The document is on a volume that does not support permanent version storage

Hi All
I am using Mountain Lion version and i am receiving The document is on a volume that does not support permanent version storage when trying to save a text file on to my QNAP ( Netwrok Storage).
I have done littel research and aparently this is to do with MAC OS, how ever i was wondering if anyone know any ways around this ? or will this be fixed  ?
Thanks in adavance.

Mate
That is not what i am saying, if you read my post you will see that this USE to work and it stoped working since mac os 10.8
This does seem to be Apple problem if you read this article
http://support.apple.com/kb/TS4218
the issue i am having is this .
if i create a text file in windows with notepad and save it on a nas drive.
inside a text file i will have
this is a test
i go to my mac open the text file with textedit and add following text in new line
this is test 2
now i go back to windows box open same text file you will see that following
this is a testthis is test 2
basicly what it does it puts it on same line as the first line.
and this all use to be fine before 10.8.2
I am sorry if i came across rude i just need some help.

Similar Messages

  • The document "PP_CS_Higher Education_USA_V1" is on a volume that does not support permanent version storage.

    The document “PP_CS_Higher Education_USA_V1” is on a volume that does not support permanent version storage. Not sure what this means exactly.
    Any thoughts out there?

    This error is is usually encountered when trying to update a file that has been opened from a CD or DVD disc.
    Move the file to the desktop before you open it.
    Where is this file stored, a CD or DVD, external  hard drive, USB memory ?

  • The document "test1" is on a volume that does not support permanent version storage. Your changes have been saved and you will not be able to access older versions of this document once you close it. To undo your changes, click Revert.

    I have created share points on the mini mac server HD hard drive as we previously had issues with the server HD share points and security. This has all been working fine until recenrly and this error message keeps appearing evry time you want to save a document. Is it linked to the fact i have created a new folder on the HD drive and used that folder as a share point for all users to save to? Any help apprecisted thanks.

    Great thank you. I assume I cant add a /.DocumentRevisions-V100 to the share point?
    Would you mind explaining this issue also? I seems obvious but I just want to be certain. The error meassage reads;
    The document "Chester" could not be autosaved. The file has been changed by another application.
    Click Save Anyway to keep your changes and save the changes made by the other application as a version, or click Revert to keep the changes from the other application and save your changes as a version.
    Does it mean another application as in another user on the SHARE POINT folder and the document "Chester"  has opened this document ? Or does it mean another application as in pages and numbers? either way

  • Why do I get  this error message "This volume does not support permanent version storage."

    I get this error message when I save a "pages 09" document edited on my macbook pro but saved to my mac mini (over a wifi network). All my Macs are running 10.9.3. My Mac mini is using time machine to back up to a separate hard drive (USB 3 connection). I Tried using Page 5.2 but it is a disaster over my network, slow, crashes, creates random folders....

    According to Apple network volumes do not support built in 'versions'…
    OS X Server: "The document 'file name' is on a volume that does not support permanent version storage" alert
    If in doubt Google the error text with any personal info removed.
    Work on it locally & copy it to the network daily if you need versions, otherwise use a real 'version control system' that you have some actual control over like GIT. It is designed for code projects, but you can cram anything in if you really want.
    http://www.git-scm.com
    I suspect Apples file format will make it miserable with Pages, but there are some great Mac GIT apps.
    Using Time Machine would be probably be suffice (run it on the Mac you use as the server & then restore versions on that Mac).

  • The files are on a volume that does not support Trash- Mountain Lion CC-Lr5

    I'm trying to delete files in Lr5-CC and I'm running Mountain Lion My files are on an external portable HD.  I'm getting a message that says: "The files are on a volume that does not support Trash." Does anyone know why this happens and how to fix it?  Thank you

    Hello,
    This reply is months late, but hopefully it'll help you or someone else searching with this problem. I was having the same problem and found a way to get rid of it (permanently, it seems so far). The diagram below shows the steps I took in detail.
    Note: This seems to especially be a problem if your photo files on the same disk as a Mac OS installation or bootable backup.
    Hope this helps:

  • "The files are on a volume that does not support Trash. Would you like to permanently delete the item?"

    Suddenly I've started getting the error "The files are on a volume that does not support Trash. Would you like to permanently delete the item?.
    iMAC OSX 10.9.4.
    LR 5.6,
    Camara Raw 8.6
    Any idea?
    Please Help Me...
    Thanks in advance
    Jose

    This is how I solved it, thanks to combined information posted on forums:
    1. Got a new external hard drive formatted for Mac (I was using read-only Windows from my PC)
    2. Created a folder in new external drive >imported to LR->send to trash- empty trash
    3. The above was still not working until I noticed one day magically the missing picture icon started to show up in LR
    4. I went to the "set as rejected"pictures> locate missing pic (and nearby ones)
    5. Selected the pics -photo>remove> delete from disk
    Done!!!
    Thanks to the hours spent on searching different threads, and to the relentless users because LR never provided any kind of support or formal response to solve this by just letting users to getting lost in frustration .

  • The files are on a volume that does not support trash message that appears with Lightroom 3

    When I try to delete photos on LR3, this message appears.  This did not happen when I first installed this over a year ago.  How do I fix this?

    I contacted Adobe support, I was told to rename my preference files for lightroom, I did, and then I ended up with the original plist files and the renamed ones, and the same problem.  The guy I talked to at Adobe said that this was an issue with Mac/Lion.  I then contacted Apple, who said that this was not their application and that there was nothing they could do.

  • Xcode is running from a volume that does not support ownership. Please move Xcode to one that does.

    I have Problem,  I can't install Xcode 6.1 on my iMac due "Xcode is running from a volume that does not support ownership. Please move Xcode to one that does."
    I have two HD partition, First one I use for my Lion OS, and the second I just installed Yosemite since Xcode 6.1 need OS upper than lion.
    Here's my HD Info.
    Mac HD : Yosemite
    Machintosh HD: Lion
    I do try to uncheck and check when I install Xcode. Maybe I don't know where should I put Xcode.dmg when I want to install.
    Thank you. Sorry bad english.

    Run Disk Utility select the volume you are installing Xcode on and look at the bottom of the screen and make sure Owners Enabled: says yes.
    Also make sure there are no other versions of Xcode anywhere on your system. If there are delete them all and then do a fresh download and install of Xcode, BTW why are you nor installing from the Mac App Store, where did you get the dmg from?
    post back if that does not resolve the issue.
    regards

  • Xcode: volume that does not support ownership

    I just tried to install the latest Xcode which, after installing its components, flashed this warning:
    "Xcode is running from a volume that does not support ownership. Please move Xcode to one that does."
    Any clue what's up with that and how to fix it? If this is a permissions issue, I haven't had any difficulties related to permissions for quite awhile.
    Thank you!
    ray

    Run Disk Utility
    Select the boot disk (usually called Macintosh HD)
    In the File Menu select 'Get Info'
    Scroll down the list and look for 'Owners Enabled', this should say yes but if it says no might explain your problem
    If you are running Xcode from a volume other than your boot disk repeat the above for the appropriate volume to find the same answer
    Now assuming the answer is that the respective volume has 'Owners Enabled' set to no i.e. off, then this needs fixing, for a volume other than your boot drive this is fairly easy
    Go to the Finder
    Select the volume - not a file or a folder
    Go the File Menu and select Get Info
    Look at the bottom of the Get Info window for the option 'Ignore ownership on this volume'
    You need to first 'unlock' the Get Info window by clicking on the padlock symbol and entering an admin password
    Then make sure the 'Ignore ownership on this volume' option is not ticked
    If it is your boot volume then the process is different. You are probably going to either need to boot from a different volume to do it, or you are going to have to do it via Terminal.app. If your doing it via Terminal you first need to find out the device name for the volume. You would do this by typing
    diskutil list
    Typically your boot disk is going to be something like /dev/disk0s2 once you have found the right one then the next command would be
    sudo diskutil enableOwnership /dev/disk0s2
    assuming that /dev/disk0s2 is the right choice.

  • I need to access a website that does not support any versions of Firefox beyond 3.x, how can I downgrade my webbrowser so I can access that site?

    I recently upgraded to Mozilla Firefox 4.0.1 and now I cannot access web applications (Momentum from CGI Federal) that are only compatible with version 3.x. Is there a way to downgrade my version or run two different versions on one computer? If I can't downgrade I will need to run IE as my primary web browser.

    You can use the portable Firefox version for such sites.
    See http://portableapps.com/apps/internet/browsers/portable_firefox

  • You must have connected the Time Capsule with a router that does not work with my direct cable from my ISP

    you must have connected the Time Capsule with a router that does not work with my direct cable from my ISP

    I tried to answer in your other post.. please stick to one thread ..
    What method of internet do you have.. is this fibre install.. if so the TC should just plug in and use dhcp in router mode.. press and hold the reset and it will go back to router mode by default.

  • I download the recent ios for iphone 4 and connected to my pc and it wont connect to itunes. What is the lastest version of itunes that DOES NOT support ios 7?

    i download the recent ios for iphone 4. i connected iphone 4 to my pc and it wont connect to itunes. What is the lastest version of itunes that DOES NOT support the lastest version of ios?

    Yes, due to Incomplete Software Update on your iPhone your Device is now in Recovery Mode and you cannot take a Backup now. But if you have taken a backup earlier then you can Restore that backup on your iPhone after you Reset your iPhone to Factory Settings.

  • Problem creating new sites. The formula refers to a column that does not exist

    Good morning,
    I have a problem creating new sites in my development environment. We have a template which works properly when we create new sites with it. However, when we add one new content type in the site created and save it as a new template, we can't create new sites
    with this template. The error log is that there are one problem in one column [The formula refers to a column that does not exist.  Check the formula for spelling mistakes or change the non-existing column to an existing column]. 
    I have opened the wsp template with visual studio but I can´t discover what column is the problem because the log only refers to the feature (ListInstances).
    Anybody knows how to find my problematic column?
    The error is:
    Feature Activation: Threw an exception, attempting to roll back.  Feature 'plantilla Llave en Mano 20141222 v2ListInstances' (ID: '6c61a3bf-3c51-4064-958b-d154729233e7').  Exception: Microsoft.SharePoint.SPException: La fórmula hace referencia a una
    columna que no existe. Compruebe que la fórmula no tiene errores ortográficos o cambie la columna que no existe por otra que exista. ---> System.Runtime.InteropServices.COMException (0x81020057): La fórmula hace referencia a una columna que no existe. Compruebe
    que la fórmula no tiene errores ortográficos o cambie la columna que no existe por otra que exista.     at Microsoft.SharePoint.Library.SPRequestInternalClass.UpdateField(String bstrUrl, String bstrListName, String bstrXML)     at Microsoft.SharePoint.Library.SPRequest.UpdateField(String
    bstrUrl, String bstrListName, String bstrXML)     --- End of inner exception stack trace ---     at Microsoft.SharePoint.Administration.SPElementDefinitionCollection.ProvisionListInstances(SPFeaturePropertyCollection props, SPSite site,
    SPWeb web, Boolean fForce)     at Microsoft.SharePoint.Administration.SPElementDefinitionCollection.ProvisionElements(SPFeaturePropertyCollection props, SPWebApplication webapp, SPSite site, SPWeb web, SPFeatureActivateFlags activateFlags, Boolean
    fForce)     at Microsoft.SharePoint.SPFeature.Activate(SPSite siteParent, SPWeb webParent, SPFeaturePropertyCollection props, SPFeatureActivateFlags activateFlags, Boolean fForce)
    Thanks in advance

    Hi Enrique,
    According to your description, after added a content type into the new site and save the site as a template, there is an issue when creating another new with the newly
    site template.
    Based on the error message “The formula refers to a column that does not exist…”, seems that it would be an issue of a Calculated column in the content type you added,
    please go through all the Calculated column in that content type to see if the formulas all work well.
    Feel free to reply if there any progress.
    Best regards,
    Patrick
    Patrick Liang
    TechNet Community Support

  • How to syncronize an iphone5S within a Macbook 10.5.8 that does not support the lattest version of ITunes?

    Does somebody know how to syncronize an iphone5S within a Macbook 10.5.8 that does not support the lattest version of ITunes?

    Macintosh System Requirements
    Mac computer with an Intel Core processor
    OS X version 10.6.8 or later
    400MB of available disk space
    Broadband Internet connection to use the iTunes Store
    You need to upgrade your OS X before installing the latest version of iTunes.  Then you will be able to sync your 5S.

  • Error when trying to re-mount a VHDx (the version does not support this version of the file format)

    Hi,
    I have a vhdx on a NAS that I use for server backup. I created the VHDx via disk management, mounted it and assigned drive letter X. I now created a script that gets triggered upon startup via task scheduler to remount the VHD. If I try to mount it however,
    it tells me this:
    No matter what I try, I can't mount it. Double clicking just says this:
    Eventviewer spits out error 137: The default transaction resource manager on volume X: encountered a non-retryable error and could not start.  The data contains the error code.
    How do I trouble shoot this? oO Originally I had created the VHD as expanding, where now I recreated it at it's full size of 900GB. Maybe that will make a difference.
    Thanks for the help
    Cheers
    Maike

    Hi Maike,
    Do you mean that you can mount the VHDX via disk management but cannot mount it via a script? If so, please provide the diskpart’s mount commands in the script.
    In the meantime, check if destination partition is NTFS formatted.
    Problem with Attach VHD function: The version does not support this version of the file format
    http://www.paulauskis.lt/2010/03/problem-with-attach-vhd-function.html
    Please Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
    Best Regards,
    Mandy
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
    Hi Mandy,
    I can not mount it after a reboot. So I create the VHDx via disc management and attach it afterwards without problem. After the server reboots and the attached VHDx dropps, I can't remount it. Gives me the errors I posted above.
    As I had mentioned above, I recreated the VHDx at it's full size this time, rather than expanding. That worked just fine and I can remount after reboot.
    So I consider this dealt with ;)
    Thanks anyway!

Maybe you are looking for

  • My iPod is no longer connecting to the computer...

    I think my iPod is dead. If it is, I'm seriously going to cry. It's the 4th gen model with the 40gig harddrive. I have tried multiple times to connect my iPod to both my iMac and my PC. It won't connect... on my Mac, it doesn't even show up at all. O

  • Goods Receipt for Inbound Delivery through MIGO

    Hi All, Can anyone pl. explain me in steps the process of GR for Inbound Delivery from MIGO transaction. Also I need the process of reversing this goods receipt done. For certain inbound deliveries a dump occurs in the program SAPLIE01 in 'EQUIPMENT_

  • Reader extend pdf form in designer?

    is it possible to reader extend a pdf form in designer? i did it in adobe acrobat pro trial version, via advanced/extend features in adobe reader  but the form is not sending anything to my SOAP endpoint.. it works fine when opening the pdf in adobe

  • Can a single servlet process 2 diffrent jsp pages?

    I am kinda new to the jsp world. Here is the question i have. I have 2 jsp pages and a sigle servlet class. Both the jsp pages need to be processed by the same servlet. The servlet needs to run diffrent logics based on which jsp the request is being

  • How to create html files using Swing

    I am developing a billing system in java. I want to generate cash memo and other related documents in HTML format. I have explored html package in swing but without result. Please help me. Arshad