The custom form cannot be opened. outlook will use an outlook form instead

Hi,
I was referred to this forum by the Outlook team who thought you may be able to help.
I am getting the above error periodically on my Outlook 2010 at work.
I have a few email accounts defined on this and there appears to be no particular event that triggers the error message which regularly occurs every 10 to 15 minutes.
I have looked at other posts for this which suggest clearing the cache and emptying the FORMS folder which I have done but the problem just keeps reoccuring as usual.
The same file keeps appearing in the Forms folder called OUTLOOK.GL1 where GL1 is the name I gave to the email account that is on an MS Exchange server.
The file contains only 4 text charachters.
Now I havent added any customs forms at all, and certainly not in the last few days since this error has been appearing.
I have no idea where to look for any form definitions or where any forms might be required.
Can anyone offer some suggestions as to how I can go about solving this as clicking ok to this error message 6 times every 10 minutes is driving me nuts.
Thanks, George.

Hi George,
The lastest is with this link: http://www.outlookcode.com/article.aspx?id=64
There are a few options to try when clearing the cache doesn't work.
Regards,
Matthijs

Similar Messages

Error while opening the custom forms-''function not available to this respo

Error: Function not available to this responsibility , change responsibility or contact ur system administrator
Hiiiii,
While accessing the custom forms in release 12i we are facing the popup error and the form is not getting opened up: "Function Not available to this responsibility. Change Responsibilities or Contact your System Administrator"...
I check the custom top path in $APPL_TOP/admin/adovars.env... its fine there..
but the $Apache_top is not there...
can u plz tell me the solution....
Thanks
Meenakshi Verma

user609981 ,
If ur referring to forms, u need to search in appropriate forum, as this forum is only for OAF queries, and if its realted to OAF page, check the the function of oa page is attached to the specific responsibilty .
--Mukul

A document processed by the JRC engine cannot be opened in the C++ stack.

I keep getting this error message after I deploy a Visual Studio 2010 .net web application to my server. The application works perfectly in the development environment but it will not work on my Win 2003 32bit IIS6.0 web server. Below is also the error logged into the windows application log file.
Event Type:     Warning
Event Source:     ASP.NET 4.0.30319.0
Event Category:     Web Event
Event ID:     1309
Date:          8/5/2011
Time:          9:38:39 AM
User:          N/A
Computer:     IM-WEB1
Description:
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 8/5/2011 9:38:39 AM
Event time (UTC): 8/5/2011 2:38:39 PM
Event ID: f247f1c1b10745cabfad5864403ef15f
Event sequence: 11
Event occurrence: 1
Event detail code: 0
Application information:
    Application domain: /LM/W3SVC/1922464104/Root-2-129570287010549171
    Trust level: Full
    Application Virtual Path: /
    Application Path: E:\websites\enmarkscanning\
    Machine name: IM-WEB1
Process information:
    Process ID: 8048
    Process name: w3wp.exe
    Account name: NT AUTHORITY\NETWORK SERVICE
Exception information:
    Exception type: CrystalReportsException
    Exception message: Load report failed.
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.get_ProductLocaleID()
   at CrystalDecisions.ReportSource.CachedObjectReportSource.GetReport(RequestContext context, Boolean bAddToCacheWhenCreated)
   at CrystalDecisions.Web.CrystalReportSource.get_ReportDocument()
   at Reports_POD.Page_Load(Object sender, EventArgs e)
   at System.Web.UI.Control.OnLoad(EventArgs e)
   at System.Web.UI.Control.LoadRecursive()
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Unsupported Operation. A document processed by the JRC engine cannot be opened in the C++ stack.
   at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options)
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
Request information:
    Request URL: http://scanning/Rpt_POD.aspx?ID=169663
    Request path: /Rpt_POD.aspx
    User host address: 10.69.11.3
    User: wills
    Is authenticated: True
    Authentication Type: Forms
    Thread account name: NT AUTHORITY\NETWORK SERVICE
Thread information:
    Thread ID: 6
    Thread account name: NT AUTHORITY\NETWORK SERVICE
    Is impersonating: False
    Stack trace:    at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.get_ProductLocaleID()
   at CrystalDecisions.ReportSource.CachedObjectReportSource.GetReport(RequestContext context, Boolean bAddToCacheWhenCreated)
   at CrystalDecisions.Web.CrystalReportSource.get_ReportDocument()
   at Reports_POD.Page_Load(Object sender, EventArgs e)
   at System.Web.UI.Control.OnLoad(EventArgs e)
   at System.Web.UI.Control.LoadRecursive()
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Edited by: Don Williams on Aug 5, 2011 12:35 PM

Here is the error details in the web browser
Unsupported Operation. A document processed by the JRC engine cannot be opened in the C++ stack.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Runtime.InteropServices.COMException: Unsupported Operation. A document processed by the JRC engine cannot be opened in the C++ stack.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[COMException (0x80041811): Unsupported Operation. A document processed by the JRC engine cannot be opened in the C++ stack.]
   CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) +0
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) +95
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +270
[CrystalReportsException: Load report failed.]
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +333
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.get_ProductLocaleID() +31
   CrystalDecisions.ReportSource.CachedObjectReportSource.GetReport(RequestContext context, Boolean bAddToCacheWhenCreated) +438
   CrystalDecisions.Web.CrystalReportSource.get_ReportDocument() +201
   Reports_POD.Page_Load(Object sender, EventArgs e) +54
   System.Web.UI.Control.OnLoad(EventArgs e) +91
   System.Web.UI.Control.LoadRecursive() +74
   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2207
Any help is greatly appreciated.
Thanks!

How to Locate the Custom Form Name in Oracle Apps

Hi hussein,
We had a migration project from 11.0.3 NT to 11.5.10.2 AIX, and it include
1 form I guess. The client user is showing me the navigation tree where the customized form was located.
She opened the NT Oracle Apps 11.0.3 and it is showing the following:
Cash Management Responsibilty
+ Other
Enter Adjustment >> this is the customized form that she showed me
When the form opened, i shows a block with parent table "AP_BANK_ACCOUNTS_ALL" and a child table
"CEC_ADJUSTMENT_RECON".
My question is, based on the navigation, how do I know which is the location of the forms.fmx? of what
module was it registered to?
==============
I tried to navigate to the custom form and open it, then click "Help --> About"
from the menu bar, but it does not show you the form name and the forms executable location path,
(not like the standard forms of oracle where it shows the form name),
the "help" being shown is the help of the runtime form in a normal default oracle form window.
so I assumed that the custom form has been registered but not following the standard procedure.
==============
How do I reverse locate it? base on the "tree" > Enter Adjustment
Thanks a lot

Hi,
Please see (Note: 176852.1 - Integrating Custom Applications with Oracle Applications Release 11i), Step 10-f.
For the (Help > About) issue, please see if (Note: 556755.1 - Forms Version Not Showing On 'About Oracle Applications' Form From Help Menu) helps.
Btw, I guess we had a similar discussion before in this EBS 11i Customized Oracle Forms and Reports.
Regards,
Hussein

The document "anything" cannot be opened

So a few years ago I bought iWork and moved all of my life's work into Pages. Then I took a break for a while, came back, and Pages no longer will open any files. Every attempt gives me "The document 'whatever' cannot be opened". These are all files I created WITH Pages and worked on IN Pages.
I've read some of the similar posts - this isn't a version problem. I only have the one version of iWork and only the one original version of Pages: Pages 1.0.2.
When I go to the File menu and select "New" I get "The template "Blank.template" could not be opened". What is going on?
I did move from my original computer to a new Mac Pro and did the auto-transfer thing. Maybe it botched up the transfer.
Apple software on an Apple computer running Apple OS. I'm not impressed.

I don't own the first version of Pages so I can't check.
I wouldn't be sure that this old version is compatible with 10.6.3.
This operating system requires the very last version for Pages v3 : 3.0.3
and for Pages v4 : 4.0.3
Pages v1 and v2 didn't got an update for 10.6.3.
It may be why you can't open your files with it.
Try to download the iWork free trial version.
It's a 30 days one and after the 30 days, it becomes a reader only application.
Yvan KOENIG (VALLAURIS, France) samedi 3 avril 2010 19:44:20

I cannot open Pages from the app or from a saved document on the desk top. I get an error: "The application Pages cannot be opened -1712" Any suggestions?

I cannot open Pages from the app or from a saved document on the desk top. I get an error: "The application Pages cannot be opened -1712" Any suggestions?

The following previous discussion has a solution that worked for a variety of people with the -1712 error on a variety of applications and may help: The application Safari can't be opened -1712

Error: A document processed by the JRC engine cannot be opened in the C++

Hi,
I developed a Web Application, wich have some Crystal Reports. I am using VS2010, C#, Framework 4 and I installed the last version of CR.
The thing is that if I run the application with Visual Studio it works fine, it show the reportes without errors, but when I deploy it (in the same machine, just to try), I am getting the error:
Unsupported Operation. A document processed by the JRC engine cannot be opened in the C++ stack
[COMException (0x80041811): Unsupported Operation. A document processed by the JRC engine cannot be opened in the C+ stack+
   +CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) 0
   +CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) 147
   +CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() 422
[CrystalReportsException: Could not load the report.]
   +CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() 549
   +CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) 1613
   +CrystalDecisions.CrystalReports.Engine.ReportClass.Load(String reportName, OpenReportMethod openMethod, Int16 parentJob) 161
   +CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport() 168
   +CrystalDecisions.CrystalReports.Engine.ReportDocument.get_ReportDefinition() 73
   +AplicacionWeb.Shared.PrintReports.ImprimirReservaEvento(Int32 idEvento, Int32 idTipoEvento, String rutaNombreReporte) 143
   +System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) 154
   +System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 3707
This is the portion of code that calls the report.
        protected void btnImprimirReserva_Click(object sender, EventArgs e)
        {            PrintReports printReports = new PrintReports();
            string ruta = string.Empty;
            int idEvento = int.Parse(hdnIdEvento.Value);
            int idTipoEvento= int.Parse(ddlTipoDeEvento.SelectedValue);
                ruta = Server.MapPath("/Reportes
rptEvento.rpt");
                printReports.ImprimirReservaEvento(idEvento, idTipoEvento, ruta);
public void ImprimirReservaEvento(int idEvento, int idTipoEvento, string rutaNombreReporte)
        {            int cantCopias = (idTipoEvento == TiposEvento.Egreso.GetHashCode() ? 3 : 2);
            TextObject originalDuplicado;
            rptEvento oReporte = new rptEvento();
            oReporte.FileName = rutaNombreReporte;
            originalDuplicado = (TextObject)oReporte.ReportDefinition.ReportObjects["txtOriginalDuplicado"];
            for (int i = 0; i < cantCopias; i++)
                oReporte.SetParameterValue("@id_evento", idEvento);
                if (i == 0)
                    originalDuplicado.Text = "Original";
                if (i == 1)
                    originalDuplicado.Text = "Duplicado";
                if (i==2)
                    originalDuplicado.Text = "Triplicado";
                oReporte.PrintToPrinter(1, false, 0, 0);
I tried several things but I can not solve the problem. Could you please help me with that issue?
Edited by: frangambino on Feb 15, 2012 4:20 AM

Hi,
Take a look at below threads where this issue is discussed,
[http://forums.sdn.sap.com/thread.jspa?threadID=2011850|http://forums.sdn.sap.com/thread.jspa?threadID=2011850]
[http://forums.sdn.sap.com/thread.jspa?threadID=1975259|http://forums.sdn.sap.com/thread.jspa?threadID=1975259]
[http://forums.sdn.sap.com/thread.jspa?threadID=2031409|http://forums.sdn.sap.com/thread.jspa?threadID=2031409]\
Also, is it a 64 bit machine? check the target platform of the application and set it accordingly.
Few things to try
- Check if the reports exist and are accessible by the application (permissions, filepath,)
- Do not publish the report using the publish option, just as a test copy them manually.
See if this helps,
- Bhushan.

Why does it say my event is already open with the same identifier so the second document cannot be opened?

I have been working for 7 hours today on a major 3-month project. Everything was okay until I closed it and tried to open it. I received this error:
"/Volumes/MediaSAN4/Workbench/HRL /Final Cut Events/Move-In is already open with the same identifier as /Volumes/MediaSAN4/Workbench/HRL /Final Cut Events/Move-In, so the second document cannot be opened.
Move one of these documents out of your Final Cut Events folder. To avoid this problem, copy events from within Final Cut Pro."
not sure what it wants me to do.
When i hit ok EVERY event is gone. all projects say missing event. Even the two I'm not working on. I'm so frustrated I've thought about starting the project over in 7 but I want to stick with it.
I work for a university and have not been able to find help, even from my boss. The only thing I have found to fix it is to dismount the drive (mediasan4) and then remount it and it reconnects everything. But this can't be a good way to work. There are no duplicate events anywhere. there IS for some reason a duplicate mediasan4 drive in the project library, but not under the events library. I have been working in one and everytime I make an edit to my projects in there it makes the changes to the other one. I cannot find a way to delete it. We just reinstalled fcpx a few days ago.
Any and all help is greatly appreciated!

Oh yea sorry about that, but yes sir, I sure am. The SAN not the drive. I have tried renaming the event as well. Thanks for checking though.

Enabling eRecord for standard WIPMOVE in the custom form using wip interfac

Hi,
Anyone know how to trigger the eRecord for the standard WIPMOVE transaction in the custom form using WIP Interface (wip_move_txn_interface & wip_movproc_pub.processinterface).
I have done all the necessary setting and eRecords is getting generated in the standard out of box form. But when i call the same WIPMOVE transaction through a custom form using WIP Interface it is not generating eRecord.
As suggested by cookbook I tried EDR_ERES_EVENT_PUB.RAISE_ERES_EVENT, ERES.PERFORM_TRANSACTION, nothing is working out.
Any suggestion ?
Thanks,
Senthil

Hello,
It seems best to create a Service Request for this issue.
Regards, Carlo.

I am on a trial version of InDesign in Creative Cloud and before I purchase need to know why and the files cannot be opened by others using CS6. Isn't Cloud compatible with CS6 design software?

I am on a trial version of InDesign in Creative Cloud and before I purchase need to know why and the files cannot be opened by others using CS6. Isn't Cloud compatible with CS6 design software?

Industry standard files such as JPEG are compatible with many brands/versions of programs
Proprietary files such as those created by InDesign are often not backwards compatible, due to new features in newer program versions
This is not unique to Adobe... MS Word DOCX files are not backwards compatible with earlier versions of MS Word

HT201272 My A&E app will not install. It shows on the purchased screen and says "Open" but will not install... Help

My A&E app will not install. It shows on the purchased screen and says "Open" but will not install... Help

open sys. prefs, cd/dvd select how you want disc to open

I cannot access my folders and when I click on Finder, it says "the application Finder cannot be opened" then a number 10810. HELP!

After shutting down and rebooting, I find I have no folders on display on the desktop and when I click on the Finder icon, a message comes up that says "the application Finder cannot be opened" followed by the number 10810. HELP!

You could do it by cloning. I have read OSX installations of a single version can be machine specific too, so even if this were a Tiger compatible drive a clone might not work. I haven't seen anybody actually state a specific case where they had problems on a machine compatible with the OS version because of this though. The last case I can recall of system specific installations was back in OS7 days with system enablers. I have moved Tiger between machines by moving the drive with no problems, but the machines were pretty similar models (both Quicksilver, just a year difference production model).

When I right click on a link "Open link in new tab" since a few days, it "jumps over" the tab to the right and opens in the tab next to that. How can I change this back to opening in the tab next to the page from which I opened as it used to be?

When I right click on a link "Open link in new tab" since a few days, it "jumps over" the tab to the right and opens in the tab next to that. How can I change this back to opening in the tab next to the page from which I opened as it used to be?

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

How to limit the amount of disk space Time Machine will use?

On Yosemite, how do you limit the amount of disk space Time Machine will use?
I'm using a Seagate Goflex Home 2tb drive connected to my router as a Time Machine backup drive. I use this for three things 1)Time Machine 2) an occasional backup of windows document subdirectory 3) backup of music and photos for long term storage. Doing something like re-partioning the drive is not an option. I'll just go buy another drive for time machine's sole use. In addition, using software from Seagate is not an option. I don't want to use their software for different reasons (mainly the GoFlex home is really designed as a "media server" which I don't use. I, of course, use iTunes. ) On the Mac, I'm only using about 250GB total but time machine is rapidly using up space.
Apparently using a terminal command like below, used to work, but no longer works under Yosemite.
For a limit of 100gb the number below would be 100 x 1024
sudo defaults write /Library/Preferences/com.apple.TimeMachine MaxSize 102400
To remove the limit, use the following command:
sudo defaults delete /Library/Preferences/com.apple.TimeMachine MaxSize
Now, I'm not too familiar with terminal and I'm not about ready to issue a command without knowing exactly what it is going to do.
Is there an easier "switch" someplace or an app that does this?
If I don't limit the size, at some point there will not be any space left for windows backups and additional photo and music files.

Hmm- added "sudo" and there was no error reported:
sudo defaults write /Library/Preferences/com.apple.TimeMachine MaxSize xxxxxx
I guess we'll see.

When I call out on my iphone the receiving party cannot hear me, if I use earphones they can. Is there a fix for this?, when I call out on my iphone the receiving party cannot hear me, if I use earphones they can. Is there a fix for this?

When I make or receive calls on my iphone 4S the receiving party cannot hear me unless I use earlphones is there a fix for this?

Hello Fred91
Start your troubleshooting with the article below to go through and help isolate the issue with your iPhone.
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Regards,
-Norm G.

I am living now in UAE if I bought an I pad from your website is the warenty for it and how I will use the waranty

I am living now in UAE if I bought an I pad from your website is the warenty for it and how I will use the waranty

You can find authorized Apple dealers in Abu Dhabi by clicking here. They can answer purchase questions and most can handle warranty service.
By the way, this forum is for questions about the iPod touch, not the iPad. If you have questions specific to the iPad, it would be best to ask them in the iPad forum.
Regards.

The custom form cannot be opened. outlook will use an outlook form instead

Similar Messages

Maybe you are looking for