The device does not have the necessary services.

I just purchased a waterproof bluetooth shower speaker. My Macbook Air is showing the device, which I wanted to put songs on, so I groove in the shower But when I click any song file or the Music folder, the message says the device does not have the necessary services.
Any help is appreciated.

That is correct.
This is not and has never been a feature of iphone.
IPhone support bluetooth for handsfree telephone devices/headsets, stereo speakers/headsets, some peer-to-peer apps, some keyboards, and tethering where provided by the carrier.
Other than this it will not connect to any other computer/phone/device.
File transfer is not supported.

Similar Messages

Bluetooth: Device Does Not Have The Necessary Services

I have a new iMac and MacBook both with OS X 10.5.1. I paired both via Bluetooth and they both see each other. However when I try to "Send File" or "Browse Device" with either machine, I get an error that says "The device does not have the necessary services".
Very frustrating!

Same trouble on Mac 10.5.1 + smartphone HTC s710 (windows mobile 6). The thing is that it worked 15 days ago! (before a relaunch of the device). What does Apple ?

HT3042 when i try to send songs to my ipad it says 'this device does not have the necessary services' what can i do about this?

when i try to send songs to my ipad it says 'this device does not have the necessary services' what can i do about this?

call monster, the manfacturer of beats and ask them: http://beatsbydre.com/support/international-support-contact-numbers,default,pg.h tml

I am trying to pair my new mouse to my mac i get the message this device does not have the necessary

i am trying to pair my new magic mouse to my macbook pro and i get the message "this device does not have the necessary services".

Hi Barry
Thanks for the advice.
I have solved the problem by senting up a new bluetooth device.
Should have read the directions.
Many thanks
John

HT3529 I'm having trouble with my iPhone 5 iMessage service. The device does not recognize the users who have iMessage when I try to contact them using this feature. Who have the same issue and what did you do in order to solve it?

I'm having trouble with my iPhone 5 iMessage service. The device does not recognize the users who have iMessage when I try to contact them using this feature. Who have the same issue and what did you do in order to solve it?

Read here:
http://support.apple.com/kb/ts2755

Please help. just got my jabra halo, worked fine with my iphone4 but can't use it on my macbook pro. it always prompts " the devise does not have the necessary service

please help. just got my jabra halo, worked fine with my iphone4 but can't use it on my macbook pro. it always prompts " the devise does not have the necessary service

Found these instructions here:
https://discussions.apple.com/message/15388885#15388885
I found an answer that worked for me. I am using an iMac.
(1) Sign out of the iTunes store
(2) Open a NEW account with a new Apple ID
(3) Go through the sign up process and then go to the ACCOUNT INFORMATION page
(4) Go to RECOMENDATIONS & PING POSTING
(5) Turn on Genius there
Once the Genius updates, you can sign out and then sign in under your original Apple ID or the e-mail address you use for the iTunes store. All my store credit was there and now Genius worked.
Rather odd but I actually like the Genius at times except when it can't deal with some of my lesser known bands that I listen to.
Worked for me.

Facetime and iMessage issue in MacBookPro: Registering device does not have the appropriate credentials

When I try to log into Facetime or IMessage, system have returned the following error:
Registering device does not have the appropriate credentials
Two days ago Facetime was working correct I did not change my Apple ID or my password since them. Operating system is Mountain Lion update running on my MacBook Pro.
I do not know if could be a reason for this issue or not but I have updated recently my iPhone and my iPad to iOS 7. But Facetime between these device are working properly, the problem is with the MacBook Pro.
Please, any help to solve this problem will be apreciated.

I do have the same thing going on with my MacBook! it's annoying!

How do I send files from my IMAC via bluetooth to my ne Ipad. They will not "pair" but they are connected and discoverable. I send a file from Imac snow leopard OS X 10.6 to the ipad but the failure message says the ipad does not have the ncessary servr

How do I send files from my IMAC via bluetooth to my new Ipad? They will not "pair" but they are connected and discoverable. I send a file from Imac snow leopard OS X 10.6 to the ipadusing bluetooth, but the failure message says the ipad does not have the necessary services. What are these? Do I neeed to have iphoto and ms word to send pix and .doc files?

File Sharing over Bluetooth is not a feature of iOS devices. iOS does not include the required Bluetooth profiles to allow this. You cannot add this feature, so you may as well stop trying.

Hyper-V cannot be installed: The processor does not have the required virtualization capabilities.

I am trying to use Visual Studio 2013 with Windows Phone SDK 8.0 on Windows 8.1 Enterprise running as a guest in a VirtualBox virtual machine hosted from Windows 7 Ultimate. The Windows Phone emulator in Visual Studio will not work. The
guest Hardware Virtualization settings for VT-x and Nested Paging are selected. The BIOS setting for Virtualization is enabled. However, in the guest Windows 8.1 features settings, the "Hyper-V Platform" option is disabled and indicates
that the "Hyper-V cannot be installed: The processor does not have the required virtualization capabilities." However, I checked on my processor which is an Intel (Clarksfield), I7-740QM 1.73 and it supports Hyper-V,
SLAT/EPT. My BIOS has only a single option for enabling Virtualization but none of the other SLAT/EPT, VMX, XD options. I am lost here. Is there a solution? Do I need to use Visual Studio 2013 and Windows Phone SDK 8.0 directly
on a Windows 8.1 host and not through a virtual machine?

You can't run Hyper-V inside a VirtualBox VM (nested virtualization). It doesn't pass through the necessary CPU requirements.
The only virtualization solution that allows for nested VMs is VMware's Workstation and vSphere Hypervisor (ESXi). VMware Player is their free product, you may be able to use it, I've not tried player, but have nested Hyper-V in both Workstation and ESXi.
Follow the instructions here for setting up VMware Player, you need to set the VM settings and .vmx file for it to work.
http://www.virtuallyghetto.com/2011/07/how-to-enable-support-for-nested-64bit.html
http://www.rickygao.com/enable-hyper-v-under-vmware-workstation-for-your-lab/

The device does not recognize the command

Hello,
I'm using this Microsoft Tool for the firsts time. I'm getting a "The Device does not recognize the command.". I have installed Microsoft Network Monitor 3.4 onto my Windows 7 Laptop. I was able to pull captures yesterday. But today I'm getting
this error. I don't believe anything's changed.
These are the steps I'm doing to produce the error. New Capture -> Capture Settings -> Wireless Network Connection ( Under Select Network Adapters to Capture).
With Wireless Network Connection highlighted I click properties -> Scanning options. Error pops up -" Device does not recognize the command".
I have tried uninstalling Microsoft Network Monitor, and re-installing it. I have tried uninstalling the Wi-Fi adapters and re-installing it. I have tried restarting. I'm at a lost right now. I'm trying to capture some day on the 5 GHz band, and this is
the only computer I have that can see it.
Thank You

Sorry for the delayed response. I can't say I know how to troubleshoot this issue. My guess is that the network driver must have changed, as there's a strong dependency on the manufacture to support this mode. If you do still have the problem,
perhaps see if it was updated was applied?
Paul

I was wondering why the iPhone 5 has the option for a battery percentage and the iPod touch 5g doesn't? I mean... they are almost both the same thing... just the iPod does not have the phone.

I was wondering why the iPhone 5 has the option for a battery percentage and the iPod touch 5g doesn't? I mean... they are almost both the same thing... just the iPod does not have the phone.

One likely reason is the % battery is not that accurate because of the smaller battery capacity in the iPod compared to iPhone and iPad. Users why use a % battery app post that the % reading changes a lot.

After downloading the ios7 to my iPhone 4s, the keyboard does not have the microphone so I can't speak to text. How do I get this feature back?

After downloading the ios7 to my iPhone 4s, the keyboard does not have the microphone so I can't speak to text. How do I get this feature back?

Go to Settings > General > Siri and turn Siri on. Once you turn it on, you will have the microphone key back on the keyboard

Solaris: The System does not have the required swap space

I'm trying to install Oracle onto Solaris 9. The installation check fails with the error
The System does not have the required swap space.
I've read the install Guide I get the following when I do the memory checks
bash-2.05# /usr/sbin/prtconf | grep "Memory size"
Memory size: 1024 Megabytes
bash-2.05# /usr/sbin/swap -s
total: 767688k bytes allocated + 117080k reserved = 884768k used, 379040k available
The install guide doesn't say how to increase the Swap Space. I would like to increase the Swap Space just for the duration of the installation. From the install guide I'll need a Swap Space of 1.5 times the Ram on the machine so I'll need 1.5GB Swap Space. Can someone help me out with the required syntax to increase the Swap File Size?

Found something on the web that did the trick. Create a few files and then add to your swap.. In case it's of interest to anyone else here's what I had to do
swap -l (lists files in swap)
mkdir /tmp/swap/ (create dir for file to add to swap)
mkfile tmp/swap/swap11 (create file for swap)
swap -a tmp/swap/swap11 (add file to swap)
swap -l (check files in swap)

Export failing with "The user does not have the required rights to perfrom

We are testing an upgrade to BOXI 3.1. We use the CrystalReportViewer .net web control to view the report. When the export button is clicked and the Crystal Reports file format is selected, the following error message is displayed:
"The user does not have the required rights to perfrom this operation. Please contact your administrator. "
Notice that perfrom is not spelled correctly. This is what actually gets displayed.
I'm not too concerned about the spelling, but I do want to fix the error. So I checked the security on the folder and the user does have full control. Both advanced security options are selected:
-View document instances that the user owns
-Export the report's data
So what else could be causing this?

I had applied the full control access to the wrong group. Once I applied that access to the user that actually generates the report, it worked.

The illustration does not have the correct number of operands...

I work on a Macbook Pro 10.8.5. When I open a file in AI CC and place any number of images, save and close the file. When I reopen the file I get this message. 'Can't open the illustration. The illustration does not have the correct number of operands for an operator... etc.' The file scan still open after this but all the placed images disappear.
I've tested placing different formats ie. JPGs, TIFs, PNGs, flattened PSDs etc. They all come up with the same error.
I've searched in Google and I haven't found a solution yet. There was a suggestion to import the AI file in INDD, this doesn't help beause all copy converts to outlines and embeds the images.
Can anyone help?

Hi, just tried this and AI says 'Could not open the file'. Here's a couple of screen grabs to show you my file setup and the exact error message.

The device does not have the necessary services.

Similar Messages

Maybe you are looking for