The dialogs doesn't show up over HTTPS connection.

JWS usually shows Version check and Launching dialog when it start up.
But when it started over HTTPS connection, those dialogs doesn't show up.
When we use HTTP connection, the application launch by following step.
1. Java loading dialog shows
2. Version check dialog shows
3. Launching application dialog shows
4. Application launched
However, in the case of HTTPS connection, step2, 3's dialog doesn't show up.
(It might be skipped? What's going on?)
I think that the step1,2,3 are processed by JavaWebStart.
Is there any way to show these dialogs when we use HTTPS connection?
Client: Windows XP(SP2), JDK: 1.4.2_06
Web Server: WebLogic(ver.8.1)

When running over http or file protocol, these dialogs are shown if the update check takes more than 1500 ms, when application must be updated before launching (due in 1.5.0 to offline-allowed not being specified, or setting <update check="always" /> in 6.0) (assuming target isn't using basic authentication). If the update check can complete in less time than that, then the dialogs will not be shown.
For https, there is a probability that the attempted https connection will cause https security dialogs, which would then always cause the check to take more than 1500 seconds (or whatever timeout is configured) so webstart won't show the download progress dialog untill it knows there is an update.
This should be a bug, since it is handled beter in BasicAuthentication case.
If you are using Authentication, the download dialog will show up only after 1500 ms if the JAuthenticator chalange dialog is not being shown.
Similarilly, using https, he dialog should show after 1500 ms (or whatever timeout) if the https security dialog, or host mismatch dialog is not showmin.
/Andy

Similar Messages

  • Region Popup Dialog doesn't show up in Detach mode

    issue description:
    1.     There is a task-flow: filter-task-flow.xml, there is method call as default activity and always route to next one view activity filter , refer to below filter.jsf code
    <af:panelGroupLayout id="pgl1" layout="vertical">
    <af:popup childCreation="deferred" autoCancel="disabled" id="filterpopup" binding="#{backingBeanScope.filterBean.p1}" contentDelivery="lazy">
    <af:dialog id="d2" ……/>
    </af:popup>
    </af:panelGroupLayout>
    2.     In my report.jsff page, there is a command button and a region with filter-task-flow.xml , refer to below
    <fnd:applicationsTreeTable featuresOff="wrap " actionsMenuRendered="false" primaryToolbarRendered="true" secondaryToolbarRendered="true" >
    <f:facet name="treeTable">
    <af:treeTable …..>
    </af:treeTable>
    </f:facet>
    <f:facet name="appsTreeTableSecondaryToolbar">
    <af:toolbar id="t1">
    <af:commandToolbarButton id="filter2" text="Filter" rendered="true" >
    <af:showPopupBehavior triggerType="click" popupId=":::fr1:filterpopup"/>
    </af:commandToolbarButton>
              </af:toolbar>
    </ fnd:applicationsTreeTable>
    <af:region value="#{bindings.filtertaskflow1.regionModel}" id="fr1"/>
    3.     In page definition reportPageDef.xml for report.jsff page, there is below definition.
    <taskFlow id="filtertaskflow1"
    taskFlowId="/WEB-INF/…../filter/flow/filter-task-flow.xml#filter-task-flow"
    xmlns="http://xmlns.oracle.com/adf/controller/binding"
    activation="deferred">
    <parameters>
    <parameter id="selectedSubTab" value="#{backingBeanScope.apprAppraisalPMOCRBean.selectedSubTabKey}"/>
    <parameter id="planId" value="#{backingBeanScope.apprAppraisalPMOCRBean.planId}"/>
    <parameter id="mgrEventId" value="#{backingBeanScope.apprAppraisalPMOCRBean.mgrEventId}"/>
    </parameters>
    </taskFlow>
    4.     Now if I go to this page(report.jsff) and click command tool bar button Filter , popup dialog works. And enter Detach mode, click Filter again, popup dialog works.
    5.     But if I go the this page(report.jsff) and enter Detach mode before clicking Filter button, then try to click Filter button, popup dialog doesn’t show up without any issue/error in UI & console. Then I exit Detach mode, and click Filter button again, It will still not popup any more until you reopen the page and click Filter button firstly.
    Appreciate for any suggestion. Thanks a lot.

    resolved. just need move dialog from region to report.jsff page and keep table content in region. that's all

  • I have updated to the latest version of iTunes (11.2.2.3). However, when I connect my iPod it shows in My Computer and iTunes opens automatically when the iPod is connected but the device doesn't show in iTunes.  Any ideas?

    I have updated to the latest version of iTunes (11.2.2.3). However, when I connect my iPod it shows in My Computer and iTunes opens automatically when the iPod is connected but the device doesn't show in iTunes.  Any ideas?  I am on Windows 8.1 and my iPod is a Classic

    Hi murr18140,
    Welcome to the Support Communities!  The article below will help you troubleshoot the issue you are having with your iPod classic not being recognized in iTunes for Windows:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/TS1363?viewlocale=en_US
    I hope this information helps ....
    - Judy

  • When I rip a cd, then use another program, then come back to itunes, the cd stops ripping and the cd doesn't show up in the side bar anymore. What's going on here?

    When I rip a cd in itunes, then go to use another program, then come back to itunes, the cd stops ripping and the cd doesn't show up in the side bar anymore. What's going on here?  I am running the x64 version of itunes in Windows 7.

    Just wanted to say that you're not the only one with the problem: http://discussions.apple.com/thread.jspa?messageID=13009436

  • Whats the difference between 2 way SSL over HTTPS & 2 way SSL over TCP

    also, is there an implementation on web for 2 way SSL/TCP .
    PS: plz donot give me the definition for 2 way SSL :)

    whats the difference between 2 way SSL over HTTPS & 2 way SSL over TCP?The difference is that '2 way SSL over HTTPS' doesn't exist.
    HTTPS is HTTP over SSL, so SSL over that would be SSL over SSL which would be pointless.

  • I can't open my iPod library in iTunes, the app doesn't show the device at all, no error message, nothing, but windows 8 opens it like it would a flash drive. It has worked for me before just fine and both have the most updated software versions.

    I can't open my iPod library in iTunes, the app doesn't show the device at all, no error message, nothing, but windows 8 opens it like it would a flash drive. It has worked for me before just fine and both have the most updated software versions. HELP PLEASE!

    yeah i plugged in my iphone to my computer and itunes does not even notice that i plugged it in.

  • How can I import pictures from my iphone to PC which I imported to the iphone from another PC? The folder doesn't show on my computer. I see all other pictures I took with the phone but not the imported folder.

    How can I import pictures from my iphone to PC which I imported to the iphone from another PC? The folder doesn't show on my computer. I see all other pictures I took with the phone but not the imported folder.

    Photos that were synced from a computer won't show for copying to a computer. If you want to copy them back then you will need a third-party app on your phone such as Simple Transfer which can copy them off via your wifi network. But photos are 'optimised' when they are synced to a device, any that you then copy back to a computer may not be exactly the same as they originally were on your computer (e.g. their dimensions might be different and their colours may look a bit different).

  • When i add a new contact to my phone, their details are saved in my contact list, but the name doesn't show up when they ring or txt me, how can i change that?

    when i add a new contact to my phone, their details are saved in my contact list, but the name doesn't show up when they ring or txt me, how can i change that?

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    Finally, if the Restore doesn't work, let the battery drain completely.  Then recharge for at least an hour and Restore again.

  • When i click on a photo to edit, the photo doesn't show up and the area where the photo should show up is black.  Why?

    When i click on a photo to edit, the photo doesn't show up and the area where the photo should show up is black.  Why?  I can edit some photos, whereas others I can not.

    There are several possible causes for the Black Screen issue
    1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
    2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
    3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
    4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
    5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    If none of these help:
    As a Test:
    Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • WiFi ON/OFF button Doen't Work, the IPod doesn't show the on/off button in the Settings- General - WiFi

    After My IPod Touch 4th Geneartion was broken I had to fix the screen, which cost me a lot, after a perfect restore through the ITunes I went to connect to my IPod to the WiFi network then the WiFi ON/OFF button Doen't Work, the IPod doesn't show the on/off button in the Settings-> General -> WiFi.
    And another problem I encountered during this operation was that the Games I downloaded through the ITunes doesn't work, when I click on the icon ( Game Icon) it starts an then closes in a few seconds

    See:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    Apple wil not help since yo took the iPod apart
    Try taking  it apart and look for a disconnected antenna.
    Installing iPod Touch 4th Generation Wi-Fi Antenna - iFixit

  • I have connected a new (set up for mac) seagate external HD and although file sharing is turned on the HD doesn't show up on any of the other computers on our network??????  Please help!!!!!

    I have connected a new (set up for mac) seagate external HD and although file sharing is turned on the HD doesn't show up on any of the other computers on our network??????  Please help!!!!!

    If the HD is setup for Mac and plugged into the AE.. with file sharing on, it should work.
    Try manually mounting the disk.
    In finder use go, connect to server, and type in AFP://AEName or AFP://AEIPaddress.. where you replace what I wrote with the actual name or actual IP.
    Later versions of Mac OS.. like ML for some strange reason have their preferences set by default to not show network drives.. change finder preference to see everything.

  • When I perform a split audio edit, the timeline doesn't show it when the clips are collapsed!

    Especially the clip whose audio is 'covering' another... the timeline doesn't show it's audio as extending, and it would appear only that the clip for which audio has been shortened, is still there, or at "0"... what gives? If you uncollapse the audio, or detach it, you do, once again, see the split audio.
    Thanks

    libovh wrote:
    Especially the clip whose audio is 'covering' another... the timeline doesn't show it's audio as extending, and it would appear only that the clip for which audio has been shortened, is still there, or at "0"... what gives? If you uncollapse the audio, or detach it, you do, once again, see the split audio.
    Thanks
    Like Zambonisurfer suggested, this is so by design.

  • I have an ipod nano 5th generation. the problem with it's that it doesn't show in itunes when connected to the laptop and it switches on on its own and songs start playing the battery gets consumed too fast after full charge. what is the actual problem?

    i have an ipod nano 5th generation. the problem with it's that it doesn't show in itunes when connected to the laptop and it switches on on its own and songs start playing the battery gets consumed too fast after full charge. what is the actual problem?

    What have you tried so far in terms of troubleshooting this issue?  Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
    What happens if you try to reset the device with it still connected to the PC?
    How to reset iPod
    Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
    Have you carefully worked through each and every single suggestion in this Apple support document?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • I'm trying to set up time machine to back up on an external HD connected t my airport extreme, but the disk doesn't show as an option in the time machine selecting a disk, any suggestion anyone? My mac "sees" the airport extreme   ??

    I'm trying to set up time machine to back up on an external HD connected t my airport extreme, but the disk doesn't show as an option in the time machine selecting a disk, any suggestion anyone? My mac "sees" the airport extreme   ??

    The first important thing to consider here is that Apple does not support Time Machine backups to a drive at the USB port on the AirPort Extreme, so that may likely have something to do with your difficulties.
    If you want to continue to try this, the drive must be formatted in Mac OS Extended (Journaled) and you almost always have to use a powered USB hub with a drive at the port of the Extreme...even if the hard drive has its own power supply....because the port on the Extreme is under powered.
    Most users who try this unsupported method have corruption difficulties sooner or later, but we do hear from some users who seem to be able to make it work.
    The bottom line is that there is no support from Apple on this if you have difficulties, so you may want to consider a secondary backup plan for your important data.

  • HT201363 I don't remember my security question answers and when I press the send to the alternate email the email doesn't show up in the inbox or junk mail so I don't know I can reset my security questions

    I don't remember my security question answers and when I press the send to the alternate email the email doesn't show up in the inbox or junk mail so I don't know I can reset my security questions

    You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
    (98287)

Maybe you are looking for