The difference between VTP server and transparent mode on Catalyst Switch.

Hello 
I have a question about the difference between VTP server mode and VTP transparent mode on general catalyst switch.
Basically VTP server mode can create and modify VLAN configuration but  actually there is not any VLAN configuration through running-config, is it true?  When I checked it on Cat3550, certainly there is not VLAN configuration on VTP server mode. But VTP transparent can create VLAN and configuration but does not synchronize with other switch VLAN status. I appreciate any related information and reason of the VTP server mode specification, thank you very much.
[VTP Transparent mode]
3550#sh vtp status
VTP Version                     : 2
Configuration Revision          : 0
Maximum VLANs supported locally : 1005
Number of existing VLANs        : 27
VTP Operating Mode              : Transparent
VTP Domain Name                 :
VTP Pruning Mode                : Disabled
VTP V2 Mode                     : Disabled
VTP Traps Generation            : Disabled
*omit
3550#
3550#sh run
Building configuration...
*omit
vlan 99
 name TEST-VLAN
[VTP Server mode]
3550#sh vtp status
VTP Version                     : 2
Configuration Revision          : 0
Maximum VLANs supported locally : 1005
Number of existing VLANs        : 27
VTP Operating Mode              : Server
VTP Domain Name                 :
VTP Pruning Mode                : Disabled
VTP V2 Mode                     : Disabled
VTP Traps Generation            : Disabled
*omit
3550#
3550#sh run
Building configuration...
*no VLAN like above configuration on VTP transparent mode.
Best Regards,
Masanobu Hiyoshi

Hi mhiyoshi,
3550#sh vtp status
VTP Version                     : 2
Configuration Revision          : 0
Maximum VLANs supported locally : 1005
Number of existing VLANs        : 27
VTP Operating Mode              : Transparent
VTP Domain Name                 :
VTP Pruning Mode                : Disabled
VTP V2 Mode                     : Disabled
VTP Traps Generation            : Disabled
*omit
3550#
3550#sh run
Building configuration...
*omit
vlan 99
 name TEST-VLAN
The above out put indicates that Vlan is created and then mode changed to transparent. i.e why revision no is 0.
3550#sh vtp status
VTP Version                     : 2
Configuration Revision          : 0
Maximum VLANs supported locally : 1005
Number of existing VLANs        : 27
VTP Operating Mode              : Server
VTP Domain Name                 :
VTP Pruning Mode                : Disabled
VTP V2 Mode                     : Disabled
VTP Traps Generation            : Disabled
*omit
3550#
3550#sh run
Building configuration...
*no VLAN like above configuration on VTP transparent mode.
This indicates that vlan never created in server mode nor learnt from another switch as revision no is 0

Similar Messages

  • What are the differences between application server and webserver

    pls give the differences between application server and web server with examples

    Google.
    Example
    http://www.google.ca/search?hl=en&q=Do+your+own+damn+searching&meta=

  • Differences between GKAPI server and client modes

    Cisco Gatekeeper External Interface Reference does not talk much about the server and client modes. Does anyone know the different between these 2 modes?

    Hi Krishna,
    Have a look at the two links below. They provide configuration examples for each of the two topologies along with explanation on the different commands used.
    http://docwiki.cisco.com/wiki/Basic_Load_Balancing_Using_Routed_Mode_on_the_Cisco_Application_Control_Engine_Configuration_Example
    http://docwiki.cisco.com/wiki/Basic_Load_Balancing_Using_One_Arm_Mode_with_Source_NAT_on_the_Cisco_Application_Control_Engine_Configuration_Example
    I hope this helps
    Daniel

  • What's the difference between OpenGL advanced and normal modes?

    I get that Basic mode uses the cpu and Normal uses the gpu, but what exactly does Advanced mode do?
    The description says that it uses as much of the GPU as Normal Mode does, but adds "advanced techniques to improve drawing performance."
    Has anyone seen one of these advanced techniques  in action or know of a list of these mysterious improved capabilities?

    What CC said... Imagine a shader having say a length of 32 discrete instructions/steps vs. one with 16... The 32 one will concatenate specific operations in one step and may thus be more optimized, but will not work on a card that does not provide those 32 shader cores, since it could not be executed in one clock cycle. Then you would use the 16 one with instructions being split across 2 cycles... That's all there is to it and for al lintents and purposes mostly irrelevant and unimportant to the user...
    Mylenium

  • What are the differences between Easy VSS and Traditional VSS on Catalyst 4500E with Sup 8E ?

    I would like to know which feature is different between Easy VSS and Traditional VSS.
    I know "Easy VSS is a new way of implementing VSS by using a single command" but I cannot find more information about it.
    Please help.
    Thank you.
    Nash

    Easy VSS is a simplified and automated way of configuring VSS for first time. Once a VSS is configured then it same as traditional VSS in functionality.
    There is no concept of layer 2 or layer 3 VSL link. VSL is the internal portchannel link and you cannot configure as layer 2 or layer 3 portchannel.
    Following is the link of Easy VSS steps.
    http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/XE3-6-0E/15-22E/configuration/guide/xe-360-config/vss.html#60764

  • Differences between One Arm and Route modes?

    Hi Guys,
    What are the differences between One Arm and Route modes? Can anyone please explain?
    Krishna

    Hi Krishna,
    Have a look at the two links below. They provide configuration examples for each of the two topologies along with explanation on the different commands used.
    http://docwiki.cisco.com/wiki/Basic_Load_Balancing_Using_Routed_Mode_on_the_Cisco_Application_Control_Engine_Configuration_Example
    http://docwiki.cisco.com/wiki/Basic_Load_Balancing_Using_One_Arm_Mode_with_Source_NAT_on_the_Cisco_Application_Control_Engine_Configuration_Example
    I hope this helps
    Daniel

  • Difference between Simple maintanence and Export mode and Organisation plan

    Hi all,
    Can any one please explain the difference between Simple maintanence and Export mode and organisational plan in SAP easy access.
    Thanks & Regards,
    Naga

    Expert Mode Infotype Maintenance: This interfaces allows you to edit individually selected objects in OM (Org Units, Positions, Jobs) via infotypes. 
    Expert Mode: Simple Maintenance Interface (PPOM_OLD) is used to quickly create a new Organizational Plan. As a user, you can pretty much maintain large volumes of data very easily ( i.e create several objects simultaneously), without having to go through the more "Performance Intensive" Org and Staffing interface.
    In accessing the Simple Maintenance interface to create your org structure, the initial screen requires you to specify which evaluation path you want to create your org structure.
    Organizational Plan: This is what provides you with a complete picture of an enterprise's environment. It comprises elements (objects like Org Units, Positions, Jobs etc) which are used as building blocks for creating an Organizational structure.
    Need more information? Let me know.

  • Difference between application server and central instance

    Hi everyone,
    whats the difference between application server and central instance and message server. where it will be installed. and how?
    Regards
    Basis Fresher

    Hi,
    just want to clarify that is is not correct that only one enqueue process can be configured on the CI.
    Please see the documentation within transaction RZ11 for the parameter Parameter : rdisp/wp_no_enq
    Short description : number of enqueue work processes
    Parameter description :
    You can use this parameter to define the number of enqueue work processes for the instance.
    Ensure that a value >0 is only set on the central instance that provides the enqueue server (instance rdisp/enqname ). One enqueue work process on the central instance is normally sufficient (rdisp/wp_no_enq = 1); only in very large systems can a higher value be useful.
    Kind Regards
    Thomas Alt

  • RE:difference between application server and web application server

    hi,
         i am a fresher to SAP.please tell me the difference between application server and web application server so that my doubt will be clarified.

    Hi,
    the SAP Web Application Server is the reliable, open standard-based application server from SAP. It supports both J2EE and ABAP, and serves as the underlying infrastructure for all new and upcoming SAP solutions, like SAP R/3 Enterprise, SAP Portal, SAP Exchange Infrastructure, and all other SAP components.
    The SAP Web Application Server is not a new product, it is the natural evolution of proven SAP application server technology formerly known as SAP Basis. It provides the platform to develop, execute, and operate Web applications and Web services as well as traditional SAP GUI based applications
    if it helpful rewards points are appreciated

  • Differences between Weblogic Server and Weblogic Server Suite?

    Hi
    What is the differences between Weblogic Server and Weblogic Server Suite, beside licens costs?
    Regards
    /Martin

    WebLogic server standard edition, you get the WebLogic with no clustering.
    Clustering is available in the WebLogic Enterprise Edition.
    The WebLogic Suite also gives you Coherence and JRockit real-time
    A desciption of the various products can be found here: http://www.oracle.com/us/products/middleware/application-server/index.html

  • Difference between maximum concurrency and batch mode in JDBC

    Hi All,
             Could som one tell me the difference between maximum concurrency and batch mode in receiver JDBC adapter?
    Regards,
    XIer

    Hi,
    The Max Concurrancy and Batch mode are used for performance tunning for JDBC adapter.
    Max Concurrancy is possible upto 5 only. so even if you will be taking up 10 it will by-default take 5.
    The number of records being processed depend on the size of each record. for e.g Per minit XI Is Processing 50 Records,It will Take lot of time to process all Records.
    So if you set Max concurrancy as 5 then at time 5 messages will be processed simultaneously.
    In Batch mode it will, collect the multiple SQL statements that will be created for records to be processed and processed at a time. It will  improve performance considerably.
    But Batch Mode is possible with only INSERT, UPDATE, DELETE etc.
    The Stored procedures can be executed with max concurrency
    Thus it completely depends that on the no of records to be processed at a time and volume of Mesasges.
    Thanks
    Swarup

  • What is the difference between jsp :include and server side include

    what is the difference between jsp :include and server side include(request dispatcher include method)????
    i understand that both request dispatcher include method and jsp:include take dynamic data,so when would one use request dispatcher include and when jsp:include.
    Is the usage interchangeable?i believe jsp include is used only for jsp/html but include directive can be used to include servlets ,jsp and html....correct me if i m wrong and
    do suggest if u hav ny other diff in this context...

    The difference really is: in what format do you want your inclusions? If your environment has many Java developers and only a few designers that focus mainly on, say, Flash, that might push you more towards the server-side include() directive. Or, if you have a large set of pages that receive dynamic content that is displayed in a consistent fashion (such as a workflow header area on a page).
    If, on the other hand, you have more web designers, there may be a greater desire to deal in markup rather than Java code. Java developers themselves might prefer to view markup (JSP) that more resembles the eventual output than something occuring in Java code.
    Finally, there are considerations of tiering. While it is totally possible to (and I have previously) implement 'view classes' that render markup or generate layout templates, JSP's offer, IMO, a subtle, psychological advantage. By forcing a developer to work in a different format, markup versus Java source, the separation on view from controller and model becomes a bit easier. It is still possible to make mistakes, but if a developer at some point notices, "Wait, I'm in a JSP, should I be importing a java.sql class?", then the choice to use JSP includes has paid off in spades.
    - Saish

  • What is the difference between Component,Server,Tool and Software?

    HI,
    What is the difference between Component,Server,Tool and Software?
    SHABEER

    Hi
    Every individual part that constitutes in making an SAP System is called a COMPONENT.e.g DB instance, Java CI, ABAP CI etc
    SERVER is the actual composition of different components of SAP.e.g. a database alongwith can instance would constitue an application server.
    TOOLS are the products from different organisations (SAP or Non SAP) that can be used for different functionalities like keeping a check on jobs, monitoring of the system , e.g Tivoli
    SOFTWARES are a kind of tool that help you to bring up results from the system in a user acceptable format. These are utilities that act as interfaces between the user and the system.
    regards
    Chen

  • What's the difference between client combo and server combo? Also, what would happen if I install both?

    what's the difference between client combo and server combo? Also, what would happen if I install both?

    One is for the base version of the Mac OS, the other is for the Server version. You can only install the one that matches your system.

  • Which is the difference between Windows server on IA64 and on x64?

    Hello,
    I want to download the last update of MaxDB 7.6 on servers 32bit and 64bit.
    For the version 32bit there exists only for Windows server IA32.
    For the version 64bit there exists for Window server IA64 and x64.
    Which is the difference between Windows server on IA64 and on x64?
    The version 32bits for Windows IA32bit functions for any type of server?.
    Best regards
    Frédéric Blaise
    e-Kenz S.A.

    For the version 32bit there exists only for Windows server IA32.
    IA32 is basically x86
    Which is the difference between Windows server on IA64 and on x64?
    IA64 is based on Itanium processors while x64 are x86 compatible.
    The version 32bits for Windows IA32bit functions for any type of server?.
    For any Windows 32bit server.
    Regards
    Juan

Maybe you are looking for

  • Joining Quotes with Orders in OBIA Siebel Sales

    Hi Gurus, I need to find a way to join the Quotes with the Order in the OOTB RPD from Siebel Sales implementation. I am trying to join with the Row_WID but i do not get any results for the below query, i want to have the the Quote number and the rela

  • AD target Recon-Change User Id event is not generating

    Hi All, I have configured my OIM 9.1 with AD for target recon. I am using MSFT AD 9.1.0.0 connector pack. I wanted to check if user id field is modified in AD directly, does it reflected in OIM on next recon. For that i have modified the user's user

  • Problem registering my iPod

    It seems there's a problem with the Registration Information page when I choose to register my iPod. No matter what I do, it keeps saying that the postal code i've entered is incorrect: "The postal code you entered is not valid for [?]." I've chosen

  • Photoshop cs4 rectangle tool error

    Hi I am using photoshop cs4. In my cs4, rectangle tool having a problem see this image

  • Freaky backup ghost in my Mac!

    Something is backing up my files on a regular basis. That's great ... except I don't know what it is. Welcome to the highly amusing mystery! I was about to wipe my drive and install Tiger tonight. To do so, I was going to make a full copy of my home