The delay of USRP Driver

I tested the delay of latest USRP Driver 1.2 (download from http://www.ni.com/download/ni-usrp-1.3/4711/en/ ) and found niUSRP Abort. vi has unaccept delay of 200 ms ... much larger than the same vi in the older USRP Driver 1.2, it is very unaccountable .
What is more , it seems the latest Driver 1.2 has many problems such as LV program crash and cannot be stopped. I hope these problems will be solved. Thanks a lot

I use the latest USRP Driver 1.2 with LV 2012

Similar Messages

Usrp driver 1.3 do not support for Labview 2013 64 bit ??

Hello, dear all
Is anyone install the latest USRP driver 1.3 for LV 2013 64 bit ? I found there is no version for 64 bit LV 2013.

Currently the 1.3 driver supports only LabVIEW 2013 32 bit (even on 64 bit computers.)
The LabVIEW 2014 version will support 64 bit and will be available to download very soon.
Please check here within the next week or so: http://search.ni.com/nisearch/app/main/p/bot/no/ap/tech/lang/en/pg/1/sn/ssnav:drv/q/usrp/

HT1284 Can I back up my Mac and my pc to the same external hard drive? If so, could you explain how? Thanks.

Can I back up my Mac and my pc to the same external hard drive? If so, could you explain how? Thanks. I am a new user with mountain lion.

You could partition the drive into 2 partitions. One formatted as HFS+ for Mac OS X back, and one formatted as NTFS for Windows backup.
You would have to move the drive from system to system to do your backups. If there are 2 systems, I would suggest just getting separate drives for each, unless they are both laptops, then you will be disconnecting the drives all the time anyway.
Unless Windows is running in a virtual machine on your Mac. Then a partitioned drive would be fine.

IPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds recorded. This happens randomly and often and sometimes has the delay but starts at zero. Solution Anyone?

After iOS 7 update, my iPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds that it shows has recorded. This happens randomly and often, sometimes it will have the 5+ second delay but starts recording at zero seconds. Besides the delay it has been working fine as far as saving and playback is concerned. I have plenty of storage on the phone itself and it NEVER had this problem before I updated to iOS 7. I've reset the phone a couple times by holding down the power and home buttons at the same time. The reason I have an issue with this is that I'm always recording song ideas, melodies, and scratch takes; what I'm saying is when I come up with an idea I need to be able to know that when I hit record it will start right then so I don't forget anything that has just popped in my mind.
Does anyone have a solution or suggestion?
Thanks

After iOS 7 update, my iPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds that it shows has recorded. This happens randomly and often, sometimes it will have the 5+ second delay but starts recording at zero seconds. Besides the delay it has been working fine as far as saving and playback is concerned. I have plenty of storage on the phone itself and it NEVER had this problem before I updated to iOS 7. I've reset the phone a couple times by holding down the power and home buttons at the same time. The reason I have an issue with this is that I'm always recording song ideas, melodies, and scratch takes; what I'm saying is when I come up with an idea I need to be able to know that when I hit record it will start right then so I don't forget anything that has just popped in my mind.
Does anyone have a solution or suggestion?
Thanks

Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verif

Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verifying and repairing it but had no luck. I also tried mounting and unmounting it but still no solution. Anyone to help please?

Looks bad. I would strongly advise backing up the stuff on the other two partitions as soon as possible in case the rest of the drive goes wrong.
Beyond that, Disk Utility has limited abilities to repair disks, DiskWarrior uses a different approach and might, emphasis might be more successful. It has certainly done the job for me in the past when Disk Utility could not.
See http://www.alsoft.com/diskwarrior/

In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?

In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?

Yes, junker thumb drives pour like rain in the market.
Which makes are working on your Air, and which arent?
Stick to Sandisk and a couple of other reliable mfg. of memory sticks

Crystal Reports XI String [255] limit with the File System Data driver...

I was trying to create a Crystal Reports XI report to return security permissions of files and folders. I have been able to successfully connect and return data using the File System Data driver as the Data Source; however the String limit on the ACL NT Security Field is 255 characters. The full string of data to be returned can be much longer than the 255 limit and I cannot find how to manipulate that parameter.
I am currently on Crystals XI and Crystal XI R2 and have applied the latest service packs but still see the issue. My Crystal Reports Database DLL for File System data ( crdb_FileSystem.dll ) is at Product Version 11.5.10.1263.
Is it possible to change string limits when using the File System Data driver as the Data Source? If so, how can that be accomplished. If not, is there another method to retrieve information with the Windows File System Data being the Data Source? Meaning, could I reach my end game objective of reporting on the Windows ACL's with Crystal through another method?

Hello,
This is a known issue. Early versions you could not create folder structures longer than 255 characters. With the updates to the various OS's this is now possible but CR did not allocate the same space required.
It's been tracked as an enhancement - ADAPT01174519 but set for a future release.
There are likely other ways of getting the info and then putting it into an Excel file format and using that as the data source.
I did a Google search and found this option: http://www.tomshardware.com/forum/16772-45-display-explorer-folders-tree-structure-export-excel
There are tools out there to do this kind of thing....
Thank you
Don
Note the reference to msls.exe appears to be a trojan: http://www.greatis.com/appdata/d/m/msls.exe.htm so don't install it.
Edited by: Don Williams on Mar 19, 2010 8:45 AM

I have a time machine backup file on a USB hard drive. I bought a time capsule / airport extreme, flat 3TB. I wish to transfer the backup file from the usb hard drive to the time capsule hard drive. 10.6.8

I have a time machine backup file on a USB hard drive. I bought a time capsule / airport extreme, flat 3TB. I wish to transfer the backup file from the usb hard drive to the time capsule hard drive. 10.6.8

Unfortunately, Time Machine backups that are stored on a drive that has been connected directly to a Mac are completely different than Time Machine backups that are stored on a Time Capsule.
Frankly, it is not worth the effort and trouble to try to transfer the old backups to the new Time Capsule.....my opinion....having done this in the past.
It is possible though, but I would not recommend it due to the complexity and downsides involved with this. To give you an idea of how to do this, check out this support article.
http://pondini.org/TM/18.html
Even if you transfer the "old" backups over to the Time Capsule successfully, Time Machine will not simply "add on" to the old backups.
Time Machine will make a new complete backup of your Mac and then add incremental backups from that point.
My advice.....start a new backup on the Time Capsule and move forward. Keep the USB hard drive around for a month, maybe 2 or 3 in case you need to go back to an old backup for some reason. At that time, you will not likely need the old backups at all since you will have a current 2-3 month history of new backups. At that point, you can erase the USB drive and use it for another purpose.

How many times should I run the APPLE TEST HARDRIVE/DRIVE on my macbook?

how many times should I run the APPLE TEST HARDRIVE/DRIVE on my macbook?

Do you mean your hardware tester or Disk Utility?
-Bmer
Mac Owners Support Group - Join us @ MacOSG.com
  Mac611 Mobile Mac Support - about.Mac611.com
   iTunes:MacOSG Podcast | YouTube.MacOSG.com
                   An Apple User Group 
Have an iPhone or iPod touch? Enter Mac611.com in Safari on it for 'mobile Mac support.'

HT4314 I have 4 iPads and one apple Id. Two the devices record clash of clans and dragonvale individually and the other two are tied to the other two. Drives my kids nuts. How do I fix this?

I have 4 iPads and one apple Id. Two the devices record clash of clans and dragonvale individually and the other two are tied to the other two. Drives my kids nuts. How do I fix this?

Also, I'd prefer to keep the same ID on both so I will keep access to my calendar/contacts/etc on both devices. Would I be able to share reminders and voice memos and the like as well? And how often would they update each other? If I edit a contact on the 5, and the 4 is in wifi, assuming they're both on my same ID, will the contact update on the 4?

I had a power mac g4 into which i put 3, 320 gb PATA hard drives in a raid slice config so that it worked as one drive needless to sat that i lost the g4 to a surge but the drives are good. now i have an imac, how can i recover the info off those drives

i had a power mac g4 into which i put 3, 320 gb PATA hard drives in a raid slice config so that it worked as one drive needless to sat that i lost the g4 to a surge but the drives are good. now i have an imac, how can i recover the info off those drives. can i put the drives in external cases and plug them all in, will the imac see them as a raid slice then help please

Before you have another accident:
Buy a UPS of good quality and sufficient to your needs.
I would have to assume that the drives were connected to a PCI PATA card, hopefully. Otherwise, well RAID and having drives on the same bus (master and slave).
And no backup, none at all...
Get your hands on a G4.
Data Rescue 3 from Prosoft maybe.
If they were SATA and running on PCI SATA controller, very popular and common really in G4s, more options would be open.

Can I use the same external hard drive for time machine and storing other files

I have a 640GB external hard drive that I have been using for over a year for time machine backups. My mac hard drive is now starting to fill up and I am looking to move audio, video and picture files to my external hard drive. How do I do this without messing up my time machine backups? Can I do both on the same external hard drive? Do I just make new folders on the external hard drive to move the files I want? Thanks for the help.

If you move the files you will need to get another disk to back the files up to. You don't want to have only one copy of certain files (personal, professional etc.).

I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?

I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?

iLife is preinstalled on all the Macs. If you purchased iLife in the App Store or your computer came without DVDs, open App Store > Purchases and download the applications. If your Mac came with discs, insert the Applications DVD and install iLife applications

I have one 120GB SSD and one 1TB SSHD, how do do I make one of them my boot drive and the other my data drive?

I'm currently upgrading my mid-2010 Macbook Pro 13", I've purchased some new RAM and also a 120GB SSD and a 1TB SSHD (Hybrid SSD and HD) with the intention of using an OWC data doubler to get rid of my dvd drive and place the SSD drive there instead. So after I've placed everything into the Mac, how do I make the SSD my boot drive with the OS on it and everything, and the SSHD where all my data (music, photos etc) are stored?

Youll need to CLONE your internal HD to your target (temporarily) external drive.
1. grab carbon copy cloner or (my fave) superDuper CLONE app.
2. attach target clone drive via USB in an enclosure or HD dock. Firstly format the target (external new) HD in disk utility in “Mac OS extended journaled”
3. clone internal HD to target HD (external) [takes about 40 mins depending on size]
4. Boot ONCE from external (go to sys. preference to boot from external) to TEST the new Clone
5. open bottom (see videos on ifixit or youtube on same) and remove old, install new.
http://www.ifixit.com/Guide/Replacing+MacBook+Pro+13-Inch+Unibody+Mid+2012+Hard+ Drive/10378/1
Done
(FIRST TIME after installing, boot will be SLOW,...normal and ignore that).
Clone APPS
Superduper does not clone the recovery partition, but that is NOT necessary if you keep the original HD as a “backup clone”. Most don’t bother with the recovery partition in a clone, however that is your prerogative.
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
(Free superduper APP above)
CCC App
http://www.bombich.com/

Using an external drive with shared files (iPhoto, iTunes), attached to a Time Capsule, can the contents of the external drive be backed-up to the internal Time Capsule drive? Perhaps a RAID1 mirror to a partition?

Using an external drive with shared files (iPhoto, iTunes), attached to a Time Capsule, can the contents of the external drive be backed-up to the internal Time Capsule drive? Perhaps a RAID1 mirror to a partitioned Time Capsule? I understand that the Time Machine (software) cannot backup a networked drive (the external) and that Time Capsule (the router/wireless hard drive) does not have its own backup software... so it won't backup the connected drive. What I would like is an alternate solution for having an automated backup of a networked drive. A 2TB Time Capsule has more than enough space for Time Machine backups of my family of Macbooks, so I had hoped to mirror a 500GB external drive (with shared media files) to a portion of the Time Capsule internal hard drive. I assume this would require a partition of the Time Capsule drive. If not, would the sparse file from the various computers being backed up need to be copied to the external drive as part of the RAID1 setup? This seems like overkill for the Time Machine backup, but it would cover the media files.

The complexity with this idea is the software has to run from a Mac computer on your network.. so you need a Mac turned on, probably most of the day.
It isn't possible to partition the TC although you can create a image area.
The software would have to copy the material, that means all files to be copied, go from USB drive, back to the Mac, then back to the TC, and written to the drive. In other words you have just added Network congestion, although a proper incremental backup type software will not actually use a lot of capacity.
Finally it will be slow.. network drives are slower than internal drives. Well USB connected drive is much slower than the same drive connected directly to the computer.. and if the drive is connected directly to a computer it can be shared with the network.
http://www.anandtech.com/show/4577/airport-extreme-5th-gen-and-time-capsule-4th- gen-review-faster-wifi-/4
Read carefully the speed of the USB drive plugged into the TC.

The delay of USRP Driver

Similar Messages

Maybe you are looking for