The CPU fan starts with the case switch on and the system stops after 2 seconds

Hi,
I have just bought the MSI K8N Neo FSR (MS 7030) to build a new computer with (amongst others) an Athlon 64 3000 processor and an Enermax 3051 case.
The CPU fan starts when I switch on the power with the switch on the back of the case, but stops after two seconds. I don't get anything when I push the Start button of the case.
At the beginning I got some feeble orange light on the D-bracket LEDs. Now, there is nothing at all.
I have tried to do a CMOS and also to put the Mobo out of the case after having disconnected the HD, the DVD reader, the floppy disk reader and all the Front panel connectors ===> nothing changed.
The Power capacity of my case is 300 watts. I had computed on Power Supply Wattage Calculator (http://www.jscustompcs.com/power_supply/Power_Supply_Calculator.php?cmd=AMD) that it is quite sufficient for my system.
Other materials on my system: the MSI FX5200-T and a PQI RAM PC 3200 which worked well on a former MSI Mobo (K7N2 Delta). I don't intend to keep this RAM on my new system but I use it to test it, before installing the Corsair Value which are on the system with which I write this post.
Thank you in advance for your help.

Finally, it appears that I had damaged the motherboard and the CPU.
When I installed the CPU, I hesitated because the User's guide said that "the gold arrow should point towards the lever pivot", whereas the illustration and the AMD's one pointed towards the opposite corner. I had finally made the good choice (that of the illustrations), but I have certainly displaced some pins of the processor while hesitating.
The shopper told me that MSI will never agree that its text had troubled me and refused to give me a new motherboard.
I have finally bought an ASUS motherboard and, as I was fed up with the computer building, I paid a technician to do this job.
I would like to mention two other mistakes in the MSI K8N Neo User's guide:
- it devoted one page to the installation of the retention mechanism which was already installed.
- there was no explanation about the mention of two "Power LED" connectors.
I acknowledge that I have been stupid, since I should have asked the question of the direction of the golden arrow in a forum, where I would have found very quckly the right answer to my hesitation.
However, I am revolted that MSI does not acknowledge that a grave mistake and two troubling omissions in the User's Guide can lead novice people to grave failures.
I'll never more have confidence in a company that make such mistakes and does not assume its responsibility.
Once again, thank you for your help.

Similar Messages

When I take my phone off charge in the morning I get an info box on the front which has the sound trumpet icon with a line through it and the word Mute. The only way to get rid of it is to reboot the phone any ideas as to how I can stop this happening?

When I take my phone off charge in the morning I get an info box on the front which has the sound trumpet icon with a line through it and the word Mute. The only way to get rid of it is to reboot the phone any ideas as to how I can stop this happening?

Hello cor-el, thanks for your reply. I changed my settings for downloads to desktop and it has appeared on there. When I double click I am asked which program I want to open file. I click firefox and another box "opening install" says I have chosen to open the file which is an application and do I want to save it. This is the only real option so I press save file. I get a box saying this is an executable file which may contain viruses - do you want to run. I press ok and the final box showing C drive file name and desktop appears stating application not found.
This happens the same whenever I try to install.
To my untrained eye the application is not being recognised as an application and I cannot work out how to get it to do that.
My plugin is still showing as out of date.
Is there anything you could suggest. Thanks for your time.

HT1937 e phone. I am unable to use the phone in india with any service provider here and the message when i insert a valid sim is 'invalid sim please contact your service provider'.

hi, i purchased 4S at paris (sfr) and got back to india without deblocking the phone. how to activate the phone in india ? Till date it has not been possible. Need assistance
thanks
unnikrishnan

That's because it's carrier locked. Only the carrier it's locked to can authorize unlocking it. Contact them.
Why did you buy a carrier locked phone?

What is the cpu fan part no for dv6 2060ea

what is the cpu fan part no for dv6 2060ea

Hi
Please find the web link given below check the part number under page 4-39 Removal and replacement procedures will let you know how to replace the part and the part number as well.
http://h10032.www1.hp.com/ctg/Manual/c01860375.pdf
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

How to get name of class that the JVM was started with ?

Assume I have class foo with the standard main method.
I also have classes ding and dong, they extend foo.
The JVM is started with either ding or dong as the 'main' class. Since neither ding nor dong directly implement main, the actual main method being executed is foo's.
In the main method of foo I want to construct an instance of either ding or dong, depending on which the JVM was started with. Since I'm in a static context, I can't do anything with 'this'. Is there another way to get the name of the 'main' class from the JVM so that I can construct an instance of it ?

The idea behind all of this is that the developer of
Ding and Dong should not have to know anything about
foo, in particular it's constructors. But if Ding and Dong are subclasses of Foo, then developers must know about Foo. If you expect developers to extend a framework without having a well-defined interface to that framework, you are probably heading for trouble.
To be able to
privatize the constructors, construction of the
concrete class has to take place in foo.If Ding and Dong are subclasses of Foo, then you can not make all of Foo's constructors private.
Of course I could have a method in Ding and Dong that
calls a static method in foo into which the Ding and
Dong instance pass their class, but then I'd have
identical implementations of this method in Ding and
Dong. Yes you would (well, not identical, but very similar). Like I said, you could do this programmatically with AOP, or you could probably do it dirtily using stack traces (though with it being a single hit at startup, you might not consider it being quite so dirty).
But: the point of inheritance is that common
functionality goes into superclasses. I disagree. The important thing about inheritance is that classes share an interface, and that methods can be polymorphically inherited, allowing new functionality to be 'plugged in' in the future, and even at runtime.
Also, in
general one wouldn't make methods static if a class
reference is needed (or one would make it an
argument), but Sun didn't consult me when they
designed the main method :-(I still don't see why you need to do what you want to do. It appears that all you are after is the ability to start your program using a command line like
    java com.mypackage.Ding
instead of
    java com.mypackage.Foo com.mypackage.Ding
or
    java com.mypackage.Foo Ding.properties
or something else along these lines.
Since you must know the name of the class you want to use at the time you want to use it, why can't you just pass the name as an argument, or start up using some properties file, or a shell script?

HP PRO 3400 Series desktop won't boot CPU fan starts and stops , no video, no beeps

I have the above computer with an i3-2125 CPU, Windows 7 Home Premium 64 bit, and a 300GB Seagate Hard drive. I've had it for about 2 years and been working fine. It started acting up about 2 months ago. It would lose the date and time. I checked the battery, and it was OK, so I kept using the computer. Then on 9/15/2014 it hung on "Starting Windows", I did the following:
1. Ran the built in HP diagnostic on hard drive and memory and they both passed.
2. Tried to go to last known good configuration and nothing happened.
3. Noticed the date and time were off, replaced the battery, nothing changed.
4. Tried another hard drive from another HP PRO 3400 Series and it would boot up but could not set date in bios.
5. Tried all kinds of things but could not set date in bios.
      a. Bios date read 48/00/0048 after removing and replacing battery.
      b, Tried to reset date to 9/16/2914 and it gets 56/00/0051
6. Then it wouldn't boot at all.   So now when you turn on the power, the CPU fan starts and runs for about 1 second, then shuts off for 4 seconds, then starts and runs for another 1 sec and it does this continuously. There is  no video and no beeps and no difference when all memory is removed.
7. I removed the power supply, and checked voltages. It appears to be OK.
8. I removed the motherboard, and inspected it- saw nothing obvious.
9. I connected the power supply to the motherboard with nothing else connected to the motherboard, and I get the same thing. CPU fan starts then stops continuously, no video no beeps.
10. I am thinking it is the Motherboard, but I sure could use some suggestions as to what to do next.
Thanks
Maxgle from CA

Maxgle, welcome to the forum.
I believe that you would get more responses to your problem if you start a thread here. They are the members who know your computer best.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Problem with PM8PM-IL and the CPU fan

Hello everybody i am spanish my apologies for my english xD
I have a motherboard MSI PM8PM-IL (MS-7222), official intel fan with four connectors,the fan support PWM but the motherboard doesnt control the rpm of the fan and I have 3668 rpm 53 °C (127 °F)
From the manual "you must use a specially designed fan with speed sensor to take advantage of the CPU fan control."
In the bios i don't see that option "H/W Monitor This entry shows the status of your CPU, fan, warning for overall system status."
"CPU Smart Fan Temperature"
the manual have photos of this menus but when i enter in the bios i don't see anything of that
msi.com/product/mb/PM8PM-IL--L.html

You appear to have some Beta test version of the 1.2 BIOS.
Try flashing to the last version 1.3:
http://eu.msi.com/product/mb/PM8PM-IL--L.html#/?div=BIOS
>>Use the MSI HQ Forum USB flasher<<
However, its possible that your board simply doesn't support this feature, and the manual is incorrect.

Capitalization doesn't work as described. One can start with lower case and change to upper, but changing from upper case to any of the other options doesn't work. Is there a way around this or is this just a glitch that needs fixing?

In Pages capitalization doesn't work as described. One can start with lower case and change to upper, but changing from upper case to any of the other options doesn't work. Is there a way around this or is this just a glitch that needs fixing?

I think it does work as described, but the description is not very complete. Capitalization does not change any of the characters that you type; what it does is allow some of the lower case characters to display as capitals. If you copy the result and paste it as plain text, you'll see that the lower case characters are still there. It doesn't actually say anywhere that it can make capitals display as lower case, and it can't.
The obvious way around this is to actually type what you want.
The more powerful way is to install WordService from Devon Technologies which adds the functionality of Pages' capitalization menu as well a lot of other ones. WordService actually changes the character to the one displayed, and it works in most of the applications on your Mac.

I'm getting a Plugged in, not charging message after replacing the CPU fan

I just replaced the CPU fan on this notebook last night and finished it today. Its running perfectly at the moment.
The problem is the windows Task bar on my desktop says "Plugged in, not charging" when I mouse over the battery indicator there. I've tried many things to fix it, from uninstalling or disabling the drivers for the devices involved (the ACPI battery and AC adapter) under Windows' device manager, to swapping out with my spare battery.
I've also switched power plans on the off chance that could have been causing some kind of battery charging setting. This did not fix it. The AC adapter works. I've been running this notebook for about two hours now searching for a solution, it just won't charge the battery. I've not tried observed it enough but I believe it will charge while powered off, but not while on. The orange LED indicator by the AC adapter port glows when the machine is off, indicating that it is charging.
I have a feeling the whole "uninstall device drivers for the battery devices" idea is a thing of the past. Everything I found which suggested doing that also mentioned Windows Vista, which at this point in time is a relic (July 2015). When I was replacing the CPU fan, it did get frustrating at times but everything is intact apart from some case clips and a few other plastic case parts. I have reason to believe everything is connected too because its still powered on, meaning its getting power, but it isn't going in to the battery.
Symptom summary:
Batteries: OKAC Adapter: OK
MOBO: PROBABLY OK
ME: NOT OK xD

Hey srkv121,
welcome to the forums
On
1. Optimized battery run time, the energy managment completely charges the battery to ensure maximum battery performance
2. On best battery health, energy management charges only 50% of the battery, it ensures maximum battery life but not performance
hope this helps
regards
Lets make 2015 the year of the #DO
Did I or someone help you today? Press the star on the left to thank them with a Kudo!

What is the correct way of quieting down the CPU fan?

Hello,
Let me first ask for recomendations on an aftermarket CPU Heatsink and Fan to replace the stock one on my AMD x4 965 Black edition CPU please, My profile on this forum has my computers equipment and case etc. But if you need more info please just ask..
Would somebody please give me instructions on how to make the stock CPU cooling fan run at a more appropriate RPM when at idle and or when running with a load on it please.
The stock CPU cooling fan usually runs up there at about 5,000 to 5,500 CPM even when at idle and it's seriously insanely loud, too loud to be sitting next to it and trying to concentrate on work or even playing a game.
I've been loading up the Overclockers Center program and choosing the default profile since that seems to have the CPU fan set to around 3500 RPM which produces an acceptable noise level for the fan. But I figure that having to load up Overclockers Center program and choosing a profile each time I load my computer is probably not the way I should be doing it, so if somebody wouldn't mind, please explain what I need to set in the Bios or elsewhere so that the CPU cooling fan is not blowing my head off with noise all the time.
Thanks

Hello
1-This mobo is strong enough to support such a heavy coolers.Now i have i installed TUNIQ TOWER EXTREM( because of porformance/price here) that is as heavy as v8. although the company dosnt gauranty the failure but it works very well on my case and i rotate and opening the case many times for some experiments!!
2- ZALMAN is a famous cooler producer.I said the rules for choosing a cooler . You can buy one of them .The reviews on net can help you for best choise.BUt v8 is a good proven cooler because the more surface that has and material and big fan.although i didnt have another choice in IRAN.You may find so better coolers.
the fluid mechanic rules say that the surface-material-shape of heat sinks and temperature-velocity-amount of air that moves on the heat sinks are the parameters of a heat sink.
i have a bad experience.In my old case with P4 3 GHZ i bought a good cooler from THERMALTAKE .But the fans is rotating very much and made noise. There was some truth that i didnt mentioned.
The cpu is produce a lot of heat ( more than phenom) and the fan is 10 cmm i think . I replaced the fan with a 12 cmm fan but the system in loads crashed. The heat sink designed for such a fan and it must rotate very much to cool cpu .12 cm fans cant go beyond 2000 rpm i think and this amount of air wasnt enough for cooling.
3- you have a lot of wind in your case!!. I dont know that greater fan than 12 cm is safe because they use more current .But 8 and 12 cm fans works very well with onboard ports and SPEEDFAN program.
After all cooling and making the pc make less noise is a long story .You must have a target . There is a limit that you cant go beyond that so i think you must have a plan and use your money and time on it.
For my new system i had a dream: most powerful-silent-upgradable system so i choosed these parts:
POWER=CM SILENT PRO- for the design and big fan that they have.
CPU=ATHLON II 635 -I knew that phenom is very powerful but make more heat so i used this cpu and have plan for upgrading with a 6 core cpu.
VGA= 1-GIGABYTE 9800GT SILENT
2-ZOTAC 9800GT SYNERGY
choosing a gpu was very hard. 9800gt silent was the most powerful silent cpu that i could buy. but for future i bought a zotac. because it has a single cooler and dosnt occupy a PCI slot that i need.
you may say why you dont buy another 9800 silent? because this card is warm in loads and i had a fear two of them in a case may harm them. I count on HYBRID SLI technology that could shut down the second card but it is not working and i am a little disappoint .
two 9800gt in sli have as power as a GTS 270 in reviews.
CPU COOLER=TUNIQ TOWER EXTREM- According to my counts cooler was silent in ideal but in loads it was noisy so i replaced that
MOBO=NF980-G65-It uses the last chipset from nvidia with sli enabled and ddr3 and phenomii x6 support. (The mobo is hot. According to some reviews it is cooler than AMD chipset motherboards and faster but i hope it was cooler)
Good luck

What temp for the CPU fan is dangerous

I have a HP Pavilion P6404y which occasionally the screen goes black. It appears that my computer is still running as the on light is still on, but when I hold down on the start button to shut the computer off it shuts off and when I turn it back on my screen is working again. I was thinking that maybe my computer is getting a little hot and was wondering what temp is hazardous for the CPU Fan. I download some software and it states when using my computer that the temp is almost 60C.

Your near the 62C max: http://www.overclockersclub.com/reviews/phenomii940/
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

How can i sort PDF's on IBook with the name that starting with numbers

i import a number of pdf's representing ameeting agenda as the files names (1xxx,1.1xxxx, 2.xxxx,10.xxxx) on ibook , however the files sorted on a diffrent way as file start with 10 on first . so how can i sor the files on the IBook with its name starting with numbers as1 &1.1 and so on.

You seem to want a numeric sort but are getting a character sort.
a number range would be 0,1,2,3, ... 9,10,11 ...
sorting like everything else with computers is an algorithm. Someone needs to define how it works. When you see a list of files, someone has defined how the list will be sorted. If you compare Windows file sorting to Mac files sorting you will find there are differences.
In the case of files sorting, the files are sorted on characters from left to right. In file sorting the sorting algorithm does not try to determine that files are numbers. All files beginning with a 1 will be sorted together becuase the file sorting althorithm doesn't look at the second character position before grouping all the 1's together.
For what it is worth, there are multple books written on sorting.
Robert

Since I upgraded to IOS 7.0.2, many times I am unable to answer the calls. Then I have to switch off and on to answer the calls. I checked with my three friends who updated and they are also facing same problem. Kindly let me know the solution.

Since I upgraded to IOS 7.0.2, many times I am unable to answer the calls. Then I have to switch off and on to answer the calls. I checked with my three friends who updated and they are also facing same problem. Kindly let me know the solution.

Since other millions of people updated and do not have that problem - it means one of two.
1.Your friends lied to you and do not have that problem and in that case only your installation of ios7 got corrupted and you need to restore your phone.
2.Your friends didn't lie to you and all 4 of you need to restore phones (that way reinstalling ios 7 properly)
here are instructions for restore and you may have to backup before restore.
iTunes: Restoring iOS software - Support - Apple

The package name The Gallbladder-4.itmsp contains an invalid character(s). The valid characters are: A-Z, a-z, 0-9, dash, period, underscore, but the name cannot start with a dash, period, or underscore

I have an iBook on itunes and I am trying to upload a new version of the book. I am following the workflow through iBooks Author and when I fell out all of the infromation for the package on iTunes producer i then hit the deliver button and I get the following error message:
The package name The Gallbladder-4.itmsp contains an invalid character(s). The valid characters are: A-Z, a-z, 0-9, dash, period, underscore, but the name cannot start with a dash, period, or underscore.
As far as I can tell the file that is being referenced does not meet the criteria axpressed in the erro message and in fact that file has been created by iBooks Author so one would think there shouldnt be an error.
I also get the following to error messages:
Apple's web service operation was not successful
Unable to authenticate the package: The Gallbladder-4.itmsp
Would ove any help.
Thanks,
Jeff

Thank you so much for your help.
For anyone that would like to check out this book it can be downloaded at:
https://itunes.apple.com/us/book/the-gallbladder/id598317335?ls=1
Please check out our free medical education blog by Jeffrey Eakin using iBooks Author at:
http://free-medical-education-ibooks-author.blogspot.com

Safari cannot open the specified address as OS X does not recognise the internet address starting with "aam". Please please can someone shed some light on this, its driving me MAD!!!

when i try to download the software onto my mac, i receive a message saying that safari cannot open the specified address as OS X does not recognise the internet address starting with "aam". Please please can someone shed some light on this, its driving me MAD!!!

Try and download the Desktop Application First before trying to install any other Adobe Product. The link for AAM is Safari looking for Desktop Application in your machine.
Creative Cloud Help | Creative Cloud for desktop

The CPU fan starts with the case switch on and the system stops after 2 seconds

Similar Messages

Maybe you are looking for