The disk configuration is not insync with the in-memory configuration. Software RAID 1 reactivation

In trying to reactivate disk 3 of a raid mirror failed redundancy I get the error - The disk configurationis not insyncwith the in-memory configuration. The drive is accessible but I have no idea which of drive 2 and 3 are in use, drive 2 has unspecified
errors but there is the option to reactivate disk 3.
Does anyone have any idea what this means?
I am running on a HP Proliant ML350 G5 with Windows Server 2012
Thanks

Hi,
Since the Disk 2's status is Errors, we could not reactivate disk 3. Please try to reactivate disk 2 to check the results.
If the disk does not return to the Online status and the volume does not return to the Healthy status, there may be something wrong with the disk. You should replace the failed mirror disk region.
For more detailed information, please refer to the article below:
Volume status descriptions
http://technet.microsoft.com/en-us/library/cc739417(v=ws.10).aspx#BKMK_2
Best Regards,
Mandy
If you have any feedback on our support, please click
here .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

I have a 1TB WD external hard disk, which suddenly cannot be detected in my system. When i connect the hardisk to the macbook, the disk appears and immediately disconnects with the message "Disk not properly ejected". Any advice ?

I have a 1TB WD external hard disk, which suddenly cannot be detected in my system. When i connect the hardisk to the macbook, the disk appears and immediately disconnects with the message "Disk not properly ejected". Any advice ?

verify on another Mac if the same
WD is having issues with mavericks as you can see on the WD forum, did you install any WD software (never do that) when you connected the drive for the first time?
possible issue is a dead SATA bridge card or the new WD firmware w/ Mavericks.
SATA card issue
Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD
http://community.wd.com/t5/External-Drives-for-Mac/bd-p/passport_mac
verify on another Mac if all possible

After REFRESH the cached object is not consistent with the database table

After REFRESH, the cached object is not consistent with the database table. Why?
I created a JDBC connection with the Oracle database (HR schema) using JDeveloper(10.1.3) and then I created an offline database (HR schema)
in JDeveloper from the existing database tables (HR schema). Then I made some updates to the JOBS database table using SQL*Plus.
Then I returned to the JDeveloper tool and refreshed the HR connection. But I found no any changes made to the offline database table JOBS in
JDeveloper.
How to make the JDeveloper's offline tables to be synchronized with the underling database tables?

qkc,
Once you create an offline table, it's just a copy of a table definition as of the point in time you brought it in from the database. Refreshing the connection, as you describe it, just refreshes the database browser, and not any offline objects. If you want to syncrhnonize the offline table, right-click the offline table and choose "Generate or Reconcile Objects" to reconcile the object to the database. I just tried this in 10.1.3.3 (not the latest 10.1.3, I know), and it works properly.
John

I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password. How can I reset the old ipod without affecting the new one and how can I unlock the old one?

I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password. How can I reset the old ipod without affecting the new one and how can I unlock the old one?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software

The creditors report is not matching with the G/L account

Hi Gurus,
The creditors report is not matching with the G/L account ,where i can go and find out the differences ?
Please give me advice,
I will assign points
Thanks&Regards,
Kumar

Hi Kumar,
There could be three reasons.
1. You may have more than one recon accounts for different vendor groups. So, you need to select all the GL accounts when reconcile with Vendor balances.
2. You may have some special GL transactions, which may post to different reconciliation accounts. Please check Special GL transactions (Down payments so on)
3. Your vendor recon accounts may be changed after some postings. Please check. If changed, you need to select these GLs also for reconciliation with vendor balances.
Hope this will help you. If not clear please reply, I will explain you.
Pl. assign points if useful.
Thanks

The vendor account is not associated with the file you are trying to open.Please try again.

Please help me to understand what is the problem with the set up of the program. I bought an ebook from an internet site to which my IP address was blocked (in country 1). My brother bought it on a computer in country 2 and wanted to download and send me the file so I can open it on my computer. He set up initial download without Adobe ID. Afterwards he downloaded the pdf and send it to me. I tried to upload it with my ADE reader but it didn't work without ID. My brother then deleted afterwards his ADE and installed it again, downloaded the ebook again but this time setting up an ID. He transferred me the file ,I used the same ID but then the following message appeared "The vendor account is not associated with the file you are trying to open. Please try again." . Can this be fixed somehow? I cannot open the URLLinks even as there is no connection from my IP , but I have the pdf file ( ebook) but I don't know how to set up the program.

Sorry Everyone this error message appeared in Digital Editions 4 used on a windows 8 laptop. Thanks Chris

The MOF Compiler could not connect with the WMI server

I am trying to add node2 to SQL cluster (2008) However, I kept running into errors with the following error message:
"The MOF Compiler could not connect with the WMI Server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI Server to start".
I checked on the WMI services, they are started and running.renamed the WMI repository. but nothing worked .
Any idea what settings I need to change in order to ensure a successful instalation and add node 2 to sql cluster.

Hi,
Did SQL Server failed during installation and you somehow brought services online. Or it failed and next time you executed it succeeded IMO this error pops up because of remnants of failed installation on Node 1. With cluster specially if Installation on
node 1 fails you should uninstall completely and remove all files related to SQL Server and then proceed.
Have a look at below connect,see workaround and information posted by MS
https://connect.microsoft.com/SQLServer/feedback/details/356258/the-mof-compiler-could-not-connect-with-the-wmi-server
If above still not helps please post complete setup log file
%Program files%\Microsoft sql server\100\Setup bootstrap\Log\ folder.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

Why are the application in the apple store are not compatible with the iPod touch 4g? Apple please realize there are some of us who still have the iPod touch 4g!

Why are the application in the apple store are not compatible with the iPod touch 4g? Apple please realize there are some of us who still have the iPod touch 4g! I just want to know.

Once I find the game i will truly screenshot that it states "not compatible for these models". I just find it RIDICULOUS that my iPod touch is in good condition and some of the applications that I want download sometimes are not compatible with my iPod touch 4g. I am not going to buy an ipod 5th generation if my 4g is still going strong since the year of 2010.

SQL 2012 installation Error-The MOF compiler could not connect with the WMI server

Hi all,
I am getting below error while installing SQL 2012 Dev edition in Win 8.1 Pro.
I am facing lot of issues while installing SQL 2012 in Win 8.1 Pro.Any other steps we need to take to install SQL 2012 in Win 8.1.
Thanks in advance.

Installation:
Installation for SQL Server 2012
Hardware and Software Requirements for Installing SQL Server 2012
Installing the .NET Framework 3.5 on Windows 8 or 8.1
About "The MOF compiler could not connected with the WMI server" error message:
Please, verify the Windows Management Instrumentation has status "started" and is set with Startup Type "Automatic". (Alberto Morillo, SQLCoffee.com).
José Diz Belo Horizonte, MG - Brasil

Hierarchies Job Failing The job process could not communicate with the dat

Hi Experts,
We have a group of hierarchies that run as a separate job on the DS schedules. The problem is this when we schedule the job to run during the production loads it fails but when we run immediately after it fails it runs completely fine. So it basically means that if i run it manually it runs but when its scheduled to run with the production job it fails. Now the interesting thing is If i schedule the job to run anytime after or before the production jobs are done. It works fine.
The error i get is
The job process could not communicate with the data flow <XXXXXX> process. For details, see previously logged
                                                           error <50406>.
Now this XXXXX DF has only Horizontal Flatenning and it does not run as separate process because if i have it has separate process it fails with an EOF . So i removed the run as separate process and changes the DF to use in memory .
Any Suggestion on this problem...

Thanks Mike.. I was hoping its a memory issue but the thing i don't understand is when the job is scheduled to run with the production job it fails. when i manually run the job during the production job it runs, this kinda baffles me.
DS 3.2 (Verison 12.2.0.0)
OS: GNU/LINUX
DF Cache Setting :- In Memory
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 26
model name      : Intel(R) Xeon(R) CPU           X5670 @ 2.93GHz
stepping        : 4
cpu MHz         : 2933.437
cache size      : 12288 KB
fpu             : yes
fpu_exception   : yes
cpuid level     : 11
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss syscall nx rdtscp lm constant_tsc ida nonstop_tsc arat pni ssse3 cx16 sse4_1 sse4_2 popcnt lahf_lm
bogomips        : 5866.87
clflush size    : 64
cache_alignment : 64
address sizes   : 40 bits physical, 48 bits virtual
power management: [8]
processor       : 1
vendor_id       : GenuineIntel
cpu family      : 6
model           : 26
model name      : Intel(R) Xeon(R) CPU           X5670 @ 2.93GHz
stepping        : 4
cpu MHz         : 2933.437
cache size      : 12288 KB
fpu             : yes
fpu_exception   : yes
cpuid level     : 11
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss syscall nx rdtscp lm constant_tsc ida nonstop_tsc arat pni ssse3 cx16 sse4_1 sse4_2 popcnt lahf_lm
bogomips        : 5866.87
clflush size    : 64
cache_alignment : 64
address sizes   : 40 bits physical, 48 bits virtual
power management: [8]
Thanks for your help

I have been trying to update my cc info and for some reason it has kept saying that the cc info does not match with the bank so the transcation failed every time I was trying to download something even when it's free but my cc got charged $1.- each time.

I have been trying to update my cc info but for some reason it has kept saying the cc info did not match with the bank info so the transaction failed every time I made an attempt to download something even it was free. However, I saw my cc online got charged $1.00 everything I was trying to update my cc info ...why?

Im wondering why my post hasn't been answered yet. I did file a report with the BBB and I had a rude representative from Verizon call me named Steve. He said I can file all of the reports I want and I will just keep getting calls from him. I can understand why my phone couldn't be replaced because of the small crack. I guess I have to eat that one (but it sucks because the lollipop update is what caused the problems) but what about all of the data overage I had to pay for for trying to fix this phone because of a lollipop update. I dont think it is fair to have to pay that as well. In addition, because I have an east coast phone number but live on the west coast, I cannot have tech support after 8pm. Verizon has cut this off. Im very dissatisfied and I have been a customer of Verizon for 13 years. Im hoping for a response this time.

I can't open my digital book. Mis180 They said that the vendor account is not associated with the it

I can't open my digital book. Mis180 They said that the vendor account is not associated with the item I am trying to open.

This is the Reader forum. The Digital Editions one is here:
http://forums.adobe.com/community/adobe_digital_editions

Is the new maverick download not possible with the version lion?

Is the new maverick download not possible with the version lion?
My version is:
Mac OS X Lion 10.7.5

Should be, you can compatibility here:
http://support.apple.com/kb/HT5842

My brother have given me his I-phone3, But he lives in US, he has given his phone in India, The sim card is not working with the phone. What should I need to do.?

My brother have given me his I-phone3 But he lives in US he has given his phone in India The sim card is not working with the phone What should+I need to do?

Send it back to him and have him unlock the phone for you so you can use it with your carrier.

Reading the EDI X12 file not working with the patch 8233048

Hi
I have installed the latest path 8233048 on my windowsXP system, now I am not able to see the File being polled and processed.
In b2b.log I can see the last message as "oracle.tip.adapter.b2b.data.MsgListener:run start listening on message" after that no log.
In b2b_dc_transport.log, I can see only
2009.02.07 at 20:35:45:236: B2BStarter thread: (DEBUG) TransportProperties.TransportProperties():http.receiver.registry_port=5110;smtp.receiver.protocol=imap;PROTOCOL_ENDPOINT=null;file.receiver.polling_interval=30;polling_interval=30;http.receiver.instance_name=IP;
2009.02.07 at 20:35:45:266: B2BStarter thread: (DEBUG) initialize TransportReceiver: [IRIS_Transport_Server < file > < IRIS >]
2009.02.07 at 20:35:45:266: B2BStarter thread: (DEBUG) FileReceiver.init() started ....
2009.02.07 at 20:35:45:287: B2BStarter thread: (DEBUG) FileReceiver.init() completed.
Could you please tell me if I need to do any changes.
This is working on b2b with only patch: 5907304 which is installed in another windows XP system.
The same configuration with the latest patch is not working.
Edited by: Praveena Paruchuru on Mar 7, 2009 7:56 AM

Hi Dheeraj,
I have restarted my system many times, not only B2B.
I have taken the print out of both the tip.properties and compared line by line and wanted to check out which line was making it not to function.
I added the mismatching lines one by one by one, it was working for all teh updates. Finally I changed it to my new tip.properties.
Then surprisingly it is working.

The disk configuration is not insync with the in-memory configuration. Software RAID 1 reactivation

Similar Messages

Maybe you are looking for