The disc inserted does not have enough free space

I created a disk image about 451 MB, it an Audio Disk. When I try to write the image to a blank Memorex CD-R 700 MB I get the message: "The disc inserted does not have enough free space".
When I created the image I used the disk utility and followed the help file instructions. When I open File> New> I can only select "disk image from folder", the other option is grayed out.

wow, this is my first real disappointment with my MacBook. I can't burn images, technical support didn't get me any further than I already was. I spent half a day trying everything in the world to burn an image with no success.(followed all the help instructions) Now I have to go into the Apple store to have them go through all the same stuff I went through today. Two days of working on this computer to burn a CD with no success.
My guess is that at the end of the day tomorrow I will walk away from the store with no computer because of a malfunction. What a wasted weekend.

Similar Messages

"Disc inserted does not have enough free space"

I am ready to burn my slideshow on a DVD. The info window in the project indicates that I am well within the parameters to fit on a DVD (4.7 GB). All the gauges are green. However, when I go to burn the disk I get the error message: "Disc inserted does not have enough free space". Looking at the info palette from the Finder window regarding the disk image, I find that it requires 5.8 GB, which, of course, won't fit. How come the iDVD project says I am good to go when I am not?
I have OSX 10.4.11 and work on a G5. I have 53 GB available.

Perhaps you may wish to use Dual Layer DVD-R Media (Verbatim / Maxell) in the event your mac supports this newer media. If not, you can add an ext. FW Burner preconfigured from Lacie or do what I did and build your own:
http://discussions.apple.com/thread.jspa?messageID=5826029&#5826029
and here's how I select Dual layer via the ext. FW Burner as opposed to the stock S-drive:
http://discussions.apple.com/thread.jspa?messageID=5566746&#5566746
The only other option that comes to mind for SL as well as DL medias is burning said image with Roxio Toast (fit to disc option).
Message was edited by: SDMacuser

How do I fix Your hard disk does not have enough free space?

How do I fix Your hard disk does not have enough free space?

Select the icon of your startup volume ("Macintosh HD," unless you renamed it) in the sidebar of a Finder window, and open the Info window. How much space is Available? Specify gigabytes (GB) or megabytes (MB).

Inserted DVD+R DL Does not have enough free space

I am trying to burn a Disk Image that is 6.9 GB to a DVD+R DL 8.5 GB using Disk Utility but I keep getting the error message that there is not enough free space. I have inserted a few different blank discs and I keep getting this error message. Using 10.5.6 Superdrive with iMac. All I can think of is the Disk Utility is not recognizing the DVD as a DL, or possibly I need to convert the Disk Image to something I don't know about or use iDVD. Please advise. Thanks.

hotwingz, Welcome to the discussion area!
How much free space do you have on your hard drive? To burn a 8.5 GB disc you would need at least 8.5 GB free on the hard drive. Usually you need twice that (17 GB).

Warning that the GPU accelerated ray-traced 3D renderer does not have enough free memory to operate

[UPDATE: Memory handling for the ray-traced 3D renderer is greatly improved by installing the After Effects CC (12.2) or After Effects CS6 (11.0.4) update.]
You may see a warning message when using After Effects CC (12.1) that the GPU accelerated ray-traced 3D renderer does not have enough free memory to operate.
When the GPU acceleration of the ray-traced 3D renderer is disabled, the CPU version of the ray-traced 3D renderer will operate.
The message about the GPU-accelerated ray-traced 3D renderer not having enough free memory to operate is because of a change in After Effects CC (12.1) to actually warn you when your computer was in a dangerously low VRAM state. In After Effects CC (12.0) and After Effects CS6 (11.0), a computer with very little VRAM could still try to use the GPU accelerated ray-traced 3D renderer, but it would very, very, very often crash. So, now, After Effects CC (12.1) is just detecting the condition that would lead to a crash, telling you about it, and disabling the GPU acceleration until you have dealt with the problem.
So, how do you deal with this low-memory condition? You free up VRAM. This means closing all applicaitons that use GPU memory, which includes web browsers (yes, web browsers these days use the GPU). It also means disconnecting additional monitors, each of which uses a lot of VRAM. In some cases, restarting the computer is necessary.
This is primarily a problem on Mac OS with cards with 1GB of VRAM, such as the GT 650M in the MacBook Pro. These cards on this OS have just barely enough GPU memory (VRAM) to make use of the GPU-accelerated ray-traced 3D renderer under even the best of circumstances. If you want to use the GPU-accelerated ray-traced 3D renderer, you should really be using a more powerful GPU, one with more VRAM.
Note that this has nothing to do with the OpenGL GPU features in After Effects. Details of the GPU features are here: http://blogs.adobe.com/aftereffects/2012/05/gpu-cuda-opengl-features-in-after-effects-cs6. html

hey Todd
i have the exact same problem but with my new macpro with renderay no matter what i do even a simple 3d extraction the renderay crashes! My cuda is full up to date and everything not sure why! if you have any way to resolve this issue would be awesome and help us out since i am on a deadline! at the moment!
I have attached a few screen shots and my computer specs! as you can see the GPU Should not be running low on memory xD since its pretty much nearly full speced!
The error!
This is what was there! and all i added was a extractor after this and the error above appears!
and this is my computer specs as you can see there is no lack of Power, Ram or VRAM here! so not sure why this error is occurring even after updating CUDA
if you have anything else i could try please let me know! Thanks!

I'm getting this error with bootcamp "The startup disk does not have enough space to be partitioned"

Here's the story...
I had a dual boot configuration on my mac with Mac OS X Lion and Windows XP (made with bootcamp).
I decided to reinstall windows.
I deleted the windows partition using BootCamp.
Tried to recreate the Windows partition with Boot Camp and got: "The startup disk does not have enough space to be partitioned You must have at least 10 GB of free space available"
After reading several posts on this forum I decided to defrag the hard drive and try again.
The defrag did not work and I'm still getting the error, I have 22 gb of free space on my drive.
Any suggestions?
Also, I tried repair disk and repair permissions
Hmm, my external harddrive says on the box "OS X 10.5.8 or higher (32-bit kernel only)" Could the 32-bit requirement be an issue? Is lion 64-bit?

Boot Camp must be able to allocate a contiguous block of space on the drive. If it cannot find 10 GBs of contiguous space, then you cannot create the Windows partition.
You will have to backup your OS X partition to an external drive, boot from the external drive, use Disk Utility to repartition and reformat your hard drive back to a single volume, then restore your backup to the internal hard drive.
Get an empty external hard drive and clone your internal drive to the external one.
Boot from the external hard drive.
Erase the internal hard drive.
Restore the external clone to the internal hard drive.
Clone the internal drive to the external drive
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive and click on the downward pointing arrow button.
After startup do the following:
Erase internal hard drive
Open Disk Utility in your Utilities folder.
After DU loads select your internal hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed. Do not quit Disk Utility.
Restore the clone to the internal hard drive
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the internal hard drive. Source means the external startup drive.
Note that the Source and Destination drives are swapped for this last procedure.

"The startup disk does not have enough space to be partitioned?" WHY!??

I"m trying to intall windows 7 on my Macbook air OS X 10.6. When i enter bootCam i get this error "The startup disk does not have enough space to be partitioned" . It says I need 10GBs of free space, even though I have 500GBs of free space on my drive external hardriver.
I did my research, and a lot of people are saying to use idefrag and defrag the hardrive, which i did. I also verifed disk permissions and repaired disk permission and all the other stuff.
What should i do? Apple hass the shittiest service. I spend $1100 bucks for something and i don't even get support without paying? to me, that's BS. so if anyone could help i would greatly appreciate it.

Thanks Bob.
And now to close this thrilling episode we will sing the "Dragnet Theme Song". All together now.....
“Dum De Dum Dum…”
“Dum De Dum Dum Dum”

Hello, Trying to run Bootcamp on my 15" Macbook Pro (Maverick).60 gig available on my computer's hard drive and 250 gig on a separate hard drive that I have attached which is single partitioned. Keeps saying "The startup disk does not have enough space"

Hello,
I'm trying to run Bootcamp on my 15" Macbook Pro (Maverick). I have 60 gig available on my computer's hard drive and have 250 gig on a separate hard drive that I have attached, which is single partitioned (MS-DOS FAT). It keeps saying "The startup disk does not have enough space, you must have 28 gig of free space available" Does anyone know what I'm doing wrong? Any help would be much appreciated.

Thanks for the advice Bob The Fisherman. I'm just reading what turbostar has kindly written and it appears that perhaps, if I take advice from you both, I need to free more space up on the computer's hard drive?
With the external hard drive; would it be advisable to defragment? Know of any defrag freeware for Mac OSX?
Many thanks to you both.

The startup disk does not have enough space to be partitioned

I have a custom upgraded Mac Mini (from 1.6 Core Duo to 2.33 Core 2 Duo & 64GB SSD - a fast little machine!) Under Leopard 10.6.6 & could create a BootCamp partition. Now after a reformat & upgrade to 10.6.7, BootCamp reports, "The startup disk does not have enough space to be partitioned". BootCamp says it needs 10 GB free space. The Finder says there is 23.4 GB available.
Has anyone else run across this?

Backup. Format. Restore.
Windows 7 needs 40GB+
HFS needs 20GB/20% free space to function.
64GB is fine -- but just one OS, not two.
you might squeeze OS X into 30GB if you move and trim a lot.
Windows 7 SP1 32-bit - the updates take 9GB of space (temp) on top of 20-25GB plus you'll need to disable page, hibernation, not install programs, and leaves little for TRIM and Garbage Collection.
When Windows gets too low, you can be blocked from login or runnng.

DFSR Error that the server does not have Adequate free space. But it does.

Hi, I have a 3 memeber DFS replication group on Windows 2008 R2 servers. On one of members replication stopped and the Health diagnostics report states that there is not enough disk space on the drive to replicate. But there is. It
replicates to the other member with much less free space. I have increased the staging quota after running the caculation command in Power shell to determine the largest 32 files. There is pleanty of free space. I have restarted the
DFS service and restarted the server. I have created a new Replication group on the same volume and it works fine.
Any Ideas?
Steve
Steve

Hi Steve,
It will only copy the changed data to sync all files when re-add the failing member server back to the replication group. If the changed data is very large, you could do a robocopy to copy the changed data, then re-add the failing member server back to the
replication group.
You could refer to the article below to know some considerations when re-add a member server back to a replication group.
After you re-add a member server to a DFS replication group in Windows Server 2003 R2, initial replication does not occur on the member server, and changes in the replicated folder are replicated unexpectedly to other replication partners
http://support.microsoft.com/kb/961655
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Disk Utility reports DVD disc does not have enough space

I am trying to create backup DVDs of some valuable data using my Macbook
I have used Disk Utility to create a disk image of the original DVD. When trying to burn the image to the blank DVD (4.7GB DVD-R), Disk Utility reports: 'The disc inserted does not have enough free space'. This occurs for both a disk/disc image of 4.26GB and one of a mere 451MB.
Any ideas on how can I overcome this?
PS: when is a disk a disc and vice-versa? Apple don't seem to know; the spellings above are verbatim.

If you are trying to duplicate the DVD then I suggest trying this:
Duplicate a CD or DVD
1. Insert the DVD/CD;
2. Open Disk Utility, and select the DVD/CD from the left side list (select the DVD/CD icon on top);
3. from the DU File menu select New | Disk Image from Disk 1;
4. Choose to format the disk image as DVD/CD Master, name the disk image and click Save;
5. When the .cdr file is finished select it with mouse and press COMMAND-I to open the Get Info and check the box to lock the file;
6. Choose the .cdr file from the left side list, click Burn, and insert a new, blank DVD or CD.
Otherwise I would consider using backup software that can span a backup across multiple optical media such as Retrospect, Toast, etc. You can look for them at VersionTracker or MacUpdate.
It's hard to offer more because you really did not provide any detail on precisely what you are doing and how you are trying to do it. More information may enable us to provide better suggestions.

My external LaCie drive gets an error message "the disc you inserted was not readable by this computer." The only options offered are "ignore" or "eject" Disk Utility sees the disc but does not give a repair option. What can I do?

When I plug in my external LaCie drive I get an error message "the disc you inserted was not readable by this computer."
The only options offered are "ignore" or "eject"
Disk Utility sees the disc but does not give a repair option.
What can I do?

The good thing about mac-centric resellers such as OWC, is they have people on staff that can answer questions without you buying things first. They also have how-to information, and instructions are included in many of their products. I saw a link to watch a DIY video in one of their pages; an example of a RAID (with its own power supply) is shown on their drives page. Also a few in there, with no power supplies, for less money.
If I were looking to backup and perhaps also have a partition for a system clone, I'd consider something like one of these: http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
Some ideas on the RAID backup methods appear in google search, some of the pages are ideas and concepts; and the better ones also warn about using RAID for the only backup plan.
Oh, OWC has live chat. Haven't tried it, nor have I bought anything from them. I have what appears to be two products from them, but have not used either. One is in a box as-new, but has only USB2.0 ports & my Macs needed FW400/800. It has been said their RAM is a good way to upgrade, too. But I can't confirm!
A 'RAID-ready' unit for backup may be more versatile for just that, but I have not checked into these details. I use single HDDs in powered enclosures, and usually manually make backup clones to FW drives, of bootable OS X systems. Some of the OWC raid-ready use eSATA ports so that may not be viable for a computer without them.
The unused in-box external drive I have is like the base model in the link above. However mine is USB2.0 (maybe) and won't boot my older Macs due to hardware variance; and my preference would be for FireWire options, these models do offer that. But the one I have does not. Dual 500GB HDDs, and they could be used in tandem as a RAID. That would be a choice set up in software. I'm not sure and not interested enough to read up just now.
My backup method is not automatic, or a moving backup plan, if I don't get a move-on and make full system clones. I do make copies of photos and documents the manual way, to USB external drives; and occasionally backup to DVD or CD media. And USB flash, that helps to move files between computers without need to use file sharing via wi-fi. {Like Why fly? Walking is better exercise unless one is a bird. Squawk!}
https://www.google.com/#q=raid+backup+mac
Depending on the ports in your Mac, you may be able to use other cables to attach between a backup or externally enclosed hard disk drive with multiple partition and bootable clone in one of them. Not sure about the Thunderbolt, and where that is the main port, adapters are required to access other devices, as allowed.
Anyway, I am going on and on, yet not really saying anything.
My ideas would not be all that interesting to follow as a backup
plan when matching available newer hardware to task, but you
can get some into better ideas if you are not in a rush. Get a
good setup and then look into more an betterer stuff.
Good luck & happy computing!

Upgraded to Yosemite and now my Time Capsule says it does not have enough space to complete backup, yet it has 500 GB free space?

I have just upgraded to Yosemite and now my Time Capsule says it does not have enough space to complete backup, yet it has 500 GB free space?
I am using the latest mac book pro and hacvent added anything aside from the upgraded iOS so not sure why the Time Capsule is saying that there is not enough space.
How can i fix this problem?

Time Machine has to completely index all of the old backups that are already on the Time Capsule before you can run a new backup successfully.
That process is going to take a long time......probably 6-10 hours or more if your Mac is connected to the Time Capsule using a wired Ethernet connection.
If the Mac connects using wireless, it may take a day or two for the process to complete depending on the speed of your connection and the amount of data that you already have on the Time Capsule.
Wait a day or two for the indexing process to complete and then try to run a new backup again.

Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB hard drive and only 120GB Macbook. It worked fine before the latest Maverick's

Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB external hard drive and only 120GB Macbook. It worked fine before the latest Maverick's update. Any help would be greatly appreciated.

My guess would be it has created an entirely new backup of your drive when you upgraded to Mavericks.
See Here: http://pondini.org/TM/1.html
And here: http://pondini.org/TM/9.html
Peruse the whole site. There is a lot of information there.

The disc inserted does not have enough free space

Similar Messages

Maybe you are looking for