The display queue window is blank - message mapping

Hi, sometimes, when I want to see the queues in IB: Design in the mappings, the queue window is just blank.
any ideas?

Hi,
when you change the mapping and save it the values
from the test tab dissapear and you need to fill once more
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Similar Messages

Delete all the entries in target table when message mapping?

Hello Gurus,
I have a requirement in the project. When I do message mapping, I need to delete all the entries in the target table and then insert the new rows. From searching the old posts, I know it is possible without BPM. Can anyone please help me out? I really appreciated it.
Regards,
Bai

Hi Bai,
Check the below links:
http://help.sap.com/saphelp_nwpi711/helpdata/en/43/9519abb1146353e10000000a11466f/frameset.htm
Defining a DELETE Statement
http://help.sap.com/saphelp_nwpi711/helpdata/en/44/7b6e85fde93673e10000000a114a6b/content.htm
Thanks,

Apart from the lock button problem in iphone 5 the display brightness suddenly goes blank and becomes normal after locking and unlocking the iphone. The Apple service centre in India is denying to service the iphone as it was purchase in USA even thoug it

Apart from the lock button problem in iphone 5 the display brightness suddenly goes blank and becomes normal after locking and unlocking the iphone. The Apple service centre in India is denying to service the iphone as it was purchase in USA even though the iphone is in warranty.

iPhones do not have an international warranty. Warranty is valid only for the country of purchase. This is most likely because different countries require different iPhone models. Not reasonable to expect all countries to maintain stock for all models.

Where is the System queued windows error reporting?

Hi Guys,
I would like to increase the free disk usage to more than 15% on the mailbox server Drive C. After check and discuss, we are to achieve this goal that move the system queued windows error reporting to other place. However, i can't find this file after
read the relevant documents and can't find this file in Drive C. Could you help me found path of this file? it's urgent. i will waiting at online.
note: Our boss is not allow to delete this file. i am so sorry.

Hi,
You can check the Windows Error Reporting Service queue in the paths below:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue
C:\Users\Username\AppData\Local\Microsoft\Windows\WER\ReportQueue (For Users)
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Hi Susie,
This is Daniel.
I note that This file take 18.2GB through view disk clear up, but these all folder just take 800M, I would like to they are not in their proper place.
but I would like to thanks for you help.

Problem with Mapping exectution and the display Queue

Hi All,
I am getting the following error while testing any newly designed mapping.
Source code has syntax error: java.lang.NoClassDefFoundError: com/sun/tools/javac/Main Exception in thread "main"
But all previously designed(activated) mappings are executing successfully.
Can you please anybody calrify this problem??
Thanks,
sekhar

If you are using UDF in your message mapping then please do check it first before
testing the whole mapping
you can check UDF by :
source_field -
UDF-----target_filed
right click on the UDF node in the maaping Editor and slecet queue, it will check the your UDF code and if has error it will show you.
Thanks
Farooq.

Rewards points if you found it useful

QuickTime 10.1 does not seem to be compatible with OSX Lion - clicking on the displayed file window switches to another displayed app, doesn't play or control the video.

If I open a movie file (appears to be any type - .mov, m4v, mv4) it displays on the desktop, but when clicked, the Mac reverts to another open application (immediately UNDER to point of the mouse click) and not the displayed movie file. It appears the screen mapping is flawed...
Anyone else have this problem? (does not appear to be a problem with QT7) Running OSX Lion 10.7.3 and QT Player 10.1 (501.8) - all most current as far as I can tell...

Yes, same problem. The active clickable area appears to be shifted down and to the right as if it is the shadow mask (to make it look like layers in the display) that is responding. Means you can't move the control palette to the top of the window (to not block security video with time track at bottom) or even close the window. The X in the bubble appears when moused over but the click goes through it.
Most obvious if you open more than one movie at a time and they cascade. You can't get at the ones underneath until a few down the stack and it gets an upper wrong one.
Who's testing these things?
For comparison testing to recreate problem: Mac Pro (System Information has also been dumbed down from System Profiler, push System Report for the useful stuff) with an ATI Radeon HD 5770 driving two displays.
Also viewing desktop of another computer on the network is slower and, for instance in World of Warcraft, the hand pointer flickers.
And finder windows can't be narrowed as much any more to show only a list of file names for drag and drop sorting.
Was hoping that by 10.7.3, it would be safe to jump, since several posts told me how to Terminal > networksetup -setv6off Ethernet to fix iTunes streaming to expresses and other dumb bugs.

Get the value of Container element in message mapping

Hi,
Is it possible to read the value of container elements(bpm) in a UDF defined in message mapping. If yes, please tell me how?
Thanks and regards,
Siji

Siji,
Refer thread - Creating the container Object In Java Mapping
Regards,
Geetha

About to move from Windows to Mac. Considering purchasing retina display MBP 15" with dual boot system as I need some of my programs. How is the display in windows for photoshop?

Has anyone got any thoughts or have you yourself purchased the MBP with Retina display and added the dual boot system with windows?
I desperately need to update my gear and want a MBP.
I'm a full time photographer at my local paper and freelance photographer - use computers A LOT, and only use windows. I've experienced mac and know I prefer it, the way it runs pleases me a whole lot more and for the amount i'm processing/working I need something that will keep up.
With 12 years of photoshop gear loaded up for all my photo processing etc, I'm wanting to add Windows and have use of both. Windows would run photoshop that I had already purchased some time ago - question is, how will it run? what will the display be like running Windows on Mac with the retina display?
I use CS4 at the moment and can't afford to upgrade to CS6 just yet, plus i'd waste a lot of what I already have by starting again on Mac. I'd use Mac for everything else, need the use of Windows for portions of what I do.
About to head to Canada and want to get set up for the road. Any help is much appreciated.
Thanks heaps!

There are some drawbacks, running Windows 7 (only) on a Mac via Bootcamp yields less than stellar results, especially with the Retina display.
And of your traveling, the Mac's high power needs (especially the Retina display) and lack of removable battery are going to be a serious issue. The Retina display is glossy, not ideal for viewing on the road and in varied environments.
CS4 won't run on the OS X version that comes with a Mac, so your looking at purchasing CS6.
Support for Windows is more widespread than for Mac's, also if you ever need to redownload OS X to fix a issue, requires a fast reliable Internet connection of the broadband kind.
If your running Windows on your Mac, you can expect to be on your own and not get support as easily as if you were running it on a regular PC.
If you can't afford to keep up with CS upgrades, then you shouldn't be considering a Mac because there are more paid upgrades on that than on Windows 7, it's like a annual nightmare.
IMMO your still better off on a decent, 1920 x 1080 res, matte screen, removable battery (with extras), Win 7 Pro i7 machine (Pro+ runs XP programs) which will stay like it is and get security updates until 2020.
OS X changes every year and if you don't upgrade, + all your third party software, then about 3 years later your left behind for updates.
Also you will have to buy Win 7 to run on your Mac, the OEM disks won't work.
If your trying to budget, then a Mac is certainly not for you.

33% of the top application window becomes blank in Windows 7 32 bit.

In an application written
in C + +with MFC becomes the top part (about 33%) of
the application window gray and will not be updated/refreshed.This happens
when the user clicks a scroll bar,
but do not make an active choice but rather
click out of the scroll bar.
When that part of the
application window is gray, one can obtain
the underlying graphic by minimize and enlarge
the window again.
This only happens on Windows 7 32bit.
No problems with Windows7 64 bit, nor in
Win XP. Have not tested
in Vista.
The problem existed in Windows7 64bit before the security patch
KB2660465. But after it
is put on the problem is gone.
But KB2660465 does not solve the problem in
Windows 7 32-bit.
Any ideas?
Some others who have experienced similar
problems?
It is not hardware related. We have done a lot of tests on different computers and with different configurations in Windows.

Perhaps MSDN forum is better for resolving your problem.
Thanks for understanding
Milos

My iphone 4 shuts off and won't come back on and sometimes when i send a text the other person gets a blank message. Just got this phone and really don't want to put up with a bunch of problems

I just got the i phone 4 on Friday and it has shut off and not come back on twice. I was able to get it to come on by holding the top button down for a few seconds but i don't want to have to do that. Also, i am having a problem with texting, i will send a text and the person on the other end says that I have sent a blank text. Just need to know if this is something that is going to continue because if so then I will take it back and get a Droid

Assuming the phone isn't jailbroken, the basic steps (as needed) are:
Restart phone (you already did this)
Reset phone
Restore phone in iTunes using a backup
Restore in iTunes as new, without using a backup
See appendix B of the User Guide for details
http://manuals.info.apple.com/en_US/iPhone_iOS4_User_Guide.pdf
If your phone is jailbroken, this is the most frequent cause of the problems you described. Restoring could permanently brick the phone.
Note that your iOS is old and the current version is 4.2.8. It's odd that it wasn't updated when your activated your phone in iTunes, being that you got it last Friday.

Clarification needed in Mapping Display Queue

I am trying out a simple message mapping explained in one of
the blog.
My issue is when testing the Mapping , the display queue window displays the the values on the Context Change line also.That is, the grey color also carrys the previous value .
I believe the CC's should shold be a empty value .Any reason why I am seeing the values.
Thanks

Hi,
Technically speaking, the XML instance is imported into the queues before the target field mappings are processed. The contexts are separated in the queue by a context change.
Thus The Context change will contain the previous value of the field in supressed format.
It will inform about the previous position of the context change.
The Context change is can be used in Advanced User Defined Functions
/people/sravya.talanki2/blog/2005/12/08/message-mapping-simplified-150-part-ii
/people/harrison.holland5/blog/2006/12/08/mapping-context-changes-in-xi
Thanks
Swarup
Edited by: Swarup Sawant on Feb 25, 2008 10:53 AM

Display queue in message mapping

Hi ,
I need to know the function of ' display queue ' in message mapping . How do i go about it.
Please help.
Thanx nd regards ,
Srestha

Hi,
Whenever you do a graphical mapping you can see the intermediate result in the display queue. When you test your input using the test tab of Message Mapping, you can get only the end result (if it is successfull) or an error. You can debug the error by seeing the display queue of each and every elements involved in that specific mapping. Display quue will consists of :
1) Input (in) to the function
2) Output (out) from the function
3) Conext change
4) SNo. (optional)
Hope you got an idea
Regards
Suraj

Mail regularly open the new blank message window

After Mail initial start the programm opens a new blank message window. When I try to close it I receive the message "Do you want to save it as a draft and work on it later?"
The new blank message window appears regularly every 4-5 minutes. How can I fix it? And thanks in advance for response and help.

Do you see the Outbox in Mail? Does it contain any messages?

Display queue in th emessage mapping

Hi SapAll.
i just want to know about the proper reason on why the pi developers do the display queue in the message mapping programs of every interface that they develope.if so how we can do the proper display queue,as it is displaying in irregular format when i click on display queue especially after testing with the sample xsd under test tab.
will be waiitng for a proper answer .
regards.
Varma.

HI verma,
With display Queue u can actually check for:
1) the values present for the source fileds
2) If any functions used in the mapping, then u can display what r the inputs to that function and what is the output of that function.
Ex: If u use remove context function to map the fileds, then by displaying the Queue of target filed, u can easilly see the context changes.
Display the Queues of sorce and target fileds. u can easilly find the difference.
If u use split by value, then u can see the extra context changes for the target field.
3) Where exactky the mapping is throwing exception (at what field) i.e., if u right click on any field and if u click display Queue,: if the queue is displayed then at that point the mapping is working fine, but if it has error then by selecting display queue it throws the exception there itself. Hence we can make sure that the mapping is failing at that particular fleld.
Thanks,
shabbir.

Can I find out the full filename of input file in message mapping?

I have in XI 2.0 the following scenario :
In the inbound fileadapter I read my input file. The filename of the input file is part fixed, part variable (Like INDATA01.txt, INDATA03.txt, etc).
So in my Adapterconfiguration, I specify the filename with a wildcard (INDATA*.txt).
What I now want to do, is in my Message Mapping use the full filename , so I can do something different for every filenumber. Is there a way where I can get the full filename available in my message mapping (I did not find the filename in the XML in the message trace).

You're backing up hundreds or thousands of files: There's the catalog (database) itself and also the media files.
In PSE10, when doing a backup, PSE displays the size of the backup before you begin the actual backup:
I assume PSE8 will have something similar.
Ken

The display queue window is blank - message mapping

Similar Messages

Maybe you are looking for