The Default Gateway Is Not Available / Problem

Hello, I recently purchased this HP Pavileon laptop, and I've been encountering this problem very often (every 2-10 minutes). This problem is getting extremely frustrating as absolutely nobody has been able to provide a fix for this issue.
When the laptop is on battery mode (this does not happen when plugged in); I commonly get disconnected from my wi-fi connection and to fix it, I must run the troubleshooter. This temporarily fixes the issue by resetting the wi-fi adapter.
What I have tried and has not worked:
* Turn off to save power option in the driver settings (in Device Manager) untickets
* Updated drivers
* New power plan
* Tried different drivers
* Complete system restore
The wireless adapter is Realtek RTL 8188EE. Upon running the troubleshooter, this is all the information from the detailed information section:
Windows Network Diagnostics
Publisher details
Issues foundThe default gateway is not available
The default gateway is not availableThe default gateway is a device that connects a local network or computer to the Internet. A broadband modem or router is usually the default gateway.
Fixed
Reset the "WiFi" adapter
Completed
Investigate router or broadband modem issues
Not run
Issues found
Detection details
6The default gateway is not availableFixed
The default gateway is a device that connects a local network or computer to the Internet. A broadband modem or router is usually the default gateway.
Reset the "WiFi" adapterCompleted
This can sometimes resolve an intermittent problem.
Network Diagnostics LogFile Name: 2D0FE1F0-C2C2-43B5-A857-2D2B3C4B8A51.Repair.1.etl Investigate router or broadband modem issuesNot run
If you're connected to a hotspot or domain network, contact the network administrator. Otherwise: 1. Unplug or turn off the device. 2. Once all the lights on the device are off, wait at least 10 seconds. 3. Turn the device on or plug it back in to the power outlet. To restart a router or modem that has a built-in battery, press and quickly release the Reset button.
Detection details
Diagnostics Information (Network Adapter)
Details about network adapter diagnosis:
Network adapter WiFi driver information:
Description . . . . . . . . . . : Realtek RTL8188EE 802.11b/g/n Wi-Fi Adapter
Manufacturer . . . . . . . . . : Realtek Semiconductor Corp.
Provider . . . . . . . . . . . : Realtek Semiconductor Corp.
Version . . . . . . . . . . . : 2012.2.827.2013
Inf File Name . . . . . . . . . : C:\WINDOWS\INF\oem8.inf
Inf File Date . . . . . . . . . : 12 September 2013 10:17:00
Section Name . . . . . . . . . : HP8188ee.ndi
Hardware ID . . . . . . . . . . : pci\ven_10ec&dev_8179&subsys_197d103c
Instance Status Flags . . . . . : 0x180200a
Device Manager Status Code . . : 0
IfType . . . . . . . . . . . . : 71
Physical Media Type . . . . . . : 9
Diagnostics Information (Wireless Connectivity)
Details about wireless connectivity diagnosis:
Information for connection being diagnosed
Interface GUID: 7c04789b-0b43-472c-abd6-a84cb31e9053
Interface name: Realtek RTL8188EE 802.11b/g/n Wi-Fi Adapter
Interface type: Native WiFi
Connection incident diagnosed
Auto Configuration ID: 1
Connection ID: 1
Connection status summary
Connection started at: 2014-07-24 04:19:49-759
Profile match: Success
Pre-Association: Success
Association: Success
Security and Authentication: Success
List of visible access point(s): 0 item(s) total, 0 item(s) displayed
Connection History
Information for Auto Configuration ID 1
List of visible networks: 1 item(s) total, 1 item(s) displayed
BSS Type PHY Security Signal(RSSI) Compatible SSID
Infra <unknown> Yes 100 Yes Matt
List of preferred networks: 1 item(s)
Profile: Matt
SSID: Matt
SSID length: 4
Connection mode: Infra
Security: Yes
Set by group policy: No
Connect even if network is not broadcasting: No
Connectable: Yes
Information for Connection ID 1
Connection started at: 2014-07-24 04:19:49-759
Auto Configuration ID: 1
Profile: Matt
SSID: Matt
SSID length: 4
Connection mode: Infra
Security: Yes
Pre-Association and Association
Connectivity settings provided by hardware manufacturer (IHV): No
Security settings provided by hardware manufacturer (IHV): No
Profile matches network requirements: Success
Pre-association status: Success
Association status: Success
Last AP: 98-fc-11-88-61-b8
Security and Authentication
Configured security type: WPA2-PSK
Configured encryption type: CCMP(AES)
802.1X protocol: No
Key exchange initiated: Yes
Unicast key received: Yes
Multicast key received: Yes
Number of security packets received: 0
Number of security packets sent: 0
Security attempt status: Success
Connectivity
Packet statistics
Ndis Rx: 34302
Ndis Tx: 32619
Unicast decrypt success: 0
Multicast decrypt success: 0
Unicast decrypt failure: 0
Multicast decrypt failure: 0
Rx success: 0
Rx failure: 0
Tx success: 0
Tx failure: 0
Tx retry: 0
Tx multiple retry: 0
Tx max lifetime exceeded: 0
Tx ACK failure: 0
Roaming history: 0 item(s)
Diagnostics Information (Wireless Connectivity)
Details about wireless connectivity diagnosis:
For complete information about this session see the wireless connectivity information event.
Helper Class: Auto Configuration
Initialise status: Success
Information for connection being diagnosed
Interface GUID: 7c04789b-0b43-472c-abd6-a84cb31e9053
Interface name: Realtek RTL8188EE 802.11b/g/n Wi-Fi Adapter
Interface type: Native WiFi
Result of diagnosis: There may be problem
Diagnostics Information (Wireless Network Adapter)
Details about wireless network adapter diagnosis:
For complete information about this session see the wireless connectivity information event.
Helper Class: Native WiFi MSM
Initialise status: Success
Information for connection being diagnosed
Interface GUID: 7c04789b-0b43-472c-abd6-a84cb31e9053
Interface name: Realtek RTL8188EE 802.11b/g/n Wi-Fi Adapter
Interface type: Native WiFi
Profile: Matt
SSID: Matt
SSID length: 4
Connection mode: Infra
Security: Yes
Connect even if network is not broadcasting: No
Result of diagnosis: There may be problem
Network Diagnostics LogFile Name: 2D0FE1F0-C2C2-43B5-A857-2D2B3C4B8A51.Diagnose.0.etl
Other Networking Configuration and LogsFile Name: NetworkConfiguration.cab Collection information Computer Name: LAPTOP Windows Version:6.3Architecture:x64Time:24 July 2014 04:34:47
Windows Network Diagnostics Detects problems with network connectivity. Package Version:1.0Publisher:Microsoft Windows

Run the HP Support Asssitant's Tune up application. There should be a new BIOS available. sp66866
Have you installed the latest Windows 8.1 updates?
Do not install optional video graphics updates.
I was runnning into a similar problem with my HP product loan Envy Spectre 13 TouchSmart Ultrabook until I did the updates. I had upgraded my wireless router to a model with 802.11AC specification.
Invoke the Device Manager and ensure that the box next to Allow this computer to turn off this device to save power is unchecked.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

I am having problems with my new ipad that i got for Christmas today, i don't get free wi-fi at my home and it said if the wi-fi is not available, connect to itunes. i have done that and it didnt help me. mind helping me out?

i am having problems with my new ipad that i got for Christmas today, i don't get free wi-fi at my home and it said if the wi-fi is not available, connect to itunes. i have done that and it didnt help me. mind helping me out?

Further info - I changed my security settings to allow apps from anywhere, and again tried to install. I again got an error message
that the update failed to install, and to contact Customer Support.

WRT350N : how to specify the default gateway?

Hello,
I would like to use my wrt350n as a dhcp server, but want to specify another router as the default gateway.
I have my wrt350n (192.168.1.254) and another modem/router (192.168.1.1). When a client connects to the wrt350n, it automatically receives as default gateway the adress of the wrt350 (192.3168.1.1). I would like to change that to reference the other adress 192.168.1.1.
Thanks for your comments
Raph
Solved!
Go to Solution.

Hello,
Thanks for your answer.
I try to give you more information.
The modem router (bbox2 : 192.168.1.1) is connected to an ethernet port on the WRT350 (192.168.1.254). I would like to desactivate the DHCP server on the bbox2 (because limited to 802.11g), and activate it on the wrt350, to have a wireless network in 802.11n. The problem when I do that, is at the dhcp server, the default gateway returns is always the ip adress of the wrt350 (so no internet access). Nevertheless, I have to specify the ip of the bbox (192.168.1.1) for the internet traffic. I don't find a way to change the value of the default gateway returns by the wrt350. I can set different values for DNS, but not for the gateway.
Actually, I turn on the dhcp server on the bbox and turnoff it on the wrt350, but my wireless spped is limited to 54Mbits (802.11g), and this not annoying for surfing purpose, but annoying when streaming video from my san connected to the wrt350n.
I don't know if it's clear now?
Thanks for your feedback

HT5429 i m using iphone 4s . when i try to set direction that time i get one error like the map server is not available . will you help me ?

i m using iphone 4s . when i try to set direction that time i get one error like the map server is not available . will you help me ?
how to help this problem..?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Cannot Connect to Time Capsule: "the backup disk is not available"

I am having a problem that I can't diagnose with my 500 GB Time Capsule (my HD is 128GB). The firmware is current. I first did a search for 'the backup disk is not available' since that is the message displayed in the Time Machine window (with the red checkmark).The Time Machine widget says this:
Attempting to mount network destination using URL: afp://[email protected]/xxx%20xxx's%20Time%20Capsu
NetAuthConnectToServerSync failed with error: 89 for url: afp://[email protected]/xxx%20xxx's%20Time%20Capsu
I installed the widget after I went to the Time Machine - Troubleshooting user tip, here: http://discussions.apple.com/thread.jspa?threadID=2057525. Also went to Using TIME MACHINE with a TIME CAPSULE, here: http://discussions.apple.com/thread.jspa?threadID=2296894
I also renewed the DHCP lease, tried to do 'connect as' from the Sidebar window, also via go-> connect to server ("there was an error connecting to the server Timecapsule; Check the server name or IP address & try again"), go to Time Machine under System Preferences, select "None" for hard drive, turned off Time Machine, then turned it back on and reselect Time Capsule as the hard drive to backup (timed out), tried re-setting up the Time Capsule both automatic & manual (times out when reading TC configuration)., and finally, writing this post.
I am connected to the internet with the Time Capsule, and I am concerned about making too many changes, because I don't want to risk losing my internet connection, since that seems to be working fine. I was able to make regular backups until yesterday. Tracing my steps from when it used to work to when it 'broke':
1)I attempted (unsuccessfully) to mount the Time Capsule so that I could do a search on it. (I didn't realize at the time that I couldn't mount a wireless device.)
2)The only other thing I did was drag some music folders that I wanted backed up next to my sparsebundle backup (which I can no longer see, because the Time Capsule is no longer accessible via the finder) only to get the spinning ball with the copying window, which I couldn't force quit unless I quit the Finder. So, I force quit, rebooted, and repaired the disk/permissions with disk utility.
Did I do something wrong by dragging & dropping my files over trying to use it as a backup AND a an external HD? Or trying to mount the drive? Or maybe since adding several gigs of music, I took up too much space & now don't have room for a backup? (In which case, I need to access the drive & erase the music, and start over: if only I could SEE it I could do that.)
I am still doing searches trying to see what I need to do; I haven't yet re-set it, due to my concern about my internet connection, which could potentially prevent me from getting any information to fix it. At this time, I am not sure if this is a Time Capsule, Time Machine, or Airport issue. During the time that I have been writing this, the red check changed to 'connecting' but then the 'delayed - Time Machine is not available' message came back up
TIA

Reboot the network in correct order.. modem.. router/TC.. clients.. 2min gap.
This is just standard windows.. woops, Mac OS networking now.

Time Machine says "The Backup Disk is Not Available"

Line 0: I have a 400 GB external Western Digital drive that I leave plugged into an Airport Extreme. Previously, this worked mostly without a problem. It took some massaging to get it to work at first (I had to create the backup with the drive directly connected to the computer, and then I moved the drive over to the Airport Extreme and it was fine after that), but after that, it worked forever. This was in the previous version of the OS that I was running (snow leopard?). I very recently upgraded to Lion and it seemed to be OK, but then suddenly it gave me an error that said it had not been able to do a backup for 10 days. I thought "wow, that means it hasn't backed up since I upgraded to Lion."
So I told it to do a backup right away. It failed with the error "The backup disk is not available."
I unplugged the drive and plugged it back in. No go.
I tried to reselect the drive from within Time Machine preferences. It would not appear and in fact it kept forcing me to go to the Airport Extreme software. I did this and there was no obvious way to set anything up from within that software. I left everything as it was ("Enable file sharing" checked, "Secure shared disks" was at "with device password," and it was remembering the password in my keychain).
Go back to Time Machine preferences and the disk still doesn't show up. Force a reboot on the router, it still doesn't show up.
I brought the drive over to the computer and plugged it in directly, and everything was fine. It did a backup on the spot, it read the backup that was there, the drive showed up, etc. I formatted it just for the heck of it and started over completely and it was happy. I did a disk check and everything was fine. After leaving it on all night to complete a new backup, I unmounted the disk, brought it over to the Airport Extreme, plugged it back in, and now we go back to line 0 and rinse repeat.
Can someone please tell me how to get my drive to start working with Time Machine again?

It should not have worked in the first place.. when you moved it from the PC to the airport extreme.. that is not correct.. I don't know how SL managed to work around it.. but Lion obviously cannot.
You will need to start all over again..
Also note.. the flakey nature of this setup.. according to well respected people here AEBS with USB drive does not give reliable TM backups.. I would pay close attention to what they are saying. Time Capsule is more than a AEBS with a hard drive inside.. although exactly the difference I don't know.
But you can expect the current setup to not work, because it never should have.

Error on extend an internal table, but the required space was not available

Hi All,
I am trying to retrieve cost data from COVP tables, as well as the quantity, cost centre, and price unit fields from MSEG / BSEG tables. Thing is, if the AWTYP value in COVP table = 'MKPF', i have to get the data from MSEG, otherwise, I need to get it from BSEG table.
I kept getting this error message:
<i>You attempted to extend an internal table, but the required space was not available.</i>
Anyone have any idea how to make my codes more efficient?
Please help. Thanks!
Regards,
Cecilia
REPORT ZMISCY004.
TABLES : COVP, BSIS, BSEG, MSEG, MAKT, CSKU.
PARAMETERS :
P_FILE(300) DEFAULT '\sapdcdatasaprptoh.txt' LOWER CASE.
DATA MSG_TEXT(50).
DATA :
XKOKRS LIKE COVP-KOKRS,
XBELNR LIKE COVP-BELNR,
XBUZEI LIKE COVP-BUZEI,
XGJAHR LIKE COVP-GJAHR,
XPERIO LIKE COVP-PERIO,
XWKGBTR LIKE COVP-WKGBTR,
XWTGBTR LIKE COVP-WTGBTR,
XREFBN LIKE COVP-REFBN,
XREFBZ LIKE COVP-REFBZ,
XKSTAR LIKE COVP-KSTAR,
XBEKNZ LIKE COVP-BEKNZ,
XMATNR LIKE COVP-MATNR,
XBUKRS LIKE COVP-BUKRS,
XREFGJ LIKE COVP-REFGJ,
XREFBK LIKE COVP-REFBK,
XLTEXT LIKE CSKU-LTEXT,
XMAKTX LIKE MAKT-MAKTX,
XAWTYP LIKE COVP-AWTYP,
XTWAER LIKE COVP-TWAER,
XSGTXT LIKE COVP-SGTXT,
BSEG_KOSTL LIKE BSEG-KOSTL,
BSEG_MEINS LIKE BSEG-MEINS,
BSEG_MENGE LIKE BSEG-MENGE,
MSEG_KOSTL LIKE MSEG-KOSTL,
MSEG_MENGE LIKE MSEG-MENGE,
MSEG_MEINS LIKE MSEG-MEINS.
DATA : BEGIN OF ITAB_COVP OCCURS 10,
KOKRS LIKE COVP-KOKRS,
BELNR LIKE COVP-BELNR,
BUZEI LIKE COVP-BUZEI,
GJAHR LIKE COVP-GJAHR,
PERIO LIKE COVP-PERIO,
WKGBTR(15) TYPE C,
WTGBTR(15) TYPE C,
REFBN LIKE COVP-REFBN,
REFBZ(3) TYPE C,
KSTAR LIKE COVP-KSTAR,
BEKNZ LIKE COVP-BEKNZ,
MATNR LIKE COVP-MATNR,
BUKRS LIKE COVP-BUKRS,
REFGJ LIKE COVP-REFGJ,
REFBK LIKE COVP-REFBK,
LTEXT LIKE CSKU-LTEXT,
MAKTX LIKE MAKT-MAKTX,
AWTYP LIKE COVP-AWTYP,
TWAER LIKE COVP-TWAER,
SGTXT LIKE COVP-SGTXT,
BSIS_WRBTR(13) TYPE C,
BSEG_KOSTL LIKE BSEG-KOSTL,
BSEG_MEINS LIKE BSEG-MEINS,
BSEG_MENGE LIKE BSEG-MENGE,
MSEG_KOSTL LIKE MSEG-KOSTL,
MSEG_MENGE LIKE MSEG-MENGE,
MSEG_MEINS LIKE MSEG-MEINS.
DATA : END OF ITAB_COVP.
SELECT M1~KOKRS
       M1~BELNR
       M1~BUZEI
       M1~GJAHR
       M1~PERIO
       M1~WKGBTR
       M1~WTGBTR
       M1~REFBN
       M1~REFBZ
       M1~KSTAR
       M1~BEKNZ
       M1~MATNR
       M1~BUKRS
       M1~REFGJ
       M1~REFBK
       M1~AWTYP
       M1~TWAER
       M1~SGTXT
       M4~KOSTL
       M4~MENGE
       M4~MEINS
INTO (XKOKRS,
      XBELNR,
      XBUZEI,
      XGJAHR,
      XPERIO,
      XWKGBTR,
      XWTGBTR,
      XREFBN,
      XREFBZ,
      XKSTAR,
      XBEKNZ,
      XMATNR,
      XBUKRS,
      XREFGJ,
      XREFBK,
      XAWTYP,
      XTWAER,
      XSGTXT,
      MSEG_KOSTL,
      MSEG_MENGE,
      MSEG_MEINS
FROM COVP AS M1
LEFT OUTER JOIN MSEG AS M4
ON M1~REFBN = M4~MBLNR AND M1~REFBZ = M4~ZEILE AND M1~REFGJ = M4~MJAHR
WHERE M1~SCOPE = 'OCOST' AND M1~AWTYP = 'BKPF'
OR M1~SCOPE = 'OCOST' AND M1~AWTYP = 'MKPF'
OR M1~KSTAR = '972022'.
IF XAWTYP = 'BKPF'.
SELECT KOSTL MENGE MEINS INTO (BSEG_KOSTL, BSEG_MENGE, BSEG_MEINS) FROM
BSEG WHERE BELNR = XREFBN AND BUZEI = XREFBZ AND GJAHR = XREFGJ AND
BUKRS = XREFBK.
ENDSELECT.
MOVE BSEG-KOSTL TO BSEG_KOSTL.
MOVE BSEG-MEINS TO BSEG_MEINS.
MOVE BSEG-MENGE TO BSEG_MENGE.
ELSE.
MOVE ' ' TO BSEG_KOSTL.
MOVE ' ' TO BSEG_MEINS.
MOVE ' ' TO BSEG_MENGE.
ENDIF.
*GET LTEST
SELECT LTEXT INTO XLTEXT
FROM CSKU
WHERE KTOPL = 'COAA' AND SPRAS = 'EN'.
*GET MAKTX
IF XMATNR <> ' '.
SELECT SINGLE * FROM MAKT WHERE MATNR = XMATNR.
MOVE MAKT-MAKTX TO XMAKTX.
ELSE.
MOVE ' ' TO XMAKTX.
ENDIF.
MOVE : XKOKRS TO ITAB_COVP-KOKRS,
       XBELNR TO ITAB_COVP-BELNR,
       XBUZEI TO ITAB_COVP-BUZEI,
       XGJAHR TO ITAB_COVP-GJAHR,
       XPERIO TO ITAB_COVP-PERIO,
       XWKGBTR TO ITAB_COVP-WKGBTR,
       XWTGBTR TO ITAB_COVP-WTGBTR,
       XREFBN TO ITAB_COVP-REFBN,
       XREFBZ TO ITAB_COVP-REFBZ,
       XKSTAR TO ITAB_COVP-KSTAR,
       XBEKNZ TO ITAB_COVP-BEKNZ,
       XMATNR TO ITAB_COVP-MATNR,
       XBUKRS TO ITAB_COVP-BUKRS,
       XREFGJ TO ITAB_COVP-REFGJ,
       XREFBK TO ITAB_COVP-REFBK,
       XLTEXT TO ITAB_COVP-LTEXT,
       XMAKTX TO ITAB_COVP-MAKTX,
       XAWTYP TO ITAB_COVP-AWTYP,
       XTWAER TO ITAB_COVP-TWAER,
       XSGTXT TO ITAB_COVP-SGTXT,
       BSEG_KOSTL TO ITAB_COVP-BSEG_KOSTL,
       BSEG_MEINS TO ITAB_COVP-BSEG_MEINS,
       BSEG_MENGE TO ITAB_COVP-BSEG_MENGE,
       MSEG_KOSTL TO ITAB_COVP-MSEG_KOSTL,
       MSEG_MENGE TO ITAB_COVP-MSEG_MENGE,
       MSEG_MEINS TO ITAB_COVP-MSEG_MEINS.
APPEND ITAB_COVP.
CLEAR ITAB_COVP.
ENDSELECT.
ENDSELECT.
OPEN DATASET P_FILE FOR OUTPUT IN TEXT MODE.
IF SY-SUBRC NE 0.
   WRITE: 'File cannot be opened. Reason:', MSG_TEXT.
   EXIT.
ENDIF.
LOOP AT ITAB_COVP.
TRANSFER ITAB_COVP TO P_FILE.
ENDLOOP.
CLOSE DATASET P_FILE.

Cecilia - I think your problemn is a nested select:
*GET LTEST
SELECT ltext INTO xltext
FROM csku
WHERE ktopl = 'COAA' AND spras = 'EN'.
*GET MAKTX
    IF xmatnr <> ' '.
      SELECT SINGLE * FROM makt WHERE matnr = xmatnr.
      MOVE makt-maktx TO xmaktx.
    ELSE.
      MOVE ' ' TO xmaktx.
    ENDIF.
    MOVE : xkokrs TO itab_covp-kokrs,
                 etc.
          mseg_meins TO itab_covp-mseg_meins.
    APPEND itab_covp.
    CLEAR itab_covp.
ENDSELECT.
Do you need to do the inner select for every cost element text?
Rob

The default wallpapers are not showing up. All I see is a black screen. How do I get back default wallpapers?

Hello,
I have a problem with my iPhone. The default wallpapers are not showing up. All I see is a black screen. Can someone tell me what has to be done?

Go to the Home screen with one press of the home button. Then double press the Home button. When the Dock raises, tap and hold one of the app icons untill they all start jiggling and a red X appears. Tap the red X on the video app to quit the app.

Http Status 404, The Requested resource is not available

Dear Friends,
I am getting error with my tomcat that " The Requested resource is not available"
Kindly help me , What is the wrong with my code.
I am using Eclipse 6.0.1, Tomcat 5.5.20, jdk 1.5.0, j2sdk 1.4.0
My application is just to print user datas and my files are
*1. login.jsp*
<html>
<head>
<title>login Page </title>
</head>
<body>
<form action="login" method="post">
<table>
     <tr>
     <td>UserName</td><td><input type="text" name="username"/></td>
     </tr><tr>
     <td>Password</td><td><input type="password" name="password"/></td>
     </tr>
     <tr><td><input type="submit" value="login"/>
     </tr>
</table>
</form>
</body>
</html>
*2.web.xml*
<web-app>
<servlet>
     <servlet-name>login</servlet-name>
     <servlet-class>login</servlet-class>
</servlet>
<servlet-mapping>
     <servlet-name>login</servlet-name>
     <url-pattern>/login</url-pattern>
</servlet-mapping>
</web-app>
*3. login.java*
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
public class login extends HttpServlet
     public void doPost(HttpServletRequest req, HttpServletResponse res)
          try
          PrintWriter out = res.getWriter();
          String name = req.getParameter("username");
          String password = req.getParameter("password");
          out.println(name+" servlet page");
          }catch(Exception e)
          e.printStackTrace();
File Directory:
Myapp
! !-->src
! ! !--> login.java
! !-->WebRoot
! !--> META-INF
! !--> WEB-INF
! !--> Classes
! !--> login.class
! !--> lib
! !--> web.xml
-->login.jsp
CATALINA_HOME C:\Program Files\Apache Software Foundation\Tomcat 5.5
CLASSPATH C:\Program Files\Apache Software Foundation\Tomcat 5.5\common\lib\servlet-api.jar;C:\Program Files\Apache Software Foundation\Tomcat 5.5\common\lib\jsp-api.jar
path C:\Program Files\Java\jdk1.5.0_05\bin;C:\Program Files\Apache Software Foundation\Tomcat 5.5\bin;C:\j2sdk1.4.0\bin
Please anyone give me the solution to solve my problem.
Thank you

Try moving your class file to a package
<servlet-class>com.logon.login</servlet-class>
! !-->src
! ! !-->com
          ! !-->logon
                    ! !--> login.java

[TOMCAT] [SERVLET] : The requested resource () is not available.

Hi!! I'm looking for an answer to my problem, and I'm going to explain what I mean.
I've created a .jar named yuhuuTunnel.jar that has the following structure:
yuhuuTunnel.jar:
--> web (contains the servlets)
      --> *.class
      --> HelloWorldServlet.class
--> META-INF
      --> MANIFEST.MF
--> SimpleClient.classThe code of HelloWorldServlet.java is this:
    package web;
    import java.io.IOException;
    import java.io.PrintWriter;
    import javax.servlet.http.HttpServlet;
    import javax.servlet.http.HttpServletResponse;
    import javax.servlet.http.HttpServletRequest;
    import javax.servlet.ServletException;
    import javax.servlet.ServletConfig;
    public class HelloWorldServlet extends HttpServlet {
        public void init(ServletConfig config) throws ServletException {
            super.init(config);
        public void doGet( HttpServletRequest request, HttpServletResponse response )
                throws ServletException, IOException {
            doPost(request, response);
        public void doPost( HttpServletRequest request, HttpServletResponse response)
                throws ServletException, IOException {
            response.setContentType("text/html");
            PrintWriter out = response.getWriter();
            out.println("<html>");
            out.println("<body>");
            out.println("<body bgcolor=\"white\">");
            out.println("<h1>Yuhuu Servlet!</h1>");
            out.println("</body>");
            out.println("</html>");
    }then, using a .war file (created with ANT), I've created into /../tomcat/webapps/ a directory call yuhuuTunnel that has this structure:
    /webapps/
          --> yuhuuTunnel
                --> WEB-INF
                        --> web.xml
                        --> lib
                             --> yuhuuTunnel.jar
                --> META-INF
                        --> MANIFEST.MF
                             --> yuhuuTunnel.jar
                --> index.htmlThe content of web.xml is the following:
    <?xml version="1.0" encoding="ISO-8859-1"?>
    <!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.2//EN" "http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
    <web-app>
        
        <servlet>
             <servlet-name>HelloWorld</servlet-name>
             <servlet-class>web.HelloWorldServlet</servlet-class>
             <load-on-startup>0</load-on-startup>
        </servlet>
        <servlet-mapping>
             <servlet-name>HelloWorld</servlet-name>
             <url-pattern>HelloWorld</url-pattern>
        </servlet-mapping>
    </web-app>Tomcat works correctly ( http://localhost:8080 return me the page of tomcat ) but when I try to use the HelloWoldServlet typing http://localhost:8080/yuhuuTunnel/HelloWorld into a browser, this one returns me the HTTP Status 404 - The requested resource () is not available.
What is wrong? The address that I type into the browser or there's an error into web.xml?
Something interesting: If I type
http://localhost:8080/yuhuuTunnel/HelloWorld
the message given back is: "The requested resource () is not available."
but if I type
http://localhost:8080/HelloWorld the message is different:
"The requested resource (/HelloWorld) is not available."

<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.2//EN" "http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
<web-app>

<servlet>
         <servlet-name>HelloWorld</servlet-name>
         <servlet-class>web.HelloWorldServlet</servlet-class>
         <load-on-startup>0</load-on-startup>
</servlet>
<servlet-mapping>
         <servlet-name>HelloWorld</servlet-name>
         <url-pattern>HelloWorld</url-pattern>
</servlet-mapping>
</web-app>Please change the servlet url pattern from
<url-pattern>HelloWorld</url-pattern>to
<url-pattern>/HelloWorld</url-pattern>in servlet mappings
REGARDS,
RaHuL

404 'the requested resource is not available'

Hi All,
We created a KM iview and accessing Flash file. Some users are able to see the iview without error. Some users are getting 404 'the requested resource is not available' Error. They are not able to see the flash file in portal.
Can anyone advise me what the problem is and resolution steps for this?
Thanks,
Srinivasu.Y

Hi Srinivasu,
Well you already have lots of valid suggestions above but this problem might be causing for various reasons. As you have already checked the permissions for the set of the users having this problem, it might be worth checking if there are many nodes of the server instance and if any of these are not working properly. It can happen that when those set of users are trying to access the resource, the request is hitting specific server nodes which is unable to find the resource for some reasons. You can try asking the users to clear their browser cache and try again so that when the users try to access the same resource again it might go to different node this time.
But probably this is a temporary solution that might work as has worked in my case but there might be problem with some server nodes which is worth looking at.
Hope it helps.
Regards,
Gourav

Wifi not available problem in iphone 4s after 7.1.2 update.how can i fix it?

wifi not available problem in iphone 4s after 7.1.2 update.how can i fix it? please help me with this.

Hi harsh282828,
Welcome to the Apple Support Communities!
If you experiencing issues with Wi-Fi being grayed out or dim on your iPhone 4s I suggest the troubleshooting steps provided in the attached article.
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/TS1559
Have a great day,
Joe

ESS/MSS - Error " 404, The requested resource is not available."

Hi
I have deployed below archives in the EP 7.0 SP14 system. My back end system is ECC 6.0 with SP14.
1)BP ERP05 ESS 1.0 with sp14
2)BP ERP05 MSS 1.0 with sp14
3)SAP ESS 600 with sp14
4)SAP MSS 600 with sp14
5)SAP PCUI_GP 600 with sp14
We are getting " The requested resource is not available." error after clicking on
Working Time tab.
Can anyone suggest me whether i need to update any higher level patches from EP and ERP side ?
Or what could be the problem ?
Thanks in Advance,
Vinay

Hi Vinay
Check below steps one by one for your application.Whch is very helpful link.
http://help.sap.com/saphelp_erp2004/helpdata/en/38/e8584c2a664547b60442646bee23b6/frameset.htm
Regards
-SS

Portal Error 404 (The requested resource is not available)

Dear,
I have faced the below error in our Portal (6.0), I have created a new role that its linked normally with worksets, pages and i-view, all the way to custom SAP R/3 transactions, most of the users are able to see and execute these transactions, but one of them faced the below error, please advise? What it could be the problem?
404
The requested resource is not available.
stack trace
com.sapportals.wcm.protocol.webdav.server.WDServletException
at com.sapportals.wcm.protocol.webdav.server.WDObject.throwNotFoundIf(WDObject.java:54)
at com.sapportals.wcm.protocol.webdav.server.WDGetHandler.handle(WDGetHandler.java:110)
at com.sapportals.wcm.protocol.webdav.server.WDServlet.doGet(WDServlet.java:775)
at com.sapportals.wcm.protocol.webdav.server.WDServlet.service(WDServlet.java:462)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sapportals.wcm.portal.proxy.PCProxyServlet.service(PCProxyServlet.java:334)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sapportals.portal.prt.core.broker.ServletComponentItem$ServletWrapperComponent.doContent(ServletComponentItem.java:110)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:646)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:95)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:160)

check whether user has end user permissions or not

How get the RVS4000's DHCP server to assign another IP address other than its own as the default gateway to its DHCP clients?

Hi,
I have a RVS4000 router with DHCP enabled and in router mode.
The LAN is 192.168.2.x. The RVS4000 static IP address is 192.168.2.8
The router is not the RVS4000 and is at 192.168.2.1
The RVS4000 dhcp is assigning it's clients a default gateway of 192.168.2.8 instead of what I want 192.168.2.1.
How can I get the RVS4000's DHCP server to assign another IP address other than its own as the default gateway to its DHCP clients?
Thanks

Hi Gail, you cannot do this. The router, as the DHCP server will only assign a default gateway of what IP interface the DHCP server runs on. If you have the default IP, the gateway is 192.168.1.1. If you create a second vlan, by default it would be 192.168.2.1.
There are not configuration options for the built-in DHCP server. If you'd like to expand this functionality, you would need an external dhcp server.
-Tom
Please mark answered for helpful posts

The Default Gateway Is Not Available / Problem

Similar Messages

Maybe you are looking for