"The Destination Directory Could Not Be Determined For Photo Delluxe 4.0"

I Downloaded Adobes Photoshop from thier Site.
When trying to install pdx401upus.exe,
it will open up the Installation Wizard and then I get the Following "Warning" Message....
"The Destination Directory Could Not Be Determined For Photo Delluxe 4.0"
it just gives me a box to check that says "OK", and then the Wizard Shuts down.
Im running an HP Computer with Windows 7, Tons of HD Space, Ram, Memory ect.
I love using Adobe Photoshop, but since I got this new computer,
my Adobe Photoshop install disc seemed to be too old (Windows 95),
and therefore would not load to my new Computer/Operating System.
Any pointers, Websites, Instructions would be greatly appreciated.
Although I'm not a "Computer Dummy" I know just enough to get me into trouble, so the simpler the instructions....the better.

I am sorry Wwotr but I have not observed a user who has successfully installed and used Photo Deluxe on Windows 7.  Since Photo Deluxe we have released 10 versions of Photoshop Elements.  I would recommend utilizing the trial of Photoshop Elements 10 and seeing if that will fullfill your needs.  You can find more information at http://www.adobe.com/products/photoshop-elements.html.

Similar Messages

  • Error:The grouping element could not be determined for project

    Hi,
    When I am trying to issue goods for a project,I am getting the following error
    "The grouping element could not be determined for project 1., plant 2., and MRP group 3.."
    what may be the reason for this reason.
    Regards,
    Raju

    Hi,
    You are using Automatic Requirement Grouping in your project and there is some issue with the Material Master,please check the Material Master Views.
    Muzamil

  • Error "codepage could not be determined for the receiver-system"

    Hi,
    we use the idoc-adapter to send message from mySAP ERP to PI.
    All worked fine.
    So, this morning I have changed the datatype of the messageId from "char" to "int" in mySAP ERP in the customizing menue (install param). So, no message received in SAP PI.
    When I start transction "we05" in mySAPERP" I get the following error:
    "codepage could not be determined for the receiver-system" status 02.
    I have changed the datatyp to "char" but the same probleme
    Can anybody help me please?
    Regards
    Stefan

    This error shouldn't occur unless there is some modification at the OS level codepages.
    Please check the entried in the RFC destination for connecting to the XI system. Unicode settings.
    Regards,
    Prateek

  • IDoc type could not be determined for the IDoc

    I am trying to Post the payment run through the transaction F110.
    In the payment run log i get the following message:
    "IDoc type could not be determined for the IDoc"
    But in fact the IDoc is generated and it is displayed in We05.
    I have configured the Message type PAYEXT-PEXR2002 and EUPEXR-IDCREF01 both for the partner.
    Has anybody Idea about why this error is coming and how i can resolve this?
    This is important because in Payment run log, they need to know the IDoc number generated for that run, else it may become difficult for user to identify which IDoc was created for a particular payment run.
    Would appreciate if anyone can please help on the same.
    Thanks & Regards,
    Narayanan

    Hi,
    If you are paying the payment through F110, if the payment exceeds the limit what you are spefied in available amounts in FI12 screen. First Please check this screen.
    still if you are having any problem
    Check in the below path:
    IMG- Financial Accounting (New) - Accounts Receivable and Accounts Payable - Business Transactions - Release for Payment - 1. Create Workflow Variant for Release for Payment
    2. Assign Release Approval Procedure for Release for Payment
    3. Define Users with Authorization to Payment Release
    Thanks
    Chandra

  • IDoc type could not be determined for the IDoc in F110

    Dear All,
    The below mentioned error is encountered by us in F110.We have check all the setiing  and not able to find the solution for this error.
    Now our heads has gone for a toss....can anyone kindly suggest what and where we have missed out.
    The system is not creating the IDOC file.....
    IDoc type could not be determined for the IDoc
    Message no. B1090
    Diagnosis
    The IDoc passed to the ALE layer could not be processed. The specifications passed in the control record were not correct.
    The basic IDoc type (field EDIDC-IDOCTP on the outbound side or EDI_DC-IDOCTYP on the inbound side)has not been specified for this IDoc.
    The attempt to read the basic IDoc type from table EDIDO also failed. No table entry was found for IDoc type  from field DOCTYP.
    Procedure
    Possible error sources:
    - The calling program did not provide values for the fields specified above correctly. Make a note of the transaction in which this error occurred and consult your ALE administrator.
    - The IDoc type  is not known in your system and must be maintained.
    Kindly do the needful.
    Regards

    If you want to create IDocs from the proposal run, outbound parameters (we20) with the 'Test' flag are required in addition.
    see OSS note 504230 : Message EUPEXR forms the logical unit around the individual payment messages (PAYEXT IDocs). The E1IDRD1 segments contain the IDoc numbers of the payment messages in field DOCNUM. Segment E1IDRS1 contains check sums (total of all amounts, account numbers, bank numbers, number of payment messages). This information is provided for the EDI subsystem. Set up EUPEXR In Transaction WE20 for the partner profile for the house bank, create the outbound parameters for message type EUPEXR with IDoc type IDCREF01. If you want to create IDocs from the proposal run, outbound parameters with the 'Test' flag are required in addition.

  • Alchemy for xfi - the product state could not be determined (error 6

    as the title states I have xfi platinum & installed alchemy for xfi, tried to start it & I get "the product state could not be determined (error 60)" I click any of the links & it takes me to the buy page for the audigy alchemy. I've tried uninstalling & reinstalling multiple times, also uninstalled & reinstalled my xfi drivers. No change. I can enter anything into the entry field on the activation page & It'll advance me to the next page, then when it goes to connect to creative to register. I get another error. "an error occurred while attempting to connect to the internet. (00000)" I dont have anything blocked regarding this program & have tried with my firewall disabled. Please. Help

    Well I didnt follow the link, but a kind person did download an update for Windows for me, if i can find link i will post it is from USA, took over 2 hours to install/update but appears to fix this problem, i now have all the bits that windows left out back on pc, so there is a solution out there, i know the site it came from there had been 80,000 downloads in over 2 days.

  • Withholding tax -number could not be determined for numbering group ID0017

    While positing the FB60 transaction with withholding tax for country Indonesia, the below error is coming:
    A number could not be determined for numbering group ID0017
    Message no. 7Q630
    "The system could not determine a certificate number for the numbering
    group.
    Withholding tax types exist that are relevant to numbering. The system
    cannot determine a certificate number because the Customizing settings
    are incomplete.
    Sysem Response
    Payment cannot be made.
    Procedure
    Check the number ranges in the numbering group."
    Already seen the wothholding tax number range and it is coorec. Please advise how to resolve.

    Dear,
    Please check whether you have assigned the number range to the number group in the below setting
    Spro
    Financial Account Global Setting> Withholding Tax>  Extended Withholding Tax> Posting> India> Remittance Challan>     Assign Number Range to Number Groups

  • Customer/vendor could not be determined for intermediate document

    does any one know how to solve this problem, i got this error for an inbound idoc 820 (remmitance advice).

    Hi rob,
    Message no. FD017
    This is the following message:
    Customer/vendor could not be determined for intermediate document 0000000000047039
    Message no. FD017
    Diagnosis
    Several procedures are defined for determining the partner (customer or vendor):
    1. The customer/vendor can send his/her account number (the account
       number in our system) in the address segment.
    2. The customer/vendor can send his/her account number (our number at
       the customer or vendor) in the address segment.
    3. Only the name in the address segment clearly identifies the
       customer/vendor. In this case you can create an allocation within
       intermediate document customizing (IDoc base -> Control -> Forward
       inbound).
    4. The customer/vendor is determined using his/her bank details (only
       for the "INVOIC01" intermediate document type).
    5. The customer/vendor is taken from the control record of the
       intermediate document.
    For 1.-3.: One of the address segments with the partner functions
               "II", "RS", "SU", 'SE' ("INV_ID01"), or "RS" or
               "LF" ("INVOIC01") is used for determining the
               customer/vendor.
    Procedure
    Create the customer or vendor within Financial Accounting or maintain his/her bank details.
    Create customer         - Proceed
    Customer bank details   - Proceed
    Create vendor           - Proceed
    Vendor bank details     - Proceed
    If the customer/vendor can only be determined using his/her name, create a record within intermediate document customizing with
    logical address = name, application = "FI" or "MM" and physical target in the SAP system = customer number/vendor number.
    Proceed

  • Customer/vendor could not be determined for IDOC

    Hi all,
    Am trying to post incoming payments through EDI ..
    IDOC Information
    IDOC type: PEXR2002
    Message type: REMADV
    Function Module: IDOC_INPUT_REMADV
    Process code: REMA
    Am getting these 2 errors :
    Customer/vendor could not be determined for intermediate document
    Company code could not be determined for intermediate document
    Has anyone encountered this problem, if yes can anyone suggest the solutions, any help regarding this is highly appreciated.
    Thanks.

    Hi,
    Currently I am facing with the same type error when trying to post incoming payments through EDI.
    IDOC Information
    IDOC type: PEXR2002
    Message type: REMADV
    Function Module: IDOC_INPUT_REMADV
    Process code: REMA
    I am getting the below error:
    1. Company code could not be determined for intermediate document
    I have maintained record records for partner type and partner number in OBCA.
    Please advice what are the other configuration changes do I need to maintain.
    Your assistance would be highly appreciated.
    Thanks.
    Edited by: Victor Collins on Feb 27, 2009 9:31 PM

  • Company code could not be determined for IDoc #.......

    I was trying to generate an IDoc manually by using the tcode WE19. I have manually keyed the data in to the respective segments for the basic type PEXR2002 and message type REMADV. After this while processing, the IDoc is getting generated, but not posted OK. I am getting the following two error messages 51 stating:
    'Company code could not be determined for the IDoc #....'
    'Customer/vendor could not be determined for the IDoc #.'
    Can any one give some inputs on this issue?
    Shaji
    Message was edited by: Shaji Thomas

    Hi Shaji,
    You may look at the OSS note 316811.
    Thanks
    Vinod

  • PY error message - EE's salary group could not be determined for Plan Life

    We are running through Payroll errors when there is a Separation action being carried :
    u201DEmployeeu2019s salary group could not be determined for plan LIFEu201D.
    On IT0168 the costs  are u20180u2019
    This has to be resolved ASAP. Any inputs/ advise is greatly appreciated.

    During the "Separation" action, does the employee change WT on IT0008?
    If so, it could be that the Life Plan's Calculation Base does not include that WT (and check the IMG under Payroll > Benefits Integration > Define WageTypes for Benefit Plans)

  • Currency could not be determined for person ?

    Hi,
    I have created in PA30 the "compensation process" subtype " Spot bonus" for an employee , but then when i changed the status in ECM ( Enterprise compensation management) ( From In planning -> Approved ,( OK) , Approved to " Active" I got the following error"
    "Currency could not be determined for person Nguyen Ngoc Ngan between 30.10.2007 and 30.10.2007"
    Please help me out with this
    Thank you very much

    Great Suresh , You are excellent !
    I have added a new record in the table T500C for my local currency i have tested successfully .
    But i face a small problem with " Salary adjustment" when i created in compensation process infotype the salary adjustment ( In planning ) it is ok , but when i change the status from "Approved to active " I got the following err ;
    "Salary adjustment of Nguyen Ngoc Ngan on 31.10.2007 could not be activated "
    ( Bonus worked fine ).
    Thanks

  • Exchange 2010 - The certificate status could not be determined because the revocation check failed.

    I have tried everything I have found online to get my DigiCert to work.
    I have exported the cert and imported it into my child domains and they look perfect.
    It is just my parent domain having issues.
    netsh winhttp show proxy
    does show my correct proxy server for http and https and port 8080
    I have tried name, FQDN and IP address.
    In the Bypass-list I have tried none, *.domain.com, and a list of all domains and child domains in my forest.
    I have flushed the cache
    certutil -urlcache crl delete
    certutil -urlcache ocsp delete
    and rebooted the Exchange 2010 (Windows 2008 R2) server
    No matter what, I still see in my Server Configuration for the parent domain's DigiCert cert the message
    The certificate status could not be determined because the revocation check failed.
    with a red X on the left hand icon.  Again, Child domains all say "The certificate is valid for Exchange Server usage."
    Note: In spite of having the red X, I was able to assign via EMS the services.
    Webmail works fine.  Outlook Anywhere fails... I suspect it is due to my red X problem.
    Suggestions?
    Thanks in Advance
    Jim.
    Jim.

    I have contacted DigiCert and they said the cert is working per their utility, hence the problem is outside the scope of their support.
    I have followed, several times, http://support.microsoft.com/kb/979694
    http://www.digicert.com/help/  reports all is well.
    The DigiCertUtil.exe reports all is well and happy.
    I have run
    netsh winhttp set proxy proxy-server="http=myproxy:8080;https=myproxy:8080" bypass-list="*.mydomain.com"
    Current WinHTTP proxy settings:
        Proxy Server(s) :  http=myproxy:8080;https=myproxy:8080
        Bypass List     :  *.mydomain.com
    I have flushed the cache using the commands
    certutil -urlcache crl delete
    certutil -urlcache ocsp delete
     I still see in my Server Configuration for the parent domain's DigiCert cert the message
    "The certificate status could not be determined because the revocation check failed."
    with a red X on the left hand certificate icon. 
    To verify the cert via command line:
    certutil -verify -urlfetch c:\mail_domain_com.cer
    LoadCert(Cert) returned ASN1 bad tag value met. 0x8009310b (ASN: 267)
    CertUtil: -verify command FAILED: 0x8009310b (ASN: 267)
    CertUtil: ASN1 bad tag value met.
    I suspect this is why I cannot get Outlook Anywhere to connect.
    Child domains show a happy certificate icon. Parent domain does not.
    Still scratching my head.
    Thanks all!
    Jim.

  • The cartridge directory could not be found.

    Error:
    "We couldn't get data from the Data Model.  Here's the error message we got:
    The cartridge directory could not be found.  Use the Windows Installer to repair the application.  Exception of type 'Microsoft.Office.PowerPivot.BackEnd.StorageException' was thrown."
    Using Office 2013 Standard Edition.
    Ran the Windows Installer repair on Office.
    I get this error when I attempt to execute Globals.addin.ActiveWorkbook.RefreshAll via an application-level add-in.
    I Bing'd the error and came up with nothing (thanks, Bing).
    Has anyone seen this error and/or can make any suggestions?
    Thanks.
    Ross

    Hi,
    >>We couldn't get data from the Data Model
    Have you tried to use the hotfix to resolve this issue? You can download it and fix your application.
    https://support.microsoft.com/kb/2837666
    And  Excel will crash if you have recently applied updates for the PowerPivot add-in, but have not also updated Excel.
    To resolve this issue, you should apply this update together with the update from KB
    2850006
    https://support.microsoft.com/kb/2850006
    Best Regards
    Lan
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Error Log: The Billing Type Could Not Be Determined

    Hi Experts
    I have to produce the credit note sebsequent to the return.  But I am getting the "Error Log: 0084001006 0000 The billing type could not be determined".  Kindly help me with the solutions
    Thanks and Regards
    M.Dheerendar Jain

    Hi,
    Please check copy control VTFL for delivery and billing type
    go through the routine 350 (VAT Determination) whteher it is applied in ite category.
    if yes, then you have to configure the VAT Invoice type determination.
    also maintain the entries in below tables:-
    J_1IDCLSDET &  J_1IBILDET
    Even if the above entries are already maintained then check the supplying and receiving plant entries
    for the billing.
    To maintain entries in table go to t-code SM30.
    and put the above table in the "Table/View" it helps to determine FVAT Invoice types
    Invoice types determined based on supplying and receiving plant.
    Kinldy check and confirm.
    Thanks & Regards,
    Rahul Verulkar

Maybe you are looking for