The disk is not readable

Hi everyone, I store a lot of my stuff on my external hard drive. However this morning it wouldn't mount. Instead I got this message
The same message pops up if I try connecting it to other computers. If i open Disk Utility it looks like this
If anyone knows what I need to do, please tell me. I have a lot of very important files on it that are not backed up, since I recently lost my back up disk.
Thank you, I'm desperate, Sebastian
Mac Book Pro Mac OS X (10.4.9)

DiskWarrior usually has a better chance of fixing such problems. But no guarantee, and it will cost you about $80 to find out. When DW works, it's absolute magic, because it just fixes things back to the way they were. And for some reason, it is able to fix things that Apple's free DiskUtility can't:
http://www.alsoft.com/DiskWarrior/
Data Rescue II from ProSoft has a good chance of recovering important files if the disk can't be repaired:
http://www.prosofteng.com/
You can download a demo version that can show you what files can be recovered. Then pay and register to actually complete the recovery.
You have to have room on another hard disk to put the files you recover with Data Rescue.

Similar Messages

When insert my lexar USB flash drive I get the message that the disk was not readable by this computer. It has worked previous to this and I do not want to lose the data by reformatting the drive. How can I reformat this drive and not lose my data?

When insert my lexar USB flash drive I get the message that the disk was not readable by this computer. It has worked previous to this and I do not want to lose the data by reformatting the drive. How can I reformat this drive and not lose my data?

You can't reformat it and not wipe everything on it.
Have you tried a different USB port?
Only other option, back it up on a different computer.

External hard drive says the disk is not readable by this computer. Help!

My son disconnected my external hard drive while I was copying files from my macbook to the external hard drive. Now it says the disk is not readable by this computer. Help! Is there anything I can do??

Launch disk utility and try to repair the disk, http://support.apple.com/kb/HT1782?viewlocale=en_US&locale=en_US

The iPad "My iPad" cannot be synced. The disk could not be read from or written to.

Since updating iTunes to 10.5 (running on OS X 10.6.8) I get this error message at the end of syncing for 2 different iPhones and an iPad 2:
The iPad "My iPad" cannot be synced. The disk could not be read from or written to.
Everything was fine before, and the sync seems to still be happening. The disk is actually readable and writable, and not full. The ~/Library/Application Support/MobileSync/Backup folder write date is getting updated.
The system log says:
Oct 28 21:29:45 Home-Mac iTunesHelper[399]: _AMDDeviceAttachedCallbackv3 (thread 0x7fff70182cc0): Device 'AMDevice 0x10022aa60 {UDID = 1a75e9685b623865acad0792f078ac9000608044, device ID = 4, location ID = 0xfa400000, product ID = 0x129f}' attached.
Oct 28 21:29:45 Home-Mac iTunes[396]: _AMDDeviceAttachedCallbackv3 (thread 0xb0839000): Device 'AMDevice 0x3340390 {UDID = 1a75e9685b623865acad0792f078ac9000608044, device ID = 4, location ID = 0xfa400000, product ID = 0x129f}' attached.
Oct 28 21:30:05 Home-Mac [0x0-0x35035].com.apple.iTunes[396]: 2011-10-28 21:30:05.557 AppleMobileBackup[6494:903] WARNING: Backing up 1a75e9685b623865acad0792f078ac9000608044
Oct 28 21:31:52 Home-Mac [0x0-0x35035].com.apple.iTunes[396]: Child with pid 6494 exited normally
Oct 28 21:54:37 Home-Mac [0x0-0x35035].com.apple.iTunes[396]: Waiter has started running...
Oct 28 21:54:37 Home-Mac [0x0-0x35035].com.apple.iTunes[396]: Waiter is done running
Oct 28 22:26:11 Home-Mac [0x0-0x35035].com.apple.iTunes[396]: Waiter has started running...
Oct 28 22:26:11 Home-Mac [0x0-0x35035].com.apple.iTunes[396]: Waiter is done running
Oct 28 22:26:11 Home-Mac [0x0-0x35035].com.apple.iTunes[396]: Child with pid 6668 exited normally
Is this anything to worry about?
--Scott

I am having the same problem with an older black and white 40 gig ipod. I had a new hard drive installed and using my Power Mac G5 running 10.4.9, where I keep the music library, I am unable to install more than 2 gigs of music. I have done the restore and it does not help. I get the same error message everytime. I was successful in syncing a new 80 gig minutes later!
Any suggestions?

G4, 400Mhz, OS X, (10.4.6) Disk insertion not readable messsage.

I've installed an internal secondary hard drive, 120GB, Barracuda 7200 RPM to my G4 which contains a 10GB hard drive as master drive. I'm trying to install a second hard drive as a slave but I keep getting a Disk insertion not readable message. The computer recognizes the new HD but won't initailize. I tried swapping jumper location but to no avail. I'm at my wits end, please help.

That is an older G4... and Disk Utility launches, you try to use the Erase or Partition and it fails?
Master should be on the end of the IDE chain, as well as jumpered as master or even "master with slave."
Try booting from Tiger DVD with just the 120 GB drive, and set as master or master only. See if you can do it that way. Or just boot from DVD first and see if it will let you. Sometimes works.
Also, you could try setting both drives to Cable Select and see.
10GB was/is small and slow, you should see a real nice boost. If you want to add more drives, consider SATA and then you can use larger and faster drives.

IPod Error Message: "The disk could not be read from or written to."

Hello!
I was syncing my sister's video iPod (30GB) and this error message pops up "Attempting to copy to the disk. "SARAH'S IPO" failed. The disk could not be read from or written to."
I have restored it three times already, but once it starts putting the music and files back onto the iPod it pops up with that error message. I have updated to the latest version of iTunes and iPod software available. My OS is Windows XP.
Is this something serious? Will I be able to fix it myself or will I need to send it in to be fixed by Apple? Will that be expensive? We didn’t get the Apple replacement plan. D=
Any help would be greatly appreciated. Thank you in advance. ^_^
PowerBook G4 Mac OS X (10.4.3) 15" PowerBook 1.5 GHz PowerPC G4, 1.5GB RAM - Windows XP with iPod 5 Generation

Okay I went thru that entire list and here's what I got...
(1) My OS is XP and is running fine.
(2) I've updated my windows
(3) I don't know of any software that might be interfering.
(4) There are no damaged files.
(5) My Windows hard-drive is not damaged and I've tried restoring my iPod's disk thru iTunes but it still doesn't work.
(6) I don't have an iPod photo and I can't find the folder to delete the cache if if I did.
(7) The USB cord is firmly connected into my USB port and my iPod
(8) My music is on my external hard-drive so I need to keep 3rd-party hardware connected
(9) I will try another USB cord to see if that works.
Is there anything else that I can do? Can Apple fix this?
Please let me know.

"The disk could not be read from or written to"??

When I try to sync my ipod it gives me following error message "Attempting to copy to the disk 'My Ipod' failed. The disk could not be read from or written to."
Have not reset or restored it yet, wondering if there is anything I can do that doesn't involve me deleting all the songs on my ipod.
5th Gen 80g Ipod, G5 Imac Mac OS X (10.4.9)

See if this troubleshooting article helps.
Disk cannot be read from or written to error syncing iPod in iTunes.

Attempting to copy to the disk Ipod failed. the disk could not be read from

Keep getting error message Attempting to copy to the disk.....Ipod failed. The disk could not be read from or written to. I can copy to Ipod from my laptop however, can not sync with my G-4 tower. I keep my library on an external HD Lacie d2. I've tried all the possibilities from the support page to no avail.. Need help... When error refers to disk is it referring to my external HD

Hi c2xist,
And you did follow all of the suggestions from this article?:
"Disk cannot be read from or written to" when syncing iPod
Also, you could go through these iPod troubleshooting steps, and see if they are of any help:
The Five Rs
-Kylene

9.1.1 sync problems: "The disk could not be read from or written to."

Using OSX 10.6.3 and upgraded to iTunes 9.1.1. Once I did, I keep getting the following error message: "Attempting to copy to the disk [my ipod] failed. The disk could not be read from or written to." This is followed by another error message: "iTunes could not copy {name of file} to the iPod {iPod name} because the file could not be read or written."
I tried deleting the files mentioned in the error message, but then the message returns with the name of a different file. At this rate, I'll be deleting all my files!
I tried checking everything on the Knowledge Base article: http://support.apple.com/kb/HT1207
I tried restoring my iPod (twice), but it didn't help.
All my software is up to date. I haven't added any new software since I upgraded iTunes.
NOW...when I try to sync my iPhone, I get the same error message.
What's going on, and can anyone help?
This is very annoying since I can't sync my iPhone which I need or my iPod which I would like.

ArizonaDAK wrote:
"iTunes could not copy {name of file} to the iPod {iPod name} because the file could not be read or written."
check if you have read & write permissions for your iTunes music folder. in finder, right-click on it and +get info+. unlock the little padlock (you may have to enter your admin password) and change the permission settings. next, click on the little gear-shaped icon and +apply to enclosed items+ like so
you may also give everyone read & write access. if this doesn't help, try the same on your iTunes folder (not just the iTunes music folder).
if that make no difference, try reinstalling iTunes. click here and follow the instructions. next, download a fresh copy from here: http://www.apple.com/itunes/download/.
you might also try to _*remove and reinstall the Apple Mobile Device Service*_
JGG
edited by the Jolly Green Giant (where Green stands for environmentally friendly)

IPod cannot be synced. The disk could not be read or written to.

I have...
G5 ipod video 30Gb formated to PC
iBook G3 600MHz
iTunes 7.1 (59)
iPhoto 4.03
I use my ipod to contain all my videos, photos and music manually and nothing stored on the iBook itself, as it only has a small hard drive. I have a large amount of photos that I have in iphoto (a total of 3254 photos and 60 folders!) which I am using whilst travelling the world. I have recently started syncing photos to the ipod as a backup, also adding a copy of full res photos. This syncs fine and I have all photos on my ipod, but when I add more photos to iphoto and then plug in the ipod it will start to sync though itunes, but then will come up with an error stating "The ipod "NAME OF IPOD" cannot be synced. The disk could not be read from or written to."
The ipod still has all the photos it originally had, but not the new ones.
I have tried deleting the file that is in the library that contains the information file, this forces the ipod to re sync and start all over again with adding the photos, which it will add the new photos, but the probelm will happen again as soon as more photos are added through iphoto!
Can anyone give any advice, I really can't format the ipod and start over agaian as I will lose all my music etc and I don't have enough room to store them elsewhere!!!
Please any help please! I really need to back these files up incase something goes wrong with the computer, then I will lose all my pictures!
Help!
Thanks
Rob

Hi Rob!
First off, it might be worth upgrading to the latest iTunes version, which is 7.1(15) (or at least I think that's what it is on a Mac... for Windows, it's 7.1.1.5).
Regardless, you can install the latest version of iTunes here:
Download iTunes - 7.1.1.5
Also, if that doesn't seem to help with anything, have you seen the suggestions in this article?:
"Disk cannot be read from or written to" when syncing iPod
-Kylene

Error when syncing iPod: The disk could not be read from or written to!!

I have an iPod mini which worked fine on my Windows XP.
Recently got Windows Vista and I downloaded iTunes and my put my music in the library.
When I plugged my iPod into the Vista, it said it was syncing all the songs to my iPod.
After about 3 hours, whilst syncing the last song a notice came up saying, 'Attempting to copy to the disk failed. The disk could not be read from or written to.'
I restored my iPod and reinstalled iTunes but the same thing happend.
I decided to plug my iPod back into the Windows XP, where I've had no problems. When I did this and started snycing all the songs, I got the notice come up again.
'Attempting to copy to the disk failed. The disk could not be read from or written to.'
I haven't been able to use my iPod now for about 5 weeks because I cannot solve the problem so any help will be much appreciated!
Thanks

You have posted in the Mac forum for problems & questions usting the iTunes store. You will probably find more help in the following forum.
http://discussions.apple.com/forum.jspa?forumID=800

The ipod cannot be updated. The disk could not be read from.

The ipod cannot be updated. The disk could not be read from or written to.
This message appears every time I try and update my ipod or put photos on. I also get this message:
An error occured while updating the default player for audio file types. You do not have enough access privileges for this operation.
WHAT DO I DO???????

Perhaps check for corrupted files--I had this issue with a messed up track/ file, and that kept killing the sync. More here:
Lost in Asia, "Disk Could Not Be Read From or Written To." #12, 03:32am Oct 15, 2005 CDT
As for the access privileges part, well, sorry, I have absolutely no idea what that means.
Good luck!

Can't sync to iPod: The disk could not be read from or written to.

I recently installed a new operating system (Windows XP with service pack 2), and then downloaded the latest version of iTunes. The next time I hooked up my iPod (3rd gen.)to sync it, iTunes removed all of the music that I'd purchased on iTunes, and i was unable to sync it back on. Then every time I opened iTunes to try again, my computer would freeze (but only when on iTunes). I used the restore function to restore factory settings, so now there is nothing at all on my iPod and when I try to sync, it gives the above message (The iPod cannot by synced. The disk could not be read from or written to). Any suggestions for how I can fix this problem?
Thanks!

Have you had a chance to look at this troubleshooting page? It may be of some help: "Disk cannot be read from or written to" when syncing iPod

Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB hard drive and only 120GB Macbook. It worked fine before the latest Maverick's

Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB external hard drive and only 120GB Macbook. It worked fine before the latest Maverick's update. Any help would be greatly appreciated.

My guess would be it has created an entirely new backup of your drive when you upgraded to Mavericks.
See Here: http://pondini.org/TM/1.html
And here: http://pondini.org/TM/9.html
Peruse the whole site. There is a lot of information there.

How do i redeem an itunes giftcard code if the code is not readable?

how do i redeem an itunes giftcard code if the code is not readable when scratched off??

Yes, i scratched it and some of the numbers came off with it. is the card no good now?

The disk is not readable

Similar Messages

Maybe you are looking for