The DataSource 0CRM_LEAD_H does not exist in version A

Hi,
I am not getting any records on to BW side by any of the load(full,init/delta)
When checked RSA3 in source system(CRM) there are 5 records.
When checked RSA3 in source system(BW) it gives an error.
error:
DataSource 0CRM_LEAD_H is not defined in the source system
in (BW)Tcode RSA2 - for the DS 0CRM_LEAD_H
DataSource 0CRM_LEAD_H does not exist in version A
I checked RSA5 in crm and the DS is activated once again
Please suggest

No Nilesh,
Basis did some work around and was able to remote logon from SM59. But still the problem exist.
Now while installing business content I am getting an error (Logical system)
Error: Rule (target: 0GN_PAR_LSY, group: 01 Standard Group): Syntax error in routine
GN_PAR_LSY is an infoobject for Logical system.
Stuck up over here

Similar Messages

DataSource 80SD_O03 does not exist in source system of version A

Hi,
While Activating the Standard DSOs i'm getting this "DataSource 80SD_O03 does not exist in source system of version A".
Regards,
Devi.

Hi,
Hope you followed the same in R/3
Datasource: Rsa5->RSA6
BI Side:
Rsa1->BI Content->Select Datasource->Installation->Replicating/Activating the DS
And same procedure for Infoprovider too.
Please analyze closely about the procedure, some where you are missing something.
Regards,
Suman

DataSource 2LIS_11_VAHDR does not exist in source system ECDCLNT100 of vers

Hi iam working on BI 7 and ECC 6 system. When i try to install the transfer rules for 2 lis_11_vahdr in BI7 business content, it gave a message that "<b>DataSource 2LIS_11_VAHDR does not exist in source system ECDCLNT100 of version A".</b> i have done an enhancement for this.I activated them from rsa5, activated both in LBWE as well as activated thier structures too after enhancing. I replicated and did all possible steps still iam unable to find.
Can anybody help me who has faced similar issue.
Regards,
Neil

Hi Niel,
Could you chek the RFC Connection of particular client.
Thanks,
Ram

JDODataStoreException: The instance null does not exist in the data store

I'm unable to figure out how this exception occurs.
I have a class IDCounter which has a number of fields such as
'm_Name' (String)
'm_AccountName' (String)
'm_UserName' (String)
'm_Description' (String)
'm_CreationDate' (Date)
'm_LastModifiedDate' (Date)
'm_DeletedDate' (Date)
'm_Count' (long)
The filter I'm using is "m_AccountName == \"test\" && m_UserName
==\"test\" && m_DeletedDate == null"
The generated SQL statement is "SELECT t0.M_IDX, t0.JDOCLASSX,
t0.JDOLOCKX, t0.M_ACCOUNTNAMEX, t0.M_CREATIONDATEX, t0.M_DELETEDDATEX,
t0.M_DESCRIPTIONX, t0.M_LASTMODIFIEDDATEX, t0.M_NAMEX, t0.M_USERNAMEX,
t0.M_COUNTX FROM ABSTRACTENTITYX t0 WHERE ((t0.M_DELETEDDATEX IS NULL) AND
t0.JDOCLASSX = 'com.ewarna.pdm.entities.IDCounter')"
Exception Trace:
javax.jdo.JDODataStoreException: The instance null does not exist in the
data store.
     at
com.solarmetric.kodo.impl.jdbc.runtime.LazyResultList.instantiateRow(LazyResultList.java:165)
     at
com.solarmetric.kodo.impl.jdbc.runtime.LazyResultList.get(LazyResultList.java:96)
     at java.util.AbstractList$Itr.next(AbstractList.java:416)
     at
com.solarmetric.kodo.runtime.ResultListIterator.next(ResultListIterator.java:49)
     at
com.solarmetric.kodo.impl.jdbc.runtime.ResultListFactory.createResultList(ResultListFactory.java:85)
     at
com.solarmetric.kodo.impl.jdbc.runtime.JDBCStoreManager.executeQuery(JDBCStoreManager.java:646)
     at
com.solarmetric.kodo.impl.jdbc.runtime.JDBCQuery.executeQuery(JDBCQuery.java:150)
     at com.solarmetric.kodo.query.QueryImpl.executeWithMap(QueryImpl.java:580)
     at com.solarmetric.kodo.query.QueryImpl.execute(QueryImpl.java:428)
     at
com.solarmetric.kodo.query.QueryImpl$SynchronizedQuery.execute(QueryImpl.java:1331)
     at
com.ewarna.pdm.sessions.persistence.BasicQuery.getByAdvancedFormula(BasicQuery.java:78)
     at
com.ewarna.pdm.sessions.persistence.BasicQuery.getByFormula(BasicQuery.java:119)
     at
com.ewarna.pdm.sessions.persistence.BasicQuery.getByFormula(BasicQuery.java:95)
     at
com.ewarna.pdm.sessions.persistence.BasicQuery.getAll(BasicQuery.java:131)
     at
com.ewarna.pdm.sessions.persistence.GenericEntityManager$7.execute(GenericEntityManager.java:305)
     at
com.ewarna.pdm.sessions.persistence.GenericEntityManager.execute(GenericEntityManager.java:251)
     ... 18 more

Youcan no longer display a workbook. You receive an error message when opening: <Internal error>: 1201 document storage
Cause and prerequisites
In very rare cases, when you store a workbook, you might not be able to open it again.
Solution
Function module BDS_PHIOS_GET_RIGHT has to be changed so that the last available version of the Workbooks can be displayed.

The kind infoobject does not exist in the CMS

hi, all of a sudden, when i import a new biar file to the server, i got the below error message:
the kind infoobject does not exist in the CMS
the server worked fine before. and then i imported the biar to another server, it works fine, and seems not the biar problem.
then i found some error explanation
Cause
The InfoObject type does not exist in the CMS
Action
Ensure that the InfoObject type is propertly installed.
and
Cause
An InfoObject type is missing.
Action
Ensure that the XSD for this type of InfoObject is installed.
I want to know how to reinstall the infoObject type.
or any other idear on this.
thanks all.
Ada

WHat's the exact version of the source and the target BO system?
Regards,
Sratos

Error MSB4057: The target "PlatformPrepareForBuild" does not exist in the project._

Hi to all,
I tried to compile my .sln with VS2010 but I had this error.
error MSB4057: The target "PlatformPrepareForBuild" does not exist in the project.
It occurs only compiling with win32 configuration but not with x64 one.
Ideas?
Thank you in advanced

In which version of Visual Studio did you create this solution? And What type of the project in this solution? And could you please post the proj file here?
If this solution is created in VS2012 or VS2013, please make sure the original solution is not corrupt, it can be opened and built successfully in the corresponding Visual Studio. For probable compatibility issues, you could check the documents here:
Visual Studio 2012 Compatibility
Visual Studio 2013 Compatibility
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

The requested column does not exist in this table

Hi All,
I am getting the following error:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 59014] The requested column does not exist in this table. (HY000)
SQL Issued: SELECT "Customers - Dim".CITY FROM MVDEMO ORDER BY 1
When I tried viewing data online I am able to view the data in the physical Layer. Also I tried connecting thru ODBC Client and issued the same SQL (above) and it returns the data.
I am using Oralce BIEE 10.1.3.2.1 version.
Please let me know if any faced this kinda issue and how to resolve this.
Thank you.

Check your column mapping in the BMM layer in your Customers - Dim logical table. Does the CITY column point to a physical table column?

The name 'InitializeControl' does not exist in the current context

Hi ,
i try to run my visual web part in vs2012,without adding any code to template i deploy web part into sharepoint2013.
but i got below error
The name 'InitializeControl' does not exist in the current context.how can i solve this error
Thanks,
Madhu.

Here's my ASCX file that breaks the code generation:
<%@ Assembly Name="$SharePoint.Project.AssemblyFullName$" %>
<%@ Assembly Name="Microsoft.Web.CommandUI, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>
<%@ Register Tagprefix="SharePoint" Namespace="Microsoft.SharePoint.WebControls" Assembly="Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>
<%@ Register Tagprefix="Utilities" Namespace="Microsoft.SharePoint.Utilities" Assembly="Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>
<%@ Register Tagprefix="asp" Namespace="System.Web.UI" Assembly="System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" %>
<%@ Import Namespace="Microsoft.SharePoint" %>
<%@ Register Tagprefix="WebPartPages" Namespace="Microsoft.SharePoint.WebPartPages" Assembly="Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>
<%@ Control Language="C#" AutoEventWireup="true" CodeBehind="VisualWebPart1.ascx.cs" Inherits="Ensol.ViewAttachmentsWP2.VisualWebPart1.VisualWebPart1" %>
<asp:UpdatePanel ID="UpdatePanel1" runat="server">
<ContentTemplate>
<asp:Repeater ID="Repeater1" runat="server">
<HeaderTemplate>
<table>
</HeaderTemplate>
<ItemTemplate>
<tr>
<td><a href="<%# Eval("FileUrl") %>"><%# Eval("FileName") %></a></td>
<td><asp:LinkButton ID="LinkButton1" runat="server" CommandArgument="<%# Eval("FileName") %>" OnClick="LinkButton1_Click">Delete</asp:LinkButton></td>
</tr>
</ItemTemplate>
<FooterTemplate>
</table>
</FooterTemplate>
</asp:Repeater>
</ContentTemplate>
</asp:UpdatePanel>
No matter what I've tried to do with my webpart, the VS still generates an ASCX.G.CS file with no content at all. What I'm doing wrong?

The work book does not exist in the document store

Hi Forum,
Has anyone come accross this error "The work book does not exist in the document store" I just changed the description of my Work book in Development and saved. Now it wont open. The error message is "The work book does not exist in the document store". I already have this work book in Q. So I cannot create another one with a different tech. name. Someone please help

Youcan no longer display a workbook. You receive an error message when opening: <Internal error>: 1201 document storage
Cause and prerequisites
In very rare cases, when you store a workbook, you might not be able to open it again.
Solution
Function module BDS_PHIOS_GET_RIGHT has to be changed so that the last available version of the Workbooks can be displayed.

The name "Pi" does not exist in the namespace "clr-namespace:PressureVessels".

Pi is the name of a class.
I made some major modification to the program in VS 2013, then after transferring the program to another PC with VS 2012 running, I am getting many errors that says:
The name "ClassName" does not exist in the namespace "clr-namespace:PressureVessels".

Cleaning removes all the stuff out your bin.
If all this stuff is in the one solution then that's equivalent to manually deleting it.
If your app is composed from separate dll then I maybe some versioning issue.
If not and you can't reproduce the issue on your dev machine...
Tricky.
You would have mentioned it if you were putting stuff in the GAC.
Could be a sln or csproj issue.
They occasionally corrupt.
What else.
How did you get your code onto the other pc?
Is it contained within one folder with no external references beyond .net framework ones?
If you did something a bit dodgy with your references a dll might be coming from somewhere which is on your pc and not on this other one.
The only other advice I can think of is to step away for a bit and do something else.
It's all too easy to get into a flat spin when something drastic happens and one has no idea wtf is going on.
I used to be a points hound.
But I'm alright nooooooooooooooooooooooooooooOOOOOWWWW !

Is there a capability to save/export the time capsule settings file when using the iphone/ipad airport utility. the "file" button does not exist on the latest airport utility app.

is there a capability to save/export the new airport 2TB time capsule settings file when using the iphone/ipad airport utility. set-up wasn't a problem but the "file" button does not exist on the latest airport utility app v6.3 to save the configuration file.

the "file" button does not exist on the latest airport utility app v6.3 to save the configuration file.
Sounds like you are a bit confused with version numbers.
Latest AirPort Utility version for the iPhone / iPad is 1.3.3. There is no option or capability to export/import settings on the iOS version(s) of AirPort Utility.....although you could take a series of screen shots and save them for future reference.
AirPort Utility 6.3.x is found on a Mac.....not on iPhone / iPad. Export and Import options are found under the File menu in 6.3.x.

Error :-The requested resource does not exist while opening the adobe form

hello Experts,
We are in Portal implementation face with ECC6 EHP4 and Portal EHP1
We have developed adobe form using HCM forms and processes and done the required configuration in SPRO
When we are trying to open the form from ESS we are getting below error
404 not found
The requested resource does not exist.
Please look into this issue and let us know any thing we are missing
Sincerely
Paresh

is ADS working correctly?
1. Use transaction SA38 to execute the program FP_TEST_00.
       Detailed information about this test program and about how you
       should then proceed is given in the Adobe Document Services
       Configuration Guide in the Help Portal under:
       http://help.sap.com/saphelp_nw2004s/helpdata/en/37/504b8cbc2848a4
       94facfdc09a359b1/frameset.htm -> Adobe Document Services
       Configuration Guide -> Configuring the Web Service -> Securing
       Access to the Web Service ->Configuration Check -> Configuration
       Check for PDF-Based Forms in ABAP
       - If the FP_TEST_00 form is displayed in the print preview, the
          ADS configuration is correct.
          -> If you use scenarios with an interactive PDF, proceed with
          point 5. Otherwise, proceed with the test under point 6.
       - If the system displays an error message instead of a form, the
          configuration of ADS is incorrect.
          -> Carry out the additional tests from point 2 onwards.
2. Use transaction SA38 to execute the program FP_PDF_TEST_00.
    This enables you to check the RFC connection to ADS (see the
    reference to the documentation given above).
       - If the system displays the version number of ADS, the
          configuration of the RFC connection is correct.
read the note 944221
Please paste the whole error? Is any dump in ST22

The Specified Directory Does not Exist

Hi expert
could you help me with my problem , this word " The Specified Directory Does Not Exist" its some stupid question , isn't it ?
this is my sitiuation :
1. BPC version is SAP BPC 5.0.512
2. we are using MS Excel 2003
our user do some modification from BPC WEB (the BPC open excel file with many macro and add-in etc ... ), then user save using Save Dynamic Template sub menu from eTools menu , and raise message "The Specified Directory Does not Exist < directory path>/eEXCEL. "
the questions Are .
1. Could anyone explain why BPC try to save in Client Local Direcory not is BPC Server
2. Could anyone help me how to resolve the problem ?
(i am appolagize with my bad english )
thanks.

HI nvsleman ,
I had the same problem and I manually copied the eExcel folder (on my local harddrive) from a working application to the application in question.
Hope this helps
Sabine

The requested query does not exist on the current server

Hy, i created an workbook an QAs with a query that i have trasported from DEV.
The query exist on QAs system but when open the workbook i receive this error message:<i>'The requested query does not exist on the current server'</i>.
When i select ok, the workbokk is opened correctly because the query exist in system QAs.
How can i remove the initial error message .
Thank's
Andrea
System: BI 7.0
tool BEx version 7.0

Hi
When you create a workbook in DEV, you will be assigning a query for that workbook
When you transport workbook from DEV to QA,the assigned workbook comes along with it
When you transport only query from DEV to QA, there are certain technical elements called query elements which may not have transported properly
To avoid this inconsistency between DEV and QA,it is advisable you transport the workbook again....Create new workbook in DEV, assign a query, transport the workbook to QA
Regards
N Ganesh

Azure Rest API PUT Block Blob Returns "The specified resource does not exist" CORS

I am trying to upload a file to Azure Blob storage. For some reason when I try to put a new block blob on in the storage it tells me the resource does not exist. I am sure it is something silly I am missing.
According to the documentation:
The Put Blob operation creates a new block blob or page blob, or updates the content of an existing block blob. Updating an existing block blob overwrites any existing metadata on the blob. Partial updates are not supported with Put Blob; the content of the
existing blob is overwritten with the content of the new blob. To perform a partial update of the content of a block blob, use the Put Block List (REST API) operation.
CORS is setup and that seems okay.
When I do a preflight and get this:
Request URL:https://<account>.blob.core.windows.net/test/image.png
Request Method:OPTIONS
Status Code:200 OK
Request Headers
OPTIONS /test/image.png HTTP/1.1
Host: <account>.blob.core.windows.net
Connection: keep-alive
Cache-Control: no-cache
Pragma: no-cache
Access-Control-Request-Method: PUT
Origin: http://www.<site>.com
User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/33.0.1750.117 Safari/537.36
Access-Control-Request-Headers: accept, content-type
Accept: */*
Referer: http://www.<site>.com/azure/
Accept-Encoding: gzip,deflate,sdch
Accept-Language: en-US,en;q=0.8
Response Headers
HTTP/1.1 200 OK
Transfer-Encoding: chunked
Server: Blob Service Version 1.0 Microsoft-HTTPAPI/2.0
x-ms-request-id: 0d372e95-1524-460a-ab9c-7973d42a7070
Access-Control-Allow-Origin: http://www.<site>.com
Access-Control-Allow-Methods: PUT
Access-Control-Allow-Headers: accept, content-type
Access-Control-Max-Age: 36000
Access-Control-Allow-Credentials: true
Date: Thu, 27 Feb 2014 22:43:52 GMT
But when I make the PUT request these are the results.
Request URL:https://<account>.blob.core.windows.net/test/image.png
Request Method:PUT
Status Code:404 The specified resource does not exist.
Request Headers
PUT /test/image.png HTTP/1.1
Host: <account>.blob.core.windows.net
Connection: keep-alive
Content-Length: 22787
Cache-Control: no-cache
Pragma: no-cache
x-ms-blob-content-dis; filename = "image.png"
User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/33.0.1750.117 Safari/537.36
Content-Type: image/png
x-ms-blob-type: BlockBlob
Accept: application/json, text/plain, */*
x-ms-version: 2013-08-15
Origin: http://www.<site>.com
x-ms-date: Thu, 27 Feb 2014 23:19:19 GMT
Referer: http://www.<site>.com/azure/
Accept-Encoding: gzip,deflate,sdch
Accept-Language: en-US,en;q=0.8
Response Headers
HTTP/1.1 404 The specified resource does not exist.
Content-Length: 223
Content-Type: application/xml
Server: Blob Service Version 1.0 Microsoft-HTTPAPI/2.0
x-ms-request-id: d5a60c8b-356a-44ff-93af-0ea720b5591f
x-ms-version: 2013-08-15
Access-Control-Expose-Headers: x-ms-request-id,Server
Access-Control-Allow-Origin: http://www.<site>.com
Access-Control-Allow-Credentials: true
Date: Thu, 27 Feb 2014 23:22:42 GMT

Your request must be authenticated to be able to upload a blob. Please see our
Windows Azure Storage: Introducing CORS blog post for more information on using Shared Access Signatures with CORS.

The DataSource 0CRM_LEAD_H does not exist in version A

Similar Messages

Maybe you are looking for