"The document 'Backup of Backup of Oral Report' could not be saved as 'Oral Report'. Bad file descriptor"

Hello,
Whenever I try to save my Keynote file, I receive an error message saying: "The document 'Backup of Backup of Oral Report' could not be saved as 'Oral Report'. Bad file descriptor".
I've tried using other name to save my file, saving the file as a backup, saving it within my documents, and on a USB, but the file won't save. I'm using Keynote '09, Version 5.1.1 (1034) on my Mac Desktop running Mac OS X Version 10.6.8
How can I fix this problem and save my file?

change icloud backup to local backup on this compuet. this worked for me.

Similar Messages

  • After upgrading to Maverick, when I double click on the attchment I get this message "...could not be saved, because you cannot change the contents of that fold

    After upgrading to Maverick, when I double click on the attachment I get this message "...could not be saved, because you cannot change the contents of that folder. Change the folder properties and try again, or try saving in a different location." It happens for all types of files.
    Any suggestions as how to fix this?
    I'm on a Mac OS X 10.9.3 with Thunderbird 24.5.0

    Thunderbird > preferences (I think on a mac) and under attachments set the folder

  • Installed the Java patch for MAC yesterday and immediately could not get adobe reader to show pdf files...have troubleshot and can't seem to remedy ...ideas?

    I have used the Firefox troubleshooting guides, no good. The Java patch is enabled and shows when I check applications. However when I run Firefox plugins it still shows the java plug in is outdated and need to be updated immediately.

    OK, I went to the Firefox knowledge base article you cited and followed the directions with the exception that in the drop down menu I choose Adobe Reader for PDF files rather than the plug in default that apparently was set by the Java patch. Problem solved !!!!!!! Thank you so much for taking the time to get me back to the basic place I needed to be to correct this issue. YOU ROCK!!!!

  • Could not initialize class com.crystaldecisions.reports.formatter.export2.E

    i m using Eclipse 3.4.1 Crystal Reports development tool. I have tried to develop a report. On preview it's working fine. when i host the application into tomcat6.0 and tried to open the link, web page provides an Error like "Could not initialize class com.crystaldecisions.reports.formatter.export2.ExportSupervisorEx"
    1 hr before it was worked but not now. i had tried in all the way but getting same problem.
    Anyone help me to solve this issue.
    Thanks in advance.
    Regards,
    Ram

    Thanks Ted. Can u help me on changing the datasource.
    Actually i need to change the datasource from development environment to production server. i had configured the JNDI informations like the following:
    <Context path="/RFT" docBase="RFT" reloadable="true">
            <Resource
              auth="Container"
              type="javax.sql.DataSource"
              driverClassName="com.microsoft.jdbc.sqlserver.SQLServerDriver"
              validationQuery="select 1"
              name="jdbc/datasource"
              username="sa"
              password="$m1sbag$"
              maxIdle="-1"
                     maxActive="0"
              maxWait="5000"
                url="jdbc:microsoft:sqlserver://172.24.151.149:1433;databaseName=Projectgold" />
               <WatchedResource>WEB-INF/web.xml</WatchedResource>
    </Context>
    and mentioned the JNDI Connection Name as 'jdbc/datasource'. but still getting the same connection which one is configured during the report design. need your help to resolve this...
    Thanks,
    Ram

  • After I sync my ipod I'm getting the message that it cannot backup ipod because backup could not be saved on this computer does anyone know what I could try to resolve this issue?

    After I sync my ipod itunes is giving me the message that backup for my ipod cannot be saved on the computer does anyone know what I could do to fix this issue?

    Check out this Apple document -> iTunes: "Backup could not be saved on the computer" alert message
    To resolve this issue, delete the backup in iTunes Preferences and then create a new backup. If you would like to retain a copy of the backup, you can move the backup file to a different location. The backup is located in the locations below.
    On Windows Vista and Windows 7:
    \Users\[username]\AppData\Roaming\Apple Computer\MobileSync\Backup\
    To delete the backup file:
        Open iTunes Preferences by choosing iTunes > Preferences (Mac) or Edit > Preferences (Windows).
        Select Devices.
        Select the device backup to delete.
        Click Delete Backup. iTunes will ask if you are sure you want to delete the backup. Click Delete Backup.
        Click OK.
    To manually create a new backup, right-click (or Control-click) iPhone on the left side of the iTunes window under Devices and choose Back Up from the shortcut menu.

  • I deleted iTunes when it said "iTunes could not back up iPhone because the backup could not be saved on the computer"and now it wont let me install it again and keeps saying "itunes cannot be installed because the file cannot be found in the cabinet "

    iTunes told me to delete my backup folder when I was having problems syncing my phone to my computer. After that it wouldn't work at all. After trying and trying I deleted iTunes when it said "iTunes could not back up iPhone because the backup could not be saved on the computer"and now it wont let me install it again and keeps saying "itunes cannot be installed because the file cannot be found in the cabinet ". What the **** itunes? Nothing is working!!
    I wanted to update my iTunes so I could sync my phone to my computer and update my phones software so I can use the latest apps that need a 4.2 or higher.
    This is not fun for me so if anyone knows what I can do to fix this please help. Is it possible to download the "cabinent file" with the lastest iTunes?
    Thank you.
    -Kait
    My phone is the iPhone4 and my computer is a Windows Vista

    I doubt that corrupt files are the problem. It is more likely a space or permissions issue. Is the hard-drive on which iTunes is stored close to capacity? Do you (or the particular user profile you have logged on with) have the requisite permissions to save to that drive?
    Otherwise, do you get an error code? This might point us in the right direction.

  • HT1766 At the end of a synch I am getting the following error message "iTunes could not back up the iPod because the backup could not be saved on the computer".  Any ideas on how to resolve?

    At the end of a synch I am getting the following error message "iTunes could not back up the iPod because the backup could not be saved on the computer".  Any ideas on how to resolve?

    See:
    iOS: Troubleshooting backup issues in iTunes
    Try going to iTunes>Preferences>Devices and delete the existing backup so iTunes creates an entire new one vice changing the existing one.

  • Itunes could not back up iphone because backup could not be saved on the PC

    I am not able to backup my iphone. After the last step it always comes up with this message "itunes could not back up iphone because backup could not be saved on the computer" . I tried all solutions mentioned earlier like changing time zone, deleting previous backups & manually backing up, changing user admin, running itunes as an admin, etc .
    I guess my problem lies in the Camera roll. I deleted all my pictures in it and I am left with 3 images. I guess they are corrupt as I am not able to delete them. When I try to delete them from iphone gallery, it crashes. When I try to delete it from external devices like when its connected to PC, same problem occurs, cant delete these 3 pictures. I guess they are corrupt.
    Can you please let me know what to do.I dont know want to restore to factory settins

    I doubt that corrupt files are the problem. It is more likely a space or permissions issue. Is the hard-drive on which iTunes is stored close to capacity? Do you (or the particular user profile you have logged on with) have the requisite permissions to save to that drive?
    Otherwise, do you get an error code? This might point us in the right direction.

  • My iPhone Won't Sync with computer. It used to; but it doesn't now. I don't have iCloud. When I try to sync I get a message that reads: iTunes could not back up the iPhone "owner's name appears here iPhone" because the backup could not be saved on compute

    Why won't my iPhone sync with my computer? When I hook the phone up to iTunes I get a message that reads: iTunes could not back up the iPhone because the backup could not be saved on the computer. This never happened before.

    Hey Janice Lucoff,
    Thanks for the question. It sounds like you are experiencing issues backing up your iPhone 4s in iTunes, which is causing issues finishing the sync of your device. The following resource should help resolve your issue, as it refers to the exact error message you described:
    iOS: If you can't back up or restore from a backup in iTunes
    http://support.apple.com/kb/TS2529
    Thanks,
    Matt M.

  • ITunes could not restore the iPhone because the backup could not be saved on this computer

    Dears,
    Today I planned to update my iPhone 4 to iOS7.
    After update while my iPhone was connected to the computer, it didn't work and iTunes asked me to restore my iPhone before I can use it.
    Well, I had to click Ok and iPhone was restore to factory settings and removed everything.
    Now I went to iTunes again to restore the entire backup I created eariler for the photos, videos, contacts and everything 20+GB.
    The iTunes starts the restore process but stoppes in the middle of the progress and gives the error:
    iTunes could not restore the iPhone"My iPhone Name" because the backup could not be saved on this computer.
    I tried 3 times but no avail.
    If my C: drive is almost full and it might be the issue, can I move my backup files to another location D: drive for example and restore them to my iPhone?
    Please help me.
    Thank you.

    I get the same issue w/ an iPad that I just updated to the latest iOS.  I made the backup before upgrading the iOS.  Now when i try to restore that backup made 35 min or so ago, I get this error.  Help!

  • TS2529 Tried everything. Still get "backup could not be saved on the computer". Have iPad 1 and Windows 7 (64 bit) with all latest updates.

    Tried everything. Still get "backup could not be saved on the computer". Have iPad 1 and Windows 7 (64 bit) with all latest updates. Now what? Is iPad 1 now incompatible with iTunes?

    Have you tried here:
    iOS: Troubleshooting backup issues in iTunes
    Have you tried deleig the existing backup file? I\You can find it location here:
    iTunes: About iOS backups
    Saying your tried everything provides us with zero information as to what you did try.

  • Backup could not be saved on the computer

    Everytime I try to sync my iPod touch 4g with my notebook PC running Windows 7, I get this message:
    "iTunes could not back up iphone because the backup could not be saved"
    I found all sorts of "solutions" on the web, none of which worked:
    Delete the current backup
    Run iTunes as administrator
    create a new user and run iTunes
    change the timezone
    delete different files
    running iTunes on a different computer running XP
    Some jailbreak fixes - don't want to jailbreak
         Any other ideas? Seems like there should be a log file somewhere that might
    help. Anybody use a 3rd party tool to backup/restore?
    Mike

    change icloud backup to local backup on this compuet. this worked for me.

  • TS3683 I get the error message "backup of this ipad could not be saved to this computer" when trying to backup by ipad.  Why and how do I fix?

    I am trying to backup my ipad to my computer.  It goes through the process, but then tells me a backup could not be saved on my computer.  I have a previous backup on here, so it worked at one time a few months ago.  I've got the latest version of iTunes and even uninstalled and reinstalled iTunes.  Why is this happening and how do I fix it?

    Did you try what was suggested on that page i.e. disconnecting the iPad from your computer and turning the iPad off (press and hold the sleep/wake button until the red 'slide to power off' appears on screen and slide that) and then back on ?
    And if the backup doesn't work after that then try a soft-reset instead of the off and on : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • HT201210 I can't update my IPAD2 to IOS 6, it fails and I get a message "could not backup the IPAD because the backup could not be saved to this computer--I have tried different computers?  Please, anyone have this same issue and figured out a fix?  Thank

    I can't update my IPAD2 to IOS6.  I've tried through ITUNEs.  I get a message after IOS6 is downloaded and extracted, to the effect of "could not backup the IPAD2 because the backup could not be saved to this computer."  I've tried directly from the IPAD, and by connecting through ITUNES to two separate computgers.  Can anyone help?  Thank you.

    However after part of the Itune update completed a message came up on the screen
    saying   "The feature you are trying to use is on a net work resource that is unavailable.
    Which particular .msi file does the message go on to say cannot be found? (Several different .msi files might be mentioned in this context: itunes.msi, bonjour.msi, AppleSoftwareUpdate.msi, etc.)

  • I just tried to sync for the first time and i receieved an error message saying, "Itunes could not backup because backup could not be saved on the compute"??

    i just tried to sync for the first time (iohone to PC) and i receieved an error message saying " it iTunes could not backup because backup could not be saved to the computer"

    just as i've posted the same issue here   hope that someone could give us a hand. I have just swtched from nokia to iPhone for my company cell and i have more than 1000 contacts... it would be murder to create those contacts one by one )))))

Maybe you are looking for

  • How many times can you burn a song to CD?

    Once you've downloaded a song from iTunes, is there a limit to how many times you can then burn it to a CD? Dell   Windows XP   Dell   Windows XP  

  • Namespace problem with freshly installed 8298731

    We have a number of existing B2B installations patched to 8298731 that are working correctly. Recently we performed a clean install of a new server and patched it to 8298731 as well (upgrading to 10.1.2.3 in the process). It has been configured in th

  • How to fix a Domain file that will not open

    We have a Domain file on our Mac Mini that will not open - iWeb keeps saying that it cannot be found, even though it is in the Library/Application Support/iWeb folder. I transferred the Domain file to my GS, and I get the same response - if I switch

  • What is MULTI Operator in PCR

    Dear Experts, Can anyone please brief me regarding the function MULTI  Operator in PCR from where the values are captures in the field AMT,RTE,NUM.It is Payroll Operator.Thanks well in advance. With Regards Shaik

  • Creating a Web Service From an existing Java Project

    Hi folks, I'm new to web services and SAP Netweaver so I need to know if I can use my exisiting Java codes (not EJB's though) for creating web services and the WSDL. I've already gotten the codes working and all and just need to make them into web se