The Distribution Kit Builder is Looking for the NI Variable Engine in an old distribution, cant find it and fails to build

I am unable to build a distribution kit because the builder appears to have saved a path to the NI Variable Engine which is not valid. I appear to have the NI Variable Engine installed. There are NI Variable Engine 2.5.0 .xml files loaded in on my computer (See attached for listing of drivers loaded). I do not seem to be able to break CVI's Link to my past installers for getting drivers. I've tried creating a new installer but had the same trouble.
I am running a 64 bit Laptop with Windows 7, building a 32 bit application, running CVI 2010.
Solved!
Go to Solution.
Attachments:
ATAHM Outline.ppt ‏61 KB

The default path is the path to whatever distribution installed NI Variable Engine on your machine. For example, if it was installed from a Driver Disk, the path would probably be D:\. However, from the images you originally posted, I can see that you were being prompted to provide the path to one of your earlier ATAHM distributions. It was looking for it at this path:
c:\Users\chill\Documents\Development\AATAS\ATAHM\distributions_ATAHM\ATAHM Oct 24 2011\
Do you still have that distribution? If you can point it to that distribuiton, you should be good.
Now back to the error you were seeing... Your version of that .NET manifest file matches (except for the version number) Revision A from the Knowledge Base, so you should try replacing it with Revision B (and rename it to NI .NET Framework 2.0 Language Pack x86 Installer {F8ECD2D6-659C-49EB-8454-5F8F7B526FCF}.xml). Make sure you restart CVI after swapping the file. I would expect that to solve your problem. If it doesn't, you'll have to let me know what the new issue is, or if you're somehow still seeing the same error message.
Mert A.
National Instruments

Similar Messages

Can I force the bootcamp wizard to skip looking for the bootcamp drivers? I have already downloaded the latest drivers and loaded them on a FAT usb drive. All I want is for bootcamp to create the partition and allow me to install windows 8 pro

Hi Everyone,
Can I force the bootcamp wizard to skip looking for the bootcamp drivers? I have already downloaded the latest drivers and loaded them on a FAT usb drive. All I want is for bootcamp to create the partition and allow me to install windows 8 pro.
The bootcamp drivers have been downloaded from apple's website. Filename: BootCamp5.0.5033
I have a iMac 27" late 2013 model.
NOTE: I have downloaded the drivers manually from apples support site as the bootcamp wizard fails third of the way through the download.
Appreciate any assistance.
Regards,
asdutoit

There is a missing point in this thread, and it is that the Boot Camp drivers for the Late 2013 iMac can only be downloaded from Boot Camp Assistant. The Boot Camp drivers available in the Apple site are not compatible with that iMac.
Delete the Boot Camp drivers from the USB drive, open Boot Camp Assistant and try to download the Boot Camp drivers again. If you get a message telling you that they could not be downloaded, I would try reinstalling OS X through OS X Recovery, by holding down Command and R keys while your Mac is starting up

When my husband and I try to share our libraries and import from each others libraries, we get as far as seeing the library on the screen. The next step is to look for the 'Show' menu at the bottom of the screen, but neither of us has any such thing. ?

When my husband and I try to import from each other's libraries, using Home Sharing, we are intructed to look for the "Show" menu at the bottom of the screen. Neither of us has anything like this on our screens. How and where do we locate it? We both have the latest itunes running.

Hey fantail163,
If you are not seeing the button to show menu, try out the troubleshooting steps for Home Sharing.
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Thanks for using Apple Support Communities.
Regards,
-Norm G.

What colors will the s6 come in? Looking for the blue

I am going to preorder the s6 but i'm wondering what colors it is going to come in. I am looking to get the blue that is available for the regular s6

I agree they need to sell it in blue there's only four colors to choose from. When something in life don't make sense I usually put a $ sign in front of it, then it usually does. Maybe the blue would cost them $3 bucks more. If that is the case it is stooping pretty low, lol. Maybe they will offer it in blue.
The Galaxy s6 has good specs except for the battery. The s5 has a 2800 mAh the s6 drops to a 2550 mAh battery, whats up with that? They have some battery saving setting, but so what. The Droid Maxx has a 3500 mAh and the Turbo has a 3900 mAh battery. The battery strength is important with a smartphone.
But we need it in blue, black phones are boring.

I'm looking for the dimensional drawing for the NI 9913 DIN rail mounting kit.

I'm looking for the dimensional drawing for the NI 9913 DIN rail mounting kit. Found drawings for other kits, but not the NI 9913.

Hello Natrop,
The dimensional drawings for that specific kit do not seem to be publicly available right now. For the time being I would recommend that you create a service request with the Applications Engineering team at NI to get a copy of those files.
Siana A.
Application Engineering
National Instruments

Building a system for the first time

I recently posted a few weeks back about buying a system from either Dell or HP http://forums.adobe.com/thread/732545?tstart=0. I quickly learned that those systems were not going to fit my need based on my budget. So, I decided after researching components that I will build a computer by hand for the first time. I am still operating on a budget of around $1000, but I'm giving the budget a bit of flexibility so I don't limit my options. I am a hobbyist who only has experience using Power Director on my laptop, but I had a lot of fun editing for the first time and I want to step up my game. With the new system, I plan to use adobe premiere cs5 and after effects. I will capture my video from either an HD Helmet cam or HD flip format is MPEG-4 AVC/H.264. So where I need help is selecting the right things to optimize my performance. The following is a list of items I'm looking with their prices. Please help me decide what will be right for me. Open to any combo of suggestions or comments. Thanks!
Processor
Intel i7 930 $200 microcenter
Intel i7 950 $230 microcenter
I don't know if I want overclock yet, but it sounds like a good idea. $30 for the upgrade to the i7 950 seems pretty good. ro do I use the money elsewhere?
Motherboard
GIGABYTE GA-X58A-UD3R $210
http://www.newegg.com/Product/Product.aspx?Item=N82E16813128423
Seems like a good mobo. Are there any features that this board lacks that I should look for in another board? Also, newegg offers significant deals on "open box" products. Is this a good way to go?
Ram
I have a few questions for this selection. I've currently budgeted approximately $250 for ram. I'm looking at going with 12GB. I certainly don't have the budget for 24GB, but what about 16GB?
Do I look for 1333 or 1600? 2GB or 4GB sticks? Would I be fine if I bought say 2 packs of 6GB ram, both same manufacturer and same type or would I want to buy 1 pack of 12GB?
GPU
Nvidia Geforce gtx 460 1GB $220
Is it worth it to go to the 470? I know it's a better card but being a budget is really worth the upgrade or can I get away with a 460?
Any recomendations for a 460 as there are many in the same price range?
Drives
I see these drives priced in the $55 range which would leave at around $220 for the lot of em
These are the drives I'm looking at as they are highly recommended on this board:
SAMSUNG Spinpoint F3
WD Caviar Black
Right now, I plan to buy 4 drives. Do I want 4 of the exact same? or say 1 cavier black for os/ programs and 3 samsung f3 for pagefile/scratch/renders? Can I also get a brief description of what these are too? Also, could have a 500gb for os/programs and 1tb for the rest or would it be advisable for 1tb for all? or 500gb for all?
I don't think I can do a raid setup based on my budget, but I saw this as an option on the thread for storage rules is to use the on-board IHCR or Marvell chip. I don't know really anything about this, but what would the price be to explore this option?
Case
Cooler Master Storm Scout $90
http://www.newegg.com/Product/Product.aspx?Item=N82E16811119196
I picked this case for a few reasons. I seem move about every 6 months so the handles on top would be very useful, and it seems to have good cooling. I know a full size case is recommended, but they seem to be significantly more.
Cooling
Noctua NH-U12P SE2 120mm SSO CPU Cooler $75
Everywhere I look this cooler seems to get great reviews. I figure it could be a good idea to get a good cooler if I get a mid-tower case.
The only other option I can think of for case/cooling is to combine the budgeted price for both and look at different options like a full size case with a less quality cooler. Is this a better option
PSU
Looking into an 850 W power supply. I figure to budget $80 towards as I've seen a few in that range
http://www.newegg.com/Product/Product.aspx?Item=N82E16817517003
so would something like this work?
Final Thoughts
So, when you add it all up its about $1350. First question, how does this look overall? Nothing I've chosen is obviously overkill, but is there anything I can afford to go cheaper on? or anything I should invest more into?
Thanks again to everyone for the help. The resources, info and people on this forum have just been awesome.

Seems like we are planning very similar PCs. My build is going to be for: amateur video editing including animation mainly with CS5, application design and coding mainly with MS Visual Studio 2008, HTPC (until I build a cheap dedicated unit for the TV), general family computing. I am new to this stuff, but can at least share some pricing and my decision making process so far.
Here is what I have selected so far regarding the parts:
MotherBoard: Gigabyte GA-X58A-UD3R x58
Seems like one of the lower cost x58 MBs and has some decent reviews. Wait for a sale, you should be able to find this for around $180.00. That is how much I got it for from New Egg (straight up with savings code no rebate), should be arriving on my doorstep tomorrow. Also, I think Fry's has it now for $170.00 in store, but that includes a $20.00 rebate and tax.
PowerSupply: Corsair TX650W
Some might think this is on the low side. On the other hand, I have gotten other conflicting advice, stating that many people overestimate their actual power needs. So who knows. I have read that a PSU works more efficient when it is matched to the power needs - meaning that a 1000w PSU that is generally seeing 200w usage might not be so efficient. Anyway, I got the PSU for $50.00 from New Egg (with rebate), and it has a good reputation, so we will see how it goes.
Graphics Card: GIGABYTE GV-N460OC-1GI GeForce GTX 460 (Fermi) 1GB 256-bit GDDR5
I was planning on a lower cost card, but then noticed this card for sale over the weekend for $178.00 (with rebate), so I ordered one. I have read the GTX460 has reasonable power requirements, and can be made to take advantage of CUDA/Mercury with CS5 (although haven't done much research into that). This particular version based on reviews, seems fairly quite with the twin fans. It's possible I overspent a bit on this card considering my needs, time will tell.
Here is what I am planning to purchase:
CPU: i7 930
I am fortunate to live near a Fry's and MicroCenter ($200.00). From reading the forum, seems like this is generally the lowest CPU folks go in terms of building an editing machine. I understand the argument that for only $30.00 more, one can upgrade to the i7 950. On the other hand, that argument could be made for many of the components, and then before you know it, a little extra here and there, and the budget is shot:) So I am planning to draw the line at the 930.
Here are my undecided’s:
Memory
I am up in the air between 6or12gig/module compatibility/cost. But one thing for you to keep in mind, is the official memory certified for the motherboard you select. For the Gigabyte motherboard, I missed out on a recent RAM deal, because the RAM was not officially certified for the board. Some people tell me this is important, while others say "RAM is RAM" and no big deal. Something to consider.
HardDrives
Same as you, considering the Samsung Spinpoint F3. Good prices now at MicroCenter on the 16MB cache models in 500 and 1TB sizes. I just don't know if larger cache sizes are important or not, since they are also offered in 32MB and higher.
Anyway, good luck with your build and hope it works well.

What's the maximum digital I/O frequency for the NI LabVIEW RIO Evaluation Kit ?

Hi!
I'm trying to analyze some sort of sine signal at the frequency of about 3 MHz. Because the analysis should be very precise and fast (about 10 samples per period), I'm needing the maximum digital I/O frequency of the NI LabVIEW RIO Evaluation Kit.
Regards,
Erik

Dracyon,
Can you please clarify a couple of things: you say you are trying to acquire a sine wave that has a frequency of 3 MHz, but you are asking for the maximum DIO frequency. I believe what you need to know is the maximum analog sampling frequency. For the sbRIO-9636 (part of the evaluation kit), the maximum aggregate sampling frequency is 200 kS/s at 16 bits of resolution. At 10 samples per period, you could sample a ~20k analog signal. If you are actually looking for maximum DIO frequency, this is a bit more complicated. We have a good whitepaper explaining this.
Best,
Tannerite
National Instruments

Looking for the LMS based on SharePoint

Hi,
We are using MOSS 2007 and are looking for the Learning Management system, wich could be integrated.
Found SharePointLMS (http://www.sharepointlms.com/) and Sharepoint Learning Kit
Any other suggestions?
May be someone can compare these two at list?

Hi
We have LMS based on Share Point Server, you can loggon to www.intralearn.com for more details. You can send a mail /contact at the given below address. We have office accross the globe.
Surya Prakash
The Boston Group
Phone: +91 40 2354 0519 /547 / 576
Mobile: +91 9948919134
Email : [email protected]
Lerning Portal : www.intralearn.com

I have a question that I think I know the answer to, but am looking for confirmation. I have a dell computer at home that has clip art available on it for putting pictures into documents. Do I need to install an APP to get something similar to clip art?

I have a question that I think I know the answer to, but am looking for confirmation. I have a desktop computer at home that has clip art loaded onto it. I recently got an iPad and am looking for something similar. I assume I need to get an APP for it, and if that is correct, does anyone have one that they like?

Sort of. There is an app called art shop that gives you a place to park clip art. But I don't think you really need it.
If you have a collection of clip art you want available, move it to the camera roll on your pad/ phone, then copy paste into your document the clip you want.
You can get them into the camaera roll by putting them in a single event in your picture library and syncing them over, or e mail them to your self, and save to the camera roll, or send them to drop box, and bring them down that way.
The challenge is getting them all in one place to make it easy for you to find, which is why syncing might be the best approach in the long run.
As near as I can tell there is not a ready made clip art collection in app format laying around.

Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1 - which is what introduced the bugs.

Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1 - which is what introduced the bugs.
The only thing that I can think of that might be causing the issues that I have a Mac Mini on Mavericks.
Dave

Hi
I have discovered that my question above is a non-question. A user triggered by looking at the below article about Illustrator 2014 cc 17.0.2
http://helpx.adobe.com/illustrator/release-note/illustrator-17-0-2-release-notes.html
He had recently upgraded from wht we now know is 18.0 to 18.1 which is the latest version. He read the above artic
le and supposed that it was a bug fix release for his version - because the v17 ov18 number is not often displayed. It is usually just 2014 CC.
I have asked him to post a bug report about Adobe Illustrator CC 2014.1
Dave

I cannot add a Wi-Fi guest network. Gone to Utilities Airport Utilities and all get is an image/browser of my Airport Extreme. Looking for the browser which has the title Wireless but cannot find anywhere. I need help?

I cannot add a Wi-Fi guest network. Gone to Utilities>Airport Utilities and all I get is an image/browser of my Airport Extreme. Looking for the browser window which has the title Wireless but cannot find anywhere. What am I doing wrong?

Open AirPort Utility. The first screen looks something like this:
Click on the AirPort Extreme and another screen will appear. Click Edit, then the window with the Wireless tab will appear.
If you do not see these screens, you will need to start over and configure your AirPort again.

Problem with my program looking for the settings file in the wrong folder

I have been writing a simple FTP file uploader, what I want to do is be able to select the files I want to upload in windows explorer and then right click and click the menu item and it launches the program and passes the files paths that I have selected to it.
So I use this in the windows registry "C:\Program Files\Java\jre1.6.0_03\bin\java.exe -jar D:\BenFTP\BenFTP.jar %1"
It launches fine and has no problem finding the files I want to upload. The problem is that it tries to look for the settings file in the same folder that the file I am try to upload is in. Which it's not suppose to do since the settings file is in the same folder that the .jar is in.
Edited by: ColNewman on Feb 5, 2008 6:55 PM

So, you're looking for your settings file in your current working directory. There's no way to set the CWD in your registry entry (is there?) so that isn't a practical thing to do. Presumably you're using a File object or a FileReader or something? Can't do that.
One alternative is to look for the settings file in the classpath. You can get a URL to a file in the classpath like this:URL settings = this.getClass().getResource("/settings.xml");Or you can get an InputStream to read the file by using the getResourceAsStream method. You would have to make sure that your executable jar file contained a Class-Path entry that specified the right directory, because the directory the jar is contained in isn't automatically in an executable jar's classpath.
Another alternative is to ask the user where the settings file is supposed to be, and put an entry in the Preferences (java.util.prefs) to remember that location.

When I try to reset my iPad mini it keeps asking for a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?

I know my passcode is correct but when I try to reset my iPad mini it keeps asking for a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?

If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

How to look for the Table Name

Hi Friends,
Sometimes we need to download the table for the desired information if the same is not available from a particular report. How to look for the table name? Is there a report or a particular feild, where we can find the name of the particular table?
Thanks for the assistance.
Regards

Hi Friend,
If you want to see the structures then go to SE11. Sometimes it happens that you cannot find the table names but only fields. In such case, if you want to find the Table names which is not available, then go to SE90.
Abap Dictionary > Fields > Table Fields.
Now Enter the Field name in Right Hand Side of the screen then Execute. You will see the all tables by which that Fields are used.
Regards,
Jigar

Where to look for the computed stats collected using gather_table_stats

I have used analyze command before but new to gather_table_stats.
I have executed gather_table_stats procedure as given below. Now where to look for the statistics estimated and also what are the important parameters I need to look in the stats ? Any major difference between analyze & gather_table_stats ?
SQL> exec dbms_stats.gather_table_stats(ownname => 'TPDBS01A', tabname => 'x_TPD_STG_TL_SF_LEGAL_OWN
ER' , estimate_percent => 50, method_opt => 'for all indexed columns size auto');
PL/SQL procedure successfully completed.

The command "analyze table" is deprecated for gathering optimizer statistics. But it is still the only command to get for instance the chained rows. This command is no longer maintained for new features, so if you use this command to collect statistics, it might not collect all needed numbers for the optimizer so the plan could be wrong.
The package dbms_stats is collecting all the figures that the optimizer needs to genererate an optimal access plan. All new database features are incorporated only here.
The statistics numbers can be found in the normal tables like USER|ALL|DBA_TABLES, ...TAB_COLUMNS, ...INDEXES, ...IND_COLUMNS etc. There you can find for instance number of rows in table, clustering factor for indexes and more numbers like this. They are not really needed for us human beings, they are used by the optimizer to generate the access plan.

The Distribution Kit Builder is Looking for the NI Variable Engine in an old distribution, cant find it and fails to build

Similar Messages

Maybe you are looking for