The CPU utilization is 0% for the other remaining processes when multi threading is used

I am new to AE ,so I am trying to render a project enabling multi threading process the additional processes are present but their utilization is 0% .
I want to juice out every single CPU utiliaztion .
ANy help is greatly appriciated,.
My system specs:
AMD 9690 4.7 Ghz 8 core
32 GB DDR3
C:\256 GB Solid Satte Raid 0
GeForce 780 Ti DDR5 3GB

It is very tempting to try and use all of your system resources and multiprocessing for all your projects, but this is not the way After Effects works. Many third-party plug-ins, many codecs, and many operations do not respond well to multiprocessing. All it takes is one process in your entire thread that is not MP aware to foul the whole thing and give you longer render times.
You are also leaving zero processors for the rest of your computer. Not a wise idea.
After effects renders one frame at a time. One HD frame even with multiple layers of pixel processing just isn't that much data. It does take a while to do the calculations, but expecting to have every one of your CPUs jacked up at 100% to render a single frame of video is expecting an awful lot.
I would suggest that you read up on optimizing After Effects for your computer. Do not expect to be able to utilize 100% of your system resources at all times. That's just not the way processing video on a pixel by pixel basis works.
Just a little FYI,  for 99% of my projects in After Effects I have render multiple frames simultaneously turned off. It just doesn't work with most of the things I do. Sorry for the disappointment.

Similar Messages

  • Can't get the CPU utilization above 52%

    Hi all,
    I have an Intel i7 950 CPU based PC with Windows 10 TP on it which, no matter what, I cannot bring to 100% CPU utilization. While taking the attached screenshot, I was running prime95.exe.
    I have tested the same scenario on the same computer running Windows 8/8.1 and got the same result. However, when doing the same thing under Windows 7, CPU utilization went up to 100%.
    Anybody has any idea why this happens? Is it a different default setting somewhere (probably in registry)?
    Since I have this fast machine I would like to be able to use it at its full strength - the way things are now, my old Quad core 2 GHz PC is MUCH faster than this 8 core 3 GHz one (as I measured in several tests consisting of transcoding videos).
    Thanks for any pointers!

    Hi VikTak-9b,
    How did you get the CPU utilization information ?Are you getting the information from the task manager ?
    "I have tested the same scenario on the same computer running Windows 8/8.1 and got the same result. However, when doing the same thing under Windows 7, CPU utilization went up to 100%.
    Anybody has any idea why this happens? Is it a different default setting somewhere (probably in registry)?"
    I am a little confused here .According to my understanding ,the number is smaller the performance of the machine is higher when the other conditions are the same .
    Here is a link may be useful for us to understand the CPU Utilization for Performance Analysis
    Interpreting CPU Utilization for Performance Analysis
    http://blogs.technet.com/b/winserverperformance/archive/2009/08/06/interpreting-cpu-utilization-for-performance-analysis.aspx
    Best regards
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Which Performance Counter tells the CPU Utilization

    Hi,
    I am new to Performance testing and wanted to know, Which Performance Counter tells the CPU Utilization of any Application hosted on Win 2K8 server. Request you to explain in details how to achieve this ?
    Thanks, Anoop Singh

    this will help you understand for sure
    http://social.technet.microsoft.com/wiki/contents/articles/12984.understanding-processor-processor-time-and-process-processor-time.aspx
    Understanding Processor (% Processor Time) and Process (%Processor Time)
    Sanket. J Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Determine the CPU utilization

    Guys,
    I've been asked to determine the CPU utilization for the execution of my procedure performing a large ETL operation. (in an unix box)
    Could someone help me out?..Is there an oracle query with which I can find the detail?
    Thanks guys!!!
    Regards,
    Bhagat

    Compare CPU statistics before and after proc execution. They are measured in 10s of milliseconds.
    select sn.name, ms.value
    from v$sesstat ms, v$statname sn
    where ms.statistic# = sn.statistic#
      and upper(sn.name) like '%CPU%'
      and ms.sid = [proc session SID]Regards,
    Dima
    Edited by: DimaCit on Sep 5, 2008 11:14 AM

  • What is the cpu fan part no for dv6 2060ea

    what is the cpu fan part no for dv6 2060ea

    Hi
    Please find the web link given below check the part number under page 4-39 Removal and replacement procedures will let you know how to replace the part and the part number as well.
    http://h10032.www1.hp.com/ctg/Manual/c01860375.pdf
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Is there any Vi for getting the CPU and Memory usage of the Local as well as Remote System

    Is there any Vi for getting the CPU and Memory usage of the Local as well as Remote System

    Find the attachment(LV8.5) for local machines. 
    You can use shared variables to monitor the remote machine's usage.
    Attachments:
    Task Monitor 85.vi ‏25 KB

  • Finding the CPU Utilization of a client.

    I am doing a ptoject in grid computing.
    Here one server connects to several clients simultaneously using multithreading concept.
    I have to determine the CPU Usage of each of the clients connected to the server. Can anyone suggest the source code for that?

    java.lang.management.ThreadMXBean has methods for getting CPU time of a thread. Exists in JDK 1.5 and upwards. May not be supported in all operating systems / JVM's, write a quick test first to see if your system supports it. Google might find examples.

  • How to find the CPU utilization from the portal front end

    HI Guys,
      I want to find the CPU utilization from the portal front end browser screen.Can you please let me know how to find this and also the path to find it.
    And how to find the CPU utilization from the server.What is the command to find the CPU utilization at unix level.
    Regards,
    Krishnam.

    hi you can create transient field in view object indicate to visibility of row (boolean ) and create view criteria that show only rows that are able to be visible according to transient attribute and at the update process set the attribute to true inside entityImpl class

  • I get the error message in QuickTime "operation stopped the operation is not supported for this media" most times when I try and export an .AVI file as something else (.m4v). I have not touched the file in any way (no trimming, clipping or other editing)

    I get the error message in QuickTime "operation stopped the operation is not supported for this media" most times when I try and export an .AVI file as something else (e.g. .m4v). I have not touched the file in any way (no trimming, clipping or other editing), all I want QuickTime to do is export the file in a compressed format. Bizzarely, if I shutdown and open QuickTime many times I can occasionally export a clip as another format (maybe one in 10 times). I have seen that other users have had a similar problem after clipping files in QuickTime but this seems to be a slightly different bug in that all I do is open the file and then try and export the file as is - either way, this is a very annoying bug

    @Z_B-B, thank you for taking the time to respond to my cry for help. However, the link you supplied does not address the problem: I am not trying to export from Final Cut Pro to QuickTime, I am trying to export from QuickTime to the rest of the world (like people's iPhones and Ipads) in .m4v format (so I am not emailing my freinds such huge files).
    If I were to spend hundreds of Dollars on a copy of Final Pro I could export directly from there and not have to bother with QuickTime, but I do not take enough video clips to justify the cost. I must say that I never had any of these problems before I decided to switch from Snow Leopard to Mountai Lion.

  • Hello, I'm using Mountain Lion and mail does not leave the mails on the server, either on iCloud nor on other suppliers (orange). They are both using iMap protocol... Any place where I could change this ? Thanks for any hall; Christian

    Hello, I'm using Mountain Lion and mail does not leave the mails on the server, either on iCloud nor on other suppliers (orange). They are both using iMap protocol... Any place where I could change this ? Thanks for any hall; Christian

    Under what circumstances does mail "not leave the mails on the server"?
    If you mean that you delete them (or move them out of the inbox) on one device and then find them not in the inbox on the server when you look from another device, that's how IMAP is supposed to work. (Note that the deletion or moving might be the result of rules you have set up in Mail.)
    If you mean something else, please explain your issue in more detail.

  • HT201441 I buy may iPhone 5 from the UK store ,, It s A new one and no one has used it before ,, the problem that it asked for an other apple ID !!! ,, my order for my iPhone is here in the UK store .. what should i do now ????     ,,, help me please

    I buy may iPhone 5 from the UK store ,, It s A new one and no one has used it before ,, the problem that it asked for an other apple ID !!! ,, my order for my iPhone is here in the UK store .. what should i do now ????     ,,, help me please

    Take it back and ask for a refund or a replacement.

  • My 3 year-old macbook pro is very slow. I have run disk utility and virus scan with no improvement. The "beach ball" will spin for minutes at a time when opening, closing or changing windows. Apple Store looked at it a few months ago with no help.

    my 3 year-old macbook pro is very slow. I have run disk utility and virus scan with no improvement. The "beach ball" will spin for minutes at a time when opening, closing or changing windows. Apple Store looked at it a few months ago with no help. What can I do?

    Under CPU: 3.5% user; 5% system; 91% idle; 441 threads; 90 processes.
    Under System: out of 2GB - 54.7MB free; 530MB wired; 603MB active; 862MB inactive; 1.95GB used.
    Is too much of the system memory tied up? If so, what can I do to free some up?

  • I have a new email address and my old email keeps coming up on icloud when trying to update apps and i don't know the password or security questions for the old email. I can sign in with my apple id which is tied to another email but not itunes how to fix

    I have an apple id and it has my current email attached to it. however when i go to update apps it's asking for the password for an old email. I no longer have the old email and can't use it. when I go to icloud on my ipad it asks for the password for old email. it doesn't allow me to change the old email to current. when i go to reset it i can't remember the password or security questions for the old email so it doesn't let me go any further. How do I fix this? Do i need to call apple support?

    I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
    The old email address no longer exists - I haven't used it in a year probably and I no longer have the account.  I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there.  On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back.  Every 2 seconds I am asked to log in using the old non-existent email.  The device is currently useless.
    The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
    Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

  • When I open my iPad the page is too big for the screen and won't shrink down. The keypad has also become very 'sticky'

    Recently when I open any apps the pages are too big for the screen. They shrink when pinched but immediately become bigger again. It's very difficult to scroll too. The keypad has become very sticky. Missing letters and spaces when I type and needing to tap the keys much harder than usual

    I have the exact same problem, I think.  I was on my iPad 3's home page swiping R-L to locate a certain icon when all of a sudden the screen appeared to get HUGE.  So big I could only see one or two icons.  I couldn't even turn it off to try a reboot because after I pushed the sleep/wake button, I couldn't find the red slide bar.  I finally just had to wait for the battery to die, then recharge it, and it looked normal again.  I also spoke with several friends who haven either iPads or iPhones, and they've all had this happen to them.  I checked my accessibility settings, and Zoom was already off.  So what is causing this problem for so many people, and what can we do to prevent it?  Please help.

  • I have ad Apple ID on my iPad , when I use the apple on my iPhone for the first time, I put in my Apple ID for the iPad, didn't work. Need to create a new one. Why? How can I just use my iPad ID on my iPhone?

    I have ad Apple ID on my iPad , when I use the apple on my iPhone for the first time, I put in my Apple ID for the iPad, didn't work. Need to create a new one. Why? How can I just use my iPad ID on my iPhone?

    Hi kamfong,
    Went to Settings where?
    If you want to use your exisiting Apple ID on your iPad, you need to:
    1.     Go to Settings>iTunes & App Store and sign out the new ID, and then sign on the old one
    2.     Go to Settings>iCloud, scroll to the bottom and delete the iCloud account, and the sign back onto iCloud using the old ID
    You still have not indindated why you are saying that using your old ID originally "didn't work". What do you mean by that? Did you get some sort of error when you tried to sign on with your exisiting Apple ID?
    Cheers,
    GB

Maybe you are looking for

  • Trade Up to iPhone 5 FAQ

    Get a minimum $150 Best Buy gift card after you trade in a working iPhone 4 or iPhone 4S and use it toward the purchase of an iPhone 5 16GB. Now $149.99 with 2-year agreement. See offer details below My iPhone 4/4S has a cracked screen, can I still t

  • WBS Issue

    Dear Experts, We have created Project PO with following taxes(VAT 5%, Excise Duty 10.3% and Freight)and simultaneously done the GRN for the same,but the issue is that when we are checking the budget in CJ33 only BasicExcise dutyFreight value is assig

  • 2 set of conditions to use in a Single Select query in procedure

    Good day I have one procedure, want to use one 2 set of conditions in Where clause like where condition1 < value AND condition 2 > value AND condition 3 = value where condition 1 > value AND condition 2 < value AND condition 4 = value How we should c

  • Trigger to keep a single record form a table to a certain status

    Hi all. I have a table which has a "Status" field. I'm trying to accomplish, with a trigger, that the table can only have one record with an "Active" status, so whenever and Insert or Update occurs, if the new value for the "Status" field is "Active"

  • Serching with the heriarchy node and not the funds center name

    Hi, I am executing a query with a heirarchy on funds center and a heirarchy selection variable on the web.  When the selection appears I use the search help box to select a funds center.  When it appears in the selection screen it is using the node n