The device was suddenly stopped working

The device was working perfectly for 4 days ( it's new )
But he suddenly stopped working and I could not turn it on
I did not know the reason?? Please help me

The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup...  Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

Similar Messages

  • My charger doesn't want to plug in to the phone,it suddenly stopped working.What should I do?, My charger doesn't want to plug in to the phone,it suddenly stopped working.What should I do?

    My charger doesn't want to plug in to the phone,it suddenly stopped working.What should I do?, My charger doesn't want to plug in to the phone,it suddenly stopped working.What should I do? iPhone 5

    Clean the lint/debris from the charging port and plug the cable in.

  • The ethernet ports suddenly stopped working on airport extreme wondering why and how to fix the problem

    I use the ethernet cable to connect my airport extreme to a linksys router to extend the network but suddenly all the ethernet cables on airport extreme stopped working and now the linksys won't get a connection. I was wondering why this might of happened and if there is a solution to fix the problem. Also i wondering if i should get rid of the linksys and get and airport express to just extend the network.

    The Extreme to Express without the Linksys router is the most compatible way to go but I would first check out the Extreme by itself and make sure everything is working properly

  • The adjustment brush suddenly stopped working in Lr CC (among other things)

    1. All of a sudden the adjustment brush stopped working in my Lr CC. The little buttons that you can click on to activate your adjustments are gone and when I open files where I have done adjustments they are still there but no "buttons" to click and consequently I can not make any changes or new adjustments. For example; in the image I have inserted I have made adjustments with a) Sharpness, b) Skin Softening and c) Iris Enhance and the adjustments are still there but no "buttons" any more and therefore I can´t change anything. I edited this image April 29 and 30 when Lr still worked fine. Today (and yesterday) things has really start spooking around with Lr.
    2. After having saved an image in Ps CC as a psd-file going back to Lr CC for cropping Lr continuously reloads and resets all edits that I have done or are trying to do.
    Everything has been working earlier but the past two days things like the above has stopped working.

    Well, all problems regarding this are solved after having talked to Adobe's support. After having backed up my lrcat we deleted the Lightroom 6 plist, emptied the trash can and then restored Lightroom to its default values during the start-up process.

  • Why do the screen controls suddenly stop working?

    All of a sudden, my Acrobat X Standard software stopped allowing me to combine PDFs. The front window still opens when I double click the Acrobat icon,. but  all the interactive choices are dead. I can still use the menus. But once I load files to combine, none of the controls work. And yes, I uninstalled and reinstalled the entire software package. Any help?

    All of a sudden, my Acrobat X Standard software stopped allowing me to combine PDFs. The front window still opens when I double click the Acrobat icon,. but  all the interactive choices are dead. I can still use the menus. But once I load files to combine, none of the controls work. And yes, I uninstalled and reinstalled the entire software package. Any help?

  • HT1665 I'm using my iPhone 4s headphones for my iPhone 4s but the controls on the headphones have suddenly stopped working.

    They were working an hour of so ago when I last used them but they're currently not doing anything. I've cleaned/looked for lint but there was none.
    Should I take this to the local Phone place where they sell iPhones? I love iPhone/any Apple product headphones because they're far superior to any other brand I've brough (They last a little longer.)
    -Emily.

    Hi there alokdelta78,
    You may find the troubleshooting steps in the article below helpful.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    -Griff W. 

  • The screenshot function suddenly stopped working on my Iphone 5

    A few days ago, I tried to take a screenshot on my Iphone 5. It did not work. What I mean by it not working is that it did nothing when I pressed Power + Home buttons simultaneously. I tried resetting the phone multiple times (Holding down power+Home) but it still didnt fix it. I have yet to Restore my phone from backup. That is my next step but I wanted to check here to see if anyone else is having the same problem or knew a solution before I try the Restore. Anyone have any suggestions? Thanks any help is appreciated.
    T

    Restore iPhone with iTunes on your computer. See if this helps. If still problem, make genius reservation or set up service and take or send iPhone to Apple for Warranty evaluation.

  • [SOLVED] Thinkpad Fn keys suddenly stopped working

    I'm on ThinkPad Edge 14. For some reason(s) unknown, my Fn keys stopped working after I restarted Arch a few hours ago.
    I've checked the BIOS, everything is fine (no settings unchanged). I tried checking if X (I'm on Gnome 3) can still detect the keys using xev (as outlined here: https://wiki.archlinux.org/index.php/Ex … oard_Keys) and the Fn key is detected as "XF86WakeUp" witht the keycode "151", so at least nothing is wrong with the actual physical button.
    What's more weird is that, I tried booting from another Hard Drive into Ubuntu, and the Fn key also didn't work (it has worked fine previously). What could be causing this?
    EDIT: Even weirder, Fn keys aren't working in Windows as well (I dual boot). BIOS's still unchanged, and this started happening when I was working with Arch, so I'm quite sure this can be fixed through Arch. Problem is, I don't know where to start. How can Arch affect Ubuntu & Windows when I didn't change BIOS?
    Last edited by splatterdash (2011-08-28 22:32:23)

    I found out the problem!
    I tried checking the Lenovo forums about the problem and found this: http://forums.lenovo.com/t5/ThinkPad-Ed … d-p/323077
    Apparently, it's possible that the Fn keys suddenly stopped working for no clear reason. In my case, it happened when I was on Arch, so I thought the problem was with Arch. Anyway, I updated the BIOS from Lenovo's site and everything's working fine now.
    Thanks!

  • GPRS services suddenly stop working after some time abt 4 hrs.Airplane on off solves it

    I am using a factory unlocked iPhone 4 GSM in India. Iam currently using it on airtel network 2G services i.e GPRS services. Now the problem I have noticed is that the GPRS services suddenly stop working after some time say about 4 hours. Then what i do is to turn airplane mode on and then off or restart the phone and GPRS starts working. Agan after some time I have to repeat this exercise. Please help soon. This is happening since the time i bought this phone i.e from past 20 days. I have tried allpossible network settings and resetting network but nothing helped. everything else is working perfect.

    Hi Syed,
    I have also started facing the exact same problem since the past few months with my docomo service.
    Earlier, EDGE / GPRS used to work just fine from my workplace where the network was good.
    But recently, I got my iphone replaced, due to a network problem, from an apple store in indianapolis, and also upgraded to ios 5.....so not sure now whether this intermittent EDGE / GPRS outage is due to the new hardware or the new OS.
    Did you upgrade to iOS 5 and did it help?
    PS: iOS 5.0.1 also doesn't seem to be helping, I still need to restart the phone to get EDGE / GPRSt to work.....will try out the airplane mode thing....at least that shouldn't take as much time as a full reboot.
    Regards,
    Hemant

  • Wireless keyboard suddenly stopped working - changed batteries still did not help

    Hi
    I have an Envy 20 all in one touchscreen with a wireless keyboard which has been absolutley fantastic until now.  The wireless keyboard suddenly stopped working while composing an email.  I replaced the batteries and checked them with a volt meter to ensure 1.5v. They are a name brand alkiline battery.  I tried re-booting the computer and pressing the blue connect button under the keyboard.  The only keys that seem to work are the volume up/down and mute; the rest of teh keyboard does not.  Any idea?  I like the factory keyboard so I am hoping it is not a faulty keyboard.  After market keyboards will use a USB port.
    Thanks
    Thor
    This question was solved.
    View Solution.

    Hello @Thor66,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that your wireless keyboard is not working and you are looking for assistance. I am providing you with an HP Support document: Wireless Keyboard and Mouse Troubleshooting, which will walk you through the troubleshooting process for your wireless keyboard.
    Now if this does not work and you have to replace the keyboard do not fear you can replace the keyboard and the dongle without using another USB port as the one that is in can be replaced. I would be happy to assist you further and/or walk you through changing out the dongle from a new wireless keyboard, but first I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
    How Do I Find My Model Number or Product Number?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Bluetooth suddenly stops working?

    Has anyone had the issue where the factory Bluetooth suddenly stops working on the PowerMac G5?
    My G5 (Dual 2 gig) has been working like a champ, and suddenly during use or when it is attempting to sleep, will seem to "lose" the computer. The computer in System Preferences can still see the bluetooth power levels, they appear to be paired, but moving the mouse and/or keyboard does nothing.
    A reboot seems to be the only thing that clears it. The only recent addition was a wired USB camera cradle, and the problem did seem to start around then, but I don't know why that would impact Bluetooth. Any ideas?

    The problem turned out to be a combination of RF and a hardware problem.

  • My startup chime suddenly stopped working.

    I have 2011 27 inch iMac. (Mavericks 10.9.4) The startup chime suddenly stopped working this morning. I have not changed any software or hardware recently and there is nothing plugged into the headphone jack. Tried resetting SMC and PRAM and still no chime. Machine appears to be working normally other than this. Any idea what could be going on? Thanks, John.

    Might be worth doing SMC and PRAM resets - there are instructions linked in one of the posts in this discussion: https://discussions.apple.com/thread/3695933?tstart=0
    ~Lyssa

  • My MacBook Pro will not connect to my home wifi but will connect everywhere else. My other Apple devices (I-pad, I-touch, another MacBook Pro) connect to the router without problems. It was working fine but all of a sudden stopped working.Thanks!

    My MacBook Pro will not connect to my home wifi but will connect everywhere else. My other Apple devices (I-pad, I-touch, another MacBook Pro) connect to the router without problems. It was working fine but all of a sudden stopped working.Thanks!

    try this.
    get back into your router's settings and start deleting devices that are not connected to your router.
    you can also delete the ones that are connected - they'll connect again.
    on the DHCP side of it, increase the amount of users that can connect/log in to your router.
    see if that sorts it out for you.
    good luck.

  • HT201263 My iPod touch suddenly stopped working. It was fine, but when I went back the screen had gone black and I was unable to turn it on. It is now unresponsive and my computer does not recognize it when it is plugged in. What should I do?

    My iPod touch suddenly stopped working. It was fine earlier, but when I went back a few hours later, the screen had gone black and I was unable to turn it on. It is now unresponsive and my computer does not recognize it when it is plugged in. I thought it just needed to be charged but there seems to be a larger issue now. What should I do?

    Let your ipod die. Then when it is dead charge it adn turn it back on. After that it should be fine.

  • My iPad3 has suddenly stopped working, it won't charge up and the screen is blank I have tried to reboot the device by holding the top and home buttons but I don't even get the Apple logo. any advice?

    My iPad3 has suddenly stopped working, it won't charge up and the screen is blank I have tried to reboot the device by holding the top and home buttons but I don't even get the Apple logo. any advice?

    Plug it into the charger/wall socket and let it charge for at least an hour. It just might start charging. If you have already tried charging it for a fair amount of time and it didn't work, try restoring the device with iTunes.
    iOS: Not responding or does not turn on - Apple Support

Maybe you are looking for