The determined activity date 03/24/2009 must be later than the system date

Hello everyone!
I am creating a contract but this error message appears when I put a validity date: "The determined activity date 03/24/2009 must be later than the system date". Where in IMG can I adjust this? Thank you.

no one responded.

Similar Messages

Request end must be later than req start date

Request end date must be later than request start date
Any explaination, what configuration I need to carry on to clear the issue
Regards,
Ajay

Hi,
I am also getting same error while I create a new service request. I have assigned the date rule for both start date and end date. Request start date is today's date and end date is today's date+3 days. i can see the dates on screen, but still when I save I am getting Requested end date must be later than requested start date. Please let me know am I missing something here.
Regards,
Reddy

Requested end date must be later than requested start date

Hi,
I am getting an error after the creating the support ticket as "Requested end date must be later than requested start date".
Please advise the solution.
Regards,
Rajesh Kumar.R

Hi Raj,
If you look for this message in DEBUG, youu2019ll find, that it is raised in functional module CRM_DATES_SERVICE_IR. That FM is called if your date type equals to constants GC_APPOINTMENT_TYPE-SRV_CUST_BEG (SRV_CUST_BEG) or GC_APPOINTMENT_TYPE-SRV_CUST_END (SRV_CUST_END).
So, I can say that itu2019s some kind of standard check inside CRM core, and you canu2019t turn it off.
And the workaround variants are listed earlier:
-     You can fill the date SRV_CUST_END with some rule as Mohammed has suggested (even with dumb ISM_INFINITE which will put 31.12.9999 and it will be obvious that user didnu2019t change it)
-     You can move to Z* date types, like you said, and checku2019s wonu2019t run
-     And finally, you can try to delete this error message using BADI method CRM_APPT_CHECK_DEPENDENCIES, CRM_APPOINTMENT_BADI (as I remember it runs after this standard check). But I wouldnu2019t recommend doing it, because CRM_DATES_SERVICE_IR could be called not only in this moment and errors could appear in random placesu2026
Best Regards,
Vadim Shmarin

IRecruitment Candidate Date To must be later than or equal to Date From.

Dear All,
When I am updating any field in personal information in on my Account page in IrcVisitor.jsp as external user the system gives me error "Date To must be later than or equal to Date From."
We are working on 11i apps.
Please reply...

1. Bounce Apache, clear cache and check that the issue is still there. When you bounce apache, make sure to bounce the external tier also if it's a separate server.
2. Check that the flexfield you have personalized is the right one. Simple check is to remove a segment from the list, come back to the page and choose the country for which you removed the segment.
3. If both the above don't help, please post the name of the item you are personalizing, the page and the flex segments list.

Requested end date must be later than requested start date in Service Request

Hello Experts
I am getting this error in the service request when the date displayed in UI is
Requested start date-06.05.2014
Requested End-08.05.2014
I have searched this error in the SCN, many people have posted this error . I have not got any satisfactory answer in the posts. I am attaching screenshot in the post.
I am configuring the service request.Please reply as its urgent
Thanks all of experts in advance

Hello Ashik
I am facing a new problem please help
I am currently working on service request.I am facing a problem in the date management there.In my service request i have 5 statuses .One of my status is "Pending with consumer".I am using duration settings of service request.By duration settings , i am calculating the duration for which its pending with consumer.I am having 2 response profile one is 24*7 and other is having 9 working hours.In the service request from the SLA configuration i am calculating the escalation date & Time .I need to add the pending with consumer duration with the escalation date and time.I am facing a problem , i am explaining whole problem ..
Let say if the pending with consumer duration is 1440 minutes(that is 24 hours) .I am adding the minutes to the escalation date through the date rule.
I am facing problem that if the service profile is 24*7 then there is no problem but if it is having the 9 hours working service profile then after adding the minutes to it the escalation date is changing to 4 days ahead which is wrong.
I need to add only those minutes for which it is pending with consumer in working hours for the 9 hours service profile
I need to dynamically determine the working hours from the duration then add it to escalation dates when the status is changed from pending with consumer.
Please suggest a badi will work or how to do it.Its urgent as i need to give demo.I will appreciate a quick reply.Please reply

How do i determine the date of activation of active data in DSO?

Hi,
I just want to know how do i determine the date of activation of active data in a given DSO?
thanks,
yoly

Hi,
if you are using BI 7.0 than you use RSA1.
Select the infoprovider you want to check.
Right mouse click and select manage.
Click the Contents tab.
Click on the logs button lower left part of the screen and select Activation of Loaded DSO Data.
This should give you the information that you are looking for.
regards,
Raymond Baggen
Uphantis bv

The activity procedure date must be larger than the system date in VA42

Please Help me...... I am trying to update the Contract End Date in VA42 but it is not updating and through an error message
''The activity procedure date must be larger than the system date''
please help me to solve the issue....
Thanks & Regards
Shakeel

Shakeel Ahmed Mohammed
Please update how you solved so that it will be helpful to others who face similar issue.
G. Lakshmipathi

Info about the log traces in Activity Data Collector

Hi,
I have configured the activity data collector by setting the following properties in ADC and restarted the service
Activate Data Collection :true
Additional File Formats: --(not set anythng left blank)
Base File Name: Portal Activity
Directory Name: portalActivityTraces
File Encoding : UTF-8
Hour in the day to close all files, in GMT : 0
Main File Format : %Orfo.t(dd-MM-yyyy HH:mm:ss,GMT+5.5)%%Stab%%Orfo.ct%%Stab%%Orfo.in%%Stab%%Orfo.un%%Stab%%Orfo.bt%%Stab%%Orfo.pu%%Stab%%Orfo.rh(referer)%%Snl%
Max Buffer size :500KB
Max File Size : 10240 KB
The files are created in the folder called "Portal Activity Traces" But the issue is with the name of the log files getting created
Since i have not set any additional file formats, The log files consist of main file formats
the file names are like this
portalActivity_29893750_1254305061537.txt.open in this
wat does the time stamp "1254305061537" refer? Plz explain
some files are of type text document and some are of type "open" wat does tis mean?
If i set t "Hour in the day to close all files"
to 0 wen does it write the log files? Is it at 12? after that will it create a new file?
n in the main file format i have set the time to GMT5.5 (since IST is GMT5.5) but im not getting the proper time format
Plz help me out
Thanks in Advance
Regards,
Sowmya
Edited by: Sowmya B on Sep 30, 2009 1:43 PM

Hi Prasanna,
Thanks for the reply.
Actually there are about 3 to 4 files which are of type .open and they have created long back.Are those files still getting populated.If we set the "hour to close all files" to 0 it should close the open files and create the new(fresh) files for the next day right?
According to the documentation in help portal, "Files may be closed before reaching this limit(Max File Size), as all files are closed at the hour specified in the Hour in the day to close all files property."
Then how come some old files are still getting populated?
Midnight means wat time in particular? Plz explain
About timestamp is it the time the file was created in some format?
If anyone knows plz explain the format of timestamp
Edited by: Sowmya B on Sep 30, 2009 2:13 PM

To know how to find the Creation date, Assignement date and Activation date

Hi All,
    Can you please guide me to find the answer for the below mentioned questions:
Apart from Change log ,
1, Creation date
     May I know is there any approach to find the Creation date of a particular Pricing condition type.
2. Assignment date -
    How to find the assignment date of a particular condition type to a pricing procedure.
3. Activation Date -
    May I know is there any to find out the date of Activation for the Customer hiearchy in T code VDH1N
Presently I'm working on SAP ECC 6.0For the above question I tried T codes and table but I'm not able to find out exactly. Even in Change logs I'm not able to get it.
Can you please guide me where I'm missing.
Thanks in Advance
Thanks & Regards,
Pugal

Hi,
Something like this
select table_name, created from user_objects where object_type = 'TABLE'Regards
Anurag Tibrewal
Oops: I did not see the requirement correctly. If auditing is not the option for you then logminer (if archive is present) else no other option i can think of.
Edited by: Anurag Tibrewal on Oct 6, 2009 8:37 PM

"#" in the ODS active data view

Hi all,
I have a question. I load data (text strings) into ODS object. Then I look into new or active data and I can see symbols "#" on the places in strings, where occurs any special character (for example from any language). I do not know wheteher it is stored in SAP (database) in this bad format or wheteher it is only represented in this bad format due to my different encoding ?? Normally special characters are represented in GUI well. Thanks
JJ

Hi JJ,
as you can see them in the middle of the texts, it just the way BW displays these characters.
Siggi

What are the pros and cons using Active Data Guard vs Data Guard?

My understanding is that Active Data Guard is an additional database option for Oracle 11gR2 Enterprise Edition. I need to know the pros and cons using Active Data Guard vs Data Guard in order to decide whether to get pay extra for the Active Data Guard.
Thanks for any help.

Hemant K Chitale wrote:
Before jumping in to Active Data Guard, one needs to evaluate :
a. Is there really a need to run queries on the Standby ? The Standby could / should be at a remote site so queries are "across the network". Depending on the nature of the queries and the volume of output, the "performance" of the queries may not seem to be the same.
b. If the database is not in Maximum Protection mode, the data "seen" at the standby may not be in "real-time" synch
c. Not all applications are truely read-only when querying. Some applications use "jobs" that write to tables when querying. Such would not work with Active DataGuard. (example : EBusiness Suite). There are very complicated ways of handling this -- and one needs to consider if the complications can be introduced and supported.
Over the network accessing standby read only is really not an good idea, I think no one will compare performance with primary and standby,
But some of them they want to validate data which are very critical, as it is matching with primary or not, Its an added advantage with ACTIVE DATAGUARD
Prior to that until unless stop MRP, open database and then we need to validate, So there is an interruption of recovery, I can say its also an advantage where there is no interruption of recovery.

Terms of Payment to determine due date as last date of the month

Hi Experts,
Does any one know how to configure a Terms of Payment to determine due date as last date of the month ?
I tried by puting fixed date as 31 in the Terms of Payment in FI but when I am creating in FI-CA it gives me an error "_Term of payment Z003 is inconsistent/not planned_"
Please advice.
Thanks & Regards
Satyajeet

Hi Satyajeet,
It seems the settings that you have maintained in FI are correct.
When you are assigning the payment terms in FI-CA, you need to assign a factory calendar as well to the payment terms in the following config-
IMG->Financial Accounting ->Contract Accounts Receivable and Payable->Postings and Documents->Document->Maintain Payment Terms
If you have already assigned the factory calendar and still the problem persists, can you give the message ID and the message number of the error that you are getting?
Thanks,
Amlan

Differences between the Portal Data Collector and the Activity Data Collect

Hello,
I want to know what are the differences between the Portal Data Collector and the Activity Data Collector?
Best Regards.
Pablo Mortera.

All of my SQL Server instances are sql server 2008r2 standard edition(10.50.2500). MDW is existing database, I try to setup collection sets for multiple instances and store data in one central MDW database
I create MDW in one instance, then run run configure Management Data Warehouse in target intance. collection sets were created successfully, but job failed with following error:
Executed as user: COCAD\INTDEPT01SQLAgentC10. The Management Data Warehouse version "00.00.0000.00" is not supported by the current data collector. Please upgrade the Management Data Warehouse by running the Management Data Warehouse Configuration
Wizard. Process Exit Code 5. The step failed.
Thanks
PAULqaz

I want to know the activation date.IMEI:990001875982779.Please!

I want to know the activation date.IMEI:990001875982779.Please!

What is too complex? If you said that you are in China, then look up about how to contact Apple China. If you look at the online Apple stores, then there is a China online store.
You managed to find these forums okay so exactly how hard can it be?
User forums are here for advice, not to do everything for you because you can't be bothered.

To find the latest active date in case if any gap occurs

Hi Experts,
I've to find the active date if employee is on leave, any kind, and joined again.
Is there any FM exist to find out the last active date before the gap??
Regards,
Jyoti Shankar

It would be worth chatting to someone functional in the HR area of the company that you are trying to do this for, as there are many different ways that have been implemented at different sites to say when exactly an employee started/finished.
Many companies will use IT0041 rather than relying on IT0000 because of the payroll complications that occur with making changes to IT0000 - not to mention that it is rare that a company has been on SAP HR so long that the IT0000 start dates actually reflect employee hire dates (normally a large part of them will reflect system cut-over date).
Also, many companies have taken the approach of using a new employee number when a person re-joins the company and just using a reference personnel number to copy the common data. In this case using IT0000 is not very useful.
Like was mentioned above, you're going to have to code something yourself, but it's worth finding out what the local processes for your company are first!
Hope this is helpful,
Chris

The determined activity date 03/24/2009 must be later than the system date

Similar Messages

Maybe you are looking for