"The Data is Invalid" When Trying to Approve Pending Computers in WDS

I'm having an issue were I can't approve pending computers in the WDS console or using WDSUTIL. I get "The Data is Invalid" whether I use default settings or choose the Name and Approve option. The server's computer account has full
permissions on the section of the AD tree (and all descendent objects) where the clients are to be created.
Pre-staging works fine.
No entries in the system/application logs appear when this error occurs.
This is Server 2012 R2.

Similar Messages

TS1717 I continue to recieve the message "signaure invalid" when trying to install itunes 11 and my date is correct on my computer

I cannot install itunes 11 as I continue to recieve a message invalid signature and the date and time are correct on my computer, Can anyone help?

Not sure about the CD burning issue but you can turn off the listing of your past purchases. Edit > Preferences > Store > Untick Show iTunes in the Cloud purchases.
tt2

Receive the following error message when trying to approve or reject from Pending "The service threw an unknown exception. See inner exception for details"

Hi, The server agent was grayed out. I uninstall it from control panel and removed it from agent managed. When I tried to install the agent, it failed. I installed the agent manaully and tried to approve it received the error message
"The service threw an unknown exception. See inner exception for details" I have the details but does not tell me much (I can post it). I removed it from control panel (while still showin in pending),
and tried to reject it. Again, received the same error message as above. This a very critical server, could someone help me with this issue? Thanks, Ziba

Thank you Alexey, please see the following details:
Date: 8/19/2010 7:28:51 AM
Application: System Center Operations Manager 2007 R2
Application Version: 6.1.7221.0
Severity: Error
Message:
Microsoft.EnterpriseManagement.Common.UnknownServiceException: The service threw an unknown exception. See inner exception for details. ---> System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail]:
Exception of type 'Microsoft.EnterpriseManagement.Common.DataItemDoesNotExistException' was thrown. (Fault Detail is equal to An ExceptionDetail, likely created by IncludeExceptionDetailInFaults=true, whose value is:
Microsoft.EnterpriseManagement.Common.DataItemDoesNotExistException: Exception of type 'Microsoft.EnterpriseManagement.Common.DataItemDoesNotExistException' was thrown.
   at Microsoft.EnterpriseManagement.Mom.DataAccess.DataAccessUtility.GetManagedEntityKeyValuePairs(IList`1 baseManagedEntityIds, DatabaseConnection databaseConnection)
   at Microsoft.EnterpriseManagement.Mom.ServiceDataLayer.DiscoveryDataManager.DeleteUserActionManagersByAgentPendingActionId(IList`1 agentPendingActionIds)
   at Microsoft.EnterpriseManagement.Mom.ServiceDataLayer.SdkDataAccess.RejectAgentPendingActions(IList`1 agentPendingActionIds)
   at Microsoft.EnterpriseManagement.Mom.ServiceDataLayer.SdkDataAccessTieringWrapper.RejectAgentPendingActions(IList`1 agentPendingActionIds)
   at Microsoft.EnterpriseManagement.Mom.ServiceDataLayer.SdkDataAccessExceptionTracingWrapper.RejectAgentPendingActions(IList`1 agentPendingActionIds)
   at ...).
   --- End of inner exception stack trace ---
   at Microsoft.EnterpriseManagement.DataAbstractionLayer.SdkDataAbstractionLayer.HandleIndigoExceptions(Exception ex)
   at Microsoft.EnterpriseManagement.DataAbstractionLayer.AdministrationOperations.RejectAgentPendingActions(IList`1 agentPendingActionIds)
   at Microsoft.EnterpriseManagement.Administration.ManagementGroupAdministration.RejectAgentPendingActions(IList`1 monitoringObjects)
   at Microsoft.EnterpriseManagement.Mom.Internal.UI.Views.PendingManagementView.<>c__DisplayClass8.<OnRejctAgent>b__7(Object , ConsoleJobEventArgs )
   at Microsoft.EnterpriseManagement.Mom.Internal.UI.Console.ConsoleJobExceptionHandler.ExecuteJob(IComponent component, EventHandler`1 job, Object sender, ConsoleJobEventArgs args)
System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail]: Exception of type 'Microsoft.EnterpriseManagement.Common.DataItemDoesNotExistException' was thrown. (Fault Detail is equal to An ExceptionDetail, likely created by IncludeExceptionDetailInFaults=true,
whose value is:
Microsoft.EnterpriseManagement.Common.DataItemDoesNotExistException: Exception of type 'Microsoft.EnterpriseManagement.Common.DataItemDoesNotExistException' was thrown.
   at Microsoft.EnterpriseManagement.Mom.DataAccess.DataAccessUtility.GetManagedEntityKeyValuePairs(IList`1 baseManagedEntityIds, DatabaseConnection databaseConnection)
   at Microsoft.EnterpriseManagement.Mom.ServiceDataLayer.DiscoveryDataManager.DeleteUserActionManagersByAgentPendingActionId(IList`1 agentPendingActionIds)
   at Microsoft.EnterpriseManagement.Mom.ServiceDataLayer.SdkDataAccess.RejectAgentPendingActions(IList`1 agentPendingActionIds)
   at Microsoft.EnterpriseManagement.Mom.ServiceDataLayer.SdkDataAccessTieringWrapper.RejectAgentPendingActions(IList`1 agentPendingActionIds)
   at Microsoft.EnterpriseManagement.Mom.ServiceDataLayer.SdkDataAccessExceptionTracingWrapper.RejectAgentPendingActions(IList`1 agentPendingActionIds)
   at ...).

Backup Error : The Data Is Invalid Windows Server 2008 R2

Hello,
I have a Problem when I try to make Backups to Partition C in Windows Server 2008 R2:
Error The Data is Invalid.
Obs: I can make backups for System Reserved Partition .
I had the same problem 2 months ago (the data is invalid), Then I folowed this the advice to delete "Framework64\v2.0.50727\Temporary
ASP.NET Files" and worked for me , from this post: http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/89052b85-9c9b-479f-ab76-a20da3cc4696
Now I have the same problem and I delete the
Temporary ASP.NET Files , but it is not working , I received the same error on backup:
"The backup operation that started at '‎2012‎-‎09‎-‎20T07:13:26.024163900Z' has failed with following error code '2147942413'. Please review the event details for a solution, and then rerun the backup operation once the issue is resolved."
When I try vssadmin list writers, Everything is ok , "No error" .
I tried to run :
net stop "System Event Notification Service"
net stop "COM+ Event System"
net stop "Microsoft Software Shadow Copy Provider"
net stop "Volume Shadow Copy"
cd /d %windir%\system32
net stop vss
net stop swprv
regsvr32 /s ole32.dll
regsvr32 /s oleaut32.dll
regsvr32 /s vss_ps.dll
vssvc /register
regsvr32 /s /i swprv.dll
regsvr32 /s /i eventcls.dll
regsvr32 /s es.dll
regsvr32 /s stdprov.dll
regsvr32 /s vssui.dll
regsvr32 /s msxml3.dll
net start "System Event Notification Service"
net start "COM+ Event System"
net start "Microsoft Software Shadow Copy Provider"
net start "Volume Shadow Copy"
But is not Working
Any Advice ?
Thank's

Hello Lucian,
the issue may be caused by an invalid entry inside the following registry sub tree.
HKey_Local_Machine\Software\Microsoft\Windows NT\CurrentVersion\ProfileList
Please open the registry editor with regedit.
Expand and local to the subtree, check if there is an entry that has a ".bak" value appended. If so, this may be cause the failure when trying to resolve the SID of the writer.
Please backup the registry key first, and then delete that entry with the extra ".bak" and reboot the server then test the backup
Run the command "vssadmin list writers" and make sure all the writers are stable with no errors
Please look for errors in application event logs after you initiate backup on the server
Sincerely, Asifkhan -- Please mark my post helpful if it was really helpful to you.

AGPM Error The data is invalid

I'm running into an intermittant error when using the AGPM v4 plugin with GPMC. Occasionally when I go to deploy a GPO that is pushing an application to a system, I receive an error like this:
Deploy GPO: FlagstaffAZ-B SBSC App Inst - Adobe Flash 10.1 test DFS...Failed
The overall error was: The data is invalid. (Exception from HRESULT: 0x8007000D)
Additional details follow.
[GPMC Error] The task cannot be completed. The application deployment script (.aas file) for [\\hr.local.ad\flagstaffaz-b sbsc\Apps\GPO\Adobe\fl10.1\install_flash_player_10_plugin.msi] cannot be regenerated.
The following error occurred:
The filename, directory name, or volume label syntax is incorrect.
[GPMC Error] The task cannot be completed. The application deployment script (.aas file) for [\\hr.local.ad\flagstaffaz-b sbsc\Apps\GPO\Adobe\sw11.5.7.609\sw_lic_full_installer.msi] cannot be regenerated.
The following error occurred:
The filename, directory name, or volume label syntax is incorrect.
[GPMC Error] The task cannot be completed. The application deployment script (.aas file) for [\\hr.local.ad\flagstaffaz-b sbsc\Apps\GPO\Adobe\fl10.1\install_flash_player_10_active_x.msi] cannot be regenerated.
The following error occurred:
The filename, directory name, or volume label syntax is incorrect.
1 actions failed.
From the AGPM server I can see the .msi files without issue using both the system account and the AGPM service account. I've added quotes around the UNC path without success as well.
The strange thing is that after I attempt to deploy a GPO like this and receive the above error I can no longer check out the GPO (I receive the same error). If I delete and create a new GPO with the same config 1/2 the time I will be able to deploy
the GPO assuming I create it and deploy it within 10 or so minutes otherwise I will receive the same error.
Has anyone run into this issue before or have a work around it?

Hi Florian,
Here are the step that I took to recreate this issue:
1. Start GPMC from Win 7 w/SP1
2. Create new Controlled GPO with "Create in archive and production"
3. "Check Out" the gpo.
4. Edit the checked out gpo and add the MSI package for software distribution (Computer Configuration\Policies\software settings\software installation).
5. "Check In" the checked out version of the gpo.
6. No issues so far.
7. Select Deploy to deploy the gpo and I get this error.
******** message starts here *********
Deploy GPO: Raffi - Test MSI...Failed
The overall error was: The data is invalid. (Exception from HRESULT: 0x8007000D)
Additional details follow.
[GPMC Error] The task cannot be completed. The application deployment script (.aas file) for [\\dwdmadwvp403\ldlogon\AdvanceAgent\DWD Default 042311.msi] cannot be regenerated.
The following error occurred:
The Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance.
1 actions failed.
******** message ends here *********
8. This same process performed on the AGPM 4.0 server (W2K8 R2) produces the same result.
9. I tried this same process on a W2K3 server using AGPM 2.5 and using the same .MSI file and it works just fine.
It seems that even the checked out version has the problem before you even check it in. I tried the following:
1. Start GPMC from W2K8 R2 w/no SP
2. Create new Controlled GPO with "Create in archive and production"
3. "Check Out" the gpo.
4. Copied the .MSI package to the local drive d:\temp.
5. Made sure the AGPM service account also has Full Control to d:\temp.
6. Edit the checked out gpo and add the MSI package for software distribution (Computer Configuration\Policies\software settings\software installation).
7. Before checking in the GPO I tried to generate an HTML report just to see what happens (right click on checked out gpo\Settings\HTML Report) and I get this error:
******* message starts here ******
Failed to generate a HTML GPO settings report.
The following error occurred:
An error occurred during a call to extension function 'GetCultureName'. See InnerException for a complete description of the error.
System.Xml.Xsl.XslTransformException (80131942)
******* message ends here ******
After you click OK on the error message the report comes up but you don't see your software settings information.
Same error even after I check it in and try to generate the HTML report.
Any advice is appreciated,
Raffi

Am i the only one who when trying to enter the code for creative cloud activation ?

I give up,i have been trying to activate a 3 month subscription for CS6 from Staples and every time i try the code it will not work. I have used the chat live and spent about 3 hours already going nowhere. I do not like talking on the phone to some help desk overseas and the only thing i think left to do is to return the junk.

I tried all that and even took a picture of the numbers and blew them up so a blind person could read them and had 3 others read them off. A simple way to fix the problem is get someone on Adobes staff to find a font that most people can read from whatever product the stick it to.
John McDonough
Date: Wed, 1 Aug 2012 18:33:58 -0600
From: [email protected]
To: [email protected]
Subject: Am i the only one who when trying to enter the code for creative cloud activation ?
    Re: Am i the only one who when trying to enter the code for creative cloud activation ?
    created by David__B in Adobe Creative Cloud - View the full discussion
Hey John,
Not sure if it helps or not, but I know sometimes with codes like that its really hard to tell certain characters apart, O - like in Oscar versus 0 - number and number 1 versus lowercase L like in Lima.
Might test entering it both ways if you have any suspect characters?
-Dave
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4592955#4592955
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4592955#4592955. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Creative Cloud by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

HT1539 iTunes says the code is invalid when it clearly is valid, what do I do? How do I get my digital copy??

I bought The Dark Knight a few years ago, I tried to download the digital copy before but I gave up. Now that I have my iPhone, I'm determined to get all the digital copies I'm entitled to! So I'm here to find out how to remedy the situation. iTunes says the code is invalid when it clearly should work. I didn't buy the DVD off the street or anything. iTunes doesn't give me any further options, so what can I do? Anybody have any advice, please?

Yeah, I actually did get it. I had to send an e-mail to Warner Bros. with all available info and my issue and they sent me another code that actually worked.
So I actually just had to do what varjak paw suggested, it just took a few days (maybe a week) and I forgot to get back to you guys. So, belated but all the same thank you, varjak paw!

ORA-22288: file or LOB operation FILEOPEN failed (The data is invalid)

Dear All,
I am trying to insert a image file (gif) to one of my field.
1. Here is my table structure and trying to insert gif image file to PIC file.
SQL> desc cis2.david_pic
Name Null? Type
ID VARCHAR2(5)
PIC BLOB
2. I using sql command to create directory and the path is pointing where the DB
server was installed.
SQL> create or replace directory MY_FILES as '\\hkqaa-db1\TEXT_IMPORT';
3. Written a script to insert empty blob first and than trying to use the dbms_lob.fileopen
to upload the gif file.
SQL> declare
2 l_blob blob;
3 l_bfile bfile;
4 begin
5 insert into cis2.david_pic values ( '1', empty_blob())
6 returning pic into l_blob;
7 l_bfile := bfilename('MY_FILES', 'bess_signature.gif');
8 dbms_lob.fileopen(l_bfile);
9 dbms_lob.loadfromfile(l_blob, l_bfile, dbms_lob.getlength(l_bfile));
10 dbms_lob.fileclose(l_bfile);
11 end;
12 /
4. After I ran my script I got this error message.
declare
ERROR at line 1:
ORA-22288: file or LOB operation FILEOPEN failed
The data is invalid.
ORA-06512: at "SYS.DBMS_LOB", line 475
ORA-06512: at line 8
Can any tell me what wrong? is this the way to insert image?
Thanks

Know this is an old post: (for sharing sake.)
Please try avoiding
1. the 'hyphen' in between the path (hkqaadb1 instead of hkqaa-db1)
2. Give direct path like 'C:\TEXT_IMPORT' instead of network path.
create or replace directory MY_FILES as '\\hkqaa-db1\TEXT_IMPORT'; -- Not working.
create or replace directory MY_FILES as 'C:\hkqaadb1\TEXT_IMPORT'; -- Working.
and this worked fine.
Edited by: Arunan.KL on Mar 23, 2011 5:04 PM

Getting serial number is invalid when trying to install acrobat 9 pro

Hello,
I am getting a message stating that the serial number is invalid when trying to re-install adobe acrobat 9 pro on windows 8. adobe support confirmed that the srial number I am trying to us is valid though. any help is appreciated.

Nope,I downloaded the software from adobe website: Download Acrobat products | 9, 8
All it says is "Invalid Serial Number" I already checked with adobe support and they confirmed that the serial number is valid, they won't provide any more help "because acrobat 9 is out of support now".

Error from command cacls - The Data is invalid.

Hello There,
I am trying to setup permissions on files under a directory. upon execution it gives error "The data is invalid".
echo y | cacls "C:/ProgramData/HP/HP BTO Software\datafiles\sec\*" /t /e /g domain\HPOMW:F system:F users:R
Same command runs on other machine without any problem for the same directoy.
Can someone assist me in fixing the problem?
-KAKA-

Hi,
Please recheck the parameters you used in the script, make sure it is correct for the directory you are running on.
I would like to suggest you post in the official scripting guys forum:
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home
Regards,
Yan Li
Cataleya Li
TechNet Community Support

I have two versions of Pr, one is the latest 2014 and when trying to open a Pr2014 session, I get an error message saying the project was saved in a newer version and cannot be opened. Help

I have two versions of Pr, one is the latest 2014 and when trying to open a Pr2014 session, I get an error message saying the project was saved in a newer version and cannot be opened. Could there be an issue with an older Pr application on the computer? Please help!

You need to be very careful which project you open in which version.
For 2014 make sure its on 2014.1 build 81.

HT201210 My iphone could not be updated. An unknown error occured (6) s the message coming up when trying to update iphone when on itunes. any help would be appreciated.

The above message appears when trying to update my phone wilst on itunes

http://support.apple.com/kb/TS3694#error6

How to check the date and time when a material is blocked

Hello,
Please tell me how can i check the date and time when a material is blocked or unblocked.
Regards,
Priyanka

Hi Pryianka,
Are you speaking about blocked status of material master ('X-plant matl status' > MM03 > Basioc view 1; 'Plant-sp. matl status' > MM03 > MRP 1) or your problem is to find out the date when your material was booked into blocked state (stock category).
If your problem is about mmr you can use the above mentioned MM04 (or MM03 > menu > Environment > Display changes).
If your problem is to find out when your goods were posted to blocked stock you have to use MB51 + relevant movement types (e.g. 103, 344) + batch + etc. ()
BR
Csaba

I receive the follwing error message when trying to open my ipod touch/itunes "the itunes libary.itlfile is lockedon a lockdisk or you do not have write permission on this file. How do I resolve this problem?

I receive the follwing error message when trying to open my ipod touch/itunes "the itunes libary.itlfile is lockedon a lockdisk or you do not have write permission on this file. How do I resolve this problem?

Repair iTunes Security Permissions
Right-click on your main iTunes folder and click Properties, then go to the Securitytab and click Advanced. Use the Change Permissions... button grant to your account (or the Users group) and SYSTEM full control of this folder, subfolders and files, then tick the option to Replace permissions entries... which will repair permissions throughout the library. When complete switch to the General tab, click in the Read-only check box to clear it, then click Apply.
If you don't have the option to change the permissions then use the Owner tab and Edit... button to take ownership from an account with administrator privileges. Tick the option to Replace owner on subcontainers and objects.
Repeat with the media folder if it isn't stored inside the main iTunes folder.
If you've brought over the library from another computer you may also want to remove any "mystery" identities (S<string of dashes & digts>) that have come over from the old computer...
The images above are from Windows 7. Hopefully the system isn't too different in Windows 8.
tt2

Just recently I am getting the following error message when trying to access web sites. I get a pop up window stating "Exc in ev handl: TypeError: c.location is null" then I have to click ok. It is an issue with some plug-in?

Just recently I am getting the following error message when trying to access web sites. I am using Firefox browser version 10.0.2. I get a pop up window stating "Exc in ev handl: TypeError: c.location is null" as the web site page is being displayed in browser winder. Then I have to click ok. It doesn't matter what web link/site I go to it happens. It is an issue with some plug-in?

I have advised McAfee's product team of the problem and this thread, and they're looking into it now.

"The Data is Invalid" When Trying to Approve Pending Computers in WDS

Similar Messages

Maybe you are looking for