The data is not loading in second level ODS

Hi Gurus,
I am loading the data from first level to second. The data is properly loading to first level but second it is picking 0 records inspite there are 19604 records. This problem arised after the changes went live which I have done and tested in Quality server and was done correctly.
Please throw some light.
Many thanks,
Sunil Morwal.

Hi sunil..
1) In monitor screen is it green ??? like in the Processing is it NO data...
2) check in the status tab of the monitor. what is the status???
If the second level request is green adn available for reporting and it has activated..and in the first level ODS the datamart status is checked.. then there is no problem..
the error is coz there i sno ercords which was changes...
cos the records which were come into the ODS was overwriten adn there are no records for delta..
So there is no problem,,
just do the loading for the next deltas...
Looks like everyhting is okai...
regards
AK
points=thanks

Similar Messages

PSA data change not loaded to the target.

Hi all,
We have the data in PSA (it is the master data)- while transferring the data from PSA to the target, system throws error - on analysing the error we found that the characters in the data is wrong, the same was corrected in the PSA - on reloading after correction to the target, system is ignoring the corrected records and loading only the other records.
What could be the reason for this behaviour.
Can experts help.
Regards,
M.M

Dear Mr.Goud/Murali,
Thank you for your immediate reply and instructions.
Mr. Goud,
The PSA QM status is only green but even then the corrected record is not loaded to the target.
Mr. Murali,
As per your information we do not have an Error DTP - i have only one DTP and we are in BI7.00 - I have deleted the request from the target and corrected the erroneous record and am trying to load only that record by using the filter option in the DTP - still the data is not loaded.
Can you suggest method of adopting - i am not able to understand why that corrected record is not loaded. Is it that manually corrected record in the PSA will not be loaded into the target?
Kindly clarify.
Regards,
M.M

AWM - After successull cube maintainance data does not load

Hi All,
After creating the cube when i maintain the cube the data does not load. I went back and looked at the mapping at the cube level and the dimension level and everything looks fine. Any clues why the data does not get loaded. Also, i did not recieve any error while maintaing the cube.
thanks

Hi,
I was able to resolve this issue. I did not map the cube properly especially the time dimension. Due to this the data did not get loaded in the cube. ReMapping fixed the problem.
Hope this helps other newbies..

Embedded Database - data does not load

Hello.
I am currently using NetBeans 6.5 and am experimenting with the CarsApp tutorial.
Whenever I create an application using the server database, the data loads automatically when the application starts.
However, when I create the application using an embedded database, the data does not load and I just get a blank table.
For more information, go to: http://forums.sun.com/thread.jspa?threadID=5366394&tstart=0
Thank you in advance!

I'm sorry, I didn't know it was so looked down upon.
I thought that since this topic pertained to both Destop Applications and JDBC, I could get the best and quickest answer if I posted in both.
Apparently, that was a mistake.
Thanks, anyways!

Data is not loading into the target table in BODS

BODS job is executing successfully but data is not loading.
can anyone please let me know what is the problem
Regards,
Deva

Hi Deva
The Information provided is very limited, what are your Source and Target Databases?
What is the structure of the job design?
If the job completed without error, review the job logs to confirm that rows were indeed processed.
Regards
Charles

If the data is not available in R/3 systems(Ex: MM), who will load the data

Hi All,
Can anybody tell me that if the data is not available in R/3 systems(Ex: MM), who will load the data into that?
Need Helpful Answers....
Regards,
Kiran Telkar

Hi kiran,
The data is generated in the R/3 when the business transactions take place.
No one loads the data into R/3 as it done with BW. R/3 is a OLTP(online transactional processing) system which aides the day to day transactions of a business & theese transactions are stored in the R/3 in there respective tables in the form of records, so one record is generated for each transaction done.
For example there will be record generated in different modules when there is an order placed or when a material is delivered against an order.
Hope this helps,
regards.

When I take a picture with my iphone, the date does not show when I down load the picture. Is there a way to program this?

when I take a picture with my iphone, the date is not downloaded to my picute. Is there a way to get the date put on my pictures.

Dropbox "Camera upload" option just rename the files and looks like this.

Navigational Attribute data is not display in Cube level and reporting

Hello ALL
Iam facing a problem like,I created Navigational attribute and I selected that navigational attribute in cube level also but data is not display in cube level.
What will be the problem?Pl help me out.
regards
balaji

Hi Dinesh
You mean base characteristic means loading data after creating Navigational attribute?Is it this way,(orelse can u tell me about this base characterstic)
Yes after making that particular attribute as a navigational attribute I loaded data in master data tables.
How to run Attribute change run?can u give me steps
regards
balaji

CDC Error (JOURNALIZED DATA is not loading into tartet database)

HI,
I have enabled source database for CDC and got green mark on source database model tables.
while inserting data into source, J$ tables updating JRN_SUBSCRIBER and other filed.
when I run the package/ interface JOURNALIZED DATA is not loading into target database.
i have implemented cdc for 7 source table.
and using JKM MSSQL Simple
and enable JOURNALIZED DATA in interface level.
and
source database is : MSSQL Server
Target Database : Oralce 11g.
please advice me.
thanks in advance.
Zakeer Hussain

Zakeer look into this link , -http://odiexperts.com/?p=1096 . Hope this helps.
also before running Can you right click on the Source Datastore and click on Journal Data and can you see the data ? and if still the data is not passing through ,in that case make temporary objects t- yes in LKM , IKM and debug and see at which step data is not flowing through and look if there is any filter or condition which is stopping it .
Still not able to figure out please tell us which step the data is not flowing through we will try to guide you.

I have purchased itunes match but the cloud will not load on my ipad 4.the only music that will show up is stuff that i bought from the itunes store.any ideas on how to get this to work?

i have purchased itunes match but the cloud will not load on my ipad 4.it works on my iphone 5 & it originally worked on my ipad.the only music that will show up is stuff that i bought from the itunes store.any ideas on how to get this to work?

On the MBP, in iTunes, switch to Song view and enable the iCloud Status column by pulling down View > View options and selecting the option for "iCloud Status." Close the small window. Look for any tracks that have a status of "waiting." If you see several of them disable iTunes Match while holding down the Option key. Quit iTunes, wait a few seconds, then open it again and turn iTM back on. Let it compelete the scan. Wait until all tracks that are "waiting" have a status of either "matched" or "uploaded."
On the iPad, turn off iTunes Match then launch the Music app and let the contents clear out. Power cycle the iPad for good measure, then re-enable the service once all the tracks in iTunes have been processed.

When typing an address in the location bar and pressing enter, nothing happens and the site does not load. How can I fix this?

When I type a new URL in the address bar (or location bar), and I either type the complete URL or select from the drop down list, nothing happens. I hit enter, and the website does not load in the current tab, new tab nor in a new window. Exactly the same when I hit the green arrow to the right of the address bar. I am using Firefox 8, and all my add-ins are up to date.
It has been working before. The setting to get Firefox to open new pages in a new tab from the address bar is there, so it should open a new tab. But I get nothing at all!
Please help, how can I fix this?
Thanks,
James.

That issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Firefox opens but no content is shown, url says the website but the tab does not load up and says '(untitled)'. how can i fix this?

firefox opens but no content is shown, url says the website but the tab does not load up and says 'untitle'. how can i fix this?
== This happened ==
Every time Firefox opened
== after norton asked me to restart my laptop. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; GTB6.5; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; eSobiSubscriber 2.0.4.16; .NET4.0C)

Hi,
Unfortunately we had a data base error today and lost some user accounts when we had to go back to our backups. If you have started this thread, your's is one of those. Since we can not recreate your account, please sign-up for a new account here to reply to the forum messages:
https://support.mozilla.org/users/auth
You can use the same username and email address as before. We are very sorry for the inconvenience.

Keep getting message pop up "Error reading/writing file "com.apple.logic.pro.cs": Logical end-of-file reached during read operation," and "The Preferences are not loaded completely. Save them to "com.apple.logic.pro.cs" anyway?" Using Logic pro 8. ???

Logic froze while I was working on something so I forced quit. Now every time I open LOGIC a message pops up that says:
"Error reading/writing file
“com.apple.logic.pro.cs”:
Logical end-of-file reached during read operation."
The only button option is cancel so I press it and another message appears that says:
"The Preferences are not loaded completely.
Do not save them, as you would overwrite the Preferences file with incomplete data."
Then when i close logic a box appears saying:
"The Preferences are not loaded completely.
Save them to "com.apple.logic.pro.cs" anyway?"
There are 3 button options to press; ok, cancel or dont save.
I press "don’t save" cuz I don't want to ruin anything.
I found a discussion located here: https://discussions.apple.com/message/9564253#9564253 that says if I delete the file "com.apple.logic.pro.cs" it will resolve the problem. If I do this will I loose or mess anything up at all, automation, saved channel strips customizations, saved effects, synth, or ultrabeat customizations etc? Or especially will I loose any work I've done? I have hundreds pieces of music files I've created. I'm scared to mess anything up with all the hours and months of work I've done. Is there anyway to fix this without loosing anything? I'm using Logic Pro 8.
Thank you

You can safely delete this file - its the preference file for control surface settings - you haven't said whether you're actually using a control surface or not, if so, you will have to set it up again. A new file will be created when you fire Logic up again, but of course it will contain default settings. If you have a complicated control surface setup, remember to keep a backup copy somewhere in case any future problems arise.
Other than that, you really have nothing to be scared about - hopefully your problem is as simple as that and there isn't an underlying problem (a corrupt hard drive, for example). You seem concerned about losing work, so I guess you want to think about backing that up on a regular basis too. If you're saving your projects to your system drive, do get an external one for this. And also check that you have plent of free space on your system drive - you need to keep about a quarter or third of it free for your OS and programs to run properly (some temporarily stored files can be quite large).

Impact on transactional Loads if Master data is not loaded

Scenario for your reference:
The loads to ZPO_LINE from PC3 was failing for past 20 days from The fix was applied on April 21.
I need help to decide the effects of not loading ZPO_LINE for past 20 days. And create a detailed plan for data loads required.
If the master data is not loaded for 20 days will it affect the transaction loads happened during those days?
And how can i find out the impact and correct the transaction data if it does?
Can any 1 help me with this?

Hi,
If i understand your scenario, you have a scenario where the Master data load has not been updated for the last 20days but, the transaction data was loaded without any interruption.
In such a scenario, the Transactional loads will only be affected if there is some field which undergoes transformation after looking up on the master data.
So, first load the master data and run the attrib change run process.
After this, if the transaction data is in full update mode, then you dont need to do anything as data will be refreshed with correct values in the next load.
If delta loads are there, you might need to performa full repair.
Regards,
Rahul

Journalised data is not loaded in Target??

Hi All,
I am new to ODI.
In journalisng Tab,I am using "Simple" as my Journalising mode and KM as "JKM oracle simple".
Using CDC, I am capturing the new and changed data(Viewed through Journal data).
But the data is not been loaded in the target.
Please give me the correct steps to Follow.
Thanks in advance.

Hi Imus,
Are you sure that the created subscriber is the same typed at interface? (it is case sensitive...)
Cezar Santos

The data is not loading in second level ODS

Similar Messages

Maybe you are looking for