The database migration report don't show all the erros at creation time

Hello experts,
I'm using omwb to migrate a sql server database, i realize that at creation of oracle model there are few stored procedures that was not created.. those object doesn't appear in the Errors_and_Warnings_report.htm but in the logs. My question is why the report don't show those objects?
Another question: how to list the objects that the tool was unable to create in the oracle model?
best regards

HHerrera,
Are the stored procedures that were not created, but were not in the in the Errors_and_Warnings report, visible in oracle, i.e. is the text available in Oracle? If so, it would be easy to compile all the objects in your schema and do a select to see which stored procedures were invalid.
Regards,
Turloch

Similar Messages

BI publisher report is not showing all the data

Hi All,
I have created a report using BI Publisher in R12. The report is not showing all the records.
I have checked the result XML it is also not having all the data. My query returns 846 rows but my report only has 662 rows.
what might be the issue.please give me some idea to resolve this issue.
Thanks in advance.
Regards,
P.Kalidoss

Hi Arun,
In the following code: public SelectItem[] getAllPrinters() {
if (allPrinters == null) { // allPrinters is not defined. what type of object it is
PrintService[] printers = PrintServiceLookup.lookupPrintServices(null, null);
allPrinters = new SelectItem[printers.length];
for (int i = 0; i < printers.length; i++) {
SelectItem printer =
new SelectItem(printers.getName(), printers[i].getName());
allPrinters[i] = printer;
return allPrinters;;;
Variable allPrinters is not defined. what type of object it is?
And also the same variable is referenced here <af:selectOneChoice label="Available Printers" partialTriggers="cb1"
value="#{pageFlowScope.applicationPrinterBean.selectedPrinter}"
id="soc1"
autoSubmit="true">
<f:selectItems value="#{pageFlowScope.applicationPrinterBean.allPrinters}" id="si1"/>
</af:selectOneChoice>.
Thanks.

My i-tunes Wish List only shows the first page, it used to show all the pages- like the next page button is disconnected?

My i-tunes Wish List only shows the first page- it used to show all the pages. Its a little like the next page button is disconnected?
Any ideas?
thanks
Simon

I would say all types. Any kind of document/ file that has multiple pages, I can't get to the next page.

Performance monitor reports and graphs don't show all the counters that were captured

I've run into an odd behavior of performance monitor that I haven't been able to clear up yet: after I run a data collector set, the resulting report only shows a partial list of the counters that I captured, and so does the graph of that report (but different
items).
For instance, I chose the following counters for the data collector set:
\PhysicalDisk(*)\% Idle Time
\PhysicalDisk(*)\Avg. Disk Queue Length
\PhysicalDisk(*)\Avg. Disk sec/Read
\PhysicalDisk(*)\Avg. Disk sec/Write
When the data collection ends, the report that gets displayed shows all those counters for _Total instance and C:, but then E: only shows % Idle Time and Avg. Disk Queue Length. That's it, the report ends there, even though I also have F: and V: drives on
this server.
If I choose to view the graph of this data collection, it only shows those four counters for the _Total instance.
It took me a while to realize that all the data is being captured, but it's just the display that is truncated. If I view the folder then open the report.html, it actually shows all the data. Same with the graphs. If I select to add counters and add
all the missing counters, they are displayed.
I have searched high and low but haven't been able to find more than one post at ServerFault where someone had a similar issue, but no real solution or cause was provided, so I was hoping that someone here might have an idea.
I also found a variety of articles about missing counters due to registry settings or because the counters needed to be reset, but that's a different issue that doesn't apply in my case. By the way, this is on a windows server 2012 R2 VM (file server).

Hi SomeAdmin,
The counter missing often caused by the related registry value is corrupted, please first refer the following related KB then perform a fix then monitor the issue again.
Event ID 3012 — Performance Counter Loading
http://technet.microsoft.com/en-us/library/cc775053(v=ws.10).aspx
More information:
Overview of Performance Monitoring
http://technet.microsoft.com/en-us/library/cc958257.aspx
PerfGuide: Analyzing Poor Disk Response Times
http://social.technet.microsoft.com/wiki/contents/articles/1516.perfguide-analyzing-poor-disk-response-times.aspx
Analyzing Storage Performance using the Windows Performance Analysis ToolKit (WPT)
http://blogs.technet.com/b/robertsmith/archive/2012/02/07/analyzing-storage-performance-using-the-windows-performance-toolkit.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Before I updated to ios5 there was a "number" on the task bar next to bookmarks showing all the windows I like to keep open. Now I can't find the setting to go back to that feature. Help!! I just want to be able to click on the number to get to my windows

Before I updated to ios5 there was a number lit up on the task bar (next to bookmarks) which were all the windows I like to keep open. Now, after updating I can't find that feature in settings. I don't like all the different tabs along the top. Can anyone help me please?? I just want to click on the number and have all of my open windows there!

I don't think that is an option. iOS 5 new features is tabbed browsing, it replaced the old window interface.

How do you shut off the apps that are running? Before the update you hit the button twice then it would showing all the apps and u can then shut them off.

How do you shut off the apps? Before update I just hit the side button twice then it would show all the apps. Then I would shut them off.

http://manuals.info.apple.com/en_US/ipad_user_guide.pdf
View running apps.
Double-click the Home button to reveal the multitasking display. Swipe left
or right to see more. To switch to another app, tap it.
Quit an app.
If an app isn’t working properly, you can force it to quit. Drag the app up from the
multitasking display. Then try opening the app again

Report : How to show all the reports in Content Management

Hi,
Can anyone tell me how I can show the "Resource Locks" Report in Portal.
I can see 4 reports through Content Management -> Reports i.e. Approval Maintenance, Link Consistency, Resource Statistics, Time-based publishing.
If I want to add more reports over here than "How I can achieve it".
Also I have seen the settings System Administration -> System Configuration -> KM -> CM -> Repository Managers -> Reporting Repository
But here I find no combo box for Active Reports, so from where I can activate the reports and show them in Content Management -> Reports
Please help me.
Regards
Deep

Deep,
Are you talkign about the report which give you details of which Portal Objects are currently locked?
If yes, then you can go to System Adminitrator > Monitoring > Object Locking
Hope this helps,
*Points will be appreciated.

My Tool Bar keeps changing, one minute I'll have features and not the next. URLs don't show in the Address Bar -- all of this started after the last up-date

Since the most recent up-date of Firefox I've had buttons on the tool bar vanish and then return when I change web sites, etc. Too, the address bar does not show URLs a lot of time, especially after a search and I click to the link. I have to look under page properties to find the web address in order to link to pages later or even book mark them.
Please email me @ [email protected]

I noticed ''similar behavior'' on what I had thought to be modified pop-up windows. But I accidentally created a new window (tab tearing) and the new window did not have menu bar or tabs bar, but if I selected that window then it showed all toolbars and the original window the reduced set and can keep switching between the two to keep reversing which is which. Needless to say I can't duplicate it again. The location showed "Go to web" instead of the location on the new window, reload did not fix that, but creating a new tab did fix that upon return to the tab.

Firefox 17.0 and 18.0 version not showing all the data, while 19.0 version showing all the data. Why?

Am developing a website. after completion of preparing it, some textfield alignments are not in a proper order and some buttons are missing. What is the solutions for this??

Could you post a link to a publicly accessible page that doesn't require authentication (log in) to access?
Note that on Linux the width of text fields is determined by the size and font-size that is specified.
A good place to ask advice about web development is at the MozillaZine "Web Development/Standards Evangelism" forum.
*http://forums.mozillazine.org/viewforum.php?f=25
The helpers at that forum are more knowledgeable about web development issues.<br>
You need to register at the MozillaZine forum site in order to post at that forum.

Web part created on a subsite for a sharepoint list in another site using sharepoint designer, to show only the subsite's reports. Connection dropping off and showing all the reports

I crated web parts in the sub-sites (we have about 10 subsites) using sharepoint designer from a main list in another site. Then used web part to show only the ubsite's reports - using connection to the main list. Problem is, the connection
is dropping off and showing all the reports on the main list that are confidential. this has happened 3 time lately. Could someone explain why it happens some times? I had to fix it by adding the web part again and connecting it
Thanks, Subathy.

Hi George,
If you want to use a top level site "department" list column in all sub-sites, you can go to top level site and create a
lookup type "Site column" to look up the value from the department list, then all sub-sites can use this lookup type site column created in top level site.
Thanks
Daniel Yang
TechNet Community Support

Is there a report showing all the DDL objects for one APP?

Hi,
Is there a report showing all the DDL objects for one APP?
I need to move an app to my workspace. The workspace I need to move it from has approx 20 applications in it, thus all the tables, procedures, etc are too many.
What way is the easiest?
I've looked at exporting the DDL and the app. and look to see what the app needs. But it has many pages.
Thank you, BillC

Hello Bill,
You might find the report in the following location to be helpful:
Home>Application Builder>Application XXX>Application Reports>Shared Components>Application Database Object Dependencies
Regards,
Arie.

A report that shows all the elements with their setting

Hi
Is there a way to write a report in discoverer which will show all the elements set up in Oracle with there settings e.g. are they taxable or niable etc.
Alternatively is there a standard report in HRMS which would give the same results.
Thanks in advance

Not really as such. Taxable and Niable elements feed to the appropriate taxable or niable balances therefore, you will need to run a report against what elements are fed into these balances. I doubt that there will be anything as standard in teh pre shipped EUL's that will enable you to do this, however, for simple one of why don't you just call up teh balances in teh application and see what elemenst feed into them.
Cheers
Scott

How to show all the rows of a report in one page

My report has 30 rows, by default it just show 15 rows. I want to show all the rows just in one page, without cliking link or arrow to see the left.
In the Layout and Pagination:
Report Template: template: 15. Standard Report (PPR)
Pagination Scheme: Row Ranges X to Y (no pagination)
Display Position: Bottom - Right
Number of Rows: 1000
Number of Rows (item) 1000
Maximum Row Count: 1000
How to fix it?
Thanks.
Jen

Ok, I think I got it. I needed to blank out Number of Rows(item), Maximum row count and only populate Number of Rows. I was sure I did that before and it didnt work.
Do you think that the Sessions in Apex can cause unexpected results? I have found that when I make changes I have to log all the way out of Apex, close my browser and reopen everything to ensure that my change took. Does anyone else have this issue? I can move this into a different thread if need be.
Thx!

Summary report to show all the software components and version installed

We are using 64bit Windows 2003 and Hyperion Planning and Essbase in 2 separate servers. I am not sure whether Windows can have a summary report to show all the software components and version installed and show it is 32bit or 64bit version installed?
Thanks!

Refer steps here to delete SC file.:
http://support.apple.com/kb/TS2363
Then proceed to repair your QuickTime. START / CONTROL PANEL / ADD n REMOVE PROGRAMS / highlight QUICKTIME and click CHANGE then REPAIR.

How to show all the rows in a report

I have a report, and i want to show all the rows in a page, how to do it. Currently, i just show part of rows.
Thanks,
Jen

Jen,
I'm guessing you are using Application Express,...
Go to the region where the report is located, go to report attributes. In the "Layout and Pagination" section there is a setting called "Number of Rows". Change the setting, and that's it.

The database migration report don't show all the erros at creation time

Similar Messages

Maybe you are looking for