The document cannot be printed. No pages were selected to print.

I am suddenly getting this message when tryin g to print pdf files. I have tried (Brother) printer driver updates. I have the latest version of Acrobat Reader (11.0.02). I am using Mac OSX 10.6.8
Can anyone help?
Thanks
Robert

Similar Messages

Cannot Print, no pages were selected to print!

Hi,
I've seen this error message in a lot of discussions online but yet I haven't been able to solve it. I'm running adobe reader XI (11.0.0).
When I print some PDF documents i get the error stating that "no pages were selected to print". When I look at the document properties I see that all the documents that I get this problem with is version 1.4.
When i try to print a document in version 1.7 it works just fine. Is this by design? Can't I print PDF-documents version 1.4 in this version of adobe reader?
Best regards
Peter

I've actually seen a solution for this quite recently, but I don't remember what it was. And of course the forum search is useless...
Can you try if disabling Protected Mode could be it [Edit | Preferences | Security (Enhanced)].

Adobe Reader 9.1 Cannot print - No pages were selected

When trying to print a PDF on a new Dell PC using Windows XP, sp3, I get a message in a window that says Document cannot be printed. Click ok and the next message is No pages were selected to print. The All button is selected and the message stays the same.

Scadger
For your problem, I'm assuming other programs already print without problem. My only recommendation is backup your system, format, install only your OS and printer, and see if that hits it. Get a fresh copy of Adobe reader, maybe off a magazine CD - the downloads off internet are usually only download managers that install themselves on your system and then download the actual program. Stay away - possible errors can creep in. And maybe stay away from the Adobe Reader install package you have at the moment - mark it suspect. Download your printer software anew.
Basically start fresh. If it works then, I'm guessing a software conflict on your old system is the cause, or your install media you used for your old install was corrupt, only 2 of many possibilities.
But the key here is to make a "ghost" backup of your current system so you can go look for the problem afterwards. Of course, I don't even know if there is backup software like ghost out there for a mac.
Also, I think your mac probably has recovery CDs. Avoid those - get CDs of your OS only. Make sure you install only the OS and printer software - possibly even only the printer driver, not the printer software. The newest latest and greatest versions of all of them.
And easiest probably is to put in a different hard disk for this test - saves you from backing up.
My thoughts are that Adobe Reader should work on your system. It's a software configuration issue. So something you've installed is preventing things from working correctly. Especially since your other programs print to the same printer driver without hassle. But your first step is to get Adobe Reader to print again on a fresh start and prove it still can work, then add stuff until it stops working and blame the last thing you installed.
The actual error, as we've learnt, might be completely unrelated to "no pages were selected".
If you've done all that and still no joy, try a different printer with different software. Then try a different printer cable. Then you've got to move on to changing the machine so you can get away from the ports on your current system, but by this time we're at the point of giving up hope, I hope you don't have to go there. Maybe you could install a peripheral card in your system to add a new port, but that's also more of a hassle than it's worth.
Hope this helps.

Adobe Reader XI - No pages were selected to print

Trying to print PDF's in Adobe Reader XI when trying to print the error message "No pages were selected to print" appears. Trying to print from a network printer, the printer itself is a Dell 2135cn MFP PCL6. I'm working on a cloud server and a colleague of mine seems to have no problem with the issue with printing PDF's to this printer.
Took a look into the issue and attempted to save the file to the desktop, print the file as an image and checked all the properties were correct these all seemed to show no effect on the situation. Used CutePDF to build a new PDF and tried that as well which didn't work. Printed a test page to the printer to see if it printed which it did. Seems I'm only able to print from other programs just not PDF.

HI ,
Kindly follow the below mentioned steps:-
On the Print window select your printer.
Click on advanced tab
select Print as an image
Click Ok.
Try to Print

Document could not print because no pages were selected to print

I have indicated page 151-200 to print. receive the error above

With the limited amount of information you have provided, its virtually impossible to find the reason behind this issue.
Please provide some more information as below:
1. Your OS
2. The version of Adobe Reader on your system (Help > About Adobe Reader)
3. The printer model being used.
4. Is the issue specific to a certain PDF or all PDFs in general. Does it happen with: http://helpx.adobe.com/content/help/en/acrobat/release-note/release-notes-acrobat-reader/_ jcr_content/main-pars/download/file.res/Acrobat_Reader_ReleaseNote_10.1.4.pdf

The page could not be printed, no pages were selected

Hi all. I get the above error printing from Acrobat 9 (not all the time) & have had it both at work & home on different mac's. The pdf will print fine from Acrobat 7.
What I am having to install in my studio at work is both Acrobat 9 + 7 to allow users to print their pdfs (although the installer for 9 states that previous versions must be removed).
I'm sure this has been posted before, but I could not find a solution in the forum so hope someone can help!

Not all pdfs, its quite random. Happens with 10.4, 10.5 &10.6. Gigabites of hd space, any printer.
If you google the error you will find plenty of these errors reprorted, the top hit being one you have answered.
Has Adobe rectified this problem as yet?

It says The Document Cannot Be Printed No Pages have been selected to print

How come when I try to print a PDF file it takes a long time to flatten and then says "The Document Cannot Be Printed" and then "No Pages have been selected to print"

What is your operating system? Reader version?

How can I stop Firefox 4 from displaying "The document cannot change while Printing or in Print Preview" from appearing every time I click on File/Page Preview?

Clicking on File/Page Preview in Firefox 4 brings up a warning dialog "The document cannot change while Printing or in Print Preview" every time. How can I stop this from happening? It is very annoying, and it is necessary to click "OK" on this dialog twice before it will go away. Thank you.

Does it behave that way in [[Safe Mode]] ?
If it doesn't, then one of your add-ons in the culprit.

I'm trying to print a custom envelope fro address book and keep getting the message No Pages were selected from the document.

I'm trying to print a custom envelope from Address book using one of my groups. I keep getting a No Pages were selected message. Anybody have any Ideas?

Hello, I find that only entries with Home or Work filled in with an address will show.
Might try right clicking on this link & saving Apple's Addy, then import this vCard, select it & see if it shows one envelope...
http://web.fastermac.net/~bdaqua/AppleComputerInc.vcf

After installing lion and updating to pages 4.1 cannot view my document content after I open the document. Shows how many pages I have and how many words in word count, but no words...

after installing lion and updating to pages 4.1 cannot view my document content after I open the document. Shows how many pages I have and how many words in word count, but no words...

Same problem. Tried reinstalling Pages. Didn't help. The behavior is like I am typing with a white font on a white background, but I am not.

I have been working on a document in Pages 4.3 and now it tells me I can not open the document unless I upgrade to Pages 5.2. When I look up Pages 5.2 the App store says "installed" nor can I find a "purchase" or "install" button.

My OS is 10.9.3.I've been working on a document in Pages 4.3. Now is says I can not open the document unless I upgrade to Pages 5.2. The Pages 5.2 page in the App store says "installed" nor can I find a "purchase" or "install" button. How do I get Pages 5.2?

If you have already updated to Pages 5.2 on your Mac, you may be trying to open the file with a previous version of Pages. If this is the case, you have two versions of Pages on your Mac & are trying to open Pages 5 documents with Pages 4. Are you launching Pages from an icon in your Dock? Installing the update does not change the Dock icons & it does not remove the older versions. Go to your Applications folder & launch the new Pages from there then right-click on the Dock icon & select Options > Keep in Dock.
Installing new versions of iWork has never replaced existing versions. This is nothing new. The only thing new is that the '09 apps are moved to an iWork '09 folder if they were purchased from the Mac App Store. If they were installed from disk they should already be in a separate folder in Applications.

Got prompt "the location of the document cannot be determined" then presentation GONE!

I'm freaking out! I hope someone can help.
I started getting the prompt "the location of the document cannot be determined" as well as asking me where the movie "VIBCPart1" was, which I thought was odd, as that was the name of the presention - not a movie file. Then Keynote froze - that is, I couldn't save anything and it making me force quit it, and I did.
When I went back to open it the entire preso was just gone - not in the folder at ALL. I did a search - nothing. I do have a duplicate for a backup but I did 12 hours of work on this project today - and I use Backblaze so Time Machine was turned off. And yep, there is some kind of problem with Backblaze! I await their response at this point.
I have a lot of videos in my Keynotes - I often split my presentations up into smaller parts because of that to avoid huge files. I suspect this one got big. In any case, if anyone has any ideas on recovery and how to avoid in the future, I'd be very grateful! Thank you in advance!

Only lately this started to happen to me as well. Problem happens in all iWork applications. Fortunately the apps never locked up completely.
When I try to save a document, I get the dialog that the location could no be found and whether I want to Save As... When doing a Save As the original file is still there and the dialog prompts for overwrite permission. I could save my documents. Just the other day Keynote magically found the document location again when I cancelled the dialog and then right clicked on the document title. The path to the document is correctly listed. I clicked the enclosing folder name on the popup (which did not open, resp. the Finder did not come to front), but a subsequent Save (command-S) worked
Very strange and deeply troubling.
Another observation: after it happended some days ago I ran Disk Utiltiy Verify and it found some problems, which I repaired successfully. Just now I had the very same issue again and right away ran a disk verify. AGAIN issues with the disk (Incorrect block cound for a file, volume bitmap needs minor repair for orphaned bocks, invalid volume free block count). Could this be SSD related (MBP Retina with 750GB original Apple SSD)?
Edit: some typos corrected

Solar01 "Message no. SOLAR_DOC020" The document cannot be edited

Hi!
I am configuring the business processes via SOLAR01 and receive the error "The document cannot be edited" Message no. SOLAR_DOC020.
It is also not possible to load the templates.
<b>Has anyone experience by solving this problem or some useful SAP note?</b>
Thank you very much!
regards

Hi!
I think it does not connection with the GUI version, because I cannot edit the Word-documents in the transaction SOLAR01.
I can edit .txt-files, but I cannot edit the .doc-documentas.
I have SAP GUI 7.10
Thank you!

SOLAR02 The document cannot be changed

Hello,
I have developed a program that uploads files massively to Solution Manager, and the upload process works fine.
But when i try to edit a document that i uploaded using this program, the systems shows me this popup message.
The document cannot be changed.
Because:
it was copied from a template.
it was copied from the Business Process
Repository.
it is saved in a different context.
The document is flagged for copying, e.g.
because you are in a copied project.
<ZH>It has been copied.</>
The reference to the original document is
replaced by a reference to the copy.
Has anybody seen this before or why is this message being showed.
Kind regards
Jon
Edited by: Jon Azkorra on Dec 17, 2011 2:09 PM
Edited by: Jon Azkorra on Dec 17, 2011 2:15 PM
Edited by: Jon Azkorra on Dec 17, 2011 4:30 PM

Hi Rajat,
Sorry for the delay, I was out of office.
If you really wish to switch off this protection you can use report SM_FOLDER_NO_REFCOPY. Please see note 1236369 for details
In your case you would need to add the 'Technical Folder Name' SOLAR00 using the report Start report SM_FOLDER_NO_REFCOPY At 'Technical Folder Name' enter SOLAR00 and press the add button this inserts a new entry in table IWBSETTING. You should find in this table afterwards and entry with NAME = SM_FOLDER_NO_REFCOPY and VALUE = SOLAR00
Afterwards when you try to change the documents (or their attributes) from within the implementaion project the document should not be copied anymore
But please ba aware of the fact when using this that as of then the original document in the template can be changed from within every project type.
bets regards,
Fabrcius

Message no. SOLAR_DOC021: The document cannot be displayed

Hi All,
When I am trying to display a document attached to a roadmap, (by double-clicking on it or by clicking the display button) I get the following Error Message: SOLAR_DOC021: "The document cannot be displayed"
As adittional information the roadmap is customer specific, The document has not been checked out and we are working on SP16.
Any hint?
Thanks,
Miguel

Hi,
Some possibilities;
could it be that you are using Sapgui 7.10 with Patchlevel 0?
(i mean no patch applied, just the initial release)
Unfortunately there was a bug in the intial release of Sapgui 7.10
(Patchlevel 0), which was solved with patch 1 for Sapgui 7.10.
The problem was that the access to the windows registry failed using
function from CL_GUI_FRONTEND_SERVICES.
But this is needed for opening documents, as the application looks into
the windows registry to determine which fronted application should
be started for displaying/editing the document.
Could you please install Patch >= 1 for Sapgui 7.10 and check whether
the problem is resolved afterwards?
note: #1023083 Registry functions did not work
Hope this helps.
Cheers,
sh

The document cannot be printed. No pages were selected to print.

Similar Messages

Maybe you are looking for