The correct sequesnce
What is the correct sequence for the install of discoverer that is bundled with 10gias. do i have to install the database first ect
database10g
appserver10g
discoverer10g
According to your output you have ATG RUP5 installed on your 11i system. Per MOS Doc 787209.1 (How to find the correct version of JDeveloper to use with eBusiness Suite 11i or Release 12), you will need patch 6012619 of JDeveloper.
HTH
Srini
Similar Messages
-
My iPod touch is not playing the songs on the playlists in the correct order. Can anyone help?
My ipod touch is not playing the songs on the playlist in the correct order.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I'm using Numbers version 3.2.2.
Suddenly I cannot access my password protected Numbers file with the correct password. I have the correct password written down so I know I haven't made a mistake.
The response box that pops up says that the file cannot be opened. There are no other options for me to choose from.Also, I tried to open it through an older version of Numbers but it sent this error message.
-
In PDF to Excel conversion dates like 03/12/15 convert to Dec 3rd 2015 not the correct date of Mar 12th 2015 whereas date 03/13/2015 converts correctly as March 13th 2015
Hi DirTech,
Are both of these dates in the same Excel file? If they're in different files, are you choosing the same language for OCR (optical character recognition)?
If they are in the same PDF file, how was that PDF file created? Was it created from a third-party application (rather than an Adobe application)? If it was created by a third-party application, it could be that it wasn't written to spec, and that's why you're seeing some oddities in the PDF > Excel conversion. (See Will Adobe ExportPDF convert both text and form... | Adobe Community.)
Best,
Sara -
An unknown error has occurred when trying to sign in , and I know I putting in the correct info, this stinks can anyone help? Because apple isn't...
urgh... just noticed my previous post said i have mountain lion... i meant that i have snow leopard. no idea why i messed that up!
anyway, i just tried reinstalling snow leopard from the usb key that came with the computer. Then, I installed software updates until it told me there were no more updates. After that, I tried the app store again, and it still is giving me the unknown error. really irked by that. may have to take it back to the apple store yet again, to see if i can figure out why the app store won't work. -
DB13 can not find the correct controlfile.
My environment is
Win2003
Oracle 10g
Ecc 6.0
When I use DB13 for the full offline backup, I get the following message:
BR0051I BRBACKUP 7.00 (13)
BR0055I Start of database backup: bdtelngh.afd 2006-08-02 21.01.03
BR0252W Function remove() failed for 'D:\oracle\DEV\102\database\sap.ora' at location BrInitOraCreate-1
BR0253W errno 13: Permission denied
BR0252W Function remove() failed for 'D:\oracle\DEV\102\database\sap.ora' at location BrInitOraCopy-7
BR0253W errno 13: Permission denied
BR0166I Parameter 'control_files' not found in file D:\oracle\DEV\102\database\initDEV.ora - default assumed
BR0274W File 'D:\oracle\DEV\102\database\CTL1DEV.ORA' not found
BR0101I Parameters
Name Value
oracle_sid DEV
oracle_home D:\oracle\DEV\102
oracle_profile D:\oracle\DEV\102\database\initDEV.ora
sapdata_home D:\oracle\DEV
sap_profile D:\oracle\DEV\102\database\initDEV.sap
backup_mode ALL
backup_type offline_force
backup_dev_type disk
backup_root_dir D:\oracle\DEV\sapbackup
compress yes
compress_cmd D:\usr\sap\DEV\SYS\exe\nuc\NTI386\mkszip -c $ > $
uncompress_cmd D:\usr\sap\DEV\SYS\exe\nuc\NTI386\uncompress -c $ > $
exec_parallel 0
system_info SAPServiceDEV JXCDEV Windows 5.2 Build 3790 Service Pack 1 Intel
oracle_info DEV 10.2.0.2.0 8192 1870 13112942
sap_info 700 SAPSR3 DEV U0388471103 R3_BASIS 0002894446
make_info NTintel OCI_10103_SHARE Apr 2 2006
command_line brbackup -u / -jid ALGOF20060802210000 -c force -t offline_force -m all -p initDEV.sap -w use_dbv -a -c force -p initDEV.sap -s -w
BR0116I ARCHIVE LOG LIST before backup for database instance DEV
Parameter Value
Database log mode Archive Mode
Automatic archival Enabled
Archive destination D:\oracle\DEV\oraarch\DEVarch
Archive format ARC%S_%R.%T
Oldest online log sequence 1867
Next log sequence to archive 1870
Current log sequence 1870 SCN: 13112942
Database block size 8192 Thread: 1
BR0118I Tablespaces and data files
Tablespace TS-Status F-Status File Size Id. Device Link Type MaxSize IncrSize BlkSize
PSAPSR3 ONLINE* ONLINE+ D:\ORACLE\DEV\SAPDATA1\SR3_1\SR3.DATA1
BR0120I Control files
File Size Id. Device Link Type
D:\oracle\DEV\102\database\CTL1DEV.ORA 8192 0 0 NOLINK FILE
BR0280I BRBACKUP time stamp: 2006-08-02 21.01.09
BR0115I Compression rate for all files 5.8422:1
BR0056I End of database backup: bdtelngh.afd 2006-08-03 06.07.57
BR0280I BRBACKUP time stamp: 2006-08-03 06.07.59
BR0053I BRBACKUP completed successfully with warnings
BR0280I BRBACKUP time stamp: 2006-08-03 06.07.59
BR0291I BRARCHIVE will be started with options '-U -jid ALGOF20060802210000 -d disk -c force -p initDEV.sap -s -w'
BR0280I BRBACKUP time stamp: 2006-08-03 06.08.06
BR0292I Execution of BRARCHIVE finished with return code 1
1.It seems the correct control file can not been found.
I have checked the file "initDEV.ora" and spfile.In them the positions of control file are "/origlogA/cntrl","/origlogB/cntrl" and "/sapdata1/cntrl".
So I donot know why the process of DB13 cannot find the correct control file and search the file CTL1DEV.ORA.
Because the correct control file could not been backuped,I can not restore and recover the database.
What causes it?
2.
BR0252W Function remove() failed for 'D:\oracle\DEV\102\database\sap.ora' at location BrInitOraCreate-1
BR0253W errno 13: Permission denied
BR0252W Function remove() failed for 'D:\oracle\DEV\102\database\sap.ora' at location BrInitOraCopy-7
BR0253W errno 13: Permission denied
How can I solve this warning? And why it occurs?
Anyone can help me?
Thanks!
Ryan FungPraveen,
I had the same problem as Ryan and Gary on a new XI \ Oracle 10g installation and your suggestion did solve this. It seems that when you run the first BRTOOLS based backup, Oracle tries to create a PFILE from the automatically generated SPFILE, but the DB user doesn't have rights to delete the SAP.ORA file. Once you assign SAP_<SAPSID>_GOBALADMIN full rights to the Oracle folder, an updated INIT<SID>.ORA is generated and the default SAP.ORA is deleted on the next BRTOOLS backup run.
Thanks for the tip.
Rgds,
Andrew -
Hi
I have an uploading problem to the server. The problem is when I try to upload a file it goes through the correct proceedure,
but does not change the remote file i.e.Index.htm, or three stages1.htm.
My Localroot folder is C:\Gods Plan Web\
The site map layout is C:\Gods Plan Web\Index.htm
The folder for the remote site is /public_html/
Should the local root folder mirror the remote site, i.e./public_html/
if this is so, what should I put into the
(a) Local Root Folder box?
(b) site map layout box?
The FTP is performing well other than changing the intended file.You should be uploading only the contents of your local root to the public_html folder (remote root).
The index.html you use as your site's home page needs to be in your site root. If you look at your Files window in DW, you should have something like the following...
Site - Whatever you named your site
index.html
images
pages
page1.html
page2.html
If you have any folder between Site - and the index.html page, like...
Site - Whatever you named your site
mywebsite
index.html
It will upload to the public_html while still in that folder, so to find your page online, you would need to type something like...
www.mydomain.com/mywebsite
public_html should NOT appear within your local files and if it existed there, would cause a redundancy if uploaded. You would need to type www.yourdomain.com/public_html to see the uploaded pages.
If you could post a screen shot of your expanded Files window while connected to the server (just connect and click the Expand button in Files, don't drill down into any of the directories), we may be able to see the issue. -
I used the wrong password to join my new belkin wifi. Now that I have the correct password, I can not get the to the join screen with the space to type in the password. I continue to get the unable to join message. I have put the touch to sleep and I have turned on and off the wifi and join options on the Network screen page. Does anyone know how to get pass this block of the wrong password to a new page that will allow me to type in the correct password. I see there is a option that asks if I want to reset the network settings.. is that what I should do? and what does it erase when I do that? Thanks for any input anyone has.
Yes. Reset network settings. Head to Settings -> General -> Reset and tap Reset Network Settings.
B-rock -
Generic track names instead of the correct artist/album/song name
I've uploaded songs to my itunes library for the past year on my ibook G4, and the bought music CDs I imported always displayed their full information (artist, song title, album etc). I just replaced my malfunctioning 40 GB black and white ipod with the 60GB color display video ipod, and now every music cd I try to import shows up with generic track names and no artist or album title. Is this due to the fact that I started using a new ipod? Or did apple change itunes within the past few weeks so that every music cd now shows up only with this generic info? Is this a copyright security measure issue?
Thanks in advance.
ibook G4 Mac OS X (10.3.9) I am now using the 60 GB video ipod with itTo get the track names etc., when importing a CD, you have to be connected to the Internet.
This article explains why.
To get the info later, select all tracks (with the generic track names) of an album and choose 'Get CD Track Names' from the Advanced menu in the menubar.
Very often the correct information will show up.
Hope this helps.
M
17' iMac fp 800 MHz 768 MB RAM Mac OS X (10.3.9) Several ext. HD (backup and data) -
My photos in a folder are not in the correct order. How can I move them around?
I Am making an album of the life of an aunt. My photos are all in the wrong order. How can I move them around in the folder?
lets use the correct words so we do not mis-communicate
are you using iPhoto or the finder? Never touch your photos using the finder if you use iPhoto!
In iPhoto folders can not hold photos - folders hold only other folders or albums - albums hold photos -- within an album you can manually arrange photos as you wish -
I have websites I use for my employer that require a password. The employer requires these be changed periodically. Always before, if I changed the password, about the second or third time I tried to log in and changed the saved password to the correct one, Firefox would ask if I wanted to save the new password. It is not doing this now. How can I get it to save a new password? It keeps putting in the old one.
Make sure that you do not run Firefox in permanent Private Browsing mode.
*https://support.mozilla.com/kb/Private+Browsing
*You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
*To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
* Deselect: [ ] "Permanent Private Browsing mode"
The website may be using autocomplete=off to prevent Firefox from saving the name and password.
*http://kb.mozillazine.org/User_name_and_password_not_remembered -
Can't set the correct key when converting imported audio to GB loops
Hi,
I feel I am really out of options for this one. I am trying to convert a couple of mp3 files to useful GarageBand loops. This is what I tried first:
1) drag the mp3 file on the timeline.
2) using a steady 4-beat, match the BPM settings to that it fits the tempo of the imported file
3) check the key of the imported file with a software instrument, and switch the project's key accordingly
4) Edit -> Add to Loop Library
Using this method, the produced loops show up in the Loops Browser correctly, but they play back in the wrong key. Example: I created a loop from a mp3 file that was originally played in A. I tagged it as being in the "A" key by creating a loop from it, with the project key set to "A".
When it then shows up in the Loop Browser, and I would select this loop with my Garageband project (still) set to "A" - I would expect to hear the loop being played in its original key.
It doesn't. It plays about four or five semitones too high (the difference between A and C, or C and E)
I haven't been able yet to figure out why this is so, or if there is any pattern in how much the key is off.
Then I searched far & wide, and found the Apple Loop Utility and a couple of articles on bulletsandbones.com. I also checked the midi import settings, though I doubt whether they have any influence here. They were set at 44.1 KHz.
This is what I tried then:
1) use bulletsandbones.com's never-fail conversion to AIF format (44.1 KHz sample rate, 16 bit)
2) use the Apple Loop Utility to "tag" the AIF file, setting it so that it shows up in the right category of the loop browser, etc.
3) also, use this utility to tag it with the key that the loop is played in
4) copy the AIF file into the Loop Library directory
5) start Garageband, and refresh / re-index the Loop Library so that the new loop is added and properly indexed
This made no difference. Or maybe it did, but the loops thus produced STILL do not play back in the key that I tagged them in (if I set the project accordingly, of course). It's completely mystifying.
I can omit a key indicator in the Apple Loop Utility, and only then does the loop play back as it should. But then it does not change with the project's key settings anymore.
Even more strange: even a loop that I tagged (in the "A" key) and saved with the Apple Loop Utility, plays back too high in that same Apple Loop Utility when I re-open it. It does play back correctly in Finder's Fast Preview.
I could not find any mention of this problem elsewhere. Does anyone have a suggestion what might cause this?I think this is the culprit:
3) check the key of the imported file with a software instrument, and switch the project's key accordingly
If the "follow tempo & pitch" box is checked, this might change the sample's pitch and throw GB off.
Try to determine the sample's key before you import it, set the GB project's key accordingly, and then import the sample. That should assign it the correct key! -
Is this the correct type of Ram for a mac mini?
I have a 2007 Mac mini, and want to go from 1gig to 2 gigs of Ram.
I currently have 2 512's
I need to know 2 things. (i'm pretty sure on both but i'm not a huge hardware guy to bare with me)
1. Will there be any compatibility problems? I.e if i upgrade to 2 gigs will it even help or because the rest of the computer is not being upgraded will it be useless?
2. If i'm good to go, Is this the correct type of Ram? http://www.crucial.com/store/mpartspecs.aspx?mtbpoid=4E665783A5CA7304
Not sure if these are needed but will post anyway:
Model Name: Mac mini
Model Identifier: Macmini2,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 1 GB
Bus Speed: 667 MHz
Type: DDR2 SDRAM
Thank you in advance <3NO, it will NOT work.
You have to find the memory specific for Mac, and rule of thumb, Mac Intel chips usually take "ECC" memory. On occasions, You can get away with Non-ECC (on certain PPC Power Mac G5 towers) -- You can check on-line stores, like Newegg, Tigerdirect, or Goolge search for the Mac Mini memory. I got mine (for my two Mac 2,1) on line, and I put 4G (2x 2G), although only 3G was available.
It is worth of upgrade it. just need to find the right memory. -
Getting the correct userid in a afterproperties in a item event receiver
HI,
am writing a custom item event receiver and i am trying to read from a user/group column. and when i am using afterproperties to get the getitembyid() for a user, am getting different values on different times.
yesterday when i accessed the same, i am getting the correct user id i mean if its "in\john.mith " am getting the values john.smith.
but today when i debugged, i am not getting the john.smith value instead it pulled the fully qualified value - i eman - along with authentication - i:#w0/.....kind of.
its strange that sometiems its working fine and sometimes the same code behaves in a different way.
can ansyone please provide any hint what exactly going on and how can i get a correct id when i use afterproperties.
help is appreciated!Hi,
According to your description, the value of the User field in the AfterProperties not always the same.
As you said, the value got changed today when you debug your event receiver, is there any change in your environment recently?
A possible reason might be that the authentication method has been changed.
There is a test in Naim’s blog about the different value of User filed in an Event Receiver when in different authentication mode:
http://naimmurati.wordpress.com/2014/07/25/user-field-in-event-receivers-when-using-claims-based-authentication-and-classic-mode-authentication/
How to determine the Authentication mode of a web application:
http://blogs.msdn.com/b/psssql/archive/2011/02/22/sharepoint-adventures-how-to-identify-if-you-are-using-claims-authentication.aspx
Thus, a possible workaround to get the user name from a User field is that you can use
properties.ListItem["UserField"] which will return same result whatever the authentication mode would be.
Best regards
Patrick Liang
TechNet Community Support -
How can i get the correct text from the url which has the mulitp-languages?
hi, all
i built a application and deployed it on sun application server 8.1. when i request a url which include some multi-languages (for example http://xxx.com/servlet?value=XXX. the 'XXX' may be simply chinese. ), i got the ??? instead of the correct text. how can i do it? in tomcat server, i can set the URIEncoding=GBK to get the correct code in server.xml. how can i do it in sun app server?
thanks.Ok, it is unclear on what is happening here.
Are you saying that when the webclient gets the data that it is not honoring the quote characters? Or the processing of the data buffer is causing issues?
This is what I see the of your example text which is trying to be parse out:
<a onmouseover="EnterContent('ToolTip','תווית על בגד: ’’תן לאישה לכבס. זה תפקידה’’','<u><span style=color:#000099;>כתב: Spook בתאריך: 08.03.15 שעה: 22:11</span></u><br>מחאת טוויטר קמה בעקבות תוויות שוביניסטיות שהדפיסה חברת אופנה באינדונזיה לפיהן תפקיד הכביסה מוטל על האישה. החברה התנצלה אך כנראה רק עשתה רק יותר נזק לע...'); Activate();">";
It appears to me that the escapes `’` does not have matching `“` anywhere within the tooltip. So it appears that the page properly places left quotes in when processing the page, but the raw html has broken text.
Hence a garbage in, garbage out situation.
William Wegerson (www.OmegaCoder.Com)
Maybe you are looking for
-
Hi I purchased a MacBook Pro 15inch iris pro Retina display version (£1599) recently. Can we upgrade tit with Nvidia graphics card? Thanks
-
Post Goods issue using bapi_goodsmvt_create
hi, Iam trying to do post goods issue using bapi_goodsmvt_create. please let me know what are the mandatory fields to be passed?
-
PubSec Digital signatures in Acrobat 9
Hi, i m developing a digital signature plug-in, PubSec, to be specific. My plugin will, hopefully, digitally sign open pdf, and also able to verify them. The signature i am creating will be standard so that any other plugin, including Acrobat's own,
-
Picture/Video message in My Usage
Under "My current usage"... Picture and video messages are being missed alltogether... I have matched texts to the minute but picture/video messages sent to me are being missed entirely in the log for some reason... Also under message type... Im not
-
IPhoto updates from App store.
Would anyone know why iPhoto updates from the App store seem to take ages to load. They always seem quite large in content and for all I know could be replacing the entire iPhoto program.