The data source "....." referenced in the form template is not valid or cannot be found

Greetings,
I have an InfoPath 2013 form that uses an external data connection.  The data connection became corrupt (somehow, no one knows who changed what).  A user went in to InfoPath designer and created a new data connection and changed all references
to use that new data connection.  Now the form cannot be published at all with the error
"The data source "GetUserProfileByName" referenced in the form template is not valid or cannot be found"
The new data source they created is GetUserProfileByName2 and changed all references.
Of course, since it is broke, they asked me to see if I can find the issue.  I went through the form looking to see if they missed any references to the old data connection and can't find anything.
Where is InfoPath storing the old data connection information and where can I remote it?  I looked in the manifest and don't see it there either.
Any thoughts?
Thank you!

Hi Bob,
There are many XML schema files for the data connection, I recommend to check if the references to the XML files have been changed to the new schema files in the manifest file.
For example, if we create a data connection called GetUserProfileByName, then there will be one XML file and three XML schema files for the data connection.
Please make sure that all the references are updated in the manifest file.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Similar Messages

  • How to change the Data sources after deploying the application ??

    Hi All,
    i want to know how to change the Data sources after deploying the application to the application server ???
    I'm using Oracle Application Server 10g Release 3 (10.1.3.1.0)

    Can you access the Enrprise Manager website of the target Application Server from your location? If so, you can change the datasource in it. If not, yo can bundle the datasource definition in your archive and use that one instead of the one configured in the target OC4J container. Or this will just be the responsability of your customer: whenever you send a new WAR file, they have to modify the datasource if needed and deploy the application?

  • How to findout the data source information for the perticular tables

    Hi,
    Can you please tell me the process to findout the data source information for the perticular tables .
    For ex.. T2503 ,T2507 ,T25A1,T25A2 etc ..
    I am doing a reverse engineering to find out the data sources build on the above SAP Tables.
    Thanks.

    Hi,
    Still we haven't get the field level information ,before they send us we should first give them the corresponding data sources for the COPA tables which they have given .
    I have searched in help.sap.com but I didn't find any information on this .
    Please let me know is there any way to know the data source details for SAP Tables.
    Thanks

  • What is the data source name and the data target name for the table COSP

    Hi,
    Actaully i am new to fico/bw,and i have to create a report based on the actual and budget value and difference in the variance.
    in R/3 side the table they are using is COSP,so please let me know what is the data source name and the cube or ods name in BW side.wht are the fields in which i can get the BUDGET value in the report.
    here we are using all the business content extractors and BI content cubes and odss.
    please reply immediately as its very jurgent isssue.
    Thanks,
    ashok

    answered

  • How to make the Data Source Administrator see the 9208 ODBC instant CLient.

    I have installed the 9208 Oracle ODBC instant CLient as per the instructions in the accompanying README.txt.
    Part III: Exploding the Kit onto your system
    Expand the self-extracting archive file onto your hard drive.
    C:\> ORA9208.EXE
    Part IV: Installation Instructions
    This section assumes the following:
    1. Oracle 9.2.0.0.0 client has already been installed on your system,
    and necessary 9.2.0.8.0 patch has been applied.
    2. Part III has been completed.
    Software fixes:
    Refer to release notes (ODBCRelnotesUS.htm) for a complete list of
    Software fixes.
    Installation Instructions
    Once the self-extracting archive file ORA9208.EXE has been
    exploded it will create an directory structure as shown below on
    your hard drive.
    The directory structure after unzipping and where the files to be
    copied are shown below:
    1. a. ORA9208\bin\sqora32.dll ---> <ORACLE_HOME>\bin\
    b. ORA9208\bin\sqoras32.dll ---> <ORACLE_HOME>\bin\
    c. ORA9208\bin\sqresus.dll ---> <ORACLE_HOME>\bin\
    2. a. ORA9208\ODBC\html\ODBCRelnotesUS.htm ---> <ORACLE_HOME>\ODBC\html\
    b. ORA9208\readme.txt ---> <ORACLE_HOME>\ODBC\html\
    3. ORA9208\ODBC\mesg\oraodbus.msb ---> <ORACLE_HOME>\ODBC\mesg\
    All of the above has succeeded ok; however whilst trying to create new DSN the intsant client is not listing as an available driver. What's missing please?

    The package you downloade is not ODBC Instant Client package
    Instant Client Concept came into existence from 10.1 onwards only
    What you downloaded are the patched 9208 ODBC Drivers

  • Unable to capture the Data Source into a Transport Request

    Hi All,
    We have a product hierarchy and we are using the data source :4R_PRODH_D_LGEN_HIER for the hierarchy.
    Now we need to transport this structure to the quality environment but we were not able to capture the datasource:4R_PRODH_D_LGEN_HIER into a transport request.
    When ever we activate the data source:4R_PRODH_D_LGEN_HIER it is asking for the Package and the Transport Request Number.If we give these details and save it, data source is not getting captured in the request, only the "bject Directory Entry" is getting captured.
    Can someone please guide me on how to capture the datasource under "Data Sources in BW" in a transport request.
    Regards,
    Sachin Dehey.

    Hi Sachin,
    Hierarachy datasource is not captured as Attributes and Text Datasource. So what ever you have done is correct.
    What ever is captured in Object Directory Entry is correct. So go ahead with your transports, once transport is done check the Hierarchy Infopackage with Available OLTP hierarchies and load the data.
    Most important thing first see that the all Master & Transactional Datasources are transported in R/3 Dev to QA to PRD
    In BW, datasources are not transported, only their replica is transported.
    Transportation of Datasource is done in R/3. Only their replica is transported in BW.
    So wht ever you have done till now is correct. So go ahead.
    While attaching Hierarchy Datasource it is captured only in "Object Directory Entry"
    Regards,
    Vishnu.

  • Unable to get the data in RSA 3 for the data source 2LIS_03_BX.

    Hi Xperts,
    we are loading the data sources(2LIS_03_BX) by using MCNB transaction but not getting the data in it.
    can any one please tell me how to load the data into it with step by step process.
    regards,
    satish

    Hi,
    To see the data in RSA3 you need to do the setup of data for the particular data source through SBIW transaction.
    The Rsa3 transaction displays the data present in the setup tables of the particular data source.

  • Newly added field in the data Source not getting populated

    Hello All,
    We have added few fields in the Data Source. The Data Source is based on the InfoSet. We have included the field in the Infoset and have updated the code to fetch the value for the newly added fields.
    When we perform the test extraction for this Data Source in RSA3, the newly added fields are not getting populdated with the value. In the system generated query's selection list, the newly added fields are not selected.
    Please let mw know how to get the newly added field selected in the system generated query of the infoset.
    Regards,
    -Purnima

    Hi,
    As you said you have added the filed in Info Set. Have you included the same in data source? try if not.
    If you are trying to create a query in source system to check the data. I guess in R/3 (ECC) then you have to include the new field in slection critera (ther is an option available on top menu).
    I would suggest before creating any query go to RSO2 select the data source. Display the field structure and check if the filed is there or not. You maysee Infoset level data directly by data display from top menu. Try that optionas well to check.
    I hope it will help.
    THanks,
    S

  • Can we change the Data source in AO ?

    Hi Folks,
    Environment: SAP HANA on AO
    I have the following scenario , Am creating a report on one Calculation View: CV and have done some analysis where I have pulled in some dimensions and kept some background filters.
    Now I have to generate the same report on another Calculation View: CV2 ( Similar to structure of CV ) and compare the reports. Is there any way to edit copy the previous report and change the data source? Can you guide me on that?
    Regards,
    Krishna Tangudu

    Hi,
    You can exchange the calc view by clicking on the button next to the data source name in the tab "components", but when you do this, the new data source will overwrite the settings and filters from the previous data source. So no, there is not a supported way of exchanging the datasource and keeping the filters of the previous data source.
    Best regards,
    Victor

  • Failed to retrieve the data source in Business Objects Explorer

    I have built a universe with Designer suits and separate measurements of paramentros and bound by, ran on Web Intelligence, but when I try to use the Business Objects Explorer is reported the following message:
    Failed to retrieve the data source details.
    The creation of the data source object tree failed
    What should I do?

    There are two OSS notes about this error ;
    1411433
    1363777
    Also you can take a look at this service pack
    http://ftp1.businessobjects.com/outgoing/CMS/crXIwin_en_sp3.pdf
    cheers
    Tansu
    Edited by: tansu aksu on Jan 25, 2011 5:03 PM

  • BusinessObjects Explorer The creation of the data source object tree failed

    Hi,
    I'm trying to create a new information space in BusinessObjects Explorer 4.0.  When I select the Universe I want to use and click "New" Information Space I get the following error.
    Failed to retrieve the data source details.
    The creation of the data source object tree failed.
    I'm just using a local installation, BI Platform 4.0, Client Tools, and Explorer are all installed on my Windows 7 machine.  It's intended to be a demo environment.
    Any guidance would be appreciated!
    Jeff

    Hi Jeff,
    first of all BI4 Enterprise is not supported on Windows 7 and it may not work properly for various reasons.
    But you can give this a try:
    Update the command line parametres of each of the Explorer Services to use a different value for the connection server libraries
    The changes are made to the command line of each of the Explorer services
    - Master
    - Exploration
    - Indexing
    - Search
    Remove the following from the command line parameters of the existing Explorer services
    -connectivity_dir "C:/Program Files (x86)/SAP BusinessObjects/SAP BusinessObjects Enterprise XI 4.0//dataAccess/connectionServer"
    Example of the original Explorer Master server command line parameters:
    -Djava.awt.headless=true -Dosgi.configuration.area=configuration.BI40.ExplorerMasterServer1 -server -XX:MaxPermSize=256m -Dosgi.clean=true -Xmx1g -jar plugins/org.eclipse.equinox.launcher_1.0.101.R34x_v20081125.jar -loggingPath "C:/Program Files (x86)/SAP BusinessObjects/SAP BusinessObjects Enterprise XI 4.0/logging/" -connectivity_dir "C:/Program Files (x86)/SAP BusinessObjects/SAP BusinessObjects Enterprise XI 4.0//dataAccess/connectionServer" -serverkind explorerMaster
    And update the server command line parameters with the following:
    "-Dbusinessobjects.connectivity.directory=C:/Program Files (x86)/SAP BusinessObjects/SAP BusinessObjects Enterprise XI 4.0//dataAccess/connectionServer"
    Example of an updated Explorer Master server command line parameters:
    -Djava.awt.headless=true -Dosgi.configuration.area=configuration.BI40.ExplorerMasterServer -server -XX:MaxPermSize=256m -Dosgi.clean=true -Xmx1g -jar plugins/org.eclipse.equinox.launcher_1.0.101.R34x_v20081125.jar -loggingPath "C:/Program Files (x86)/SAP BusinessObjects/SAP BusinessObjects Enterprise XI 4.0/logging/" -Dbusinessobjects.connectivity.directory="C:/Program Files (x86)/SAP BusinessObjects/SAP BusinessObjects Enterprise XI 4.0//dataAccess/connectionServer" -serverkind explorerMaster

  • Replicating the data source

    Hi,
    I have an attribute data source and when I have replicated the data source again from the source system, the type has changed from attribute to hierarchy.
    Can you please tell me how can this happen and what needs to be done to revert it back to attribute data source.
    Regards,
    Harikiran Gunnala

    Hi Hari,
    it cannot change automatically like hierarchy........See    for....another...data source,which data source ended with _ATTR......................
    Hope it helps
    Regards
    chandra sekhar

  • Where is the data source configuration in Jdev 11g?

    Does anybody know where is the data source configuration in JDeveloper 11g? I want to create a JNDI data source using the database connection. Do I have to login the Integrated WLS to create the data source? Thanks.

    Hi Chris,
    Configuring the data source in Integrated WLS works for me. Thanks for your help!
    Looks 11g didn't create the data source automatically in the App Navigator. I checked the deployed application directory - "Application Data\JDeveloper\system11.1.1.2.36.55.36\o.j2ee\drs\TestDS\adf\META-INF" and "Application Data\JDeveloper\system11.1.1.2.36.55.36\o.j2ee\drs\TestDS\META-INF". I didn't find the data source file - data-sources.xml. Then I started the web application and checked the Context, I can only find the data source which I defined in the Integrated WLS. It is interesting that 11g removed the JNDI list from the RMI bindings.
    Also thanks to Nick for the information. We are migrating a Spring Framework application to Oracle and don't use ADF Business Components in this project.
    Huaichen

  • How to use two RFC models in one Data Source for a Interactive Form UI Elem

    Hi
    I want to use two RFC models (two Function Modules from a SAP Backend system) in one context node of a View Controller in order to pass it as the data source to a Interactive Form UI element. Can I use the data binding mechanism directly or have I to copy the data into a Value Node within the view controller.
    Thanks for helping
    René Morel
    SAP (Schweiz) AG

    Rene,
    You can create a local context node in component controller and copy the data from both the RFC's to this node, then bind it to the view controller. Then you can make this view context node as the datasource of the interactive form.
    Regards,
    Anand

  • Exception Message: The form cannot connect to the data source. Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'

    When opening a form in SharePoint 12013 that was created from Infopath 2013, I get the following error.
    You do not have permissions to access a database that contains data required for this form to function correctly.
    An entry has been added to the Windows event log of the server.
    Log ID:5566
    When I go to the log files on the SharePoint server. I see the following error.
    Exception Message: The form cannot connect to the data source. Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'
    I am guessing this has something to do with the UDCX connection and the database.
    Can anyone help me get this fixed?

    Hi Jim,
    Please check the following kb article when it occurs 5566errro with the UDCX conection file, try the method of using the Secure Store Service to store alternate credentials for the data connection method, or the method of stating the credentials
    in the UDC file explicitly.
    Also check if it could help with setting sql server as "SQL Server and Windows Authentication mode".
    http://support.microsoft.com/kb/981684
    Thanks
    Daniel Yang
    TechNet Community Support

Maybe you are looking for

  • Having Trouble With E-mails That Involve Animation

    This is too weird. When I receive an e-mail that has animation in it it comes through freeze framed in Mail. It does not matter if it is in my .Mac account or Verizon account. Just for the heck of it I forwarded it to myself using the Verizon account

  • Presence of multiref tag in soap response message

    We are having a problem when we try to call a web service in PI. The web services called is provided by an Axis server. We tried to use the plain HTTP protocol in the definition of the communication channel as shown here: Adapter type: SOAP Transport

  • Linking to a relative path in FLASH CS6

    I am making a site for a school project.  I am worried once I move onto the next project, someone will move my files and screw up my FLV links.  How do I go about linking my videos with a relative path so the FLVs actually play?

  • Can't activate my iphone after I restored it

    I got a message today saying there was an update.  I got on itunes to try and do the updated and it said there was an error and I had to restore my iphone.  I restored my phone but it said it could not activate it.  I tried restoring it a couple time

  • Add fields if required by the customer

    Hello Need to capture mulitple profiles in a single form. Customer should be able to add n number of profiles. That is after adding one profile, an option to add another profile form and fill up.  Don't want to send a 5-10 page long form with the sam