The database is at release 8.52. The PeopleTools being run require database

Created a DEMO system using PeopleTools 8.51 and HCM 9.0 . Connecting through Application Designer shows the message 'The database is at release 8.52. The PeopleTools being run require databases at release 8.51.
Do I need to run rel851.sql to change the level of database to 8.51 from 8.52 ???
Thanks,
Venu.

Hi,
You have downloaded HCM Revision 5, which is deliverd with PeopleTools 8.52.03.
Oracle is delivering revision recuts of applications now a days, instead of one release per applications.
Whant to know more about revision recuts, see following
http://www.youtube.com/watch?v=1zE4aOobdr0
Running the rel script, will upgrade you PeopleTools, you cannot downgrade.
You will have to install PeopleTools 8.52.03.
Also see the readme on eDelivery on HCM 9.0
PeopleSoft Human Capital Management and Campus Solutions 9.0 – Revision 5: This part (number V30469-01) has replaced the PeopleSoft Enterprise Human Resources Management System (HRMS) and Campus Solutions 9.0 media (part number B34591-01), the PeopleSoft Enterprise Human Resources Management System and Campus Solutions 9.0 - Revision 1 media (part number V20635-01) and the PeopleSoft Enterprise Human Resources Management System and Campus Solutions 9.0: Feature Pack – March 2011 media (part number V24852-01). New installations of PeopleSoft Human Capital Management and Campus Solutions 9.0 should use this part. If you have already installed the original HRMS and Campus Solutions 9.0 (part number B34591-01) media, Revision 1 (part number V20635-01) media, or Feature Pack - March 2011 (part number V24852-01) media, you should install the Maintenance Packs or bundles available on My Oracle Support; you should not install this part. The PeopleSoft Human Capital Management and Campus Solutions 9.0 – Revision 5 media includes all maintenance posted through December 27, 2011 (up to PeopleSoft HCM and CS Maintenance Pack 13, PeopleSoft HRMS Bundle #18, PeopleSoft Campus Solutions Bundle #23, PeopleSoft Payroll Tax Update 11-F, and Global Payroll Update 2011-F). If you install this media, you do not need to separately install these maintenance packs or bundles. All installs of HCM and Campus Solutions 9.0 – Revision 5 require PeopleTools 8.52.03 or higher*. Please check the upgrade documentation for the PeopleTools requirements for your specific upgrade path. For additional information on PeopleSoft Feature Packs, please go to My Oracle Support.
Regards,
Hakan

Similar Messages

When will the firmware update for the Note 4 be released to support the Gear VR?

I will need to look at purchasing on another device on another carrier depending on timing. (Cross checking the Oculus and Samsung dev boards as well)

Mihos wrote:
Note 4 update just showed up for my phone a few minutes ago. Installing now. They really need to communicate these things with the support agents so they can communicate better with us. We need information to make decisions. I can say right away, a Verizon device will never be my lead platform for development for this reason alone. Especially when the script for response leads to a link to a page that has nothing to do with phones, much less firmware update information. This is, in fact, the NJ5 update, so it should work, I will verify for the support techs and the community when I get back to the lab. (I eat lunch sometimes, contrary to popular belief.) Thanks for whoever prioritized this internally.
Apparently it was JUST released. http://www.droid-life.com/2014/12/10/verizon-galaxy-note-4-update-vru1anj5/

Has the official Photoshop CS6 release changed from the beta version?

That's it really. Are there any substantial differences or changes in the official release?

It should look the same to the users. No big new features were added, just some bug fixes.
Pattie

Has the AVG update been released yet for the missing library issue...

does anybody know?
I'm disabling AVG at present due to it constantly removing my library and playlists, it was rumoured to be released, well a hotfix, over the weekend, can anybody clarify?
I'm on the AVG free edition by the way
Cheers

MSE should be a set & forget solution. Like any AV it may still miss newly released viruses so it is up to you to make sensible choices when browsing the web and backup your data against a disaster.
See this post for the iTunes library recovery strategy. A recent .tmp file may give better results than an older .itl file. You shouldn't need to download anything from the cloud as it should all still be on your computer.
tt2

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
Anyone have an idea on other things to try to debug/resolve this?
Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
Thanks!

After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me.

CANCEL PR release as per the sequence

Hi
We have two levels of release for PR, the first level is release and then the release goes to second level and the second level release takes place. This is working fine
But when the user cancels the release. The cancel release for both the levels taking place when the first level user is cancelling the release.
My user want the cancel release should also take in sequence that is the second level has to cancel the release and the first level.
Iam not finding any authorisation object for release cancel. i also trie dwith release indicator not changeable but not happening.
Kinldy let me know if any one have a solution for the same.
chris
Edited by: CHRIS MM on Jun 30, 2009 6:35 PM
Edited by: CHRIS MM on Jun 30, 2009 6:35 PM

Dear,
have you checked your assignment in release group-Release code -plant-Agent ID are assigned properly or not..
Check this in:
Spro-Materials Management-Purchasing-Purchase Requisition-Release Procedure-Procedure with Classification-Set Up Procedure with Classification-Workflow..
Here check , i think your all users are assigned for all tracking numbers here.
Also check your tracking number assignment in the release strategies, whether it is assigned properly or not.
reagrds
Utsav

Available Now: Oracle Database Lite 10g Release 1

The Oracle Database Lite development team is pleased to announce the availability of Oracle Database Lite 10g (10.0.0.0.0) for Windows 2000/XP, Solaris 2.6, 2.7, 2.8, and Red Hat Enterprise Linux AS/ES 2.1/3.0 platforms.
The Windows release is currently available from OTN at:
http://www.oracle.com/technology/software/products/lite/index.html
Oracle Database Lite 10g is a complete and integrated solution for rapid development and deployment of high impact, mission vital applications for mobile and lightweight embedded environments. Oracle Database Lite is an extension to Oracle Database 10g for enterprises wanting to increase productivity, reduce operational costs, and improve customer satisfaction.
Oracle Database Lite uses data synchronization to reliably and securely exchange data between a corporate Oracle Database and mobile workers. Oracle Database Lite also allows companies to deploy and manage users, mobile applications and devices from a remote central location. Oracle Database Lite provides the necessary framework enterprise customers need to extend their enterprise applications and data to the most popular mobile platforms: Palm OS, Linux, Microsoft Windows CE/PPC, and Microsoft Windows NT/2000/XP/UNIX.
The following is a partial list of new features for Oracle Database Lite 10g that will make your mobile deployment easier to manage, use, and develop. A complete list will be available for download/viewing soon.
Device Management
As the number of mobile devices in an enterprise increases, it becomes more important to have complete control of the devices. Oracle Database Lite Device Management is a complete infrastructure to monitor and manage Oracle Database Lite assets such as database files, software libraries, data, and application files on remote devices. Device management decreases the total cost of ownership and protects an enterprises intellectual property.
Single Oracle Lite Binary
The Oracle Database Lite 10g release contains a single set of Oracle Lite database kernel binaries for all languages, removing the necessity of having different binaries for each of the following languages: Korean, Traditional Chinese, simplified Chinese, Japanese, and US/European languages.
Shared Map
The shared map function greatly improves performance by reducing sync processing timeand enhances the scalability of shared publication items. Shared maps allow users to share record state information and reduce the size of the resulting replication map tables.
Offline Instantiation
Offline instantiation enables quick and easy setup of mobile devices for business applications. Mobile administrators are able to prepare, in batch mode, a client package, which includes the mobile client software and initial data for every mobile user. This procedure helps users avoid an expensive online synchronization processes as part of the first time mobile client setup procedure.
Synchronization Manager
The Synchronization Manager is a complete, web-based enterprise management application to manage and monitor synchronization. The Synchronization Manager allows administrators to manage the synchronization service, monitor and analyze sync performance, administer the configuration, trace synchronization history, display and browse synchronization publication and subscription information, and monitor MGP (Message Generator and Processor) performance.
Oracle Application Server Support
The Oracle Database Lite 10g Mobile Server now runs as a web application on Oracle Containers for Java (OC4J) the runtime of Oracle Application Server. If Oracle
Database Lite 10g is deployed in standalone mode, an embedded version of OC4J will be installed and used. Oracle Database Lite may also be installed against an existing instance of Oracle Application Server.
Seamless upgrade from Oracle9 i Lite 5.0.2
The Oracle Database Lite 10g Upgrade Assistant allows customers to easily upgrade from existing Oracle9 i Lite 5.0.2 installations. The Upgrade Assistant automatically converts existing application definitions to the new format, and copies all relevant files to the new installation. As many customers have deployed mission critical systems using Oracle9i Lite technology, the Upgrade Assistant has been designed to minimize system downtime.
Download
Oracle Database Lite 10g (10.0.0.0.0) for Windows can now be downloaded from the following location.
http://www.oracle.com/technology/software/products/lite/index.html

I am using Oracle 10g lite. Do you know if it supports silent installation.

Database schema SCM does not contain the associated database objects

I am getting the following error when i am trying to migrate the form to apex using application migration.
"*Database schema SCM does not contain the associated database objects for the project, aafs.*
*Ensure the database schema associated with the project contains the database objects associated with the uploaded Forms Module .XML file(s).* ".
Actully i am having one schema which i named as SCM, and i have defined one table TT.
I created one form test.fmb in which i used TT table.its compiled successfully.
Then i generated the xml file using frmf2xml from fmb file. After that, I created the project in appication migration wizard in SCM schema.
Project creattion is working fine.but when i m trying to create application,it is showing me above error.
can any one help in solving this problem.

Hi Hilary,
Thanks for your response/feedback.
1. The schema associated with the project does not contain the necessary objects Can you please verify that the schema associated with your Forms conversion project does in fact contain the objects associated with the uploaded files. Could you also verify that the object names referenced in the error message do not exist within the schema associated with your workspace. Ensure that the schema associated with the project contains the necessary database objects before proceeding to the generation phase of the conversion process.
Ans:
Yes it does contain the objects (See results from SQL query Commands below):
SELECT MWRA_CONTRACT_NO, OLD_CONTRACT_NO FROM PROJECTS@CONTRACT_LX19.MWRA.NET
ORDER BY MWRA_CONTRACT_NO
000000569 551TA
000000570 553TA
000000575 560TA
000000576 561TA
000107888 502TA
000108498 500TA
000108502 503TA
2. The block being converted contains buttons, which may have been incorrectly identified as database columns, and included in the original or enhanced query associated with your block This is a known issue ,bug 9827853, and a fix will be available in our upcoming 4.0.1 patch release. Some possible solutions to this issue are:
-> delete the buttons before generating the XML
-> delete the button tags from the XML
-> add "DatabaseItem=No" for the button in the XML file before importing it in Apex.The button is excluded when creating the Application.
Ans
yes it does contain push buttons to transfer to another forms and these are defined as Non data base items. Parial XML code provided below:
- <Item Name="REPORTS" FontSize="900" DirtyInfo="true" Height="188" XPosition="4409" FontName="Fixedsys" ForegroundColor="black" DatabaseItem="false" Width="948" CompressionQuality="None" YPosition="3709" FontSpacing="Normal" Label="REPORTS" BackColor="canvas" FillPattern="transparent" ShowHorizontalScrollbar="false" FontWeight="Medium" ShowVerticalScrollbar="false" FontStyle="Plain" ItemType="Push Button">
<Trigger Name="WHEN-BUTTON-PRESSED" TriggerText="GO_BLOCK('REPORT_1');" />
</Item>
- <Item Name="TRACKHDR" FontSize="900" DirtyInfo="true" Height="188" XPosition="3409" FontName="Fixedsys" ForegroundColor="black" DatabaseItem="false" Width="948" CompressionQuality="None" YPosition="3709" FontSpacing="Normal" Label="TRACK" BackColor="canvas" FillPattern="transparent" ShowHorizontalScrollbar="false" FontWeight="Medium" ShowVerticalScrollbar="false" FontStyle="Plain" ItemType="Push Button">
<Trigger Name="WHEN-BUTTON-PRESSED" TriggerText="GO_BLOCK('TRACKHDRS');" />
</Item>
- <Item Name="SUBAWRD" FontSize="900" DirtyInfo="true" Height="188" XPosition="2429" FontName="Fixedsys" ForegroundColor="black" DatabaseItem="false" Width="948" CompressionQuality="None" YPosition="3719" FontSpacing="Normal" Label="SUBAWARDS" BackColor="canvas" FillPattern="transparent" ShowHorizontalScrollbar="false" FontWeight="Medium" ShowVerticalScrollbar="false" FontStyle="Plain" ItemType="Push Button">
3. If you are still experiencing issues, then please create a testcase on apex.oracle.com and update this thread with the workspace details so I can take a look.
Test case details are given below. It was created per ORACLE for open Service Request Number 3-1938902931 on ORACLE Metalink.
Workspace: contract4
username: [email protected] (my email)
Password: contract4
Comments:
For my migration/testing purpose a dabatase link and synonyms have been setup by our ORACLE DBA. Could this be causing this problem?
Do we know when the fix 4.0.1 patch release will be available?
Thanks for your help.
Indra

IDS10g and Oracle 9i Release 2 on the same windows XP or NT machineo

I want to use Oracle 9i Enterprise Ed.Release 9.2.0.1 as Database and iDS 10g to develop a Database application,the twice on the same Windows XP machine.I was confused when trying to install the Repository 9i for SCM 9.0.4.3.14c and when reading the System Requirements in the Oracle SCM Repository Installation Guide to understand that to develop on the same machine I could just use Database 9i Enterp.Ed Release 9.2.0.2 using just Windows NT.
Question:
-Is that true?
-Can I use the Oracle Database 9i Release 9.2.9.0.1 or 9.2.0.2 and iDS 10g on the same windows XP machine to develop my application and not Windows NT 4.0?
Thanks for reading and for your response!

Hello Sir Russel,
Thank you very much for your Response.I have to say to excuse me for the quality of my Englich because I speak German and french Language better.
I'm not using Oracle 10g because it was told me that iDS10g is not for the time supported by Oracle 10g.
So I'm using iDS10g and Oracle 9iRelease2.
I already knew the link you send for the Installation of the reposity and it is exactly there, where I have the problem with :[WINDOWS NT ONLY ]:In the System Requirements it is wrote:
The client workstation(iDS 10g) and the database server(Oracle 9i) can be on the same machine [WINDOWS NT ONLY ]:So can I use Windows XP professional like I want instead of Windows NT or should I use windows NT 4 because of installing Oracle 9i and iDS10g on the SAME MACHINE?
Thank you very much for responding.
http://download-east.oracle.com/otn_hosted_doc/designer/doc_library/releases_6i48_9026/CDOC72/cmnhlp72/rep_insgde/igrepos_9i.htm
Christian. OTN

Stop database instances and restart server without the databases to start.

We run Oracle database-server 10 enterprise edition release 10.2.0.4.0 64 bit pl/sql release 10.2.0.4.0 production.
How do i restart the servet without the databases to restart f. eks using enterprise manager.

I think what you need to do is go into the oratab file and mark each database set to be started automatically on boot up to not be set to auto-start. When done doing whatever you are doing now you would need to reset the indicator to Y. I do not think you would do this via EM.
We have all our database set to not auto-start and have our own start scripts that run a series of startup action scripts. This was for our system administrators who did not want Oracle in the way when they applied patches or made hardware changes that required re-booting and the start-up action scripts load and pin large objects into the shared pool on startup before the database is in use by the applications.
HTH -- Mark D Powell --

To show the release status of the transport request

Hello Experts,
I am having a requirement like the following:
I need to list the transports along with the release status of the transport request in a View.
Release status means that transport request imported into Development system, Quality system and Production system.
Which table will hold this information?
I have checked with E070. But i dont know how to find in that. Or any other table is there to do this?
Thanks and Best Regards,
Suresh

Hello Kalyan,
I dont know how to find my request in TMSBUFTXT.
For example i am having a TR now in Dev system: XXX45678.
If i have imported it to Quality system, then how to find this entry?
Or if i have imported it to Production system, then how could i find that the TR XXX45678 is now in Production system.
Since i am creating a View, i need the information that in which Database Table this entry will be stored.
I dont want Function module name.
Best Regards,
Suresh

DB13 backup failed and strucked on the start(9999) not release to (0005)

Dear All,
We r using HP-UX -- OS for SAP system 4.7 . We run backup process by DB13 TC.
On the last friday as a backup schedule i had fired the online backup and due to the below issue the backup aborpted
BR0204I Percentage done: 64.38%, estimated end time: 18:34
BR0001I ********************************__________________
BR0280I BRBACKUP time stamp: 2010-12-17 16.52.47
BR0301E SQL error -12540 at location BrDbConnect-2
ORA-12540: TNS:internal limit restriction exceeded
BR0310E Connect to database instance P3P failed
BR0311E Connect to database instance P3P during online backup failed
BR0280I BRBACKUP time stamp: 2010-12-17 16.52.49
BR0301E SQL error -12540 at location BrDbConnect-2
ORA-12540: TNS:internal limit restriction exceeded
BR0310E Connect to database instance P3P failed
BR0115I Compression rate for all files 5.3048:1
BR0056I End of database backup: beeunzod.ant 2010-12-17 16.52.47
BR0280I BRBACKUP time stamp: 2010-12-17 16.52.49
BR0054I BRBACKUP terminated with errors
and then as a scheduled i runs the offline backup on the PRD server on the night 12:00 AM on the same day it too aborpted by below issue ....
BR0278E Command output of '/oracle/P3P/920_64/bin/sqlplus':
SQL*Plus: Release 9.2.0.6.0 - Production on Sat Dec 18 00:01:35 2010
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
SQL> Connected.
SQL>
SQL> ORA-01149: cannot shutdown - file 2 has online backup set
ORA-01110: data file 2: '/oracle/P3P/sapdata3/p3p_1/p3p.data1'
SQL> Disconnected from Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production
With the Partitioning option
JServer Release 9.2.0.6.0 - Production
BR0280I BRBACKUP time stamp: 2010-12-18 00.01.37
BR0279E Return code from '/oracle/P3P/920_64/bin/sqlplus': 0
BR0302E SQLPLUS call for database instance P3P failed
BR0309E Shutdown of database instance P3P failed
BR0056I End of database backup: beeuqbyk.fft 2010-12-18 00.01.37
BR0280I BRBACKUP time stamp: 2010-12-18 00.01.37
BR0054I BRBACKUP terminated with errors
and came to know that the DB backup of the online is strucked with the memory bottle neck and it got strucked now i am unable to run the backup of the prd server untill unless the backup of the online is got to the state of 0005 to 9999
and today morning i tried to run again the online backup and aborpted with the below issue
BR0319I Control file copy created: /oracle/P3P/sapbackup/cntrlP3P.dbf 6791168
BR0328E Database file /oracle/P3P/sapdata3/p3p_1/p3p.data1 of tablespace PSAPP3P is already in backup status
BR0328E Database file /oracle/P3P/sapdata3/p3p_2/p3p.data2 of tablespace PSAPP3P is already in backup status
BR0328E Database file /oracle/P3P/sapdata3/p3p_3/p3p.data3 of tablespace PSAPP3P is already in backup status
BR0328E Database file /oracle/P3P/sapdata3/p3p_4/p3p.data4 of tablespace PSAPP3P is already in backup status
BR0328E Database file /oracle/P3P/sapdata4/p3p_5/p3p.data5 of tablespace PSAPP3P is already in backup status
BR0328E Database file /oracle/P3P/sapdata4/p3p_6/p3p.data6 of tablespace PSAPP3P is already in backup status
BR0328E Database file /oracle/P3P/sapdata4/p3p_7/p3p.data7 of tablespace PSAPP3P is already in backup status
BR0328E Database file /oracle/P3P/sapdata4/p3p_8/p3p.data8 of tablespace PSAPP3P is already in backup status
BR0328E Database file /oracle/P3P/sapdata4/p3p_9/p3p.data9 of tablespace PSAPP3P is already in backup status
BR0328E Database file /oracle/P3P/sapdata4/p3p_10/p3p.data10 of tablespace PSAPP3P is already in backup status
BR0328E Database file /oracle/P3P/sapdata1/p3p_11/p3p.data11 of tablespace PSAPP3P is already in backup status
BR0328E Database file /oracle/P3P/sapdata1/p3p_12/p3p.data12 of tablespace PSAPP3P is already in backup status
BR0328E Database file /oracle/P3P/sapdata1/p3p_13/p3p.data13 of tablespace PSAPP3P is already in backup status
BR0328E Database file /oracle/P3P/sapdata4/p3p_14/p3p.data14 of tablespace PSAPP3P is already in backup status
BR0328E Database file /oracle/P3P/sapdata3/p3p_15/p3p.data15 of tablespace PSAPP3P is already in backup status
BR0328E Database file /oracle/P3P/sapdata3/p3p_16/p3p.data16 of tablespace PSAPP3P is already in backup status
BR0328E Database file /oracle/P3P/sapdata3/p3p_17/p3p.data17 of tablespace PSAPP3P is already in backup status
BR0328E Database file /oracle/P3P/sapdata4/p3p_18/p3p.data18 of tablespace PSAPP3P is already in backup status
BR0328E Database file /oracle/P3P/sapdata4/p3p_19/p3p.data19 of tablespace PSAPP3P is already in backup status
BR0328E Database file /oracle/P3P/sapdata3/p3p_20/p3p.data20 of tablespace PSAPP3P is already in backup status
BR0328E Database file /oracle/P3P/sapdata3/p3p_21/p3p.data21 of tablespace PSAPP3P is already in backup status
BR0328E Database file /oracle/P3P/sapdata3/p3p_22/p3p.data22 of tablespace PSAPP3P is already in backup status
BR0056I End of database backup: beevcmuf.ant 2010-12-20 12.38.44
BR0280I BRBACKUP time stamp: 2010-12-20 12.38.44
BR0054I BRBACKUP terminated with errors
please help me..........
thanks in advance
regards,
praveen kumar
Edited by: praveenkumarbabji kandula on Dec 20, 2010 1:17 PM

dear gagan,
the output of the given commands are
SQL*Plus: Release 9.2.0.6.0 - Production on Mon Dec 20 13:36:46 2010
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
SQL> connect /as sysdba
Connected.
SQL> select status from v$backup;
STATUS
NOT ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
NOT ACTIVE
STATUS
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
STATUS
NOT ACTIVE
NOT ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
STATUS
ACTIVE
ACTIVE
ACTIVE
ACTIVE
37 rows selected.
SQL>
thanks for ur response
regards,
praveen kumar

VTO-4400 No database has been discovered. please use the enterprise managem

Hi,
I am new to Oracle Enterprise Manager. I just installed Oracle8i on Windows 2000 Server. I am connecting to OEM as sysman. When i try to open database applications (e.g. Tools - Database Applications - DBA Studio) from Oracle Enterprise Manager, it gives error:
VTO-4400 No database has been discovered. please use the enterprise management console to discover atleast one database before starting the application.
Can anybody tell me how to connect to the database?
Thanks,
Prutha

Having said all that, a colleague has suggested we just limit the amount of RAM available for the EX2010 DB cache
Then it won't have to start releasing RAM when the backup runs, and won't throw SCOM alerts
This attribute should do it...
msExchESEParamCacheSizeMax
http://technet.microsoft.com/en-us/library/ee832793.aspx
Give me a shout if this is a bad idea
Thanks

Release strategy on the PO

Dear MM Gurus,
I tried to create a release strategy following the procedures per IMG, but my problem was that there was no display of that release strategy on the PO. What is the usual cause of this problem?
Regards,
Aktolga

Hi,
First, please kindly check note 365604 point 2(b).
b) The characteristics must be entered as they are specified on the
   database, that is, the item category must be entered in the
   internal format, for example (value 0-9), cost centers or
   material numbers must be entered with leading zeros..."
You can use transaction CL30N search for an object using the data
of the purchase requisition/purchase order. Here, it is important
that the object search determines exactly one strategy. If this
is not the case, this indicates that there are overlapping
strategies in the system or that the release strategies in
Customizing do not correspond with those from transaction CL24.
See the previous point. If the object search returns more than
one result, the system subsequently determines an incorrect
release strategy or no release strategy at all." Please check knowledge based article
1497235 .
Regards,
Ashwini.

Error while running the root.sh script during Grid installation on a pre-installed 11g database .

Hi Oracle Experts,
I am trying to setup a new GRID Standalone Infrastructure on a previously installed Oracle 11g database.
It runs all fine but when prompts to run the root.sh script it does not allow to proceed as it prompts to overwrite the existing path for /usr/bin/local
well, I google'd and tried with overwrite : Y . It prompted to run the script but it failed ...
Could you please help me on this ..
[root@asm ~]# /u01/app/11.2.0/grid/root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
    ORACLE_OWNER= oracle
    ORACLE_HOME= /u01/app/11.2.0/grid
Enter the full pathname of the local bin directory: [/usr/local/bin]:
The file "dbhome" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: y
   Copying dbhome to /usr/local/bin ...
The file "oraenv" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: y
   Copying oraenv to /usr/local/bin ...
The file "coraenv" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: y
   Copying coraenv to /usr/local/bin ...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
To configure Grid Infrastructure for a Stand-Alone Server run the following command as the root user:
/u01/app/11.2.0/grid/perl/bin/perl -I/u01/app/11.2.0/grid/perl/lib -I/u01/app/11.2.0/grid/crs/install /u01/app/11.2.0/grid/crs/install/roothas.pl
[root@asm ~]# /u01/app/11.2.0/grid/perl/bin/perl -I/u01/app/11.2.0/grid/perl/lib -I/u01/app/11.2.0/grid/crs/install /u01/app/11.2.0/grid/                              crs/install/roothas.pl
2015-03-18 01:42:25: Checking for super user privileges
2015-03-18 01:42:25: User has super user privileges
2015-03-18 01:42:25: Parsing the host name
Using configuration parameter file: /u01/app/11.2.0/grid/crs/install/crsconfig_params
Creating trace directory
LOCAL ADD MODE
Creating OCR keys for user 'oracle', privgrp 'oinstall'..
Operation successful.
CRS-4664: Node asm successfully pinned.
Adding daemon to inittab
CRS-4123: Oracle High Availability Services has been started.
ohasd is starting
acfsroot: ACFS-9320: Missing advmutil.
acfsroot: ACFS-9320: Missing advmutil.bin.
acfsroot: ACFS-9320: Missing fsck.acfs.
acfsroot: ACFS-9320: Missing fsck.acfs.bin.
acfsroot: ACFS-9320: Missing mkfs.acfs.
acfsroot: ACFS-9320: Missing mkfs.acfs.bin.
acfsroot: ACFS-9320: Missing mount.acfs.
acfsroot: ACFS-9320: Missing mount.acfs.bin.
acfsroot: ACFS-9320: Missing acfsdbg.
acfsroot: ACFS-9320: Missing acfsdbg.bin.
acfsroot: ACFS-9320: Missing acfsutil.
acfsroot: ACFS-9320: Missing acfsutil.bin.
acfsroot: ACFS-9301: ADVM/ACFS installation can not proceed:
acfsroot: ACFS-9302: No installation files found at /u01/app/11.2.0/grid/install/usm/EL5/x86_64/2.6.18-8/2.6.18-8.el5xen-x86_64/bin.
asm     2015/03/18 01:43:06     /u01/app/11.2.0/grid/cdata/asm/backup_20150318_014306.olr
Successfully configured Oracle Grid Infrastructure for a Standalone Server
when I checked for ASM instance its not running ... but just ohasd service and nothing else ..
[root@asm grid]# ps -ef | grep pmon
oracle    5831     1 0 01:15 ?        00:00:01 ora_pmon_db11g1
root     12625 8794 0 02:30 pts/2    00:00:00 grep pmon
[root@asm grid]#
[root@asm grid]#
[root@asm grid]# ps -ef | grep d.bin
oracle   12643     1 5 02:30 ?        00:00:00 /u01/app/11.2.0/grid/bin/ohasd.bin reboot
root     12715 8794 0 02:30 pts/2    00:00:00 grep d.bin
[root@asm grid]#
Could you please help .

hi,
The issue not with /usr/bin/local. When you excute root.sh, it will try configure the ASM with New GRID HOME. Issue started, whent tried to start
CRS-4123: Oracle High Availability Services has been started.
ohasd is starting <<=================================================================
acfsroot: ACFS-9320: Missing advmutil.
Please let us know the below details
==> Acfs is configured the servers??
     ==>acfsutil registry
               acfsutil info fs output.
==> With out ASM instance , How the database, CRS STarted ???
==> Please try stop and start the crs.
==> crsctl query crs activeversion output
Regards
Krishnan

The database is at release 8.52. The PeopleTools being run require database

Similar Messages

Maybe you are looking for