The device does not appear in the application find my iphone

The device does not appear in the application find my iphone. Because of this I can not lock my ipod 5

Try
iCloud.com from a computer
      Select the Find My iPhone green circle
           Top center select All Devices
Note is it shows here you can remove it from here too.
If it's not there it's linked to a different Apple ID

Similar Messages

  • My device does not appear in the iTunes window.  Instead a separate window opens so I cannot sync

    My device does not appear in the iTunes window.  Instead a separate window opens so I cannot sync my device.  I have tried with both my iPad, my iPod and my iPhone.  In each case a separate window opens showing that it is fully connected to the computer, but it does not open in iTunes. 
    I have followed previous instructions to stop then start the device manager.  I have even uninstalled then reinstalled iTunes, but no luck.  Can someone help??

    Hello Linda Lev,
    It sounds like Windows recognizes that your devices are conneted, but iTunes does not. I recommend the troubleshooting from the article named:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • HT4259 I have my airport extreme plugged in within range but the device does NOT appear in airport utility (on the left).  Please advise.

    To extend wifi range, I plugged in my airport extreme within exisitng range but the device does not appear in my airport utility (on the left of the screen).  The airport extreme is blinking amber.  Please advise. Thank you.

    The AirPort Extreme can extend the signal from another Apple router wirelessly, so as long as you have a 802.11n version of the products, the extend function should work.
    Please check to locate the Model No of both of your AirPort routers. It will be on the bottom of the device. Starts with an "A" followed by four numbers, as in "A x x x x".
    Post back with that info.
    We also need to know the version of AirPort Utility that you are using. If you are not sure, click the AirPort Utility menu in the upper left corner of the screen, then click About AirPort Utility and post back with tht info as well.

  • Been using an Avastor HDX-800 for storage and backup, also a SUPERDISK for smaller stuff; recently the SUPERDISK does not appear on the screen, and the light blinks while you hear it spin, also the Avastor has started to have the same problem, both USB

    Been using an Avastor HDX-800 for storage and backup, also a SUPERDISK for smaller stuff; recently the SUPERDISK does not appear on the screen, and the light blinks while you hear it spin, also the Avastor has started to have the same problem, both USB conncected, both worked well before, but both now spinning, blinking, and not showing up on the screen as before,
    Interestingly they both appear in the System Profiler, but just not working the same as before
    I have tried other USB ports, but the same responce,

    yes I did reset the PRAM, but no benefit, still the same problem
    my usb devices are:  keyboard, mouse, printer, SD-USB-M3, and LaCie d2 DVDRW:
    the mouse and printed are plugged into the keyboard: i have tried to move, these around, and have even tried just the mouse, printer and SD-USB-M3, but still the same problem
    here is a cut and paste of the current  "System Profiler>Hardware>USB"   (usb device tree)
    USB Bus:
      Host Controller Location:          Built In USB
      Host Controller Driver:          AppleUSBOHCI
      PCI Device ID:          0x0026
      PCI Revision ID:          0x0000
      PCI Vendor ID:          0x106b
      Bus Number:          0x18
    Hub in Apple Pro Keyboard:
      Version:          1.22
      Bus Power (mA):          500
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Mitsumi Electric
      Product ID:          0x1002
      Vendor ID:          0x05ac  (Apple Computer, Inc.)
    HL-1270N series:
      Version:          1.00
      Bus Power (mA):          100
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Brother
      Product ID:          0x0008
      Serial Number:          L9J286292
      Vendor ID:          0x04f9
    Basic Optical Mouse:
      Version:          0.00
      Bus Power (mA):          100
      Speed:          Up to 1.5 Mb/sec
      Manufacturer:          Microsoft
      Product ID:          0x0084
      Vendor ID:          0x045e
    Apple Pro Keyboard:
      Version:          1.22
      Bus Power (mA):          250
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Mitsumi Electric
      Product ID:          0x0204
      Vendor ID:          0x05ac  (Apple Computer, Inc.)
    SuperDisk USB 120MB drive:
      Version:          0.0e
      Bus Power (mA):          500
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Imation
      Product ID:          0x0002
      Vendor ID:          0x0718
    Hub in Apple Pro Keyboard:
      Version:          1.22
      Bus Power (mA):          500
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Mitsumi Electric
      Product ID:          0x1002
      Vendor ID:          0x05ac  (Apple Computer, Inc.)
    HL-1270N series:
      Version:          1.00
      Bus Power (mA):          100
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Brother
      Product ID:          0x0008
      Serial Number:          L9J286292
      Vendor ID:          0x04f9
    Basic Optical Mouse:
      Version:          0.00
      Bus Power (mA):          100
      Speed:          Up to 1.5 Mb/sec
      Manufacturer:          Microsoft
      Product ID:          0x0084
      Vendor ID:          0x045e
    Apple Pro Keyboard:
      Version:          1.22
      Bus Power (mA):          250
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Mitsumi Electric
      Product ID:          0x0204
      Vendor ID:          0x05ac  (Apple Computer, Inc.)
    HL-1270N series:
      Version:          1.00
      Bus Power (mA):          100
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Brother
      Product ID:          0x0008
      Serial Number:          L9J286292
      Vendor ID:          0x04f9
    Basic Optical Mouse:
      Version:          0.00
      Bus Power (mA):          100
      Speed:          Up to 1.5 Mb/sec
      Manufacturer:          Microsoft
      Product ID:          0x0084
      Vendor ID:          0x045e
    Apple Pro Keyboard:
      Version:          1.22
      Bus Power (mA):          250
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Mitsumi Electric
      Product ID:          0x0204
      Vendor ID:          0x05ac  (Apple Computer, Inc.)
    SuperDisk USB 120MB drive:
      Version:          0.0e
      Bus Power (mA):          500
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Imation
      Product ID:          0x0002
      Vendor ID:          0x0718
    USB Bus:
      Host Controller Location:          Built In USB
      Host Controller Driver:          AppleUSBOHCI
      PCI Device ID:          0x0026
      PCI Revision ID:          0x0000
      PCI Vendor ID:          0x106b
      Bus Number:          0x19
    LaCie d2 DVDRW USB:
      Capacity:          451.76 MB
      Removable Media:          Yes
      Detachable Drive:          Yes
      BSD Name:          disk2
      Version:          0.00
      Bus Power (mA):          500
      Speed:          Up to 12 Mb/sec
      Manufacturer:          LaCie
      OS9 Drivers:          No
      Product ID:          0x1011
      Serial Number:          FFFFFFFFFFFF
      S.M.A.R.T. status:          Not Supported
      Vendor ID:          0x059f
    LaCie d2 DVDRW USB:
      Capacity:          451.76 MB
      Removable Media:          Yes
      Detachable Drive:          Yes
      BSD Name:          disk2
      Version:          0.00
      Bus Power (mA):          500
      Speed:          Up to 12 Mb/sec
      Manufacturer:          LaCie
      OS9 Drivers:          No
      Product ID:          0x1011
      Serial Number:          FFFFFFFFFFFF
      S.M.A.R.T. status:          Not Supported
      Vendor ID:          0x059f

  • HT204306 my kids enter wronge passwords several times until the ipad says"connect to iTune" but the ipad does not appear on the iTune.I know the correct password.

    my kids enter wronge passwords several times until the ipad says"connect to iTune" but the ipad does not appear on the iTune.I know the correct password.

    You've connected the iPad via cable to your computer, and your computer's iTunes is up-to-date ? If it's icon isn't showing then try one of these troubleshooting pages :
    PC : iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    Mac : If you don't see your connected device in iTunes for Mac - Apple Support
    If the iPad is disabled then you'll need to reset the iPad back to factory defaults, after which you can restore to your backup

  • Recently when I install apps, the icon does not appear on the menu screen, also, it shows that it is down loading at the app store and when complete, I can not open it or reinstall it.  Help Please   o,

    Recently when I install apps, the icon does not appear on the menu screen, also, it shows that it is downloading at the app store and when complete, I can not open it or reinstall it. Has happened on the last 4 free apps. Help Please

    Reset your iPad. Press and hold both the power and home buttons for 10-15 seconds till the Apple logo appears. Release both buttons. Wait 15-20 seconds till you iPad starts on it's own. Now try and download an app.

  • After installing an App, the icon does not appear on the desktop?

    After installing an App, the icon does not appear on the desktop? Where would I find it?

    Some people have found that an app (usually iBooks for some reason) hasn't appeared on a homescreen until after the iPad has been reset and has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    Also depending on what the app is have you got an age rating set in Settings > General > Restrictions that is hiding it ?

  • Ipod restore failed  can see on the screen is the cable connection symbom and the ipod does not appear in the LH panel of itunes is there an easy solution to this

    ipod restore failed  can see on the screen is the cable connection symbom and the ipod does not appear in the LH panel of itunes is there an easy solution to this

    To get iTunes to see your iPod try:
    - Placing the iPod in recovery mode.  See:
    iPhone and iPod touch: Unable to update or restore
    - Placing it in recovery DFU mode:
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Sometimes this program will get th iPod in recovery mode:
    RecBoot iPod-1.0.2-Mac-Jaxov.zip - File Shared from Box.net - Free Online File Storage

  • When trying to backup and sync my ipad and iphone with itunes the device does not appear int he upper right hand corner anymore

    when trying to backup and sync my ipad and iphone to itunes it does not appear in the upper right hand corner under devices for me to click on

    In that same window - the one where you see your backups - click on the box at the bottom that say -Prevent iPods, iPhones and iPads form syncing automatically. Then click OK and quit iTunes.
    Connect your iPad to the computer and launch iTunes. Right click on the iPad name on the left side under the devices heading and select - Restore from backup. A window will pop up from which you can select any of the backups that you have for the iPad. Select the backup that you want to restore from and then go agreed and restore the iPad. Sync with iTunes when you are done.
    Remember that when you restore from a backup - you restore everything in that backup to the iPad. You cannot selectively restore content. It is all or none.

  • I have iTunes ver 10 on a PC with Playlists which do not sync to ITouch or Nano (6th Gen). All the music does not appear and the playlists do not appear at all. I have selected to manually manage music on the sum tab

    I have iTunes ver 10 on a PC with Playlists which do not sync to an Itouch or Nano (6th Gen). Also, all the music does not appear when I check entire library and there is enough memory on the device. When I select to manually manage music on the summary tab and selected playlists on the music tab nothing changes. Either way all the music isn't on either device and the playlists are not on either device. Please advise next steps. Thank you.

    Connect the device to the computer.
    In iTunes, select the content desired to sync.
    Sync.
    This is all described in the User's Guide, reading it may be a good place to start.

  • After installing FF 6.02 on Windows 7, the icon does not appear on the desktop and the program does not appear in the All Programs menu

    I just received a new laptop running windows 7 home premium and wanted to install Firefox on it. I tried to install the most recent version. When i installed 6.0.2, the icon did not appear on my desktop (it was a hidden file in my desktop folder) and the program group does not appear in the start menu's All Programs list. The program *does* run though, at least it did a few times. This happened whether i installed as administrator or not. Installing firefox 3.6.22, though, DID create the program group and desktop icon, and upgrading from there removed them again. installing other programs (e.g. vlc, trillian, etc.) did not cause this behavior. I also tried this both with and without McAfee's realtime protection running.

    Some people have found that an app (usually iBooks for some reason) hasn't appeared on a homescreen until after the iPad has been reset and has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    Also depending on what the app is have you got an age rating set in Settings > General > Restrictions that is hiding it ?

  • The firmware was upgraded on my ipod touch 4g and now the artwork does not appear for the various albums. What to do about this?

    After the firmware was upgraded the artwork does not appear on my ipod? How do I fix this?

    Try looking at the previous discussions with your same problem.  Like the ones on the right-hand side of this page under the heading "More Like This".

  • I've plugged in my Ipod shuffle and the device does not appear in Itunes.  How can I see or update the music on it?

    I've plugged my Shuffle into my MacBook Pro and Itunes did not pop up.  I opened Itunesmyself, yet the device was not showing and I had no 'device' tab in the top right corner next to 'Itunes store' tab.  Therefore how can I update the musci on this shuffle or see what the problem is?  Thanks

    Hi Swill79,
    Thanks for visiting Apple Support Communities.
    You may find the tips in this article helpful for troubleshooting your iPod connection:
    iPod not recognized in iTunes and Mac desktop
    http://support.apple.com/kb/ts1410
    Best,
    Jeremy

  • In contacts the country field of the address does not appear in the print pre view or or in the printed label. any suggestions  why or who to correct ?

    In contacts on my new i Mac the country field does not show in the label print pre view or the printed label.
    Any suggestion of why this is happening?

    I have found a solution - no bug. See this link
    Address book

  • Progress bar in the portal does not appear all the time when loading

    Hello All,
    I have a dashboard in EP, when I click on it the majority of the time a progress bar appears when it is loading.  Some time it does not, the page just appears to be doing nothing, then the dashboard will appear.
    Any one else seen this issue?
    Thanks

    Hai check whether your using the latest EP patch levels that may solve your issue.
    GoodDay.

Maybe you are looking for

  • Default NSDP problem...

    Hi guys, during the learing process of mapviwer I've encountered another problem, this time with the default NSDP ...I'm receiving an error: "Cannot find NS data provider for the default NSDP.." My html source: <script language="Javascript" src="/map

  • Implementation of Hash Bucket

    Hi, I'm working on a 10.2.0.2 RAC database and have heard of hash bucket implementation to get better performance of the database. Can you give some knowledge on that? And also, the process of implemetation of hash bucket.. Thanks in advance.. Rgds,

  • Which version of Microsoft SQL Server 2012 OLE DB Provider for DB2 needed?

    Hello, first time posting..... I am developing an SSIS package that needs to connect to DB2 tables. My environment does not have the necessary providers installed (SQL Server 2012 OLE DB Provider for DB2). I am running SSIS on a Windows Server 2012 R

  • CRM 2007 - Internet Sales

    Hi Gurus For those of you who have completed a CRM 2007 implementation of Internet Sales on a Standalone System... What Best Practice Guides did you refer to for this? And any other documents if any? Maximum Points for a speedy and accurate reply. Pl

  • Mpeg2 streamclip conversion for FCE

    I'm converting mpeg2 files using streamclip (from a sony DVD camera, mini dvds, 16x9), whats the best format to convert to keeping the best quality for FCE