The delta update for the InfoCube ZCUBE is invalidated

Hi BI Experts,
I am working on BW 3.5.
For the datasource 2LIS_13_VDITM there were some requests(deltas) missing for 3 days. So I got all the documents there were missing or not updated in BW. I deleted the setup tables and filled them with the new document numbers.
I did a full repair request from the Infopackage level and the data got updated in ODS.
But the DM Status is missing for all the requests in the ODS.
And the data for the full repair request didnt get updated in the Cube and I got the following error:-
The delta update for the InfoCube ZCUBE is invalidated. The can be due to one of the following:
1. A request, which was already retrieved from the target system, was deleted from the InfoCube.
2. A request, which was not yet retrieved from the target system, was compressed in the InfoCube.
And the following delta was also not successfull.. How can I clear up this mess and ensure smooth flow of deltas. How can I set the DM status.
Thanks
Kumar

Thanks for your reply.
When I did a Full Repair Request on the ODS the data is in the New table and the DM status got reset(vanished). And the following day delta got failed( data for that request did not get updated in ODS and Cube)
How can we bring back the DM Status and make the deltas successfull.
Thanks
Kumar

Similar Messages

Last night i was downloading the new update for the Iphone, and after the download was done and trying to install, it errored out. And now my phone is stuck on the screen with the itunes icon and the USB.

Last night i was downloading the new update for the Iphone4 on my laptop through Itunes. After the download was done, it was starting to install, and then an error came up and didnt get a chance to check it. Now my Iphone is stuck on the screen with the USB pointing to the Itunes Icon and wont do anything else. Any advice on how to get this fixed, or do i need to go to the Apple store and have them look at it.

slawdog31 wrote:
Is the sleep wake button at bottom center of the Iphone or on top?
Top
iPhone User Guide

HT1688 I am trying to do the latest update for the iphone and it's telling me to restore

I am trying to do the latest update for the iphone and it's telling me to restore

If you are getting that message connect to itunes and restore.

Has anyone received the new update for the X6?

has anyone received the new update for the X6 with the updated browser? what is the firmware version?
Greece Nokia X6 RM-559 v40.0.002

I agree with Vinimutta!!
*slide to unlock with digital clock & sms & missed call notification
*support for homescreeen widgets
*qwerty keypad in portrait mode
every single update so far was pathetic attemp to fool us and make us happy.
there is no change at all from v30,31, and 32. exect the slightly smaller font for text input in v32.
nokia promises alot in the new update, (browser, smiler and map)
hope it leaves up to the expectation and include the portrait qwerty,homescreen and lockscreen.
Why is it so hard to implement?
slide to unlock and homescreen is already available in c6, and the portrait qwerty is available in 5800.
its no like we are asking for impossible like continuous autofocus for video recording!!

Hi, i need help, okay..my issues is that since the lastest update for the ipod touch, my music lihow can i get the itunes main music playlist to appear the same on my ipod touch?

Hi, i need help, okay..my issue is that since the lastest update for the ipod touch, my music list is all over the place....my question is how can i get the itunes main music playlist to appear the same on my ipod touch?

Hi Lawrence,
Thanks for your prompt response, however I have first seen it now. I have placed an active SIM card in the iPhone turned it off and on. It now says SIM locked, please write access code. The problem is I don't remember the password. When I connect it to iTunes it tell me that I have to write the password before it can be used with iTunes...... Do you have any good ideas? I see you are from the NYC area.... used to work there back in the early 90´ Those were good days..... What a City

I'm trying to download the firmware update for the WRT54G...

I'm trying to download the firmware update for the WRT54G version 6 router but I receive the error message that Internet Explorer is not able to open the internet site. It suggests that it is unavailable or cannot be found. I've tried accessing it numerous times with the same error. Any thoughts on this?

are you online through the router ?? if not , connect the computer directly to the modem and go to www.linksys.com/download to download the latest firmware for the router ..

Is there any news about when the software update for the extravert will be available?

Had the phone since November and can't send or receive media messages or go on the internet. Basically there doesn't seem to be enough memory, stripped the phone of all apps, pics,and music to free it up but still say's it full. Getting vague answers from Verizon and L.G of there will be new software soon. On the unlimited plan and can't use everything I'm paying for. Thanks

To supplement the known information about this update, I found a post from LG regarding what this update addresses:
http://www.lgforum.com/forum/boards/carriers/verizon/topics/anyone-know-what-the-software-update-for-the-lg-extravert-did-and-camera-issues
1. Memory issue
2. Fixed touch is wrong behavior
3. Add option to Re_send MMS to failed recipients
4. New PRL 57011
5. Update Opeara mini browser(189 --> 191)
6. Reset when MMS receive after Spanish set
7. Occurred noise to mono headset connect to MP3 play
As far as I can tell, the Camera issue wasn't addressed. It takes awhile for the Trouble Ticket to work it's way through the system, so maybe they didn't get it in time for this update. [...]"

Has Apple pulled the SMC update for the Macbook Pro Retina from the App Store

Does anyone know if Apple pulled the SMC update for the Macbook Pro Retina? I can no longer see it as an update in the app store. I am refering to the update that enables power nap on the Macbook Pro Retina.

It showed up in my ML App Store.
What is your SMC version?
Mine is
SMC Version (system): 2.3f28
and I don't have the update installed.
Message was edited by: psedog

Delta update for the extractor 0FC_PAY.

Dear Friends,
I replicated the SAP ISU FICA extractors 0FC_PAY. However when i am trying the delta update it shows an error:
Error Message: 'Delta-Extraction for payments is not active'.
Please Help.
sinha_s

did you check the world wide web?
http://help.sap.com/saphelp_tm70/helpdata/en/6a/e8f2f0d32243fcb986e905a3d6b087/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/5d/5dafbea009436eb019bc863a74a004/content.htm

When is the next update for the ipod 4th generation?Today is 5/7/14

i really am wondering when it is my ipod is so out of date

Hey Hhs12, If your inquiring as to wether Apple is going to release an iOS 7 for the iPod 4-- not going to happen. iOS 7 requires 512MB of RAM, only the iPod 5 has the required 512MB of RAM and there is no way to increase the RAM on an iPod. As Stedman1 stated, iOS 6.1.6 is the highest possible for the iPod 4. Hope this helps. Cheers.

HT1338 How do I get the Lion update for the HP Photosmart 3210 All in One Printer? The auto software update says none are available, while HP says one is available.

I just installed LION and no Power PC Apps work.
HP says there are updates for Lion from MAC APP store for the HP 3210 PhotoSmart All in Printer and provided instructions.
I followed these but no updates were visible or installed. Any idea why?
Is there a place where I can look at Apple for an update?
If no update is available, can anyone recommend a good flatbed scanner for under $400 that works with Lion?

Hi,
The drivers do available from Apple and your Mac may fails from getting them due to any connectivity or installed software issue.
First make sure you don't have any previous OS drivers installed:
Open Finder, then click Go > Computer and select the active volume of your OS.
(If have couple and not sure which one is correct, click the Apple icon > About This Mac.)
Open Library\Printers and move the HP folder to the trash.
Enter into PPDs\Contents\Resources, search for 3200 in that folder and move the results files.
Reboot your Mac, ensure the printer is turned on, in Ready state and directly connected to your Mac.
Enter Print & Scan, click the Plus sign and you shoud see your printer listed.. select it and click Install.
If no printers appears at all there is a connectivity issue.. ensure it is directly connected and not through any USB hub or adaptor, the cable is not longer than 2m length.. otherwise try a new USB cable.
If the printer appears but stil cannot locate drivers for yoru printer download and install the package below and then try adding the printer again:
http://support.apple.com/kb/DL907
Shlomi

How many do not like the new update for the droid maxx? How do you unupdate your phone?

The alarm clock is harder to manage. Before it was nice neat simple and easily readable. I have 4 alarms I use. I change the times around sometimes and I used to be able to see them all. I pick the one I want. Quick 2 sec change and done.
Now its large and harder to read. Go into the Alarm and you have to go around. I used to just type the hr I want or scroll up.
After selecting an alarm. When I was done. I could easily select the next one I wanted because It would revert back to neat simple view. Not now. That alarm takes up the whole screen.
When unlocking the screen I used to be able to go left to get straight to the phone. Go down for a text. Not anymore.
When in a call and I changed apps. I could go back to the phone by selecting the phone pic. The dial pad would be right there. Switch the speaker on and off.
Now once I switch out from phone and I can't get back to the dial pad.
From home screen scroll left to bring up
ringtone.
wifi
bluetooth and so on.
I select the on off for wifi in 1 second. Nope. Have to go into the option and change it.
It updated my google maps. I don't like the new one and I can't change it back to the original. On the original I used to be and to look at different options to my routing. Now thats not possible.
Hasn't any business ever heard of the term.
IF IT AINT BROKE DON'T FIX IT.

Did the issues start right after the software update?
Umm. Yeah. thats usually what happens when you update something. Things change.
I didn't say I didn't want my phone to be improved to work faster.
I did however say I didn't want it completely changed.
The look of it alone causes me headaches.
I don't want you to fix any issues other than getting rid of the update. Thats it. I will be, along with everyone else, will be happy when someone does something to get rid off this ugly looking, update.
Its simple. I just don't want the new look.
If I wanted it to look the way it does now. I would have gone to the store and bought a phone that has this look.
I like the way it was.
I did a factory reset. It does not do anything except remove the settings app and other info.
Then when the phone turned on. It started updating every single app I owned. Its trying to run up my bill.
Let me do this when I am using wifi or something. Not on my service.
Before anyone answers about this.
Go to app store hit stop. Change the settings auto update off.
Didn't work. 10 minutes later while waiting on hold I happen to look at my phone again. It started downloading them all again. I stopped them. Double checked my settings. Made sure auto update was off.
I have a few apps I don't update and they work perfectly fine.
I like them that way.
Ann154
You should also try the recent app screen/view to switch between apps and the dialer to return to the dialer screen.
Your in a phone call. Go to the home screen. Click the phone button.
3 things come up.
Use touch tone keypad.
Return call in progress.
3rd unimportant for this. I want to see the dialpad.
Option 1. Use touch tone keypad. Select to bring up the dialpad. Ok. Got it.
Option 2. Return to call in progress. Select to ring up the dialpad.....
Hmmm. Option 1 and 2 do exactly the same thing. Now whos bright idea was it to have 2 options in the same menu. To do exactly the same thing.
Why don't we just select the phone and it brings up the dialpad.
Want to add a call.
You could try the recent app screen/view to switch between apps.

I can't find the software update for the ios5 on air update

Where can I find the software update option for iOS 5 on air update on iPad2. Not able to find it in current settings menu

If it's not available within Settings->General->Update, have patience. The Apple servers in your area don't have it for your region yet.

What does the new update for the ipod do?

I keep looking. I have an Ipod from 2003 20gb. Iv'e never updated the software so I found the updates but I cant find anywhere that states what the updates do for my Ipod Im tired of looking. Please help!

Hi Jeff,
I also have an old 20GB i-Pod and I too wanted to know what was in the new version, but like you I couldn't find a list of features or bug fixes or whatever.
I was happy with the i-Pod and I believe in the old saying "if it ain't broke, don't fix it", however, I also heard that the new i-Pods have on-the-go playlists, which is a feature I would really like. So, long story short, I used the new updater, the i-Pod now runs ver1.5 but there is no on-the-go feature. I'm guessing it's not supported for my old Hardware. As a compensation, though, I swear it sounds a bit better than before - dunno if there is a new decoder algorithm in the update. Haven't really answered your question, I just want to warn you that if you want to update for a particular feature, it might not be there. Apple really should publish a feature list for all versions. Good luck Jeff.
Shane

I think the new update for the ellipsis 7 killed my tablet, please help?

I have an ellipsis 7 tablet and yesterday i decided to give it is update. my tablet started to up date and then the screen turned black. when i finally turned off i tried to turn it on, it showed the powered by android screen and then turned black while still lit up. ever since i tried to update it that is all it will do besides show me the battery symbol when i plug it in. Ive have tried everything, charging it, factory reset letting it die completely and trying to reset it, everything. Why has this update killed my tablet and can you please help?

Oh no! That's definitely not good, Krista001. We're here to help out with your Ellipsis tablet. I appreciate all the troubleshooting steps you have done thus far. Just to confirm, the alternate restart method where you hold down the power button for about 15-20 seconds did not restart your tablet like normal either?
If it is still experiencing issues, please reach out to customer service at 1-800-922-0204 for further assistance. You may also send us a DM to if you like. Please accept my Follow request, and then Follow me back. You should now be able to send us a DM.
NicandroN_VZW
Follow us on twitter @VZWSupport

The delta update for the InfoCube ZCUBE is invalidated

Similar Messages

Maybe you are looking for