The dimension of my illustrator CC is out of range, i cant make the size bigger than 577.95cm

the dimension of my illustrator CC is out of range, i cant make the size bigger than 577.95cm, please help

hi
No i have been using illustrator CC version for six months, I can adjust
the size to 1000cm above before. Its all of a sudden like this so there
must be something i can do. I have been using illustrator with different
version for more than five years , have been setting it for larger file for
laser cutting , it was totally fine.

Similar Messages

I used scripting brigde to add a movie that has size bigger than 5GB, exactly after two minutes iTunes return a failed, but the processing of the file is actually added to iTunes Library successfully. The copying take more than 5 minutes to complete. Why?

I used scripting brigde to add a movie that has size bigger than 5GB, exactly after two minutes iTunes return a failed, but the processing of the file is actually added to iTunes Library successfully. The copying take more than 5 minutes to complete. Why the iTunes Scripting Brigde returned failed when it is actually success? It occurred exactly 2 minutes after submit the request to Scripting Brigde. Is this 2 minutes related to the Apple Event time out? if it does, how do I get around this problem? thx

I can tell you that this is some of the absolutely worst customer service I have ever dealt with. I found out from a store employee that when they are really busy with calls, they have third party companies taking overflow calls. One of those companies is Xerox. What can a Xerox call center rep possibly be able to authorize on a Verizon account? I'm Sure there is a ton of misinformation out there due to this. They don't note the accounts properly or so everyone can see them. I have been transferred before and have asked if they work for Verizon or a third party also and was refused an answer so, apparently they aren't required to disclose that information. I spent a long time in the store on my last visit and it's not just customers that get the runaround. It happens to the store employees as well and it's beyond frustrating.

PS CS6 on the mac pro: the bruch in hard and soft is the circle of the bruch bigger than then the effect. How can i bring it to normale? /Users/jorisneyt/Desktop/Schermafbeelding 2014-11-07 om 10.04.59.png

PS CS6 on the mac pro: the bruch in hard and soft is the circle of the bruch bigger than then the effect. How can i bring it to normale?

Go to System Preferences>Accessibility>Display and the set the Cursor Size to Normal

Aperture 3 - why does is the library bigger than the original..huge in fact

Dear Friends...
I've been trying to get 100k images into my A3 library as simple reference files. I've chosen file>import>folders as projects as my path and selected "at current location" in the store files dialogue. As a test I used a folder with 12gb of images to see how this would go. It has ballooned out to over 40gb in the library. Crazy...and unusable.
Ideally I want to simply drag in all my files as reference files (in Aperture 2 I did this and held down the apple/option keys and voila, the loaded up just fine). I don't want to carry around my entire disk of originals...just the references in a smaller hd and go on with my work.
What am I missing here?
Many thanks for

Some thoughts:
-- Did you miss type during import? Look inside the Aperture Library Package and see how large the Masters folder is; you may have duplicated your files.
-- How big are your masters and how big are your previews? Aperture defaults to a very high quality preview which can actually be larger than a source JPEG. I have my previews set to one size smaller than my monitor and quality 5. This is more than enough for me and results, with mostly RAW masters, in a 1/4 - 3/4 ratio of previews to masters. Remember, even if you reset the preview size smaller, you will actually have to purge the old ones to get the space back. Check the manual for instructions on how to do this. Rob Boyer has written extensively on preview strategies.
Finally, should you purge/rebuild your previews, consider a defrag after you finish. This can really speed up scrolling operations, etc.
DiploStrat

I want to make font size bigger in the Bookmarks sidebar?

At 2560x1600 resolution, all the fonts are teeny tiny. I'd like to make them bigger individually in the sidebar, menus, etc. This would be the only change I'd ask for over version 3.6.

If you need to increase or decrease the size of fonts and other elements in the user interface and web pages then increase the String pref layout.css.devPixelsPerPx from 1.0 to 2.0 in 0.1 steps to see what works best.
In current Firefox versions this pref is a String value parsed to a float and allows to fine tune the dimensions of all elements (user interface and web pages) more precisely.
See also http://kb.mozillazine.org/about%3Aconfig
If the content on websites needs to be adjusted after changing prefs then you can look at NoSquint or Default FullZoom Level.
* Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
* NoSquint - https://addons.mozilla.org/firefox/addon/2592

Video screen size bigger than the default

Hi everybody,
I´m having dificults in change the size of the video
object size, because its pixelated. Its the same effect when I zoom
the stage.
The video object default is 160x120.
I´ve set the mycam._width = 320 and so on...
but pixelate..
Any help is valid
Thanks

You need to use the setMode method of the camera class.
http://livedocs.macromedia.com/fms/2/docs/wwhelp/wwhimpl/common/html/wwhelp.htm?href=00000 546.html

Field of view: in the programme bigger than on the camera display

The following problem occured:
When I captured footage into Adobe Premiere Elements I recognized that the field of view in the programme was bigger than the one I saw on the display of my camera. I mean, there were objects in the left and in the right corner of the frame, which I did not intend to shoot (and which I did not see in the viewer, as well).
Are there any settings I should consider?
Any answers appreciated.

This is fairly common. Few cameras have 100% view. Some show a bit more, but most a bit less.
Now, depending on how you are going to output the footage, it might be no problem. If you're going to TV, via DVD, then the overscan of CRT TV's will possibly crop this extra area off. If you are not sure, or your audience will have newer LED/LCD/etc. TV's, you can do one of several things.
1.) Keep things just as they are, and use the Garbage Matte to eliminate the offending objects. You'll end up with a bit of black, around your final image, unless you have some sort of background behind it.
2.) Keep things just as they are, and use Crop to do about the same. Same result as above.
3.) Use Motion Effect>Scale (and possibly a bit of Position), to enlarge the image to beyond the screen area, approximating what you saw in the viewfinder/LCD. Since you will only be doing a tiny bit of this, quality will not suffer.
Personally, I'd use #3. Trust me, this is far easier in video, than it ever was with film. Without a good budget, it meant a re-shoot, should a mic swing into the frame, or a lightstand peek in at the corner!
Good luck,
Hunt

Is the 5c screen size bigger than 4s? i have vision problems

I have vision problems and need the biggest screen Apple makes. Does the 5c's screen make a significant difference versus the 4s ?

Hey blueliner15!
I have a site for you that can help you answer that question:
Apple - iPhone - Compare Models
http://www.apple.com/iphone/compare/
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Index out of range when trying to create a new dimension (reporting type)

I just created all my dimensions/characteristics, created 2 cubes/infocubes (rate & ownership) in my new appset called 'CONSOLIDATION' and I can't seem to create a 'reporting type cube'.
When I try to create a cube called TEST or CONSO... (generic, finance or conso) it says 'index as out of range. Must be non negative & less than the size of the collection. Parameter name : index'. The message pops up immediately, before I can even try to choose dimensions.
Anybody who has a clue, I look forward to suggestions.
Regards
Nico

Hi Sorin,
Thanks for the reply. If I understand correctly, then in my application set, I cannot create any non-reporting type application? As we have deleted the 'Rate' application which was delivered along with APSHELL. Is there any way out to overcome this as from your reply, it seems not possible as the system needs a reference application belonging to the same application type.
Many Thanks for your reply.
Santosh

Index out of range when trying to create a new Application

When I try to create an Application (Such as Consolidation,Ownership,Rate ) getting an Error Message 'Index as out of range. Must be non negative & less than the size of the collection. Parameter name : index'.
But i could able to create generic application with no issue.
Any leads would be appreciated .
Best Regards
Ram

Hi,
Could you please check if an application has 'Journal' in use in your application set.
If so, it might be the cause of the issue.
This was reported some time ago. You can get rid of that by performing those steps. Before that, be sure to have a copy of all those below tables before doing any change (in order to be sure not to loose anything):
1. In tblapp, anything that has a '1' for Journal has to be changed to '0'
2. Deletion of all tables beginning with JRN.
3. Then, try to recreate your application, add needed dimension and do not forget to check both options (Re-assign SQL index and Process application).
Hope this will help.
Best Regards,
Patrick

Out of range output video size ?

Hello,
I would like to use a camera which has a large output size, more than 1920x1080.
When I select the camera, I've a message :
Out of range output video size
One or more output video width and height are out of range. Please provide video size in range 80x60 to 1920x1080.
Is it a limitation of FMLE or FMS ? (I think it's FMLE because the message appears even if the "save to file" is the only publishing format selected)
Is there a way to edit a confugration file to remove this limit ?
Best regards,

why don't you change that background to what you want in desktop system preferences when the second monitor is connected? different monitors have different desktop backgrounds and they remember the settings from the last time they were connected.

How To Increase the Size of Memo Fields 4000 Char in WebCenter 11g?

How To Increase the Size of Memo Fields greater than 4000 Char in WebCenter Content (UCM) 11g?
I was able to increase the size of Memo field from 2000 Char to 4000 by setting parameter value MEMOFIELDSIZE=4000 . But the requirement is to increase the size more than 4000 around 7000 char but Database(Oracle 11G) is not supporting more than 4000 char.
Is there any other way to increase the size of Memo field?
Thanks in Advance!!
Regards
Ram

Hello All,
Thanks for your responses.
Let me explain the scenario again in detail:
1. we have three meta-data fileds xProductCategory,xProductFamily and xProducts
2. These fields are related with DCL feature and corresponding values are being stored in corresponding custom Views
3. xProducFamily is dependent of xProductCategory and xProduct is dependent on xProductFamily
4. currently, there are around 250 Product values and average name of Product can be of 25 Char, so if we are selecting all product values for some Contents then Product Values are being stored in DocMeta table as comma separated values with one space, so total characters are being very high than 4K Char.
5. Currently view that is storing the Product values, stores "Name" column instead of ID(like 1,2,3....)
6. And our Content Server is integrated with Oracle WebSenter Portal, where logic has written to retrieve the contents based on "Product Name" instead of "Product ID" and already we are in UAT phase.Currently we are not in situation to revert the changes from Product Name to Product ID.
7. Also if we are storing the values on the basis of Product ID, then again the issue may arise in Future, if the number of Products increased.
Hoping the issue explanation is clear now and waiting for some possible solution for increasing the length of memo field.
Thanks in Advance !!
Regards
Ram

Controlling the size of a calendar

Can someone tell me how I can control the displayed size of an APEX calendar region? I'd like to make the calendar bigger than the default size but I can't seem to find a way to do it.
Thanks for your help,
Dale

Hi,
In livecycle, select the masterpage node. In the page tab, specify, for instance, 13in in the height property. Put the object at the end of the page, and mark them as visible but don´t print. In acrobat chose "none" in page scaling property (or print with a print button inside the form and control the scaling property form there).

"The dimensions of this page are out of range"

Hi,
I'm having some trouble opening some pretty big posters I was creating. They contain some non-vector image files, so I decided to design them at the full size, rather then scale up in the end. Although a bit slow with size lag it was not an issue. In fact I have saved and re-opened them a few times with no trouble.
Now however, I made an edit to a single background psd file in photoshop (it's now smaller in size) that runs consistent through all 10 of the posters. I went in to update/edit each file again, and saved them no problem. Upon attempt to reopen I am sporadically getting the error "The dimensions of this page are out of range." Some files have this, others don't. One didn't have it, then a close and reopen brought it on.
I did a few searches here and elswhere and everyone seems to recieving this error when TRYING to save. Not after saving has already happened.
Does anyone have any suggestions to getting these files working again?

I'm currently trying to save an Illustrator CS4 document with two artboards to PDF (artboard #1 is 176.81in x 123.41in, artboard #2 is 206.0in x 66.08in), after finishing the Progress dialog "Saving...", an error dialog appears exclaiming "The dimensions of this page are out-of-range". These sizes are already the least I can have, what am I to do for it to properly export to PDF? (It has problems exporting to JPEG as well, but let's try to figure out one problem at a time.)
Any help will be greatly appreciated. Time is of the essence.

Error "The Dimension of this page are out of range"

Please help me with this error i continue to get while attempting to save my work in Illustrator CS3
"Acrobat PDF Format is having difficulties. The dimension of this page are out of range"
The original artwork was massive so i figured it could have been because of the size. I scaled the artwork down by 70% but got the same message. I then created a new document which was A3 in size, I copied the artwork over to the new A3 doc in a single layer but the error still continues.
I have never seen this kind of error before and i cannot work out how to solve the issue - I need to save this work!
Please help

Hi,
I have a similar problem with a page with 5400 mm width. I have no Crop Selection on the page.
Every time I try to save as a PDF an error message pops up: "Acrobat PDF file Format is having difficulties. The dimensions of this page are out-of-range."
I tryed to reduce the page dimensions until it worul let me save as a PDF file.
With a 5050 mm widht the PDF could be saved. So I must conclude the PDF must have a widht (and hight) limit to be able to export.
My "solution" was to reduce the size to 50%, save the PDF and inform the printer of this reduction.

The dimension of my illustrator CC is out of range, i cant make the size bigger than 577.95cm

Similar Messages

Maybe you are looking for