The difference among business process depicted in the billing plan?

I dont know the difference following business process in billing plan.
business process 1. set down payments and resource-related billing document.
business process 2. down payments and set resource-related billing documnet.
I dont know how to create this two business process in billing plan. meanwhile, I dont understand clearly the word set
thank you
Edited by: Yongguo Li on Mar 2, 2008 6:59 AM

Hi,
Agency Business Process
http://help.sap.com/saphelp_crm60/helpdata/en/15/016c07ab304f8a9ffeb3081f2103da/frameset.htm
Kapil

Similar Messages

What is the difference between signal processing tooklit and the advanced signal processing tooklit

Hi
I am work on a project with Labview 7.1 now and want to calculate the FFT based on
the Welch method. In my full version Labview, there is a signal processing tooklit
I install it but did not found that welch.vi. Is it means that except for signal processing
tooklit, there is another advanced one and I should pay more money for it, Or,
Should I update my Labview version to 8.0 and the software will support the tooklit?
Thanks a lot!

Hi dec04009 ,
When you say "Signal Processing toolkit", do you mean the Signal Processing Palette, that is included in LabVIEW Full?
LabVIEW has signal processing VI's, those are supported in later versions, like 8.0 or 8.2. Since LabVIEW 8.0 there were added many new mathematical functions. Take a look at this:
http://zone.ni.com/devzone/conceptd.nsf/webmain/bf49f9b8951a89f3862571840057b2c7
The Advanced Signal Processing Toolkit, has advanced features, like wavelets analysis, JTFA
http://sine.ni.com/nips/cds/view/p/lang/es/nid/1395
I'm not familiar with the Welch Method, but I found this in the functions of the LabVIEW 8.2:
http://zone.ni.com/reference/en-XX/help/371361B-01/lvanls/welch/
Hope this help.
Tania Lozoya

Difference between Business Process and Workflow

Hi all,
What is the difference between Business Process and Workflow? i have googled it and I don't really understand that complicated definition? Is there any examples to illustrate the difference between the both?

Hi,
I will try to put here , my perspective of this. If somebody knows better, they can update further on this.
Business process is purely on the perspective of the users. It may or maynot have anything to do with the system. When a draw a business flow diagram, we dont take care of how each and every process is handled in the system. The best illustration is an example of authorisation.
Let me say that I create a Purchase requisition. Once it is released a PO will be created by procurement managerD
This is a business process. However if we look at the system perspective, it can be like this.
1. Create a PR.
2. Check the value of the PR
3. If value <$100,an email needs to be send to person A, if it is $100 to 300$, an email should be send to person B and if >$300, an email should be send to B and C.
4.Once it is released, an email shoudl be send to D for creating a PO on this PR.
Here not only the process, but also how the work is delegated across various entities of the process is mentioned.
There are softwards like VISIO which actually take care of the business process in the perspective of the entities involved in the process. A workflow is a moredetailed version of business process with the roles of entities clearly defined and hence configured well in the system.
The concept is workflow is mostly used in the processes of authorisations, business activity monitoring(BAM), etc.
Hope I make it little clear to you.
You can reward if my response is of some help to you

Difference between business process, sales process and order process

what is the difference between business process, sales process and order process?

Dear Gopala,
business process is a general definition of the process which you have:
for example, you get an order, you have no goods, but you can produce them, you start an assambly processing, the production order will be created, then the goods will be prepatred, then the delivery will be created, the goods issue booked then your customer gets thwe goods and send the delivery confirmation, you create an invoice etc.etc.
sales process is a part of a business process.
Sales process shows how you sell the goods, there are different sales document categories to do this: sales orders, contracts, scheduling agreements etc.
order process is only one of possibilities of the sales process.
Order process is used if you get really a one-time (or at lease not on a regular basis many times) the simple orders where your customer says what goods he would like to receive and when. Then you create a sales order (in dialog transaction VA01) and can create a delivery. There are different types of sales orders in the standard. The customizing of sales order types is available under the transaction VOV8.
I hope, this info help you a little bit further to understand SD design.
Kind regards,
Akmal Vakhidov
Development Support SD, SAP

What is the difference between Business System and Business Service?

Hi
Please tell me what is the difference between Business System and Business Service...? In real time at what situation we will use Business System and in what situations we will use Business Service..? Please help me
Best Regards
Ravi Shankar B

HI,
Business system:
If you want to address a particular business system as the sender or receiver of messages, choose this service type.
A business system is an actual application system in a system landscape. A business system (service) comprises information about the inbound and outbound interfaces and the software component versions of the business system.
You usually use business system services when configuring internal company processes.
Business Service:
If you want to address an abstract business entity as the sender or receiver of messages, choose this service type.
Using a business service, you can define the technical or business subunits of the companies involved and then assign them the relevant interfaces.
You usually use business services when configuring cross-company processes. In this case, you only make your interfaces known to the business partners involved and either do not make any details about your own system landscape available, or only specific details.
For example, you can define RosettaNet Partner Interface Processes (PIPs) as business services.
Regards,
Sudheer.

Want to know the difference among the sap standard schemas TM00/TM01/TM04

hi, experts
i have read the standard courses HR310 and HR311,but i am still confused about the difference among the three standard TM schemas TM00,TM01 and TM04.
i only learn from the book about it as follows:
TM00: Time evaluation with time events
TM01: Time evaluation for work schedule deviations
TM04: Time evaluation for times entered as hours.
i want to know the details about different forms of time data and different strategies in evaluating the time data in the three standard schemas.
thanks in advance

Hi,
TM01: read the actual data, Automatically calculate the overtime with the help of events.
TM04: Negative time evaluation, Get the data from the Work schedules
TM01: Positive/Negative time evaluation: Read the exception of workschedules, get the data from the time events form the 2011IT.
TM01:
Schema TM01 can be used for time evaluation if you only record
exceptions to the work schedule, and not all times that count as working
time (actual times).
You can use schema TM01 to import and process time data that has been
recorded online.
The schema forms time balances, time wage types, and time quotas, and is
processed using the time evaluation driver, RPTIME00.
The valuation basis for time evaluation forms a planned pair, which is
generated according to the planned specifications in the employee's
personal work schedule.
The planned pairs generally correspond to the time worked. Only
attendances from infotype 2002 and absences from infotype 2001 result in
a difference between planned and actual.
Schema TM01 automatically generates overtime for all attendance times
recorded over and above the planned specifications in the personal work
schedule. If overtime is recorded in infotype 2005, it can be approved
systematically taking account of overtime breaks.
TM00:
Schema TM00 processes time events that have been recorded at a time
recording terminal, or the time pairs formed from the time events in
pair formation. Attendances and absences are also imported.
Schema TM00 is based on positive recording of time data, that is,
recording all times that count as working time (actual times).
Schema TM00 only evaluates time data with clock times (or full-day
records). The main task of schema TM00 is to classify the actual times
by comparing them to the planned specifications in the daily work
schedule (start and end of planned working time, core times, breaks, and
so on).
TM04:
The time worked by the employee is recorded in the Attendances infotype
(2002), and not as clock-in and clock-out times. When processing
clock-in/out times, the emphasis is on the length of time between the
postings and not on the times at which the postings were made.
You can use schema TM04 to process attendances and absences that specify
a number of hours only, rather than concrete start and end times.
The times stipulated in the daily work schedule are not relevant. Only
specifications such as planned hours and minimum daily working time are
evaluated from the daily work schedule.
TM04 caters both for negative time recording (recording of exceptions to
the work schedule) and positive time recording (recording all
attendances or actual times).
If negative recording is used, the planned hours are generated on the
basis of the daily work schedule. Recorded absences and some attendance
times are deducted (see schema TP01.)
The "Time Management status" indicator in the Planned Working Time
infotype (0007) shows whether all actual times are recorded for an
employee, or only exceptions to the planned specifications.
Regards:
Devi.

What are the differences among the follow types of database links?

What are the differences among the follow types of database links?
public database link
fixed_user database link
connected-user database link
current-user database link

Did you search the documentation ?
http://download-uk.oracle.com/docs/cd/B10501_01/server.920/a96521/ds_concepts.htm#15997

What are the differences among xfa.resolveNode, xfa.resolveNodes, SOM

I wish know the differences among xfa.resolveNode, xfa.resolveNodes, Relative SOM and absolute SOM.
In which cases I have to use which one. Generally without xfa.resolveNode we can work with Relative SOM or absolute SOM.
Simple example we can get value by using "form1.page.TextField1.rawValue".
So what is the limitaion of those?

Hi,
here's a good article describing the difference of resolveNode and resolveNodes methods.
http://blogs.adobe.com/formfeed/2011/06/resolvenode-vs-resolvenodes.html

What's the difference among RFC archive, HTTP archive & logical repository?

When defining storage type on OAC0, we have above choices.
What are the differences among them?
Thanks!

HI, Ashely,
U need to do some settings in General data--> Define data carier type,
Partial Work Step Execution
You must only partially carry out this work step when you want to store the original application files that are accessed using the Knowledge Provider in a secure are . In this case you must only define the data carrier that can be used as a server or frontend computer.
Complete Work Step Execution
You must execute this step completely when you store original application files in a secure area using DMS and not using the Knowledge Provider
Note:
SAP recommend storage using only the Knowledge Provider. You decide whether original application files are stored via Knowledge Provider when defining the document type (indicator Storage using Knowledge Provider)
In this step, you define the following settings for data carriers:
1.Define data carrier type archive
             Define archives
2.Define data carrier type vault
            Define vaults
3. Define data carrier type server, frontend
    This activity is done independently of the storage system that is run.
    Define servers
here 3, i think u have to set Mount poit, which are represent third party server.
Benakaraja

Tables to Verify the Coverage Template, Business Process and Reaction Times

Hi,
I am working on Oracle Service Agreements 11.5.10.2 version. I am new to this Module.
Please let me know the appropriate Service Contract Table names where the
Coverage Template , Business Process , Reaction times , Billing Rates etc.... details would be stored, when they are defined/setup from the Oracle Apps UI (Coverage Template form).
Thanks for your help in advance.
Regards,
-Santosh

Hi Gustavo Bortoloti,
That's right, the SAP BPC version 5.x SP x not have the specific setting.
Thanks,
Wandi Sutandi

What's the difference among "global name", "db_name","instance_name"......?

Hi. Everyone.
I am really confused about the following.
What are the difference among
1. global_name
2. db_name
3. instance_name
4. domain_name
5. SID
6. service_name(tnsnames.ora)
Can anybody explain the difference among them clearly?
I read some documents, but I am really confused.
One more question!!
Can I set or change "global name" in initSID.ora file?(not global_names)
I used the following command on "open-mode", but it seems to be permenant.
After I re-started the databases, I found that global_name was changed.
-->alter database rename global_name to "global_name".
--> shutdown and restart
--> select * from global_name.
Thanks in advance.
Best Regards
Ho

This forums has a nice feature: search engine :)
check this link:
the difference in SID,INSTANCE_NAME,DB_NAME,GLOBAL_NAME
Best Regards
Krystian Zieja / mob

Can anyone tell the difference among the DB tables ?

the difference among PAnnnn,PBnnnn,PCLn
can anyone tell me ?
for example.
PA0002 and Pb0002, what the difference?
thanks a lot.

Hi,
PAnnnn is a database tables to store the data records of infotype nnnn for Personnel Administration.
PBnnnn is a database tables to store the data records of infotype nnnn for Recruitment.
The PCLn database tables are used to store data clusters (such as results from Time Management, Travel Management, and Payroll).
Just check these link:
<a href="http://help.sap.com/saphelp_46c/helpdata/en/4f/d52822575e11d189270000e8322f96/frameset.htm">Reporting in HR</a>
Regards,

Client wants some business process to avoid the material theft?

Hi all,
Client wants us to recommend some business process to avoid the material theft in their storage area. kindly suggest me some solution like gate entry or periodic physical inventory or weigh bridge connection with SAP while loading and unloading the material with reasons.
regards,
Sanjana

hi
for this you have to create Z program ,like for gate entry or weigh bridge
you should do the audit bills manually and physical inventory in sap
check out on net for GATE ENTRY or PHY INV

I have an issue installing photoshop CC trial, I currently have elements and wanted to see the differences before buying, when installing through the creative cloud app I get the error message Exit Code: 7 Please see specific errors below for troubleshoo

I have an issue installing photoshop CC trial, I currently have elements and wanted to see the differences before buying, when installing through the creative cloud app I get the error message Exit Code: 7 Please see specific errors below for troubleshooting. For example, ERROR: DW041 ... -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 1 error(s)
ERROR: DW041: INSTALLDIR Volume D:\ doesn't exist. ------------------------------------------------------------------------------------- System Requirements and it will not install, It says cant find the path D: im not sure why because as far as I can see its set to install on drive C: which is where I want it!

Exit Code: 6, Exit Code: 7 Installation Errors - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review your installation logs

I want to create an app. Can you tell me the difference between iOS developer program and the mac developer program?

I want to create an app. Can you tell me the difference between iOS developer program and the mac developer program?
Is the difference the device you're creating your app on, or for?

iOS Developer Program is only for those who wish to develop iDevice apps. Mac program is for those only developing Mac applications. If you wish to do both, then you need to enroll in both programs.

The difference among business process depicted in the billing plan?

Similar Messages

Maybe you are looking for