The disk won't eject after Time Machine backup

Each time im doing a time machine backup, the external drive does not eject, the icon becomes pale, but remains on the desktop. But when I did not just make a backup I can eject it normaly.
My disc contains two partitions, one with the backups. When my problem occurs the first partition is ejected but not the Time Machine one.
I tried to reformat the partition but the problem persists.
My hard drive is a GDrive mobile usb 1 TO purchased at the apple store.
Did someone has a solution?
Thank you !
PS; sorry for my bad english

Actually i found a potential solution, in majority of time it solved my problem, but some times (less frequently then before) it doesn't work And the disk still not eject. In the timemachine Settings, did the principal switch button is on "yes" or "no" ?
I was backing up manually, and I had put the switch to NO, and i think that was what cause the problem... When I Switched to YES, my disk ejected correctly for 95 % of time.
Try to turn this switch ON , if she is OFF.
I dont think that the problem is the age of the drive, mine is a 2014 one and i had this problem too.

Similar Messages

Macbook won't boot after time machine backup

I installed a program on my Mac that was causing some problems so I decided to do a time machine restore. I booted into recovery mode, selected restore from time machine backup and let it run. It finished completely but it gets stuck at the startup screen. I get halfway on the loading bar and it does not progress past there. I've waited up to an hour.
I am running Yosemite on a mid 2009 macbook. I am using a SSD and I know with trim enabled it sometimes won't boot up but I disabled it via terminal.
I've also ran disk utility on my HD and on my external HD. I'm getting no errors on both.
Anyone have any ideas?

If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
*The linked support article refers to OS X 10.10 ("Yosemite"), but the procedure is the same for OS X 10.7 ("Lion") and later.

Imac won't restore from time machine backup after HD (hard drive) recall replacement

I have an imac bought in 2011, running Snow Leopard. It required an HD replacement due to the 1 TB Seagate recall - the replacement was done by a certified Apple repair station yesterday. Before the guy left he started a backup/restore from my latest time machine backup set. It failed. I attempted it two times and got error messages that it failed and the computer needed to be restarted to try it again. No luck. I called the guy back and he told me to call Apple Care. Not thrilled about that response since the guy had just left my house I did what he told me to do. (A quick sideline here: I recognize that a time machine backup should be no big deal and SHOULD work everytime, but it doesn't. It irks me that Apple is replacing my HD through no fault of mine and yet they don't allow the restore of data to be a "covered" expense in this process - this isn't just because this was an authorized repair guy - the Apple store would have done the same).
Back to the issue. When I called apple care they pretty much had me try the same thing again with an earlier back up set. To my knowledge, it didn't work. I say this because it looked like it was working and when I came back to the imac later, it had restarted and once again booted to the OSX install. (The boot disc is still in the imac). When I tried to boot from another location, one did not show up to boot from so I assumed that the data didn't transfer and it forced another restart. So, I tried something else. I tried to re-install the snow leopard OSX without using the restore function. That appeared to work and then when the machine restarted it asked if I had another mac and I chose the option to get the files/apps/etc. from my time machine backup. The computer chose what I can only assume is the most recent backup set (It chose what I know to be a subfolder that appears under the dated backup folder - Macintosh HD--which btw is confusing seeing as that's always the name of the HD on the imac). I again stepped away from the computer so it could do its thing for two hours. When I returned, I was back to the MAC OSX screen that asks you to choose a language. There were no more options to choose DISK UTILITY or RESTORE FROM BACKUP, etc. When I clicked on English it took me right back into the screen where you say whether you have another Apple that you want to transfer data from. I realized that the imac must have restarted and I assumed maybe it was because the boot disk was still in - except how do you get the disc to eject? I also initially assumed that the backup had somehow failed again and triggered a restart. I tried to choose the option to just set up the machine without transferring data and when I got to the choose a name for your HOME folder message I tried to enter the same name I had it as before and it wouldn't allow me to do so, saying that that name was already in use. I also tried a different name and that didn't work either - got the same message (I assume if it is not the same name that it won't sync up with the time machine data from the backup set). So, I almost tried the "select time machine backup" option again until I looked at my HD space. Clearly, there is space that has been used. HD space was 997 at the start and now it's 636. My initial thought is to somehow get back into the setup area where I can use disc utility and erase the whole thing and then start over but 1) I don't think it's going to work even if I could get back there 2) I have no idea how to get this thing to reboot into that mode 3) I can't get the boot CD out to even try to restart to see if this thing did what it was supposed to, SO NOW I AM TOTALLY STUCK! I have not called Apple Care back because quite frankly they were useless the first time. I have a call into the repair guy but who knows how much help he will be. In the mean time, I have a million things to do and a computer that isn't working - Whoever said Apples never have issues needs to be seriously censored!
A few other notes: I use Time Machine Editor to run my backups weekly. It was set up that way from the get go by an Apple rep who came to my house to get us up and running. Editor should not effect the way that time machine does its work, so I doubt there is relevance but thought it worth mentioning.
One other note is that the Apple Care agent tried to have me do something called a "Source" something or other from the disk utility screen but when she realized that my backup file (shown by date) contained many other sub files (11-27-12/MacintoshHD/MyNamesIMAC/etc.), it was not possible to run this operation - thus we aborted. Sorry I don't remember the name of the process and unfortunately now can't access that option to go find it.
If you can help me, I would be eternally grateful! I am open to having a phone conversation if you are willing to give me your email to mail you my number. I have so much work to do this week and this was the last thing I needed. Did I mention this was supposed to be EASY?
I used to be quite the geek with my PC - still on the learning curve with the mac but not enjoying it. I am fairly tech savvy and I can follow instructions for a step by step solution if you've got one.

I got a recall and had the drive replaced. I have retored 3 timesa dn even had apple do the job and it is still not right. I still can't get a simple ghost of the data from time machineback tot he new drive.
This is Apple's explaination as taken from their web page.:
Restoring your entire system from a backup
If you are restoring a backup made by a Mac to the same Mac
With your backup drive connected, start up your Mac from the Recovery system (Command-R at startup) or Mac OS X v10.6 installation disc. Then use the "Restore From Time Machine Backup" utility.
Note: If "You can't restore this backup because it was created by a different model of Mac" appears when restoring a backup that was made on a different Mac, follow the onscreen instructions.
I even posted this information on the community and apple removed it... because they don't like the:
Off-topic or non-technical posts
Non-constructive rants or complaints
But here is my experieince:
Take in 27iMac running 10.6.8, 5-7 days, what a joke, my boss will be happy to pay for a week without working. Finally get, "if you have TM back up, 3 days." Get machine back with 10.6.3, hit the R recovery, click TM back up, runs for 2 hours, reboots, looks great. Box up take back to office... update to install - OH NO, still running 10.6.3. Updates crash with no specific error on install, BUG PROBELM, nothing runs.
Call Apple... after hours, tells me to boot using 10.6.2 disk, wipe, reinstall OS, udate to 10.6.8, THEN do the restore. GREAT! Only thing 10.6.2 DVD won't read... now back on phone... take back to the store, Genius says, he'll ix it just like it was. PROMISES it'll be fixed.
Pick up next day, supposedly, booted to disk, wiped drive, reinstalled, updated to 10.6.8 and THEN did the RIGHT restore... Looks GREAT... apps run and 10.6.8 OS. Back to the office... NOT RUNNING right!!!... fonts messed up, drop box app needs new install, cocktail needs upgrade, Fetch not working, memorized paths gone... back ups locked out of permissions... ***!!
4 hours on phone with apple and still no rsolution - to missing "settings". Seems there are THREE WAYS TO RESTORE (according to apply tech)... Running MIGRATE ASSISTANT and being able to choose your files, including settings, "R" RESTORE after they load a new OS... or NOW WAITING for them to send me a bootable 10.6.3 disk and then boot from disk, w/o installing OS and doing a restore from TM. I think this is done via the disk Utilties application.
So now can't back up without doing a full 400 GB back up since permissons are screwed and possibly destroying any good back ups... can't work, like having hands tied behind back. WAITING for solution! Very upset!!!
I did my first restore just like they said and now an 10 days without proper machine. Just FYI. I thnk I am going to make the store do the tech work so I have somthing to fall back on.

Migration Assistant won't see my Time machine backup disk

Hi,
I've seen some other discussions but they apply to slightly different situations and turn out to be too complex for me to follow. My situation is this. My Dec 2008 Macbook running Lion just died. Not sure what the problem is but it seems to be the hardrive. It will take me a while to get it fixed and in the meantime I have a farly new mac mini running Lion.
I also have been making Time Machine backups to an external drive. I read that I could migrate content from a time machine backup and I connected the backup to my mac mini and launched Migration Assistan (MA), seleted the option to migrate from a Time Machine backup. MA is stuck trying to find my disk even though it shows up in Finder. This is the screen I'm talking about http://screencast.com/t/AC0OiVzxx
I'm hoping there is the equivalent of a little on/off switch that I'm not seeing and you can direct me too.
How can I get MA to see my Time Machine backup disk? Thanks for your help.

sorry, i don't know what else it could be then. if you have another external drive you can try doing a full system restore from the TM backups onto that drive and see if MA will recognize that drive and migrate from it. other than this there is always manual migration. slow and tedious but it can be done. see this link for help with that
http://discussions.apple.com/message.jspa?messageID=6185507

Just bought a Macbook Pro. I want a clean install so won't use a Time Machine backup but how can I install the software I bought from Apple Store? can I just delete it from the old machine that is going to someone else?

Just bought a Macbook Pro. I want a clean install so won't use a Time Machine backup but how can I install the software I bought from Apple Store? can I just delete it from the old machine that is going to someone else?

The ne
The new machine has Mavericks which is fine. And I will leave it as is. I don’t want anything from my old machine other than 2 apps that I will need on the new one. I want to be able to install those apps that I bought from the App Store onto my new computer. I assume Apple doesn’t want me to have the apps installed on 2 machines at the same time so I wonder if just uninstalling them from my old machine will release them for re-install on the new one.

No internet after time machine backup

I sit here on a new computer under a different user name from my old backup. I can't get internet on my old user name. I realized my internet was working fine when I logged into my old computer at the same time to see if it was an internet issue or a computer issue. I'd hate to have to transfer all of my old info from my old user name if there is an easy fix for this that I'm not seeing.
I've rebooted the modem several times, I've run disk utility, and run all of the maintenance scripts for ONYX. I haven't deleted any preferences and I guess that should be my next step.
What's odd is that my old user name gets literally 1kbps internet, the new user name gets 1.5mbps, the usual for my internet. I've turned off the old computer to see if maybe there was a conflict with that as well, but the issue still happens.

it's all the same as far as I can tell. No sharing, and I only use airport and one network.
I went ahead and deleted a bunch of the preferences in the users>library>prefs. It reset all of the network options, but the lag still exists.
One thing I forgot to mention was that on my first attempt at the time machine backup, it got hung up at the very end when it said "transferring network preferences". This makes me think the time machine backup has some corrupted file in the network prefs. I wish when I had made my second and successful attempt at the backup was that I unchecked the network prefs to be tranferred.
I opened up terminal to see if there's some extraneous process running, and there's a lot of stuff running and I can't really decifer if the root processes are supposed to be running or not.
Anyway, I'm giving up and just starting over on a new account. I've searched around the web, and this seems to not be an uncommon problem (no internet after time machine backup), and there's no apparent solution either.
At least I don't have to reinstall the programs, just move a bunch of stuff. It's a pretty odd bug and I hope Apple picks up on this one to fix.

Mac os x mountain lion The volume is already used for Time Machine backups

Hey
I downloaded the Mac OS X Mountain Lion and then I clicked on the hard disk and then was "The volume is already used for Time Machine backups.
Can you help me please

Well, this isn't a download window, it's an installer window. You need to select one of your hard drive volumes on which to install Lion.
Your computer's main drive apparently has been used by you for TM backups which is a first class "no no." See: OS X v10.6, OS X Lion- Cannot install Mac OS X v10.6 or later on a volume used by Time Machine for backups.

Do I need startup discs to upgrade hardware on MacBook Pro or can I restore the hard drive from from a Time Machine backup?

do I need startup discs to upgrade hardware on MacBook Pro or can I restore the hard drive from from a Time Machine backup?

Ok, well go and grab a small 2.5" hard drive enclosure so you can put the new drive in & temporarily use it like an external hard drive.
Download Carbon Copy Cloner or Super Duper and make a bootable clone of your current HDD on the new HDD.
Once that's done you can test the clone by booting from it. To do this hold Optioni while booting to select the external (new) drive. If everything looks ok, you can go ahead and swap over the HDD's.
So much easier.

Macbook pro won't restart after time machine install on new hard drive

I installed a new 500 GB HD on my 13-inch mid 2010 Macbook Pro (since the original crashed). I successfully connected to the Disk Utility via the internet connection and started recovery from a recent Time Machine backup....but, the computer will not restart. It's been stuck in the grey screen with the Apple logo and rotating status bar all night. I shut it down and restarted, but it won't go past the grey screen state. I can't find any answers on the Support Page. Help. Any one else have this issue? Should I have first installed the Lion OS X first and then restored from the Time Machine backup?
Also, wondering if all my programs (2011 ILife & IWork and Microsoft Office) will be reinstalled with the back up? (I can't find my installation disks for ILife and IWork :-()

Time machine is easy to set up and theoreticaly recover from. There have been reports of problems when a different disk or computer is used.
https://discussions.apple.com/search.jspa?peopleEnabled=true&userID=&containerTy pe=&container=&spotlight=true&q=time+machine
For future reference you may wish to learn about and use cloning of the HDD. I use both CCC and SD to do this and consider it to be the most reliable way to back up and recover.
Carbon Copy Cloner - Home
www.bombich.com/
SuperDuper!
www.shirt-pocket.com/SuperDuper/
added a good reference
http://Pondini.org/TM/Home.html

Latest 3TB Time Capsule disk offline after Time Machine backup

I just replaced my 3 year old 2TB Time Capsule with the latest 3TB Time Capsule. I also replaced both of my wireless network extender Airport Extremes with the latest model. The Time Capsule disk goes offline after a Time Machine backup. I have to reboot my Mid 2010 Mac (Yosemite 10.10.1) to get the disk back online, only to have it go offline again after the next Time Machine backup. I am not sure if the problem is with my new Time Capsule or if there is a problem with my iMac.

The fact that it is the Mac you are rebooting indicates the issue is the OS.
Are you using wireless or ethernet?
As you can see with a quick glance down this page.. and the last few pages.. the introduction of Yosemite has not been without issues.. network in particular has been poor.
I am keeping myself out of fray.. having introduced a test Yosemite machine which caused the network to go completely berserk I have left well alone.
But I am tracking the issues.. so far nothing much is known.. so I can only suggest a few things to try.
One user has just suggested turning off AFP in the system preferences.
the simple method: System Preferences, Sharing, File Sharing, Options button, un-check AFP.
SMB should still be checked.
You should be able to manually mount the TC in finder.
Use Go, Connect to Server.
SMB://10.0.1.1
(Thanks for the screenshot as that makes it much easier).
Finder should locate the network resource and mount it.. asking you the password.. please save that in the keychain so it doesn't forget.
Here is apple's list.
OS X Yosemite: Time Machine problems
It has not got anything close to locating the problem. But there are some things that may be important.. ie it can be several bugs in combo not just flick this switch and now everything works.

Imac won't restart after time machine restore

I restored my external firewire 800 hard drive from a time machine restore using my snow leopard insall disk. The restore function said the restore was successful. But when the computer restarted I got the folder with the question mark icon. My internal hard drive went bad a year ago.
What to do?

Did you restore the entire contents of your Mac from the Time Machine backup? Was Time Machine backing up everything?
Try booting with an "option" key held down. That will show the internal disk volume if it has a bootable copy of OS X on it.
You might try installing OS X over the top of what's currently on the disk. If that doesn't help, erase the disk, install OS X on it, then use Setup Assistant (unless I'm misremembering and it's actually Migration Assistant) to transfer the TIme Machine contents again.
Incidentally, after things are working again, the first time Time Machine runs it will back up everything again.

MacBook Pro won't book after Time Machine restore

I have a late 2010 MacBook Pro that had 4 bad blocks on the hard drive. I reformatted and zeroed out the drive and then restored from a Time Machine backup which was Mac OS 10.6.6. Now the MBP won't boot. I get the Apple logo and the spinning gear, and that's it. I gave it as long as 20 minutes but no boot. Starting from the DVD shows I have that system on the drive in Startup Disk. I've run myriad utilities including Disk Utility and Disk Warrior and everything is fine.
Before I reinstall 10.6, I thought I'd poke my head in here and tap the collective wisdom.

Your situation sounds a bit similar to mine except you had the gray screen before you did anything, which to me means you had a problem that already surfaced, where I did not. I don't know if the Windoze partition has anything to do with it, but if you are running SN 10.6 you can try the same solution I did. Boot from the SN DVD and install a new version of SN over you old. Don't worry, all your files will be there. The installer is intelligent enough to realize you already have SN and will do the install over your old system files only. This is the 'new' Archive and Install scenario that existed on previous versions of Mac OS X install DVDs.
You will then have to run updates to get the system back to whatever version you were running previously.
This is what I did and it worked fine, altho it was more time consuming than I wanted.
J D Thomas
ThomaStudios

Mail / Software Update / Web Won't Start After Time Machine Resurrect

Hi there.
Ran through some serious permissions issues trying to mess with the ACLs, as AFS wasn't working. So it shoved an ACL into some recursive folders, and it went all nasty, had to force restart.
So I tried to take out the ACL on the drive, then it wouldn't start.
Took a Time Machine backup from earlier on today, and I'm still getting ACLs. She's starting up, but won't get those services restarted for some reason.
Are they not on that drive? Time Machine says it rewrites the drive. I'm going to start an install of earlier on in the week, but am I not going to get this fixed? It's taken a long time to get this thing working, so I'm really worried.
Any ideas as to what I should do? How can I get the ACLs out of there? My custom ACLs are maybe 3 entries, so I could restart back where it was and set them again. It wasn't working anyway.
Cheers

BTW, spoke to Apple's peeps, and I had to do the following. Turns out, Time Machine and X Server don't really work to well. Because the /var/spool/ items are live, they can't be copied. Of course I told them that was a very important part of all this. I suggested a daemon to shadow those subdirs. Let's expect that in the future.
1. Image problem drive on alternative drive on server
2. Backup Server Admin prefs & Server Admin Settings on client
3. Backup Open Directory through Server Admin on alternative drive on server
4. Backup Workgroup Manager on client
5. Install OS X Server
6. Use upstream ISP for external DNS, switch to 192.168.1.5 (local server DNS) when server has imported info, restart
7. Get Server working with all preferences. Client might have to have Internal DNS (192.168.1.5), External DNS. Or, just internal DNS. It's interesting that the previous setup had both DNS' for client setup. I had to try to re-import, specifically, some services, to take their kak. Turn off the service for it to be best-receiving (that isn't a word). Then restart the service, and give it several seconds to fall into place with table creation, DNS checking, etc. Don't be too quick for this to happen.
8. Instal third party scripting language & MySQL
Advice: when in doubt, restart the box. Also, save time, image drives at several times. These are < 10 GB for the most part, if you turn off crap like global printer drivers, and localisations, during installation.
This restart, coupled with my DNS troubleshooting stuff the second time around (apparently the MAJOR problem with this software), saved me hours.
Cheers

Aperture won't launch after Time Machine Migration

After a hard drive failure, I've just got my system all restored from a Time Machine backup, but when I try to launch Aperture it just fails.
Not sure whether there's something obvious I'm not doing, or whether I need to reinstall. The library package etc all seems to be where it ought to be.
Any ideas welcomed!
Thanks.

Thanks - that fixed it nicely.

White screen & won't boot after Time Machine restore 10.8.2

Hello,
I know someone posted a similar issue but that it was related to a hardware failure. Mine was not a hardware failure.
Just wanted to give an FYI to anyone who may run into this issue. I recently restored my Macbook Pro from a Time Machine backup (10.8.2)
and I was getting a blank white screen at startup where the spinning line "|" would appear and then go away, and then come back, and then disappear... Over and over. Booting into single user mode resulted in the same issue.
I ended up re-installing Mountain Lion over itself and my machine booted sucessfully. Did all the software updates and I'm back at 10.8.2 again.
This is just an FYI, something for you to try if you get the same error, hope this helps someone.

Startup command-s and at the prompt type reboot
Then press return.

The disk won't eject after Time Machine backup

Similar Messages

Maybe you are looking for