The cost of a non warrantied

Hello,
im wondering if any one knows if the hard dri've has a failure? Will they replace the hd? Im guessing the cost would be close to what i have paid for the micro

At a guess it will be an expensi've repair, but only Creative can tell you for sure.

Similar Messages

What is the cost of replacing iphone 5(broken screen, out of warranty) with a higher model maybe 5s? In India.

Hi,
Yesterday i dropped my phone and the screen got shattered. The phone is working fine. but the screen is cracked.
After searching through the internet, i found out the following options:
Getting Out-of-warranty Replacement.
Getting the screen repaired by Apple Store.
I am located in India and had bought the phone from India only.
So my questions are?
What is the cost of getting an out-of warranty replacement for iPhone 5?
Can i get a replacement for a higher model of iPhone( maybe 5s or upcoming iPhone 6). If yes, how much extra i'll have to pay?
Is it possible to repair the broken screen in India? if yes, what will be the tentative cost?
Thanks.

ShadowDancer1000 wrote:
All prices in US$.
iPhone 5 screen replacement at an Apple store is ~$120.
The price of getting the screen replaced in the US on the 5 is $150, and it is only available on the US as of now.
iPhone 5 screen replacement at an non-official Apple retailer is $75-90
Should the OP decide to go that route, he will be forfeiting future support from Apple, both in and out of warranty
A new/refurb 16GB iPhone 5 from Apple is ~$400
A used 16GB iPhone 5 on Craigslist or Swappa is ~$275-350
Apple no longer sells the iPhone 5. They keep a number of units on hand for out of warranty service, which is $269 in the US.
Buying from Craiglist (or on-line) is usually risky as the phones turn out to be not what they are advertised as.

My screen cracked, but I haven't had my macbook for a full year yet. Does Apple care or warranty cover the costs of the damage?

My screen cracked, does apple care or warrant cover the costs?

Yes, unless the damage occurred due to an accident. In other words the warranty is applicable only if the crack occurred due to a manufacturing defect.

Can you get a battery replacement at an Apple store while you wait? What would the rough cost be, out of warranty?

Can you get a battery replacement at an Apple store while you wait? What would the rough cost be, out of warranty?

I am not sure what device you are trying to replace the battery on, but usually the battery is at least 30% of the cost of the device from what I have read. Apple likes to keep a monopoly on batteries I think. I have never seen them replace a battery at the store, usually they have to ship it out. You can find batteries for sale online, but you will have to crack the device open yourself.

What is the cost of i pad mini wifi screen replacement with valid warranty

what is the cost of ipad mini+wifi 16 GB SCREEN REPLACEMENT with valid warranty in india??
can anybody help me out??
the i pad mini screen broke when it fell down from about 1 or 2 feet!!! but it is working only the screen has broken and it has many cracks.
please help me out with this . the warranty is valid until 14 december 2014

Unless you have apple care plus (and I'm not sure if it's an option in India) screen breakage is considered accidental damage and not covered by the warranty.
http://www.apple.com/support/ipad/repair/
You should look up repair costs and options for your geographic area.

I'm buying a MBP from a non apple store, do I still have the same "one year limited warranty"? And is it international or not?

I live in Turkey and my father is bying me a Macbook pro from Dubai's airport, and I was wondering if I would still have the same "one year limited warranty" as if I bought it from an apple store in Turkey, and is the one year limited warranty international or not?
So can I return, replace or repaire the laptop in Turkey

If the seller is an Authorized Apple Service Provider, then yes. Otherwise I do not know.
I do not see Dubai listed:
https://locate.apple.com/country
The Apple warranty is world wide.
Ciao.

How much is the cost for replacing iphone 4 display?

how much is the cost for replacing iphone 4 display?

Apple will replace it, and the replacement comes with a 90-day warranty.
There are some legitimate, high quality repair centers that often can fix phones for less than replacement cost and offer at least 90 warranty...
Or maybe the OP knows that the broken display is not covered under warranty, which is why he was asking for the cost, but he still may have a warranty that just wouldn't cover him in this case.
The warranty is all or none. If the phone were damaged so as to void warranty coverage on the display, there is no remaining warranty on the rest of the device.

Can't get help or information about a non-warranty repair. Desperate in Dap

I purchased a zen micro photo on 4/3/06. The very next day, to my horror, I dropped it on a hard floor. Popped right out of the ****ed soft pouch. My old zen micro has been dropped before but I guess that hard case they used to supply did it the power of good! The micro photo is kaput. It powers up but stays on the creative screen and makes a whirring sound for a little while. I have tried the recovery options and none of them work - just hang.
Since Monday 6th of March, I have been trying to get someone at Creative to tell me how I can get this repaired, how much it will cost etc. I had the same problem as the last guy with a shocking phone line to Singapore. Couldn't hear the menu options, chose one that hung up on me. Chose the other and couldn't talk to the operator because of the huge lag. We were just speaking over each other. I have now made a couple more phone calls and tried, in vain I think, to read out my long e-mail address to various operators. My job is to deal with people from other countries so it's not as if I can't understand a singaporean accent - it's just that the phone line is so unbelievably bad. As well as the phone calls, I have sent 3 e-mails. I waited a week each time and have as yet received no response.
I even sent a fax to the Creative Labs in Sydney and it was, of course, ignored. When talking to the person who answers the phone there, I have tried to stress to them that I need the help of someone in Australia (to perhaps get someone in Singapore to address this) but they have not been the least bit interested in helping me.
I'm posting here as a last ditch effort to attract some advice!

Your problem might be that the arm that reads the hard disc is stuck because you dropped it and knocked it out of place and thats why it freezes on the Creative Screen. My player also froze on the Creative screen, but it you give your player a good hard shake while gripped tightly in your hand, also banged against stuff will dislodge the stuck harddri've arm and get it back into place and then your player should say "Rebuilding Library".
I found out this solution on these forums, so try it, it might work.

Implication of changing the Cost center during posting

Hi all,
Due to business reasons, we have unchecked the 'Agree' indicator in the Acct assignment configuration for Asset accounting. Hence, cost center becomes editable during document posting.
We want the cost center to be editable only for ABF1 t-code and for other asset t-codes like acquistion, retirement, scrapping, transfer etc, we want to derieve the cost center from the master data.
Given the situation, I request experts' input on 2 questions -
1. Is it possible to have the cost center editable only in ABF1 and disabled in other AA transactions?
2. If cost center is editable in all the t-codes, what is the implication if the cost center is mismatched with the data available in the master record?
Please provide your inputs.
Thanks in advance.
Regards,
Sridevi

Hi,
The client has many plants, of which only few are running in SAP and the rest non-SAP.
Whenever there is transfer of asset from non-sap plant to SAP implemented plants, we handle the situation as below in the receiver plant-
1. Treat the asset transfer as legacy asset transfer and create asset master record through AS91. Maintain the cummulative acq value and Cummu depn value till the last period in master data.
2. As legacy transfer is not real time integrated with FI, we are doing ABF1 posting to pass manual JV to record APC and Acc depn. posting. At this instance, we want the cost center to be manually keyed in. This is because, we have yet another situation, where we need to have the net book value of the asset at cost center level for our allocation cycles. Hence,
3. But, for other normal AA transactions, it shd automatically derieve from asset master.
Request your suggestion on achieving the above requirement.
Regards,
Sridevi

Purchase Order Field and Cost Center Field Non Editable In F-48

Hi Friends,
I have a cretain requirmnet to make the PO and cost centre field non editable.I tried through shd0 bt it says i can only cretae Transcation variats for Dialiog tran.Please help
Regards,

Hi,
You can speak to your functional people. I think through SPRO "Maintain Field Status Variant' under Financial Accounting ->........
we can control this.

My iPhone 6 plus screen was crashed, how much is the cost if I want to repair it at Apple? FYI: I didn't bought Applecare

My iPhone 6 plus screen was crashed, how much is the cost if I want to repair it at Apple? FYI: I didn't bought Applecare+. I bought my iPhone 6 plus 3 months ago in Singapore.

$129 US. https://www.apple.com/support/iphone/repair/screen-damage/ For local pricing call your nearest Apple store. If you live somewhere other than Singapore you'll have to send the phone to someone you trust in Singapore and have them take the phone in to have it repaired. iPhone's do not have an international warranty and can only be serviced in the country they were purchased.

What is the cost and process for factory refurbish of a tx2-1375dx with a blown system board?cc=us

What is the cost and process for factory refurbish of a tx2-1375dx with a blown system board?
How would one go about arranging for such service?
Why is it impossible to contact a real human for support, either via online chat or phone?

Last I checked I am a real human, it is just that I do not work for HP and can't speak for them. HP would not be the place I would go for a "refurbish" job. They charge an arm and a leg for out of warranty service. You simply need to find someone to replace the system board (motherboard). It is also very likely on that model that you could have your system board repaired. There are many services on ebay that will repair the motherboard at the component level. The cost would be at or under $100 or so. I have more advice to give but many times I write a detailed response only to have the user never come back. I do check my posts so if you want more ideas just please respond. The tx2-1000 was one of the models affected by the nVidia issue that caused so many HP laptops made in the 2007-2009 era to fail prematurely.

Explain about the cost, bytes & cardinality calculation in oracle9i

Hi All,
Any one can explain about the cost, bytes & cardinality calculation in oracle 9i.
Actually I want to understand the behaviour of execution plan taken by oracle.
Here is one example.
Execution Plan
0 SELECT STATEMENT Optimizer=CHOOSE (Cost=51 Card=1 Bytes=424)
1 0 SORT (GROUP BY) (Cost=51 Card=1 Bytes=424)
2 1 TABLE ACCESS (BY INDEX ROWID) OF 'NBFC_ADDRESS_M'
3 2 NESTED LOOPS (Cost=43 Card=1 Bytes=424)
4 3 NESTED LOOPS (Cost=43 Card=1 Bytes=350)
5 4 NESTED LOOPS (Cost=43 Card=1 Bytes=296)
6 5 NESTED LOOPS (Cost=40 Card=1 Bytes=242)
7 6 NESTED LOOPS (Cost=15 Card=1 Bytes=193)
8 7 NESTED LOOPS (Cost=13 Card=1 Bytes=164)
9 8 NESTED LOOPS (Cost=10 Card=1 Bytes=138)
10 9 NESTED LOOPS (Cost=9 Card=1 Bytes=125)
11 10 NESTED LOOPS (Cost=7 Card=1 Bytes=57)
12 11 TABLE ACCESS (BY INDEX ROWID) OF 'NBFC_BRANCH_M' (Cost=2 Card=1 Bytes=20)
13 12 INDEX (UNIQUE SCAN) OF 'NBFC_BRANCH_M_PK' (UNIQUE) (Cost=1 Card=1)
14 11 TABLE ACCESS (BY INDEX ROWID) OF 'CS_ALLOCATION_HDR' (Cost=5 Card=1 Bytes=37)
15 14 INDEX (RANGE SCAN) OF 'CS_ALLOCATION_QUEING' (NON-UNIQUE) (Cost=2 Card=2)
16 10 TABLE ACCESS (BY INDEX ROWID) OF 'LEA_AGREEMENT_DTL' (Cost=2 Card=1 Bytes=68)
17 16 INDEX (UNIQUE SCAN) OF 'LEA_AGREEMENT_DTL_UQ' (UNIQUE) (Cost=1 Card=1)
18 9 INDEX (UNIQUE SCAN) OF 'SYS_C0016578' (UNIQUE) (Cost=1 Card=1 Bytes=13)
19 8 TABLE ACCESS (BY INDEX ROWID) OF 'LEA_ASSET_M' (Cost=3 Card=1 Bytes=26)
20 19 INDEX (RANGE SCAN) OF 'LEA_ASSET_M_CDX1'(NON-UNIQUE) (Cost=2 Card=1)
21 7 TABLE ACCESS (BY INDEX ROWID) OF 'NBFC_CUSTOMER_M' (Cost=2 Card=1 Bytes=29)
22 21 INDEX (UNIQUE SCAN) OF 'NBFC_CUSTOMER_M_PK' (UNIQUE) (Cost=1 Card=1)
23 6 TABLE ACCESS (BY INDEX ROWID) OF 'NBFC_CHEQUE_DTL' (Cost=25 Card=1 Bytes=49)
24 23 INDEX (RANGE SCAN) OF 'NBFC_CHEQUE_DTL_IDX1'(NON-UNIQUE) (Cost=3 Card=23)
25 5 TABLE ACCESS (BY INDEX ROWID) OF 'NBFC_ADDRESS_M' (Cost=3 Card=1 Bytes=54)
26 25 INDEX (RANGE SCAN) OF 'UK_BPID_BPTYPE_ADDTYPE'(NON-UNIQUE) (Cost=2 Card=1)
27 4 TABLE ACCESS (BY INDEX ROWID) OF 'NBFC_ADDRESS_M'
28 27 INDEX (RANGE SCAN) OF 'NBFC_ADDRESS_M_CDX1' (NON-UNIQUE) (Cost=2 Card=2)
29 3 INDEX (RANGE SCAN) OF 'NBFC_ADDRESS_M_CDX1' (NON-UNIQUE) (Cost=2 Card=2)
Statistics
1 recursive calls
0 db block gets
117 consistent gets
108 physical reads
0 redo size
2181 bytes sent via SQL*Net to client
1185 bytes received via SQL*Net from client
1 SQL*Net roundtrips to/from client
1 sorts (memory)
0 sorts (disk)
0 rows processed
Actully I don't know how to post the thread in proper format so example is not formatted.
Thanx.. Ratan

Cardinality is the number of rows.
Cost -- think that is relative.
Bytes -- the amount of data?
Tom Kyte has a really nice explanation of this in Effective Oracle by Design -- but I left it at work.

Change in the cost center group

Hi,
Can we change the cost center from one cost center group to another group, when there are some postings in the cost center? If yes, how to go about it?
help me out

Yes you can!
If you are planning to change within the standard hierarchy, Goto OKEON, drag, drop and save.
Or you can go to KS02 for the cost center, in the basic data, you can give the new cost center group under the hierarchy area.
If it is just non hierarchy cost center group, then go to KSH2 enter the old group, select the cost center, delete save, then go to the new cost center group and include the cost center.
It does not matter whether it has been posted or not. It is just a grouping. But caution must be exercised. and there shall be a valid justification for doing so. Because the cost center may be used in various cycles. So better to check where and all the cost center is being used and then do the change.

How difficult can BT make it to find the cost of a...

I wanted to find out how much it was going to cost me to phone my garage, which has a number 08433 08 02 86.
How difficult can that be? Google does not know. BT search does not know. ON about my 5th attempt I found a link that took me to the BT pricing download section. There must be a hundred downloadable zip files. The one I tried had 1001 (yes, one thousand and one) files in it - htm and pdf. I had to guess as they had names like FrameworkIMP8745874574.htm
Could not find anything that made any sense, so I went back to searching the web site..
I thought I finally had a solution, which linked me to http://www.bt.com/pricing/current/Call_Charges_boo/1632_d0e5.htm#1632-d0e5 which is a page where I had to go to more pages. In the end, it required me to look up 3 different pages to find out how much a call to a number 08433 08 02 86 would actually cost.
Do you realise just how many different tariffs there are for all of the different numbers? I had thought 084 was a local number, but it seems 08 is just a non-geographic and specialist code that could cost almost anything. The price lists are updated constantly, so if you did download a copy, it would be out of date very soon.
I am appalled that BT don't have a quick way of searching for the cost of a call. Clearly they can do it very quickly in the billing software. Why do they make it so difficult to find the information for a normal residential user? Is this not what databases are for? Surely I should be able to go to a page that allows me to ask the question "How much will it cost me to call the following number?"
08433 08 02 86

That is nearly how I eventually found it. But it was far from easy to find, and it is extremely difficult to use.
Initially I found http://www.bt.com/pricing/index.htm but for goodness sake, it is just incomprehensible at first sight, and second.
To find 08 numbers other than 0845 and 0870, you have to scroll down to
Section 2:Call Charges & Exchange Line Services
then find
Part 13:National and International Number Group Codes Used for Specialised Services - 08xx Numbers
As you say ,
http://www.bt.com/pricing/current/Call_Charges_boo/1632_d0e5.htm#1632-d0e5
There are different sections in the left hand frame of that page that give other numbers
I found instead of your pdf, which is a big download that goes out of date, you need this web page for charges:
http://www.bt.com/pricing/current/Call_Charges_boo/0016_d0e5.htm#0016-d0e
and tehn as each line on the first web page gives a discount code, you need this page for hte discounts.
http://www.bt.com/pricing/current/Call_Charges_boo/1632_d0e48078.htm
Now can someone tell me that this is an easy way to do it?

The cost of a non warrantied

Similar Messages

Maybe you are looking for