The description of step 001 cannot be read
Hi All,
I have an error for all of my jobs in BW test sytem after live transport to test. The error is "The discription of step 001 cannot be read", how can I solve this issue? Do you know the way to solve it?
Points will be rewarded!!!
Regards,
Adeel
Jay,
seems data in the TBTCPV view was corrupted .. try to re-define the failing jobs thru SM36 or SM37 ..
for RDDIMPDP -- in SE38--> Run RDDNEWPP program to re-define the Job.
-K
Similar Messages
-
Can anyone help me with this problem. I tried updating the latest itunes and it caused an error MSVCR80.dll missing. I then tried fixing it after reading other people had the same problem and a solution was given about uninstaling itunes and the order in which to do that. I did that but now get the error "the files "itunes library.itl" cannot be read because it was created with a newer version of itunes. I see a solution has been given about this but I cannot find what is suggested to enable me to follow instructions. Can anyone please go through step by step (letting me know where I can find what is needed) to enable me to be able tio log into itues again. Thanks
Hi pussygalore,
If you are having issues with iTunes after an attempted update, you may find the following article helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
You may want to make sure that in the last step (reinstalling iTunes) that you are installing the latest/newest available version, and not attempting a reinstall from an older file.
Regards,
- Brenden -
I receive the message: The file "iTunes library.itl"cannot be read because it was created by a newer version of itunes. I do not know exactly what this means. I have Windows 7 on my computer and was able access itunes until just recently. I have tried uninstalling and reinstalling itunes multiple times and that does not work. Sometimes I can get in when immediately after installing, but then if I close it, i cannot get back in. Now, i can't get in at all.
That message is usually a sign that you tried to roll back to an earlier build of iTunes, but occasionally I've seen it connected to a new upgrade. This technique should fix things.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
I updated my computer to Itune 11, did not like it, and uninstalled it exactly according to directions. I re-installed Itune10.7.021 for Windows 64bit, but now I keep getting the message "The file itunes library.itl cannot be read because it was created by a newer version of itunes. How can I resolve this problem?
zepel has it, but perhaps some more detail will help.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
I Was trying to update to the latest version; i uninstall to download new version because it wasn't letting me update. Now it wouldn't open at all because "The file"iTunes.Library.itl"cannot be read because it was created by a newer version of iTunes".:( How do i go back to last install or make this new version works?
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
I had to reinstall iTunes cause during update it was shut off by mistake, now it won't come up and says,"The file "iTunes Library .itl" cannot be read because it was created by a newer version of iTunes", what do I do?
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
Recently I have not been able to open iTunes,I tried removing and reinstalling it but still won't open. I now get the message The file "iTunes Library.itl cannot be read because it was created by a newer version of iTunes. Any suggestions on how to get iTunes to work again ?
Thanks
<Edited by Host>Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
When I try to open itunes i receive this message.
The file itunes library.itl cannot be read because it was created by a newer version of itunes.Good morning Thunt66,
Welcome to Apple Support Communities.
You may want to try the steps in this article to re-create the iTunes Library file:
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/ht1451
Have a great day,
Jeremy -
I keep on getting the following message:
the file itunes library.itl cannot be read because it was created by a newer version of itunes
This is occurring on a Toshiba laptop running Windows 7. It appears no one has ever encounted this problem using a Windows 7 system judging by the lack of threads devoted to discussing this issue. Is this the end of the road for my participation in the Apple world, or is there a possible fix for this problem?
I run iTunes on my computer, on my iPad 2, and on my iPhone 4S.
Sincerely,
Ralph W.Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
After having upgraded my MacBook to Snow Leopard, the following error message pops when I try to access iTunes: "The file iTunes Library.itl cannot be read because it was created by a new version of iTunes". So, now after the upgrade, I cannot access iTunes. How do I resolve this??
Thankszepel has it, but perhaps some more detail will help.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
When I try to access iTunes I get 'The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes. Would you like to download iTunes now?'' But when I try to down load I get "unknown error occurred (-42408)". Don't know what to do next and I can't get into my iTunes library. (I have an iMac, OS10.6.8.)
Did you uninstall iTunes 11 and replace it with iTunes 10.7? If so, you'll need to go through a few steps to put things right:
Rename "iTunes Library.itl" to some other name;
Copy newst ITL file from the "Previous iTunes Libraries" folder into your main iTunes folder and rename it to "iTunes Library.itl";
Download iTunes 10.7: http://appldnld.apple.com/iTunes10/041-7195.20120912.d3uzQ/iTunes10.7.dmg
Download/install shareware app called Pacifist;
Open Pacifist and, separately, mount iTunes DMG file -- drag iTunes PKG file into Pacifist and install iTunes via the Pacifist application -- be sure to answer yes to replacing everything Pacifist asks about;
Enjoy iTunes 10.7.
Cheers,
trane -
While downloading the latest iTunes version, my computer turned off. When I opened iTunes, it says that "The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes" Help please
That message is usually a sign that you tried to roll back to an earlier build of iTunes, but occasionally I've seen it connected to a new upgrade. This technique should fix things.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
Hello i am having trouble opening itunes on my laptop. i have downloaded it and set it up but when i try to open it i get a message as above....the file itunes library.itl cannot be read because it was created by a newer version of itunes...i have no idea what to do can someone help me plese
Normally this message appears if you try to install an older version of iTunes. Occasionally it can be triggered by a damaged library database. This method should get things working again.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
I just installed iTunes on my new laptop. When I click on the desktop icon I receive a pop up that says "The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes". I have no idea what this means or what to do about it. I can't even find a file on my computer like the one referred to in the pop up. I am currently considering keeping my old laptop if it is the only way for me to continue to access iTunes. What should I do to fix this?
What version of iTunes are you using? An .itl file is something that Windows uses, or very old versions of iTunes on Mac. The library file on Macs is now .xml and has been since late iTunes 4.
Is iTunes running ok without any problems after you OK that message? If it is, then you may be able to ignore it if you can't account for why you're getting it. But make sure you take backups in case something happens in the future. -
My windows pc is showing an error message "The file iturnes library itl cannot be read"
My windows pc is showing an error message "The file iturnes library itl cannot be read because it was created by a newer version of itunes". I have not downgraded my itunes or done anything with it other than follow standard download instructions .I have an ipad one and iphone 3g, neither work now help?
The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes".
Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash
Maybe you are looking for
-
Macbook pro for lightroom editing?
Hi all I am considering buying a 15 inch macbook pro with retina display to edit my pics in Lightroom but have some questions. I know that laptops are not ideal for photo editing but while I am a serious-ish photographer, I am not a professional and,
-
I am using FRS, how do you select all the level 0 member of say Service Depts ? I tried doing the Descendants Inclusive of Service Depts, Sames Level as Service depts using Operator " and" and I got the error message when I try to view the report an
-
OfficeJet 6500 Wireless E709n - faulty yellow cartridge sensor - How do I print black only?
Product is 5 years old. Error message states that the Yellow Cartridge appears to be missing. Unable to resolve following multiple Sensor and Sensor Window cleanings. Powered off/on several times including pulling plug. Attempted one new Yellow Car
-
Goods receipt on behalf in EBP
Hello all, I try to set up the shop-on-behalf function in the way that same user can both create a shopping cart on behalf and also goods receipt the SC on behalf. I think there is a workflow I have to activate so I can goods receipt on behalf. To cr
-
New to iMac. Running 27in and monitor resolution set at "Best for Display 2560X1440". Having problem getting Web pages to display properly. At this resolution, page display is not good. Spacing is not correct to see all information. Changed reso