The customizing navigation for transaction type 165

Hi All,
Could anyone show me the customizing navigation for transaction type 165?
Thanks a lot

Hi,
transaction AO73:
CU:
-> Asset Accounting
-> Transactions
-> Acquisitions
-> Define Transaction Types for Acquisitions
regards Bernhard

Similar Messages

Could anyone show me the customizing navigation for Manual Accruals?

Hi All,
Could anyone show me the customizing navigation for Manual Accruals?
Thanks

Hi,
These tow links are very use full not only for manual accrual but also new ear of Accrual Engine.
https://websmp110.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700006312672006E
https://websmp110.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000264642007E
Regards
Javed

The customizing navigation for V_T001F

Hi All,
could anyone show me the customizing navigation for V_T001F???
Thanks

Dear Rossi,
IMG --> Define Form Names for Correspondence Print
I hope this helps.
Mauri

The customizing navigation for t.code OBA1

Hi All,
could anyone show me the customizing navigation for t.code OBA1
Thanks

IMG -> Financial Accounting -> General Ledger Accounting -> Periodic Processing -> Valuate -> Foreign Currency Valuation -> Prepare Automatic Postings for Foreign Currency Valuation.

XD02 transaction to change the customer data for updating KNA1 table?

Hi all,
How can we use XD02 transaction to change the customer data for updating KNA1 table?
Give the steps.
Thanks in advance
rk

Hi KR,
Why don't u use BDC to run XD02.
With Regards,
Zafar Ali

How to find the customer exits for a particular transaction

hi
how to find the customer exits for a particular transaction

Hi jyothsna vankadari ,
ther is a convenient way to find all BADIS called. You may know that BADIS are the newer version of EXITs.
I would suggest you to go for BADI.
Follow the below steps to find out what all BADI's are called when you press any button in any transaction.
1) Goto se24 (Display class cl_exithandler)
2) Double click on the method GET_INSTANCE.
3) Put a break point at Line no.25 (CASE sy-subrc).
Now
4) Execute SAP standard transaction
5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
7) This way you will find all the BADIs called on click of any button in any transaction.
Regards,
Clemens

Copy Control for Transaction Types

Hi,
Was wondering if someone could help on following topic. We need to specify the possibility of copy control (follow-up) for certain transaction types in CRM 6.0. I've specified the source TT (ZAPP) and the target TT (ZCON) in customizing activity : Define Copying Control for Transaction Types.
ZAPP = Custom Appointment Activity
ZCON = Custom Opportunity
Now, when I want to create a follow-up for ZAPP in the WebUI (via dropdown 'More' and action 'Follow-Up'), I always get an extensive list of transaction types (about 30) rather than only the opportunity that I originally specified. Any ideas?
Thank you,
Sebastiaan.

Hi Kai,
Many thanks for your answer. Indeed, the COPY_DOCUMENT is a very good alternative as it also directs the flow for follow-up. However, I have a question in regards to using this method. I can see that there are parameters that need to be provided (like PROCESS_TYPE etc) but apart from that is it also possible to change fields in the copied document.
e.g. Currently the description of the copied document gathers the description of the action definition, but how can you pass the description of the previous document for instance? Is this also done via the actual parameters?
Thank you,
Sebastiaan.

Date type-specific Customizing missing for date type ACTActPln

Hi all.
I'm using a Web Service obtained by copying the CRM 7.0 built-in WS APPTACTCRTRC.
I'm using it to create Appointments using an Adobe Interactive Form.
It goes everything fine (a Date is created in the system, with all the input data properly set) excepted the dates...
The WS uses two TIMESTAMPS, TIMESTAMP_FROM for StartDateTime and TIMESTAMP_TO for EndDateTime, whereas the GUI transaction to create Dates accepts dates and times in separated fields.
Going in Debug I can see that the execution ends with the following error, referred to the involved entity (CRM_APPOINTMENT):
Date type-specific Customizing missing for date type ACTActPln
CRM_APPOINTMENT uses date profile 0000000001 with three possible date types: ORDERACTUAL, ORDERPLANNED and ORDERPROPOSED and I cannot find anywhere date type ACTActPln (just to add it in customizing).
Is anyone able to enlight me?
Thank you in advance!
Alessandro
PS I've years of experience in Java programming but I'm quite new to the SAP world. Maybe the problem is not a problem at all, but it seems to me as such. Even if it has a trivial solution, please let me know. Thx!

Hi,
Well I was about to write that you should enter date in decimal format. but you already did that as mentioned in How to set a date in a Form where the bound date format is a decimal?
In response to following from above thread (copied for others to understand my response)
Hi all.
I'm successfully using the LiveCycle Designer and I've managed to remotely create Appointments using a CRM Web Service (a mere copy of APPTACTCRTRC).
The only problem I'm encountering is that I'm not able to set the dates/times (start and end of the appointment).
Dragging each of the two fields from the WSDL based Data Connection I obtain a Decimal Field limited to 15 digits.
How can I write a date and time in such a field?
I've tried with a retroverse date as YYYYMMDDHHmmss (for example, 20100301124500) but it does not work
(the appointment is indeed created, but with the start date and time fields filled with
the current date/time and the end date and time fields filled with the current date and time plus 10 minutes).
The retroverse date above is only 14 digit long, so, maybe, this is the problem.
But, given the field definition, I'm not able to fill a blank space between the date and the time.
I'm not able to put a dot either.
What should I do?
Any suggestions?
Thank you in advance.
Alessandro
15 digit in UTC time format here is fraction of second so you should enter 201003011245000 (add one more zero).
14th Oct 2010 16:00 should be written as 201010141600000, so just try it and and see if it works, I guess if you do not supply end time then by default it will be starttime + 10 min but this is just guess.
Regards,
Gourav

Error :The current budget for budget type CBUD is negative

Hi All, I am using the BAPI BAPI_0050_CREATE, which is using giving me the message
The current budget for budget type CBUD is negative (budget address)
I want to know how is this message being occured, so that i can do the same check in one of my program.
I deugged the BAPI and its using the method CL_FMKU_ENTRYDOC_HANDLER->DOC_CHECK_POST, but could not trace the CHECK done for the above error.
Please let me know the validation
Regards
Gopi

Hi,
notes 20347 and .302756.
Try to change following customizing temporarily to 160:
IMG->FI-AA->Transactions->Determine default transaction types for
     internal transactions->Acquisition from goods receipt
Another alternative could be to TEMPORARILY change the definition of transaction type group 10 so that it allows negative values.
139899   AA629 when posting MR01/MRHR/MIRO invoice receipt
AA629 is raised when the transactions per transaction type group in one year are negative in balance and the definition of the transaction type group only allows positive values (that means TABWG-VZJSAL is '+'). This is the case for transaction
type group 10. After posting transaction I recommend to set transaction   group 10 back to its original definition.
Regards Bernhard

Determine the customer numbers for which the installations

Dear All,
I configured VAR Service Desk on SolMan EhP1 + SPS 20, Everything is good, but I have a problem when run report AI_SC_GET_SAP_CUSTOMER_NUMBERS. It can determine my customer numbers, but have only my installation number in table V_AIINSNRS. There are no any installation number of my customers in table V_AIINSNRS .I need installation number of my customer are included in V_AIINSNRS. Please show me about that. Thank you very much!
Thanks and Best Regards,
Tru Hang

Hello,
This is the text from the SPRO activity help:
1.3.9.3.3 Data Transfer from SAP
Use
You can copy the following system data from SAP into the System LandscapeMaintenance (SMSY):
- Name,
- System number,
- Installation number
- Product version.
All data can be copied from SLD or RFC connection. This is an alternative for service providers who
have no, or only restricted, connection to their customers via SLD or RFC.
Requirements
You have determined or maintained the customer numbers for the systems to be generated.
Default Settings
The system automatically generates IBase components, which you need for the Service Desk and Change
Management scenarios. If you do not want IBase to be generated automatically:
1. Choose the transaction DNO_CUST04.
2. Deselect the field: IB_GEN_AUTO (description: Automatic IBase Generation).
3. Save.
Activities
Set Automatic Generation flag
You can:
1. Generate all systems per customer number, or
2. Generate systems per installation number
Case 1: Flag/check whether all systems with a customer number are to be generated, and maintain the
maintenance view V_AISAPCUSTNOS. In this case, the system ignores the flag at installation level.
Case 2:If you select installations for which systems are to be generated, maintain the maintenance view
V_AIINSNRS.
Maintain Settings in SMSY_SETUP
4. Choose: Edit -> Expert Settings.
5. Enter the value A or N for the option Generate Systems by OSS:
- A: Systems are only generated if a 3-digit alpha-numeric ID has been specified for the customer
in maintenance view V_BP_SPC, to distinguish the long names of systems with different
customer numbers, e.g. a system SOL for the customer SAP would be SOLSAP01.
- N: New systems are numbered sequentially when they are generated. System SOL would be
SOL00001.
6. Save.
Data is created by background job REFRESH_ADMIN_DATA_FROM_SUPPORT , which
should be scheduled regularly. If you want to copy the data immediately, you can schedule it
immediately . Check in the job log of transaction SM37 that it ran successfully.
Note: The user under which the job runs must be in the table AISUSER , with authorization for
system data maintenance in the SAP Support Portal.
I hope this information helps.
Best regards,
Miguel Ariñ

Credit block the customer with no transactions

I have a requirement i.e Credit Block the customer with no transaction for past 6 months
how can this be achieved

Hi
You need to decide first which transaction to consider i.e past six month sale order, delivery, billing etc.
If you want to consider the billing document for the sales history check - then take the help of ABAPer & write a logic in below user exit , while creating a sale order system should check if any bililng doc exist within last six month, if yes, there should not be a block if no, then set a block.
LVKMPFZ1: USER_CREDIT_CHECK1
To activate this block, go to OVA8, tick user1.
thanks

Do the customer return thruu2019 movement type 655 it goes to quality stock.

I m facing problem regarding 655 movements type.i m not activate qm view for that material . still i m getting lot .whenever they do the customer return thruu2019 movement type 655 it goes to quality stock
plz help me

Which Inspection type's lot is getting generated?
I presume its 05 inspection type.Either remove this inspection type or in customization in QCC3 >Inspection during shipping->change the customization for sales order type & mvt type .

Available Assigment Blocks for Transaction Type(s)

Hi ,
How can I assign a Standard SAP Assigment Blocks for Transaction Type(s) ?
Example assign Available Assignment Blocks "Activity Journal" to Transaction Type 0010
Thank you .

Hello,
this can be acchieved by redefinition of method ON_NEW_FOCUS in the context note of the assignment block, like this
query = CL_CRM_BOL_DQUERY_SERVICE=>get_instance( 'BTQAct' ).
query->add_selection_param( iv_attr_name = 'BU_PARTNER'
                              iv_sign = 'I'
                              iv_option = 'CP'
                              iv_low = lv_bpno ).
query->add_selection_param( iv_attr_name = 'PROCESS_TYPE'
                              iv_sign = 'I'
                              iv_option = 'EQ'
                              iv_low = '0001' ).
Best regards
Manfred

SRM 4.0- How to set the default values for product type (01) only for SC

The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.

The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF

How to find the user-exit for transaction fpp2

Hi experts,
could you help me how can I find the user-exit for transaction fpp2. I tried to after the package, but I did not find it.

Hi,
Use the following program to find user exits of specified code.
*& Tables
TABLES : tstc,     "SAP® Transaction Codes
         tadir,    "Directory of Repository Objects
         modsapt, "SAP® Enhancements - Short Texts
         modact,   "Modifications
         trdir,    "System table TRDIR
         tfdir,    "Function Module
         enlfdir, "Additional Attributes for Function Modules
         tstct.    "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
    WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
       WHERE pgmid    = 'R3TR'
         AND object   = 'PROG'
         AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
      SELECT SINGLE * FROM trdir
         WHERE name = tstc-pgmna.
      IF trdir-subc EQ 'F'.
        SELECT SINGLE * FROM tfdir
          WHERE pname = tstc-pgmna.
        SELECT SINGLE * FROM enlfdir
          WHERE funcname = tfdir-funcname.
        SELECT SINGLE * FROM tadir
          WHERE pgmid    = 'R3TR'
            AND object   = 'FUGR'
            AND obj_name = enlfdir-area.
        MOVE : tadir-devclass TO v_devclass.
      ENDIF.
    ENDIF.
Find SAP® Modifications
    SELECT * FROM tadir
      INTO TABLE jtab
      WHERE pgmid    = 'R3TR'
        AND object   = 'SMOD'
        AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
      WHERE sprsl EQ sy-langu
        AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
      WRITE:/(95) sy-uline.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
      WRITE:/1 sy-vline,
      2 'Exit Name',
      21 sy-vline ,
      22 'Description',
      95 sy-vline.
      WRITE:/(95) sy-uline.
      LOOP AT jtab.
        SELECT SINGLE * FROM modsapt
        WHERE sprsl = sy-langu AND
        name = jtab-obj_name.
        FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
        WRITE:/1 sy-vline,
        2 jtab-obj_name HOTSPOT ON,
        21 sy-vline ,
        22 modsapt-modtext,
        95 sy-vline.
      ENDLOOP.
      WRITE:/(95) sy-uline.
      DESCRIBE TABLE jtab.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No of Exits:' , sy-tfill.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(95) 'No User Exit exists'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
I executed the above program but there are no user exits for the specified Transaction.
Thanks,
Naveen Kumar.

The customizing navigation for transaction type 165

Similar Messages

Maybe you are looking for