The disk drive won't spit the cd out of the drive? What do i do?

I was watching a movie and ejected the movie and it wouldn't come out. It sounds like tries then it dies. It does this for about four to five times; and it does this everytime i open or turn on my computer. What can i do, if there is anything i can do without buying aa new disk drive.

Welcome to Apple Support Communities
Have you closed the app you were using to watch the DVD?
If so, hold down the trackpad (or hold its left button) while your MacBook is starting. This will force the SuperDrive to eject the DVD.
If it doesn't work, hold Command and S keys while your Mac is starting to start up in single-user mode, and type:
drutil eject && exit
There are other methods, but they won't work if these ones didn't do the trick. In this case, take the computer to an Apple Store or reseller to get your disc drive replaced, or get an external DVD drive

Similar Messages

  • I am not able to delete or write my files to my external hard disk drive what shall i do?

    i am teja i brought a new mac book air here i am not able to write or delete the files that are present in a external hard disk drive what shall i do now to enable required permisions................plz reply me i am new to mac

    I guess your external drive is Windows (NTFS) formattet.
    By default you were only able to read from that drive, as Mac doesent support NTFS write.
    If you want to have read/write access to a NTFS volume you have to use add-in tools like MacFuse or Paragon on your Mac.
    Not having write or delete permissions on the external drive may also preventyou from changing existing files on that drive.
    Right click on the drive in Finder and choose "Information" from the menu will give you more information about the reasons of your problem.
    Lupunus

  • If something small got stuck in your disk drive what steps do you take to remove it?

    if something small got stuck in your disk drive what steps do you take to remove it?

    Depending on the model of Mac I would first try to tilt the unit to see if you can get whatever you got stuck in there nearer the edge. Do not shake the Mac to move the object - you could cause damage to internal components.
    The next best thing is to use a very fine pair of tweezers or pliers and try to remove the object. Sometimes a credit card or firm business card may also help you move the object nearer to the lip of the optical drive.
    Be warned though - you are not supposed to stick anything into the optical drive yourself to try and remove something as you could cause further damage. Your best bet is to take it into an Apple Store and have them remove it. Just as another warning though - this would count as accidental damage and so is not covered under your Applecare if you have it. You'll have to pay out of pocket to get the object removed.
    Regards,

  • I have a hard disk drive with data that i want to back up onto another hard disk drive. I tried just copy and it won't let me paste it in the new drive. I have also tried to drag the files across and they won't go across. Does anyone know how to do this?

    I have an external hard disk drive with data that I want to back up onto another extrnal hard disk drive. I have tried to copy and paste but this wont give me a paste option. I have also tried to click and drag but it wont let me either. I have reformatted the external hard drive to accept both mac and pc files and this did not make any difference. Can anyone help me with this?

    How did you reformat the drive? If you formatted it as NTFS, your Mac will not be able to write files to it unless you use a small application such as Paragon's.
    Please reply as to how you formatted the drive.
    Clinton

  • When trying to install yosemite it won't let me select and disk drive including the hd for install. Whats the problem?

    While installing yosemite, after agreeing to the terms it ask for a disk drive to select for install. All of mine that come up say that yosemite cannot install to that one. This includes my HD. What is the problem?

    I subscribe to the "if it ain't broke don't fix it" and it currently works fine with 10.9.5, or it works fine as my start up disk presently.
    The reason I suspect FDE is the culprit is from reading this:
    http://fairerplatform.com/2014/06/can-mac-run-os-x-10-10-yosemite/
    and in the known issues for installation it mentions "may be unable to install over an encrypted volume" and while this is from an older version, I'm going to hold off now until I've seen that 'Known issue' resolved. I'm having trouble finding a copy of the current release notes.
    This account of installing Yosemite seems to have hit a number of the Known Issues:
    http://onword.co/6642/
    My FDE linux installations know how to upgrade themselves on a full disk encrypted systems. I'm a little disappointed this is an issue at all, and am going to wait. It's not worth the risk of bricking this machine.

  • After upgrade to mavericks: time machine keeps asking for my back up disk and won't open unless i plug in the disk. any solutions?

    after upgrade to mavericks: time machine keeps asking for my back up disk and won't open unless i plug in the disk. any solutions?
    before the upgrade, i could open time machine without the need for having the back up disk plugged in.

    Ok. I got it to work, sort of....
    As I mentioned before I tried the "disk password" and the "Time capsule Password" options to see if I can start the back up again or start a new backup. Neither worked. So I tried the firmware down grade, but like you said that did not work. I then decided to try the "Account password" option and I have never used this option before becasue it states that if there is data on the drive it would not be acessable after creating an account. Since I wiped out the disk that was nno problem. When I created the new account and choose the drive it asked for the user name and password. I entered the info for the new account I just created(FYI this has nothing to do with your login username and password), bingo! It worked!
    Now I have two partitions on the TC disk. The old one and now the new account. I am guessing this is to be used if I have multiple computers, which I don't.
    I any case, I am going to wipe out everything again and try again to do a backup the way I had it before.

  • I bought the disk Photoshop CS6 extended how do I install it on an new comp with no disk drive?

    I bought Adobe Photoshop CS6 and installed the disk on my old computer. How do I install the program onto my new computer since I do not have a disk drive to put the cd into? There is nothing on the website that I can find to help me....I really enjoy the program and didnt even realize I didnt have a disk drive in this computer....(I know its something I should have known before I bought the computer....but it slipped my mind till now when I actually need it.) Thank you....Heidi

    Hi Heidi,
    Welcome to the Community!
    That's not a problem, you can certainly download the product online. Please go to http://prodesigntools.com/adobe-cs6-direct-download-links.html and download Photoshop CS6 from there.
    Remeber to follow the instructions mentioned under "Very Important section" otherwise download won't start.
    Thanks!
    Ankit

  • Hi there! yesterday I installed Mavericks on my Macbook. Since then, it doesn't mount my external hard disk drive anymore, which he did a week ago (without the update). Is there anyone out there who knows a solution?

    Hi there! Yesterday, I installed Mavericks on my Macbook. Since then, it doesn't recognize my external hard disk drive anymore (at least not on the desktop. In Germany they call it "it doens't mount it". I don't know if it's the same expression in english?)
    I just used it a week ago, before I did the update and it worked perfectly fine.
    Is there anyone out there who knows a solution for this problem? I've been googleing for hours now and can't find any answer.
    Thank you!!!

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • My disk drive won't accept disks at all, not even a little to spit them out.

    My disk drive will not accept disks at all...there is no disk stuck in there, but nothing happens when I try to insert a disk into my disk drive.
    The disk won't even go in the drive a little bit...it's like something is blocking the drive, but I know nothing is in there.
    Any ideas on what this may be or what to do to correct it?

    It sounds like the lens on your optical drive is dirty. Use a cleaning DVD or wrap a microfiber cloth around a credit card and carefully slide it in and out a few times.

  • I have lightroom.  My photos are stored on an external disk drive with a backup disk.  With iCloud, will all of my photos go to the cloud?  Will I still need the external drives? Is the $9.99 per month for just one year or for always?

    I am an amateur photographer and have lightroom.  My photos are stored on an external disk drive with a backup disk.  With iCloud, will all of my photos go to the cloud?  Will I still need the external drives? Is the $9.99 per month for just one year or for always? 

    If the iTunes database files are on that drive, launch iTunes with the Shift key(Windows) or Option key(Mac OS X) held down, select Choose Library, and navigate to it. The computer may need to be authorized to play protected content, and if the library contains rented movies, those won't play.
    If not, import the content to an iTunes library.
    (100371)

  • The disk drive in my ibook g3 is broken, is it possible to disable the drive so i can use an external superdrive instead?

    the disk drive doesn't load up what ever is put into it and i am unable to fix it or replace it
    when i plug in a superdrive into the usb port it won't work because the disk drive still takes precedence
    is there any way to disable the drive so i can use my superdrive instead?
    thanks,
    matt

    For removal or replacement you can see how to do it with an iFixIt manual. Go to the link nd pick your model then look up optical drive.
    http://www.ifixit.com/Device/iBook_G3

  • Regarding the product time capsule...is the modem the same as airport extreme and is the disk drive always running? I'm worried about it lasting for at least five years.

    Regarding the product Time Capsule... is the modem the same as the Airport extreme and is the disk drive always running??? I'm worried about it lasting at least five years.

    John,
    I'd pay good money to bet it wouldn't last 5 years... I don't rate the in built power supply and as for "server grade hard disk" - Hmmmm..... The failure rate of all HD's on the market after 3 year is 60%.
    Regards,
    Shawn

  • I have an iPad 2 and iPhone 4 and for them I use I cloud I have also 1 pc windows and at work place I use windows pc ; until now my files are stored on an external disk drive could' I use iCloud to perform the backup of my external disk drive ? Thanks

    I have an iPad 2 and iPhone 4 and for them I use I cloud I have also 1 pc windows and at work place I use windows pc ; until now my files are stored on an external disk drive could' I use iCloud to perform the backup of my external disk drive ? Thanks
    Loredano

    These are the options you have.
    Budget $1299.
    http://www.apple.com/macbookair/
    http://www.apple.com/macbookpro/
    Best.

  • I have 2 auxillary disk drives for my MacBokk Pro. Time Machine uses one for backup and I use the other for storage, but I am unable to create a new folder or drag and drop files or folders to the aux drive.

    I am unable to create a new folder on either of my auxillary disk drives.  I can access the files and folders that were there when I transferred one of the drives from a PC.  Time machine uses one for backup and I want to use the other to store photos which are large files.  An help would be appreciated.

    Thanks for the reply.  If I reformat the drive will I be able to access the files on it from the MAC.  I do not share the drive with a PC.  The files were originally created on a PC which I no longer use.  I do want to continue to access the files put there by the PC.  I would like to not have to copy them over to the MAC hard drive just to use them.  The second aux drive is new and works fine because it was formatted by the MAC.  I can drag and drop files there and work with just as if they were on the internal drive.

  • TS5376 For "The program can't start because MSVCR80.dll is missing from your computer", I followed the steps and there is no C:\Program Files\iTunes and look for .dll files..Also, after the update, I no longer show my disk drive when I load a CD.

    After downloading the new Itunes update, my compter now shows error: "The program can't start because MSVCR80.dll is missing from your computer". I follwed the Apple fix / steps but it did not correct it. Also, after the update my disk drive is not recognized on my computer. If I load a CD, I cannot even access it.

    See also Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes (similar to the advice above) and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies. E.g. TS2308: iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

Maybe you are looking for

  • I have created numerous forms in Designer and for some reason, "Edit in Designer" from PDF, I cannot edit any of the fields in Design View.

    I have created numerous forms in Designer and for some reason, "Edit in Designer" from PDF, I cannot edit any of the fields in Design View.

  • Problem with my 3G

    Hi all i have a BIG problem with my iphone 3g i can't work the notification i try every thing (update-reset-formate.....etc) and nothing worked all i have when i enter any app. is this alert http://img59.imageshack.us/img59/6497/img0070p.png i really

  • ClassNotFound when deploying JPF app on Apache Tomcat

    I have a very simple two page JPF application in BEA WL Workshop called Test1Web within project JohnTest1. I created an EAR file for it in another directory, and try to install the Test1Web application on Apache Tomcat/4.1.12-LE-jdk14. Apache failed

  • Preparing Backup-for two days

    I have time machine on a partition on a 750 gb firewire drive. Had not problems prior to a few days ago,when it seemed to quit working. I erased everything on the partition, and started Time Machine fresh. Its now been "preparing backup" for two days

  • Cant open PDF's after being burned to a CD

    I have an issue where a user is buring pdf files to a CD and when they try to open them is gives and error of not supported or currupt file. The weird thiing is that she can give it to another user and they can open it fine. Also if she burins anothe