The creation of the export DataSource failed 0FIGL_O06, 0FIGL_O02

Hello Expert,
I have an issue with the export data source creation,
This is the detail,
Thank you very much in advance for your kind help,
The creation of the export DataSource failed
Message no. RSBM035
Diagnosis
The creation of the DataSource &v1& was unsuccessful.
System Response
Whilst generating the export InfoSource, the metadata for a DataSource must be generated. An error arose when doing this.
Procedure
Consult the appropriate developer (function module: RSB1_OLTPSOURCE_GENERATE).

Niurka,
Is this datasource for a hierarchy? See if note - 403092 is relevant.
Viren

Similar Messages

  • The Creation of Export DataSource Failed Error while transporting ODS Cube

    Hi  All,
    I am facing this issue from last 1 week.. i had developed an ODS cube in APO-DP BW which will fetch data from SAP R/3 and its working fine in APO Dev Server.  But when i transport this cube into APO PAC(Prodn Server) the below error i am getting..
       Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Activation Mode)
       The creation of the export DataSource failed
       Password logon no longer possible - too many failed attempts
       Password logon no longer possible - too many failed attempts
       Error when creating the export DataSource and dependent Objects
       Error when activating DataStore Object ZANAUTSL
    I also updated the transport conversion tables but still problem not resolved.
    Immediate help is hightly appreciated.
    Thanx
    AJ

    Hi AJ,
    Looking at your error, it seems that the RFC user's password is locked and hence connectivity from R/3 towards APO BW is broken.
    You know the name of your export datasource (from R/3 to APO BW). Find out the name of your R/3 source system e.g. PACCLT000, by scrolling to the right against teh export data source.
    Take help of your Basis or EAI team to identify the RFC destination corresponding to the connectivity from the R/3 source system (PACCLT000) to your APO BW system. (If needed ask for help from your BW team, I am not very sure how connectivity would be set up from R/3 to APO BW, I guess this would be independent from CIF connectivity)
    For this RFC connection from R/3 to APO BW, see which RFC user is maintained in SM59 in APO and ask your security team to reset (or unlock) the password of this RFC user in R/3, and then if required update the user password details in SM59 in APO also.
    After this, your issue should get resolved.
    Thanks - Pawan

  • DSO activation failed due to creation of the export datasource failed

    hi experts,
    i am activating DSO, but failed. Cause is "The creation of the export DataSource failed"
    there are many threads in the forum saying restoring the BI myself source system can address it, I tried many times, but failed.
    I used program RSDG_ODSO_ACTIVATE to activate an already activated DSO, it returned same error and the original activated DSO turned into inactivated. So I guess there must be something wrong with the setting.
    please advise, thanks!
    attach error info:
    The creation of the export DataSource failed
    Message no. RSBM035
    Diagnosis
    The system could not create DataSource .
    System Response
    The metadata for a DataSource must be created while the export InfoSouce is being generated. An error occurred at that time.
    Procedure
    Consult the appropriate developer (function module: RSA1_OLTPSOURCE_GENERATE).
    The delta process ODS does not exist
    Error when creating the export DataSource and dependent Objects
    Error when activating DataStore Object ZFIM_D09

    Hi,
    As I read the system RESTORE option should resolve your issue. From RSA1 try to restore your source system and try to active your DSO again.
    Regards,
    Durgesh.

  • Transport Error-The creation of the export DataSource failed

    Hi Experts,
    I am transporting a DSO from DEV to QA in 7.0 system.While transporting the DSo i am getting the below mentioned error.
    The creation of the export DataSource failed
    Reading the Metadata of APMD0009 ...
    Creating DataSource 8APMD0009 ...
    Password logon no longer possible - too many failed attempts
    Password logon no longer possible - too many failed attempts
    Error when creating the export DataSource and dependent Objects
    Error when activating DataStore Object APMD0009
    the request conatins just the DSO and not the Export datsource.i have also tried exporting both together still it failed.
    I have referred OSS note No.597326 for the same.But it didnt helped in resolving the issue.
    Has any one come across this kind of an issue.
    Thanks in advance!!!!!
    Regards,
    Umesh.

    No it didnt seem to work still got the same password error..                                                                               
    Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Activation Mode)              
    /     The creation of the export DataSource failed                                                                 
          Name or password is incorrect (repeat lo gon)                                                                
          Name or password is incorrect (repeat lo gon)                                                                
          Error when creating the export DataSource and dependent Objects                                              
          Error when activating DataStore Object 0BBP_BID                                                              
    /     The creation of the export DataSource failed                                                                 
          Name or password is incorrect (repeat lo gon)                                                                
          Name or password is incorrect (repeat lo gon)                                                                
          Error when creating the export DataSource and dependent Objects                                              
          Error when activating DataStore Object 0BBP_QUO                                                              
    /     The creation of the export DataSource failed                                                                 
          User not authorized. Session terminated                                                                      
          User not authorized. Session terminated                                                                      
          Error when creating the export DataSource and dependent Objects                                              
          Error when activating DataStore Object 0PUR_DS03                                                             
    /     The creation of the export DataSource failed                                                                 
          Name or password is incorrect (repeat lo gon)                                                                
          Name or password is incorrect (repeat lo gon)

  • The creation of the export DataSource failed

    Dear All,
    Can u give me the some information to fix the following error which i got while moving Multicube from Dev sys to Prod. sys. multi cube consits of lot of ODS object as dependent objects.
    Error FYI.
    The creation of the export DataSource failed
    RFC connection to source system PBWCLNT300 is damaged ==> no Metadata upload
    RFC connection to source system PBWCLNT300 is damaged ==> no Metadata upload
    Error when creating the export DataSource and dependent Objects
    Error when activating ODS Object 0CRM_CN2P
    Regards,
    Veeru.

    Hi Srinivas,
    If itz SS problem i can able to transport the other objects like cubes, Info Obj.. etc. only while transporting the ODS obj it is showing
    can u help me on this.
    any way i wil chk with basis team and ask to reset PWD.
    Regards,
    Veeru.

  • ODS activation error( The creation of the export DataSource failed

    Hi Friends,
             i have a problem activating the ODS. after defining the ODS, when i try to activate the following error is occured
    1.The creation of the export DataSource failed
    2.RFC connection to source system BWD100 is damaged ==> no Metadata upload
    3.Error when creating the export DataSource and dependent Objects     
    Any help would be appreciated
    Thanks

    Seems that there are one or more characteristics in the ODS for which one or more attributes may be new or inactive.
    Please see SAP Note 597326..Pasting the content below..Solution steps are also given..
    Symptom
    When you activate or transport ODS objects, the following errors appear in the log:
    "The creation of the export DataSource failed". Message number RSBM 035
    "Error &1 in function module &2". Message number RSBM 006
    "Error when creating the export DataSource and dependent Objects". Message number RSDODSO 169
    "Error when activating the ODS object &1". Message number RSDODSO 168
    Other terms
    RSBM 035, RSBM 006, RSDODSO 169, RSDODSO 168
    Reason and Prerequisites
    A characteristic involved is active but it is using new or inactive attributes.
    Characteristics involved are all characteristics used in the ODS object.
    Solution
    Check all characteristics involved as described in the following:
    Check the Compounding and Attributes tabs in the characteristics maintenance.
    All characteristics here must be active. This is displayed by a green icon.
    If this is not the case for a characteristic involved (a gray icon is displayed on one of the two tabs), activate the characteristic involved. This also activates the inactive dependent characteristics.
    After you have checked and repaired all the characteristics involved as described above, the loading/maintenance of master data should work again.
    cheers,
    Vishvesh

  • The creation of export datasource failed.

    Hi everyone! This is Chong Tao from Central Michigan University and I got one problem recently when I was doing my set-up of the BW course. I actually wanna copy the infocube but when I click the "Generate export datasource", it automatically comes up one error message "The creation of export Datasource failed". What should I do to overcome this problem? Thanks for paying attention to this problem and I need your valuable advice as soon as possible since it is for the student in this SAP BW course.

    Hi,
    I guess your objective is to copy an existing infocube. Right ?
    In that case, Right Click Infocube and use 'copy'. This will create another Infocube with the same structure, but with no data. You can then fill this copy Infocube by cerating transformation between the two infocubes and scheduling through DTP.
    'Generate export datasource'  can normally be done when there are two separate BW systems and you want an Infocube to be a source of data to another Infocube in a different BW system( though it can be used in the same BW system as well).
    Best Regards

  • Creation of export datasource failed

    Hi All.
    i copied a bussiness content data source object (DSO) and tried to activate it. it is giving error that
    "The creation of the export DataSource failed"
    Why ??? where m i going wrong.
    Thanks & Regards,
    Mo

    Hello,
         This is the problem becos the system is unable to create DATAMART for DSO object.  The following reasons might be hindering the creation of DSO.  Please check whether
    1)  You have proper authorization to create Datasource/Datamarts.
    2)  If so then, check whether DATAMART for the BW Self Source System is properly Installed from Business Content.  (I hope you are working on the version 3.5 or later.. here we need to manually install Aplication Component related to Datamart from Business Content so that Datamart creation never fails after that)
    3)  Also check BW Self Source System is properly functioning.
    Thanks
    Kishore Kusupati
    Edited by: Kishore Kumar K on Jul 28, 2008 5:35 AM

  • BusinessObjects Explorer The creation of the data source object tree failed

    Hi,
    I'm trying to create a new information space in BusinessObjects Explorer 4.0.  When I select the Universe I want to use and click "New" Information Space I get the following error.
    Failed to retrieve the data source details.
    The creation of the data source object tree failed.
    I'm just using a local installation, BI Platform 4.0, Client Tools, and Explorer are all installed on my Windows 7 machine.  It's intended to be a demo environment.
    Any guidance would be appreciated!
    Jeff

    Hi Jeff,
    first of all BI4 Enterprise is not supported on Windows 7 and it may not work properly for various reasons.
    But you can give this a try:
    Update the command line parametres of each of the Explorer Services to use a different value for the connection server libraries
    The changes are made to the command line of each of the Explorer services
    - Master
    - Exploration
    - Indexing
    - Search
    Remove the following from the command line parameters of the existing Explorer services
    -connectivity_dir "C:/Program Files (x86)/SAP BusinessObjects/SAP BusinessObjects Enterprise XI 4.0//dataAccess/connectionServer"
    Example of the original Explorer Master server command line parameters:
    -Djava.awt.headless=true -Dosgi.configuration.area=configuration.BI40.ExplorerMasterServer1 -server -XX:MaxPermSize=256m -Dosgi.clean=true -Xmx1g -jar plugins/org.eclipse.equinox.launcher_1.0.101.R34x_v20081125.jar -loggingPath "C:/Program Files (x86)/SAP BusinessObjects/SAP BusinessObjects Enterprise XI 4.0/logging/" -connectivity_dir "C:/Program Files (x86)/SAP BusinessObjects/SAP BusinessObjects Enterprise XI 4.0//dataAccess/connectionServer" -serverkind explorerMaster
    And update the server command line parameters with the following:
    "-Dbusinessobjects.connectivity.directory=C:/Program Files (x86)/SAP BusinessObjects/SAP BusinessObjects Enterprise XI 4.0//dataAccess/connectionServer"
    Example of an updated Explorer Master server command line parameters:
    -Djava.awt.headless=true -Dosgi.configuration.area=configuration.BI40.ExplorerMasterServer -server -XX:MaxPermSize=256m -Dosgi.clean=true -Xmx1g -jar plugins/org.eclipse.equinox.launcher_1.0.101.R34x_v20081125.jar -loggingPath "C:/Program Files (x86)/SAP BusinessObjects/SAP BusinessObjects Enterprise XI 4.0/logging/" -Dbusinessobjects.connectivity.directory="C:/Program Files (x86)/SAP BusinessObjects/SAP BusinessObjects Enterprise XI 4.0//dataAccess/connectionServer" -serverkind explorerMaster

  • The creation of the shadow copy on the backup destination has failed. Detailed Error: The Volume Shadow Copy operation failed with the error 0x80042316

    When using Microsoft Backup on a Windows Server 2008 SP2 (not R2 - [Microsoft version 6.0.6002]) I get the error "The creation of the shadow copy on the backup destination has failed. Detailed Error: The Volume Shadow Copy operation failed with the
    error 0x80042316"
    The odd thing is that when I start the backup manually, it works fine. When  it runs automatically the error appears.
    When doing a SFC /scannow I do get errors that can't be corrected.
    Is there anything short of rebuilding this machine (It's a DC and the only one this office has) I can do to fix this?

    Hi,
    0x80042316 means "Another shadow copy creation is already in progress". This error could occur when another VSS instance is running.
    Is there any third party backup application installed? Try to uninstall it to see the result. And please also check if there is another backup schedule which causes the conflict.
    Meanwhile please provide the result of:
    vssadmin list providers
    vssadmin list writers
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected].
    Hi,
    I do have Crashplan ProE running. It started at 1900 and the Windows Backup starts at 2000. I have modified Crashplan not to start until 2300 to see if that helps.
    Also:
    vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
    (C) Copyright 2001-2005 Microsoft Corp.
    Provider name: 'Microsoft Software Shadow Copy provider 1.0'
       Provider type: System
       Provider Id: {b5946137-7b9f-4925-af80-51abd60b20d5}
       Version: 1.0.0.7
    AND:
    vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
    (C) Copyright 2001-2005 Microsoft Corp.
    Writer name: 'System Writer'
       Writer Id: {e8132975-6f93-4464-a53e-1050253ae220}
       Writer Instance Id: {f0c7ee55-5885-4894-8dd3-14fffbdd4d2e}
       State: [1] Stable
       Last error: No error
    Writer name: 'SqlServerWriter'
       Writer Id: {a65faa63-5ea8-4ebc-9dbd-a0c4db26912a}
       Writer Instance Id: {017a0133-7577-4322-b513-04f72404b70a}
       State: [1] Stable
       Last error: No error
    Writer name: 'ASR Writer'
       Writer Id: {be000cbe-11fe-4426-9c58-531aa6355fc4}
       Writer Instance Id: {6b17d670-9ea8-4ff1-a59e-b474f4b893db}
       State: [1] Stable
       Last error: No error
    Writer name: 'Shadow Copy Optimization Writer'
       Writer Id: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
       Writer Instance Id: {56aad1bf-9bf1-4fde-b2f4-a706577c632d}
       State: [1] Stable
       Last error: No error
    Writer name: 'COM+ REGDB Writer'
       Writer Id: {542da469-d3e1-473c-9f4f-7847f01fc64f}
       Writer Instance Id: {e942d09d-276e-450a-9bf4-b1d5abe6af8a}
       State: [1] Stable
       Last error: No error
    Writer name: 'Registry Writer'
       Writer Id: {afbab4a2-367d-4d15-a586-71dbb18f8485}
       Writer Instance Id: {3737164b-61ac-454c-b1f7-42f2620f10db}
       State: [1] Stable
       Last error: No error
    Writer name: 'DFS Replication service writer'
       Writer Id: {2707761b-2324-473d-88eb-eb007a359533}
       Writer Instance Id: {39458257-aca4-481e-a302-994f3eb1e9a3}
       State: [1] Stable
       Last error: No error
    Writer name: 'Dhcp Jet Writer'
       Writer Id: {be9ac81e-3619-421f-920f-4c6fea9e93ad}
       Writer Instance Id: {6a8ab4aa-760c-4102-a27f-58f570c9c572}
       State: [1] Stable
       Last error: No error
    Writer name: 'NTDS'
       Writer Id: {b2014c9e-8711-4c5c-a5a9-3cf384484757}
       Writer Instance Id: {53577013-8397-448e-9a25-c7cac08aa0a8}
       State: [1] Stable
       Last error: No error
    Writer name: 'IIS Metabase Writer'
       Writer Id: {59b1f0cf-90ef-465f-9609-6ca8b2938366}
       Writer Instance Id: {ee2c9173-92e7-455c-8f73-601647c0ddb2}
       State: [1] Stable
       Last error: No error
    Writer name: 'BITS Writer'
       Writer Id: {4969d978-be47-48b0-b100-f328f07ac1e0}
       Writer Instance Id: {b1f60392-9dfd-4e3a-bda6-3dc2cb622ba4}
       State: [1] Stable
       Last error: No error
    Writer name: 'IIS Config Writer'
       Writer Id: {2a40fd15-dfca-4aa8-a654-1f8c654603f6}
       Writer Instance Id: {a328aede-78f0-448e-9c36-e8379e9fe2a8}
       State: [1] Stable
       Last error: No error
    Writer name: 'WMI Writer'
       Writer Id: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0}
       Writer Instance Id: {c39fa334-5c9d-4906-a3b5-33c3444948e6}
       State: [1] Stable
       Last error: No error
    Writer name: 'NPS VSS Writer'
       Writer Id: {35e81631-13e1-48db-97fc-d5bc721bb18a}
       Writer Instance Id: {3c9c5584-b5fd-48cf-8541-0c8bfa585ca0}
       State: [1] Stable
       Last error: No error

  • The creation of the new workspace has been partially successful

    Hi,
    I tried to create a Workspace called WSMedicina and the following error apears:
    The creation of the new workspace has been partially successful.
    Exception Message: Cannot find library item WsMedicina.
    The error cause: Cannot add Library Service.
    Please help me.
    Thanks.
    James.

    Hello James,
    What error appears in the application.log file for Workspaces when the creation fails? You can find this log at a path like this:
    $ORACLE_HOME/j2ee/OC4J_OCSClient/application-deployments/workspaces/OC4J_Workspaces_default_island_1
    Has creation of a library during new workspace creation worked in the past?
    Can the same user access the Content Services application successfully?
    regards,
    -Neil.

  • ERROR ODI-40837: An error occurred during the creation of the schema

    Hi I am trying to test an xml file server and keep getting the following error.
    ERROR ODI-40837: An error occurred during the creation of the schema: ODI-40738: A SAXException was caught while reading the model saying: Expected 'DOCTYPE'.
    JDBC URL jdbc:snps:xml?f=C:/Projects/prd.xml&ro=true&DOD=YES
    anybody could help as i dont find any blog or documentation about this error?.
    Thanks
    Edited by: user626688 on May 31, 2013 1:26 PM

    There seems to be some problem with your xml file. Please work with support channel to investigate this issue.
    You can also check the xml driver parameters details at http://docs.oracle.com/cd/E28280_01/integrate.1111/e12644/appendix_xml_driver.htm#CHDECBHH

  • When I complete my information about the creation of the apple Id, the screen show a message I have to find the support of Itunes. Help me

    When I complete my information about the creation of the apple Id, the screen show a message I have to find the support of Itunes. Help me

    Have you done a Disk Repair and a Disk Permissions Repair?
    If that doesn't resolve the problem I would suggest calling customer support about this issue as it is most likely on their (Apple's) end that the problem exists. 

  • Export DATASOURCE failing

    I removed a IO from ODS, This ODS feeds a CUBE
    The transport of ods/avtivation/transfer are successful along with the update rule for cube.
    However the generate of EXPORT datasource for ODS [ from ODS to Cube]is failing with the message DUMP -
    The termination occurred in the ABAP program "SAPLRSAC" in"RSAR_TRANSTRUCTURE_ACTIVATE".
    The comments in failed src code reads like                        
    *if generated ODS InfoSource,                         
    no PSA versioning possible                           
    This is not allowing me to do an init of ODS!
    When i do an INIT I get the followign message -
    There is no PSA for InfoSource '8ZODS' and source system 'QUALITYSYS'
    I tried the reimport ,now the reimport failed with a dump
    Any suggestion and help is appreciated

    I have gone thru the SE38-RSSGPCLA/TRASACTALL but still my 8Zods datasource is not active and its PSA is not active.
    When I do the init for the ODS its says 8zods has no PSA, so I try to generatre export datasource for ODS[which is inactive after trasport] i get a short dump as posted above.
    The change log and theold request[active] are deleted for ODS, BUT the requests do not go away from ODS-manage screen!!
    QUALITYSYS is a copy of PROD and is 3 months back, also we have done many changes to the ods and other datamart kind ods in this landscape after the syscopy.
    Thanks fro all your replies.

  • Problem with the creation of the date server with the technology Mysql

    Hi,
    I have installed date integrator 11.1.1.5.
    I have installed oracle database 11.2
    I have installed mysql 5.1.41 with xamp
    I have created the repository master and work.
    I have created data server for oracle .
    ok all correct
    I have created the date server for mysql but I cannot insert the data for jdbc (why ? where insert data ?) when except it creates me the date server.
    but when I try to add a physical schema me from this error and I don't see the list of the schema.
    java.lang.NoClassDefFoundError: bsh/EvalError
         at com.sunopsis.jdbc.driver.JavaDriver.connect(JavaDriver.java:80)
         at oracle.odi.jdbc.datasource.DriverManagerDataSource.getConnectionFromDriver(DriverManagerDataSource.java:409)
         at oracle.odi.jdbc.datasource.DriverManagerDataSource.getConnectionFromDriver(DriverManagerDataSource.java:385)
         at oracle.odi.jdbc.datasource.DriverManagerDataSource.getConnectionFromDriver(DriverManagerDataSource.java:352)
         at oracle.odi.jdbc.datasource.DriverManagerDataSource.getConnection(DriverManagerDataSource.java:331)
         at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter$ConnectionProcessor.run(LoginTimeoutDatasourceAdapter.java:217)
         at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
         at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
         at java.util.concurrent.FutureTask.run(FutureTask.java:138)
         at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
         at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
         at java.lang.Thread.run(Thread.java:662)
    how can I resolve my problem?
    thank you for help and cooperation.
    gabriele

    Hi,
    A sub asset master can be created with AS11 only.
    You cannot create a asset sub number under a main asset number, in the case, where different set of dep areas needs to be maintained.
    When you create a sub asset, all the dep areas will be copied to sub asset's master from main asset master. Since this set of dep areas cannot be different from main asset to sub asset.
    Hopw you understood this.
    Thanks,
    Srinu.

Maybe you are looking for