all the basic trouble shoot like restarting the computer, got latest patch.  Even build a new test project with the same problem.
        Something else I read in the forums, is the encore will transcoded the project to Mpeg 2 anyway, after looking at my project I realized those few files were indeed untranscoded.  So it will be a double compression and I dont want that.  So, my new question is, what is H.264 good for ?????????? I was research that Mpeg 2 is a faster render but H.264 is a slower render but better quality.....
       what do you think ????
       Peter

  • I just got an iPod shuffle yesterday and I have downloaded the latest update for iTunes (10.7) and when I plugin it in it says that I have not got the correct software for the iPod

    I just got an iPod shuffle yesterday and I have downloaded the latest update for iTunes (10.7) and when I plugin it in it says that I have not got the correct software for the iPod

    What is the exact error message you are receiving?  Have you checked to make sure the connections on each end of the USB cable are nice and snug?
    B-rock

  • Can someone tell me the correct driver for the fuji xerox docuprint p205b for os x  as the one on the fuji site does not work thank you!

    I am desperate to find the correct driver for the p205b docuprint priner i know that the one on the fuji site is wrong and you need to install a driver for anothe rmodel as I found this in a forum last year and successfully installed on another mac but now I don't know where I got the info from, help !!!  =)

    I have the same printer and I'm using Lion 10.7.4.
    I'm facing problems getting the mac to print via wireless.
    I've installed the driver from http://support.apple.com/kb/DL904 as suggested by sig.
    I've linked up the printer to the router via usb. It works like a charm with usb on Lion and wireless on windows.
    Could anybody help ? I've included photos for more information. Many thanks.

  • What are the correct settings for the Canon 5D mark II in FCP 7 ?

    I am shooting full HD at 23s97 fps.. tried making a preset for the Canon but when I import fils FCP always wants to change to appropriate settings for this file type but doesn't tell me what that is...
    (latest firmware installed)
    Please, can someone provide all the correct settings for me?
    And also, why doesn't the camera show up on the desktop/in the menus when attached to the mac? I have ro use EOS utility every time I want to get anything off of the camera... and FCP doesn't see it either. That's just not right - FCP MUST recognise my camera!! : (
    Please help - I don't want to start editing until I have the right settings for this footage.
    Thanks
    Jim

    Welcome to the Boards
    Not sure what you mean with the following, looks like a word dropped?
    I have ro use EOS utility every time I want to get anything off of the camera...
    Anyway, some more specs on your system could help point where the issue is. With the new Plug-In by Canon you can Log & Transfer from the Flash Card (not sure how you connected the camera.) Alternatively you could just drag the files in (but make sure to keep all files such as THM in case you use Log and Transfer later.)
    Generally it is best to transcode to Pro Res to be able to work with the files in Final Cut. (Log & Transfer should do that, or using Compressor/Mpeg Streamclip.)
    It (Final Cut) is probably changing the timeline to match the codec, or depending on your last preset used, just switching things around. In other words if you were editing in DV and had a set up for that, new sequences would default to that and if you try to ad anything else you will get the message.
    Take a look at the search over there -> to look for the Canon 5D threads for some more info.
    What I would do is just pull one of the clips in to start and look at what the sequence settings are aftr Final Cut changes them for you - they should be fine generally, though you will want to change Codecs to Pro Res.
    I like just batch conversion of all my clips from the 5D Markk II and then work from there. (I do not hook up the camera to the computer, just use a card reader.)

  • CONFUSION ON WHAT IS THIS NOTEBOOK SO TO GET THE CORRECT DRIVER FOR THE SOUND CHIP

    THE BOTTOM OF THIS NOTEBOOK SAYSIT IS:
    PRODUCT:  HP PAVILION dv 1000
    SN#[Personal Information Removed]
    PN# PM054UA#ABA
    NOW WHEN I PUT IN THE PN# IT BRINGS UP 
    HP Pavilion dv1040us Notebook PC Drivers
    IS IT POSSABLE THAT THIS WAS BUILT AT THE TIME OF THIS CHANGE.  THE SOUND DRIVER FOR THE 1000 DOES NOT MAKE A CHANGE AND THERE IS NO SOUND BY THE BUILT IN HARMAN/KARDON OR HEADPHONES.
    MAYBE IT IS A BURNT OUT CHIP AND IF SO WHAT SOFTWARE CAN I USE TO TEST THIS?
    I HAVE TRIED ALL I KNOW AND AM OPEN TO SUGGESTIONS.  DO I CHANCE USING THE DRIVERS FOR THE 1040?
    THANKING ANYONE FOR ANY SUGGESTIONS.  J
    This question was solved.
    View Solution.

    Hi,
    The following link shows the specs of your machine:
       http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00247186
    Yes, it is a dv1040us and its product number is PM054UA#ABA. Tis must be very old machine because I can't find more than:
      http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=228&lc=en&cc=us&dlc=en&sw_lang=&product=43374...
    For sound, please try Conexant CX20468-31 AC97 Audio Driver:
               http://ftp.hp.com/pub/softpaq/sp28001-28500/sp28481.exe   
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • What is the correct charger for the new iPad Air 2?

    Our new iPad Air 2 came with a 10Watt charger. Went to the apple store to get a spare. The Apple folk insist the 12 watt unit is what it needs  - sold my will two. Just trying to figure out which is correct for a new Model= 'MGKL2LL/A' iPad Air 2.
    Thanks

    Skydiver119 wrote:
    Either will work. Many people say they received a 10W with their iPad, but it will charge just fine with a 12W. Previous models were shipped with 12W chargers, so no one really knows why the 10W was put in with the Air 2.
    I would guess the Air 2 got a 10 Watt Charger, because the battery in the Air 2 is a bit smaller than the battery in the Air.

  • What is the "correct"  name for the new iPad?  Is it also called the 3rd Generation?

    I have the latest iPad, purchased Mar '12.  But when I read Apple News it is referred to as the "new ipad" & somtimed the 3rd Generation.  What is the "correct name & will "SIRI" be available with this Fall latest update?  Thanks!!!

    Yes, it is somewhat confusing isn't it. Almost like, the iPad is having an identity crisis. I believe the official Apple line would be that it is the "New iPad" but I see it referred to the 3rd generation just as frequently as the new iPad.
    Siri will be available for the "new iPad/3rd Gen when iOS 6 is released this fall.

  • What are the correct permissions for the Home folder?

    Since buying my first mac (G4 iMac) I've since bought 2 other macs & transferred my home folder from the older computer each time. Since then I've messed around with the permissions of the Home folder a few times to try share files & folders between my Windows PCs. So the permissions of the Home folder on all computers could be messed up a little.
    I want to set up permissions how they should be set up as default.
    I created another user account with admin priveliges & it looks like the Home folder should be set up as follows:
    Owner: 'my name'
    Access: Read & Write
    Group: admin or 'my name'
    Access: Read only
    Others: Read only
    And the sub folders (Documents, Pictures etc.) should be set up as follows:
    Owner: 'my name'
    Access: Read & Write
    Group: admin or 'my name'
    Access: No access
    Others: No accesss
    Is this correct, & if so shall I just set permissions on my Home folder exactly the same as the new account I set up?
    Or is there some way of resetting permissions for the Home folder?
    (I know repairing permissions with Disk Utility doesn't do this).
    Power Mac G5 Dual 2.3, 2.5 GB RAM, 20 Cinema Display | MacBook Pro 2.0 15"   Mac OS X (10.4.6)  

    Mac OS X does not have a built-in way of doing this, but you can make one yourself. Open the Script Editor in the /Applications/AppleScript/ folder and enter the following:
    do shell script "chmod 755 ~"
    try
    do shell script "chmod 700 ~/Desktop"
    end try
    try
    do shell script "chmod 700 ~/Documents"
    end try
    try
    do shell script "chmod 700 ~/Library"
    end try
    try
    do shell script "chmod 700 ~/Music"
    end try
    try
    do shell script "chmod 700 ~/Pictures"
    end try
    try
    do shell script "chmod 755 ~/Public"
    end try
    try
    do shell script "chmod 755 ~/Sites"
    end try
    This script can be saved as an application, which makes it possible to fix the permissions on a home folder with two clicks. The try statements are included so that the script will run if a folder doesn't exist. If the ~ object is a symbolic link, the permissions on it may not be changed; you can use the code block
    tell application "Finder"
    set the_home to POSIX path of (home as alias)
    end tell
    do shell script ("chmod 755 " & the_home)
    in this case. The rest of the script works as before.
    (12450)

  • The software that's used to decode the media is not available on this system. Installing the correct decoders for the files you are working with may help to correct the problem.

    I'm trying to make a DVD menu in Encore, and then when it came round to loading my AVI  files into it, bam. Apparently, I don't have the decoders necessary - this is unusual.
    I'm running on a Apple MacBook Pro, and I have Perian installed for all my codec needs. I just don't understand!
    Any help would be most appreciated...

    Welcome to the forum.
    It is most likely that the error message is telling you the truth - the necessary CODEC is not available. It might not be installed, or might be broken.
    The first step is to gather the full details of your .AVI files. This ARTICLE will help explain the potential issues. Sorry that the utilities mentioned are for the PC. Do not know if you can run them in Parallels, or Bootcamp, or other, but similar should be available for the Mac if you cannot.
    I have to admit that I know little of Mac's, and especially how they install and handle CODEC's. On the PC, I can offer help there, but not in this case. Again, with my "sorry."
    There could be two ways to handle the issue, and that might depend on the info gathered afer you read the above article. It could be that the simple installation of the proper CODEC will fix it perfectly and easily. Or, it could mean that you will need to convert your .AVI to something along the lines of a DV-AVI. Though I do not use them in Encore, I have no problem working with .MOV [Animation CODEC] files from FCP in my PrPro. I've just always done all editing in PrPro, before Exporting/Importing to En. I do not know how En will handle .MOV's, but if some Mac-only CODEC is used, probably not so well.
    Good luck,
    Hunt

  • Why doesn't updating a book in framemaker 10 show the correct tabs for the table of contents from th

    I'm using Framemaker 10.0.2.419 to build a book.  I can generate a TOC by following the web tutorials.  When I go to the reference page of the TOC file and format the paragraph tags, any formatting requests with tabs aren't realized when the book is updated.  Things like font changes and leading and trailing space following a tag are.  When I go back to the TOC body page and look at the paragraph tag in the paragraph designer, the proper description including the tags is present.  For some reason, Framemake isn't recognizing them.  I've closed the book and re-opened it to no effect.  Is there something that I'm doing wrong or is this a know bug in the product?

    Reference page showing that the tabs are in effect.
    Snippet from the body page showing that the tabs are NOT in effect for the reference page.

  • Confused on FIM Service MA. It does not seem to be pulling my AD users into the correct place for the Portal

    I ran a full AD import which gave me about 20K of adds.
    Per the FIM Book I have I set a connector filter to filer out the admin and built in sync accounts
    After running that MA I got 2 adds.
    How do I get my AD users into the portal if FIM service does not import them. Is it a synch? I don't want to synch anything from the FIM DB back into AD, so I am being cautious 

    Hi,
    import just fills the connector space of fim sync.
    connector space is like some kind of cache of the connected data source which FIM lets calculate delta which need then to be synced to the MV
    so after import you need to have a sync rule in place for ad (or MA import attribute flows).
    if objects needs to be created in MV you must project them by either projection criteria or by enable ceate object from external data source in sync rule.
    Objects are in MV then, an will can be exported to fim service ma regarding to the export attribute flows of the fim service ma.
    -Peter
    Peter Stapf - ExpertCircle GmbH - My blog:
    JustIDM.wordpress.com

  • My phone is logged in as my old apple id and it is telling me that the password is wrong, but i am typing the correct password for the new apple id... how do i change it!

    My phone is logged into my old apple ID and is telling me my icloud can not sign in. I am synced into the new apple id on my mac and there is no problems. I have reset the password about 4 times. I need help

    Settings > iTunes and App Store > Apple ID = Sign Out...
    Then Sign In using the preferred Apple ID.
    Note:
    Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
    Apple ID FAQs  >  http://support.apple.com/kb/HT5622

  • Correct term for the Safe attribute in creating New Managed Property

    Hi,
    I'm creating a new managed property through Powershell and XML. I need to set the Safe attribute to true. Do you know the correct term for the Safe attribute? I have tried "Safe" and "SafeForAnonymous" but still didn't worked.
    <Property ManagedName="ArticleStartDateOWSDATE" CrawlName="ows_q_DATE_ArticleStartDate">
          <Crawl Category="SharePoint" PropSet="ed280121-b677-4e2a-8fbc-0d9e2325b0a2"  Variant="31" IsEnum="false" />
          <Managed Type="1" Queryable="true" Refinable="false" Retrieve="true" FullText="false" RemoveDup="false" Respect="false" Multi="false" sortable="true"
    WordBreaker="false" SafeForAnonymous="true"/>
        </Property>
    Regards,
    Napster

    Hi Napster,
    How do you create managed metadata with PowerShell?
    If you use PowerShell cmdlet New-SPEnterpriseSearchMetadataManagedProperty to create a new custom Managed Property, both parameters
    -Safe $true and
    -SafeForAnonymous $true could work, and ManagedPropertyInfo has property SafeForAnonymous, so it should be better to use SafeForAnonymous.
    Please try to get the correct attribute name and value from XML file, then pass it to the PowerShell cmdlet  New-SPEnterpriseSearchMetadataManagedProperty parameter -SafeForAnonymous, then check results again.
    Here are some useful articles about this topic you can take a look.
    http://blog.kuppens-switsers.net/sharepoint/creating-managed-crawled-properties-using-powershell/
    http://sadomovalex.blogspot.com/2014/02/powershell-script-for-creating-and.html
    http://technet.microsoft.com/en-us/library/ff608089(v=office.15).aspx
    http://msdn.microsoft.com/en-us/library/microsoft.office.server.search.administration.managedpropertyinfo_properties(v=office.15).aspx
    Thanks,
    Daniel Yang
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] 
    Daniel Yang
    TechNet Community Support

  • Which are the correct settings for gmail in MacBookPro

    I want to use mac mail to access my gmail. Can I  ? instead of going directly to web to access my gmail.? Which are the correct settings for the incoming and outgoing servers ?

    Hi,
    Yes. You can absolutely access your Gmail account from within either Mail or Microsoft Outlook for Mac. Make sure, that you have enabled POP/IMAP in your Gmail settings, then follow the instructions here: http://mail.google.com/support/bin/answer.py?hl=en&answer=180188 if you wish to access your account via POP3 instead of IMAP, change the incoming mail server to pop.gmail.com
    Regards,
    Gábor

Maybe you are looking for