The debugger was unable to redefine the recompiled classes
Hi,
I'm using the Jdeveloper11.1.2 and I'm getting the below error while rebuilding the java file in debug mode after updating my java file.
The debugger was unable to redefine the recompiled classes.
Unsupported operation: schema change.
I tried the Following Way to remove this issue:
1: stop the server
2: close the appliication and remove the classes files and data files from the application.
3: start the weblogic server and stop the running application.
4: clear the drs and temp file and change the directory.
5: restart the system and once again clean the temp files.
6: rebuild all the files and make the jar file but at runtime in debug mode when I rebuild the file once again I'm getting the above error.
please help me out how I can solve this problem.
thanks in advance.
Regards
Sanjeev
When you run the UI in the browser does the change in the Java class show up / work fine ? Then you need not worry about the message technically ;)
Ideally when you see such an option you have probably modified a method signature or added a new method.So you just need to run your UI again from Jdev.
Also check if this helps -
http://rimmidis.blogspot.in/2010/03/hot-deployment-after-compiling-in-your.html
Similar Messages
-
I just got a new computer. Windows 7. Toshiba. Intel 13-3110M Processor. 6GB DDR3 Memory. 1TB 5400rpm Hard Drive. Intel HD Graphics 4000. 2.40 GHz. 64-bit operating system.
I installed CS5 Creative Suite on it (which worked perfectly fine on my two previous computers--Windows 7 and Windows 8). Since then Photoshop and Illustrator have been giving me the same error message. "The application was unable to start correctly (0xc0150002). Click OK to close the application." The programs still open and remain open after pressing okay, but the message comes back every minute or so.
Then, with InDesign, the program won't open at all. It gives me the error message of "Cannot load the PDF.RPLN plug-in. It is dependent on the EPS PAGE ITEM.RPLN plug-in, which failed to load. Please check documentation for the EPS PAGE ITEM.RPLN plug-in." Then InDesign stops responding and closes itself.
I have to live with this computer for two more weeks (and then I go home and can use my old one again/return this current laptop), and I have schoolwork that counts on me being able to use these programs. If anybody could help me, I would be super grateful!
Oh, and I've already tried installing and uninstalling it.Without system information nobody can say anything. also check the logs in the Event Viewer.
Mylenium -
I'm doing a project for my Professional Writing course and I
have to use RoboHelp to create an online help document. The
professor provided templates for us to use but when I go to open
the project file I get the following error: "open project was
cancelled or the application was unable to load database
for....(then the directory)"
I know the project file isn't corrupted because the members
of my class are using the same one without issue. I tried
re-downloading the file, I also re-installed the program itself,
still with no luck. I'm using a Trial Version of RoboHelp 6.0 .
The only other suggestions I have seen are that I don't have
edit perms for the system, but it's my personal laptop and I have
full admin privs. I thought at first that the folder was read-only,
but when I opened it up all it displays is the little green box in
the checkbox (which doesn't mean the folder is read-only, it's just
some stupid windows default, it's only read-only if the box is
actually checked). I tried making the entire directory read-only
and then turn it off but still get the same error.
Any suggestions?There's a topic on my site about Opening Projects that
includes the method of deleting the CPD and XPJ files but I didn't
cover that as the project is good for everyone else. Anything is
worth a try at the moment though.
Another thing to try is to rename the course folder, then
create a new folder with the same name plus all sub folders. Then
move the files across. That will ensure the folder properties are
good and not read only. Yes I know what you said but again anything
is worth a try.
Also, in the last post you are saying the directory is not
read-only. I assume the files are all good?
Ref my previous post, is it the case that now you are getting
an error before the original error would have popped up? -
Hi, my laptop just crashed and I was unable to retrieve all the pictures saved in it. However, I have a backup on my iPod touch. Is it possible to sync pictures from my iPod to my laptop? Thanks.
Sync with "new" computer
https://discussions.apple.com/docs/DOC-3141 -
We developed a SSIS Package to pull the data From Oracle source to Sql Server 2012. Here we used ADO.Net source to pull the records from Source but getting the below error after pulling some 40K records.
[ADO NET Source [2]] Error: The ADO NET Source was unable to process the data. ORA-64203: Destination buffer too small to hold CLOB data after character set conversion.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED.
The PrimeOutput method on ADO NET Source returned error code 0xC02090F5.
The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component,
but the error is fatal and the pipeline stopped executing.
There may be error messages posted before this with more
information about the failure.
Anything that we can do to fix this?Hi,
Tried both....
* Having schema type as Nvarchar(max). - Getting the same error.
* Instead of ADO.Net Source used OLEDB Source with driver as " Oracle Provide for OLE DB" Getting error as below.
[OLE DB Source [478]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on OLE DB Source returned error code 0xC0202009. The component returned a failure
code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the
failure.
Additional Info:
* Here the Source task is getting failed not the conversion or destination task.
Thanks,
Loganathan A. -
Hi,
After running the prerequisiteinstaller.exe of SharePoint 2013 I am getting the below error in the logs
The tool was unable to install Application Server Role, Web Server (IIS) Role.
Web server role,application server role is already there in the server.
Ran the necessary power shell commands but still not able to proceed with this error.
Please share your inputs to cross over this issue.
Regards,
Sudheer
Thanks & Regards, SudheerHI Sudheer,Please check the link below that explains the solution for the same issues.
http://expertsharepoint.blogspot.de/2014/01/the-tool-was-unable-to-install.html
Anil Avula[Partner,MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/ -
I have been banging my head over and over searching for the fix and nothing has worked. Google used to be my friend. I am having doubts.
Windows 2012 Server with IIS installed during the server creation using VMware Vshpere. Here is the log from the SP prep tool.
2014-06-23 10:13:12 - Processor architecture is (9)
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - Common Startup
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
2014-06-23 10:13:12 - Trying to remove the startup task if there is any.
2014-06-23 10:13:12 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\SharePointServerPreparationToolStartup_0FF1CE14-0000-0000-0000-000000000000.cmd
2014-06-23 10:13:12 - Error: Startup task doesn't exist. This is not a continuation after a restart.
2014-06-23 10:13:12 - Locating the following command line arguments file:
2014-06-23 10:13:12 - C:\sp2013\PrerequisiteInstaller.Arguments.txt
2014-06-23 10:13:12 - Error: This file does not exist
2014-06-23 10:13:12 - Details of the current operating system:
2014-06-23 10:13:12 - Major version number of the operating system: (6)
2014-06-23 10:13:12 - Minor version number of the operating system: (2)
2014-06-23 10:13:12 - Build number of the operating system: (0X23F0=9200)
2014-06-23 10:13:12 - Major version number of the latest Service Pack: (0)
2014-06-23 10:13:12 - Minor version number of the latest Service Pack: (0)
2014-06-23 10:13:12 - Platform ID of the operating system: (2)
2014-06-23 10:13:12 - Product suites available on the operating system: (0X110=272)
2014-06-23 10:13:12 - Product type of the operating system: VER_NT_SERVER
2014-06-23 10:13:12 - Product type: (7)
2014-06-23 10:13:12 - OS type: (0)
2014-06-23 10:13:12 - Configuring the application's property sheet...
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Windows Management Framework 3.0
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - PowerShellVersion
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 4.0
2014-06-23 10:13:12 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Microsoft .NET Framework 4.5
2014-06-23 10:13:12 - Reading the following DWORD value/name...
2014-06-23 10:13:12 - Install
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-06-23 10:13:12 - The value is (1)
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - Version
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 4.5.51641
2014-06-23 10:13:12 - A post release .NET 4.5 is installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Windows Identity Foundation (KB974405)
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 -
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 6.1.7600.0
2014-06-23 10:13:12 - The prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
2014-06-23 10:13:12 - Reading version of the following file...
2014-06-23 10:13:12 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2014-06-23 10:13:12 - The version is...
2014-06-23 10:13:12 - 1.0.3010.0
2014-06-23 10:13:12 - The prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Microsoft SQL Server 2008 R2 SP1 Native Client
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - Version
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 10.51.2500.0
2014-06-23 10:13:12 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Windows Server AppFabric
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - ProductVersion
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 1.1.2106.32
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - ProductVersion
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 1.1.2106.32
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - ProductVersion
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 1.1.2106.32
2014-06-23 10:13:12 - Reading the following DWORD value/name...
2014-06-23 10:13:12 - DCC
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-06-23 10:13:12 - The value is (1)
2014-06-23 10:13:12 - CacheClient is Installed.
2014-06-23 10:13:12 - Reading the following DWORD value/name...
2014-06-23 10:13:12 - DCS
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-06-23 10:13:12 - The value is (1)
2014-06-23 10:13:12 - CacheService is Installed.
2014-06-23 10:13:12 - Reading the following DWORD value/name...
2014-06-23 10:13:12 - DCA
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-06-23 10:13:12 - The value is (1)
2014-06-23 10:13:12 - CacheAdmin is Installed.
2014-06-23 10:13:12 - The prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Windows Identity Foundation (KB974405)
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 -
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 2.0.1230.0
2014-06-23 10:13:12 - The prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Microsoft Information Protection and Control Client
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 -
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 1.0.959.0
2014-06-23 10:13:12 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Microsoft WCF Data Services 5.0
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - Version
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 5.0.51212.0
2014-06-23 10:13:12 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2014-06-23 10:13:12 - Reading the following DWORD value/name...
2014-06-23 10:13:12 - IsInstalled
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2014-06-23 10:13:12 - The value is (1)
2014-06-23 10:13:12 - The prerequisite above is already installed
2014-06-23 10:13:19 - Beginning download/installation
2014-06-23 10:13:19 - Created thread for installer
2014-06-23 10:13:20 - "C:\Windows\system32\ServerManagerCmd.exe" -inputpath "C:\Users\ADMINI~1\AppData\Local\Temp\2\PreA98B.tmp.XML"
2014-06-23 10:13:20 - Error: Unable to install (2)
2014-06-23 10:13:20 - Error: [In HRESULT format] (-2147024894)
2014-06-23 10:13:20 - Last return code (2)
2014-06-23 10:13:20 - Reading the following DWORD value/name...
2014-06-23 10:13:20 - Flags
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Updates\UpdateExeVolatile
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - PendingFileRenameOperations
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SYSTEM\CurrentControlSet\Control\Session Manager
2014-06-23 10:13:20 - Reading the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update\RebootRequired
2014-06-23 10:13:20 - Error: The tool was unable to install Application Server Role, Web Server (IIS) Role.
2014-06-23 10:13:20 - Last return code (2)
2014-06-23 10:13:20 - Options for further diagnostics: 1. Look up the return code value 2. Download the prerequisite manually and verify size downloaded by the prerequisite installer. 3. Install the prerequisite manually from the given location without any
command line options.
2014-06-23 10:13:20 - Cannot retry
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Windows Management Framework 3.0
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - PowerShellVersion
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 4.0
2014-06-23 10:13:20 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Microsoft .NET Framework 4.5
2014-06-23 10:13:20 - Reading the following DWORD value/name...
2014-06-23 10:13:20 - Install
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-06-23 10:13:20 - The value is (1)
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - Version
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 4.5.51641
2014-06-23 10:13:20 - A post release .NET 4.5 is installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Windows Identity Foundation (KB974405)
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 -
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 6.1.7600.0
2014-06-23 10:13:20 - The prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
2014-06-23 10:13:20 - Reading version of the following file...
2014-06-23 10:13:20 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2014-06-23 10:13:20 - The version is...
2014-06-23 10:13:20 - 1.0.3010.0
2014-06-23 10:13:20 - The prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Microsoft SQL Server 2008 R2 SP1 Native Client
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - Version
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 10.51.2500.0
2014-06-23 10:13:20 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Windows Server AppFabric
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - ProductVersion
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 1.1.2106.32
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - ProductVersion
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 1.1.2106.32
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - ProductVersion
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 1.1.2106.32
2014-06-23 10:13:20 - Reading the following DWORD value/name...
2014-06-23 10:13:20 - DCC
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-06-23 10:13:20 - The value is (1)
2014-06-23 10:13:20 - CacheClient is Installed.
2014-06-23 10:13:20 - Reading the following DWORD value/name...
2014-06-23 10:13:20 - DCS
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-06-23 10:13:20 - The value is (1)
2014-06-23 10:13:20 - CacheService is Installed.
2014-06-23 10:13:20 - Reading the following DWORD value/name...
2014-06-23 10:13:20 - DCA
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-06-23 10:13:20 - The value is (1)
2014-06-23 10:13:20 - CacheAdmin is Installed.
2014-06-23 10:13:20 - The prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Windows Identity Foundation (KB974405)
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 -
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 2.0.1230.0
2014-06-23 10:13:20 - The prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Microsoft Information Protection and Control Client
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 -
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 1.0.959.0
2014-06-23 10:13:20 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Microsoft WCF Data Services 5.0
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - Version
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 5.0.51212.0
2014-06-23 10:13:20 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2014-06-23 10:13:20 - Reading the following DWORD value/name...
2014-06-23 10:13:20 - IsInstalled
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2014-06-23 10:13:20 - The value is (1)
2014-06-23 10:13:20 - The prerequisite above is already installed
2014-06-23 10:16:23 - Opening log file
2014-06-23 10:16:23 - Opened action for user
2014-06-23 10:16:23 - C:\Users\ADMINI~1\AppData\Local\Temp\2\prerequisiteinstaller.2014.06.23-10.13.12.logIt looks like you may have extracted the files to C:\sp2013. Can you try installing from a mounted ISO instead? Can you also validate that this is Server 2012 and not 2012 R2?
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Hello,
I have installed the app-v 5 client on a 2012 rd server. After publishing the application I’m getting the error “The
application was unable to start correctly (0xc0000142). Click OK to close the application.”
The registry value
NtfsDisable8dot3NameCreation is already set on 2.
The error in the eventlog is
“could not be started because the App-V Subsystem 'Virtual Filesystem' could not be initialized. {error: 0x6740090A-0x20003}”
Thanks in advance
ReneSee this blog post: http://blogs.technet.com/b/gladiatormsft/archive/2013/06/11/app-v-5-0-on-these-0xc0000142-errors-and-where-they-are-coming-from.aspx
Please remember to click "Mark as Answer" or "Vote as Helpful" on the post that answers your question (or click "Unmark as Answer" if a marked post does not actually
answer your question). This can be beneficial to other community members reading the thread.
This forum post is my own opinion and does not necessarily reflect the opinion or view of my employer, Microsoft, its employees, or other MVPs.
Twitter:
@stealthpuppy | Blog:
stealthpuppy.com |
The Definitive Guide to Delivering Microsoft Office with App-V -
Trying to move Acrobat 7.0 Standard (Version 7.0.9) to a new computer. found the website to download a new copy of the application. Downloaded and installed. When trying to start the application an error message immediately pops up - "The application was unable to start correctly (0xc00000fd). Click OK to close the application."
How can this be resolved?Hi mpatterson54,
Could you please tell me what OS version are you using on your new computer?
Regards,
Anubha -
Another username, password later, ..., control handed over to Creative Cloud, install Audition.... then
"The application was unable to start correctly (0xc000007b)" in Audition CC. So re-installed. I on't want to spend hours trying to get Adobe software to run. This was my trial application download to see how it worked. ANd it didn't. And there are heaps of posts with complicated advice... ending with - go get a chat support person. And they are not available. aaaaggggghhhhh
I am now worried that installing any other app from CCloud may cause problems on my PC with other Adobe SW.
What is the latest (and hopefully simple) way of getting this program to run?
I don't have ilivid,
I do have: CS5, Win 7 Prof, installed via some Adobe CCloud app that I was told to install and use to manage your CC account,
Grateful for anyone who can wave the magic wand.Above linked gave this soln:
1. please try to download a dll file from https://drive.google.com/file/d/0B4eWI-NGpmnuTUxPQVIxYThSNlE/edit?usp=sharing
2. The package contains the files msvcr100.dll and msvcr80.dll. Extract the package contents to the following location:
I copied the 2 DLL files to the C:\program files\Adobe\audition cc 2014 folder and it worked. SIMPLE !!!!!! YEH.
Thanks -
The application was unable to start correctly (0x000007b)
cannot open my download of Lightroom 4.4. getting activation message "The application was unable to start correctly (0x000007b). Click OK to close the application.
Message title was edited by: Brett Nhttp://forums.adobe.com/search.jspa?resultTypes=&dateRange=all&peopleEnabled=true&q=0xc000 007b&containerType=14&container=3316&containerName=Photoshop+Lightroom&username=&rankBy=da te&numResults=15
-
The application was unable to start correctly (0x00007b) adobe
HI All,
Are you able to help?! I have just downloaded a trial version of Adobe Lightrooms from the Cloud and get the following error message 'the application was unable to start correctly (0x00007b)' Does anyone have a fix? @...07b Problems http://forums.adobe.com/thread/1355374?tstart=0
-
The Application was unable to start correctly (0xc0000005)
Dear Support,
This is to inform you that we are using Windows Server 2008 R2 Enterprises Edition (x64) & suddently it is showing the message "The Application was unable to start correctly (0xc0000005. Click OK to close the
application."
I have already checked all the technical steps as per Microsoft solutions like-
these are the steps that I have been done.
1. I have checked regedit Hkey_Classes_Root>exefile>shell>open>(default) as "%1" %*
2. Uninstalled dotnet frameware & re-installed correctly.
2. Microsoft C++ 2005,2008 redistributable re-installed.
3. The Windows has been updated.
4. check by "Microsoft Fix-it" & executed, the report is clean.
5. The Anti Virus is disabled (Quick Heal).
6. & all the junk files are cleaned as well (like- %temp%).
But its still showing the error while we are trying to open a application (most of the *.exe), [Application name.exe has stopped working>The Application was unable to start correctly (0xc0000005. Click OK to close the application.
Kindly do the needful solutions urgently.
Regards,
Akib Ahmed
Mob- +91 8584047126
Email: [email protected]
Chandrani Enterprises Pvt. Ltd. | Asansol
Nh-2, Bogra Chatti, Asansol, Burdwan - 713332 (W.B.), India.Hi,
First please test if it is caused by third party application. A Clean Boot could help disable all third party applications.
http://support.microsoft.com/kb/331796/en-us
Meanwhile is there any change made before the issue occurs, such as Windows Update, installed any program etc? If there is a restore point before the issue occurs, it may be a quicker solution for this issue.
If you have any feedback on our support, please send to [email protected] -
Hi,
I just installed Visual Studio and when I launch it, the following error pops up: "The Application was unable to start correctly (0xc000007b). Click OK to close the application". I tried searching online but no usable results. Please help!
jdHi,
There is not enough information about the problem. For troubleshooting, I recommend you can use Process Monitor to detect whether there's any process failed.
You can download Process Monitor and see how to use it for troubleshooting in below links:
http://support.microsoft.com/kb/939896
http://blogs.technet.com/b/askperf/archive/2007/06/01/troubleshooting-with-process-monitor.aspx
There are a lot of log entries in Process Monitor, you may filter Visual Studio process only(proces = devenv.exe). And you can upload the logs to OneDrive so that we can investigate them.
Also, you can refer to Gfazil's post in
https://social.msdn.microsoft.com/Forums/vstudio/en-US/96035692-9a50-40d4-a7d3-48bda87d11ec/the-application-was-unable-to-start-correctly-0xc000007b-click-ok-to-close-the-application-when?forum=vssetup
Please try the method he mentioned to see whether the problem can occur:
" Replacing the dlls mentioned below from a machine that is working solves the problem:
c:\Windows\SysWOW64\msvcp100.dll
c:\Windows\SysWOW64\msvcp100d.dll
c:\Windows\SysWOW64\msvcr100.dll
c:\Windows\SysWOW64\msvcr100_clr0400.dll
c:\Windows\SysWOW64\msvcr100d.dll "
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey. -
My computer is returning a "The application was unable to start correctly (0xc000007b) Click Ok to close the application" message, every time I try to start After Effects or SpeedGrade
Oops sorry.
OS - windows 7 premium.
CPU - i7-2600 @3.4GHz
Graphics - Asus HD7750 (running dual display)
SpeedGrade, Dreamweaver and 3DS max all give the same problem
Any help?
Maybe you are looking for
-
EP6 sp12 Performance Issue, Need help to improve performance
We have a Portal development environment with EP6.0 sp12. What we are experiencing is performance issue, It's not extremely slow, but slow compared to normal ( compared to our prod box). For example, after putting the username and password and clicki
-
How do i get adobe to install - i have a new computer?
I have a new computer and it tells me i have to install Flash Player. How do i do that?
-
Can anybody tell me what is wrong with this code. The following error message is shown at the compile time. local variable l is accessed from within inner class; needs to be declared final How can I fix it. import javax.swing.*; import java.awt.event
-
Hello to everyone, does anybody know why it is necessary to fill up the material group field at item level when you create a purchase requisition for services with item category "D". Because when you create a purchase requisition for services, you in
-
Anyone ever has there camera just stop working in mid use? Can't get it going again any ideas?