The document "test1" is on a volume that does not support permanent version storage. Your changes have been saved and you will not be able to access older versions of this document once you close it. To undo your changes, click Revert.
I have created share points on the mini mac server HD hard drive as we previously had issues with the server HD share points and security. This has all been working fine until recenrly and this error message keeps appearing evry time you want to save a document. Is it linked to the fact i have created a new folder on the HD drive and used that folder as a share point for all users to save to? Any help apprecisted thanks.
Great thank you. I assume I cant add a /.DocumentRevisions-V100 to the share point?
Would you mind explaining this issue also? I seems obvious but I just want to be certain. The error meassage reads;
The document "Chester" could not be autosaved. The file has been changed by another application.
Click Save Anyway to keep your changes and save the changes made by the other application as a version, or click Revert to keep the changes from the other application and save your changes as a version.
Does it mean another application as in another user on the SHARE POINT folder and the document "Chester" has opened this document ? Or does it mean another application as in pages and numbers? either way
Similar Messages
-
If I Change my apple ID and email, will I be able to access my old purchases with the new apple id?
After opening the email it shoud of had you enter the Apple ID and password. Using certian web browser's can cause errors. You can adjust securty settings (big pain) or you use another browser. Using Firefox or Safari should do the trick.
Let me know if using Firefox or Safari resolved it. -
i have acrobat standard and it will not allow me to edit.. every file i go to open it says "there is a active file open and must close in acrobat" other times it says account cannot be validated after I have already paid for it.. please advise
Hi Timothy,
The account cannot be validated error was due to a glitch on our activation server that has been fixed now.
Please try using acrobat now and check if you are still facing the problem.
Regards,
Rave -
My HD died on my iMac. I replaced it and lost everything that was on it. I found my source disks from my original purchase for Final Cut Express HD 3.5. I now have Maverick ISO and it will not let me load my software so I can continue my film work. How do I get it too recover it without paying for it again since I paid for it already and have projects in progress that need to be completed?
1) Partition your hard drive or add an external drive and install Snow Leopard (with the Optional Rosetta) into it and then you can dual-boot (System Preferences:Startup Disk) into Snow Leopard and run FCE 3.5 there.
2) Use one of the following methods to install FCE 3.5 into Mavericks:
a) Pacifist: http://www.charlessoft.com/
b) Jeremy Johnstone's Terminal method: http://www.jeremyjohnstone.com/blog/2012-03-11-installing-final-cut-pro-studio-2 -0-on-mac-os-x-10-7-lion.html
Reports on this forum seem to confirm that Final Cut Studio 2 will continue to operate in Mavericks once it is functionally installed, albeit some plug-ins may fail to function. FCE 3.5 is the same generation as FCS2, and presumably will continue to operate in Mavericks, as well. -
I have an older version of iTunes on my office computer and it will not allow me to upgrade to the newer version without an administrative password. How can I get around this???
If you have an iBook G4, (PPC) you can't do much.
But if that is a MacBook (intel) you may be able to
upgrade the OS X, if the hardware is up to it...
Since there were about nine different build models
of MacBook (not powerpc iBook) to identify what
one you have would be the first step to knowing
what OS X and RAM upgrades it could use.
If the computer is not already at OS X 10.6.8,
it can't go online to get or use OS X 10.7.5. So,
when you more accurately describe the 'Book,
detailed information is available.
When you find the serial number, there is a web
page that can be used to identify by serial no.
http://www.powerbookmedic.com/identify-mac-serial.php
That'd be a first step. Or even the Model number
which should be visible on the outer case by hinge.
Good luck & happy computing! -
I have just bought a MacBook Air and i cannot play videos from the internet as it asks for a flash player to be installed i try to download Adobe flash player and it will not allow me to do so?
Ziatron is correct that Flash does not work on an iPad, but it does work on a Mac. See Adobe Flash Player 11.2.202.160.
-
I have an iphone5 and it will not charge. the icon says its fully charged when its plugged in but the battery is steadily decreasing. i need some help
This is often a feature of faulty battery. Try to Restore your iPhone with iTunes on your computer. See if better. If still problem, make Genius reservation or set up Service and take or send your iPhone to Apple for resolution under Warranty.
-
I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank. I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Yosemite. Please help!
Check out this thread: Downloaded Lightroom CC but only get a quick flash of the startup screen then nothing, Lightroom 5 still working.
-
HT204053 What should I do when I changed my apple password and apps will not except it?
What should I do when I changed my apple password and apps will not except it?
Find out what apple id was used to purchase those apps and use that password.
-
My ipad is frozen with the not enough storage box up. I have tried a hard reboot and it will not respond to anything... help!
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
I want to go back to the older version of Mozilla. The new version does not support alot of the programs that I used daily, like my Kaspersky Password Manager (which is essential), I can't remember all of my usernames and passwords. If I can't use this feature, then I don't want the new version. How do I go back to the older version? Otherwise, I'll be forced to use Internet Explorer.
Due to security vulnerabilities, rolling back to Firefox 4.0.1 is not recommended. Firefox 3.6.18 would be the safer choice.
Here's the process to roll back:
First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, download and save Firefox 3.6 to your desktop for future installation. http://www.mozilla.com/firefox/all-older
Close Firefox 5.
You could install Firefox 3.6 over it (many have reported success) or you could uninstall Firefox first. If you uninstall, do not remove your personal data and settings, just the program.
Unless you have installed an incompatible add-on, Firefox 3.6 should pick up where you left off. If there are serious issues, please post back with details.
Note: I haven't actually tried this myself! -
I keep getting the error that nothing was imported due to files or folders selected to import did not contain any supported file types or the files are already in this catalog. It started two days ago ( I have had elements 13 for about 6 weeks now) after I put my photo card in to download as usual. I have used photoshop elements for years and know what I'm doing. I also have Photoshop 12 that works just fine and will download these same files with no issues. I am using hp laptop and windows 8.1. Please help. I have thought about uninstalling and re installing but I have a lot of effects that have been added already and it is time consuming to do it again.Thank you for any advice
This is often a feature of faulty battery. Try to Restore your iPhone with iTunes on your computer. See if better. If still problem, make Genius reservation or set up Service and take or send your iPhone to Apple for resolution under Warranty.
-
Trying to change a permanent page in left margin of my website and it will not allow me
My website has a left hand margin that appears on all pages of my website, I can change any other area except for this one. Can anyone tell me how to edit, I want to remove an icon and redirect another. I am using Contibute CS3. Thanks
That depends.
If it is part of your site template(s), you cannot use Adobe Contribute to edit it. For that you would need an actual website editing tool such as Dreamweaver.
If it is part of an include file, assuming you have permissions, you could edit the include file itself and it will update on all your pages. -
Songs that have been bought from itunes will not play on iphone5
I have a new iphone 5 just updated today to new software. I have synced with laptp and put 35 songs on. I bought two songs from itunes store to set as ringtone but these two songs ONLY will not play. Can anyone suggest any reason for this?
If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items. -
I just got an ipod nano and noticed i had Itunes on my computer. My boyfriend had downloaded it for him a while ago on the computer with his own music. I went on the account and downloaded some music but it will not let me sync it to my nano. I believe that must be because it is his account. I went to the control pannel to uninstall the program (with his permission hehe) and re downloaded it. All of his stuff came back up. I am not able to sync anything to my nano thanks for any input!
Uninstalling and reinstalling iTunes has no affect on the media on the computer or the account it is linked to.
If the media was purchased under another iTunes account, then it is permanently tied to that account.
Using mulitple iDevices with one computer
Maybe you are looking for
-
What is difference between Service map iview and Workset Map iview
Hi Experts, Can anyone tell me the difference between service map iView and Workset Map iView. When I am creating these iViews, its seams both are same. I canu2019t find difference still, can anyone help me out of this Thanks in
-
This question was posted in response to the following article: http://help.adobe.com/en_US/acrobat/standard/using/WS58764944-1560-41fe-B533-BE0551D3DC38. w.html
-
hi friends, I have activated audit log and i can able to view log with SM20. But I have one doubt .......is that audit log occupies space in file system only (or) Database level only? or it occupies both? is it possible to get this audit log from any
-
Migrate from G4 to new Macbook.. Not your typical question
Good morning. My wife was using an iBook G4 for some time. Our 13 month old grandson one day made a quick move and pulled on the display, pulling it towards him. The machine now only shows a grey/white screen when booting. It sounds like it is starti
-
How to run a vi without using menu button on top
i got to execute or run the labview program without using the menu button.There should be a button on front panel clicking on to it must run the vi.