The document type does not match any of the given schemas

Hi,
I have created an envelope schema.To precisely process inbound envelope documents,in the xml disassembler component i have used the Documentspec and envelopespec properties.
in the properties i have the the schema name,Assemblyname
but i have got the error like The document type does not match any of the given schemas.
I have verified the schemas have deployed properly.
can you help me on this?

Hi Sujith,
As pointed out by Johns lot's of thing can cause this. You have to analyze lot of things, but this kind of error indicates that the message type that you are debatching is not deployed. For Example :
If you are debatching on Order than Order schema should be deployed in the admin console.
One more point that you need not to specifiy Documentspec and envelopespec properties until and unless there are multiple schema's of same message type deployed in different assembly. The dissasembler component will automaticaly disassemble the messages
just looking after the body XPATH.
Regards,
Rahul Madaan

Similar Messages

The document type does not match any of the given schemas. batching

I am aggregating messages(batching) in Orchestation by calling pipeline. I have send pipeline where I have standard assemble component and custom pipeline in encode to assign some values .
When I test it I get following error There was a failure executing the send pipeline: "Zones._870.Pipeline.Send870Pipeline, Zones.870, Version=1.0.0.0, Culture=neutral, PublicKeyToken=51b3a99d8425ff5a" Source: "ZonesAssignGUID" Send
Port: "SendToAX870" URI: "C:\File_Out\Ingram\870\%MessageID%.xml" Reason: The document type "http://schemas.microsoft.com/dynamics/2011/01/documents/Message#Envelope" does not match any of the given schemas.
Can somebody help me how to resolve this issue?

Yes this is configured schema as envelope schema. This one is deployed in biztalk . I tried whatever suggest below query and return one record. Not sure but looks like error message misguiding here.
select * from BT_DocumentSpec where msgtype like '%http://schemas.microsoft.com/dynamics/2011/01/documents/Message#Envelope%'

Output map: Document Type does not match any of the given schemas

On a send port, we have a map that uses a custom xslt. We were hoping to somehow design the map so the output was essentially a generic xs:any schema. But unless we ad a reference from our map assembly to the assembly that holds the actual schema for
the message pertaining to the map out put we get an error:
The Messaging Engine failed while executing the outbound map for the message going to the destination URL "C:\BizTalk\Test\%MessageID%.xml"
with the Message Type http://test#testmessage. Details:"Document type "outputtest#outputtestmessage" does not match any of the given schemas.
Is there a way to avoid having to have the reference?

Hi ,
In BizTalk messages are distinct from each other based on the message type . In your case http://test#testmessage (Namespace#RootNode)
Now coming to your case have you verified whether you have a schema type matching the response is deployed with the solution. The easy way is to look into specific BizTalk application schema node .
If not ,What you can do is to create a new schema for output having "TestMessage" as record and any element inside it. After that apply a mass copy
funtiod from source t destination(in your case any type schema created).
Thanks
Abhishek

Method 'publishCatalog' does not match any of the valid signatures for mess

When I run my client, I get "Method 'publishCatalog' does not match any of the valid signatures for message-style service methods" I know that it means that my web service method should conform to one of those 4 methods (http://ws.apache.org/axis/java/user-guide.html#ServiceStylesRPCDocumentWrappedAndMessage), and I made it conform, yet I still get that error.
Here's my Service and Client code:
import org.w3c.dom.Element;
import org.apache.axis.client.Service;
import org.apache.axis.client.Call;
import org.apache.axis.message.SOAPBodyElement;
import org.apache.axis.utils.XMLUtils;
import java.io.File;
import java.io.FileInputStream;
import java.net.URL;
import java.util.Vector;
public class CatalogPublisherServiceClient {
     public static void main(String[] args) throws Exception{
          String endpointURL="http://localhost:8080/axis/services/CatalogPublisherService";
          org.apache.axis.client.Service service = new Service();
          Call call = (Call)service.createCall();
          call.setTargetEndpointAddress(new URL(endpointURL));
          SOAPBodyElement[] reqSOAPBodyElements = new SOAPBodyElement[1];
          File catalogFile = new File("catalog.xml");
          FileInputStream fis = new FileInputStream(catalogFile);
          reqSOAPBodyElements[0] = new SOAPBodyElement(XMLUtils.newDocument(fis).getDocumentElement());
          SOAPBodyElement[] resSOAPBodyElements = (SOAPBodyElement[]) call.invoke(reqSOAPBodyElements);
          SOAPBodyElement resSOAPBodyElement = null;
          for(int i=0; i<resSOAPBodyElements.length; i++){
               resSOAPBodyElement = (SOAPBodyElement)resSOAPBodyElements;
               System.out.println(XMLUtils.ElementToString(resSOAPBodyElement.getAsDOM()));
import javax.xml.parsers.DocumentBuilderFactory;
import javax.xml.parsers.DocumentBuilder;
import javax.xml.soap.MessageFactory;
import javax.xml.soap.SOAPMessage;
import org.w3c.dom.Document;
import org.w3c.dom.Element;
import org.w3c.dom.NodeList;
import org.w3c.dom.Node;
import org.w3c.dom.Text;
import java.util.Vector;
import java.util.Date;
import java.text.SimpleDateFormat;
import org.apache.axis.MessageContext;
import org.apache.axis.utils.XMLUtils;
import org.apache.axis.message.SOAPBodyElement;
public class CatalogPublisherService {
     public SOAPBodyElement[] publishCatalog (SOAPBodyElement[] soapBodyElements) throws Exception {
          Element soapBody = (Element)soapBodyElements[0];
          NodeList productList = soapBody.getElementsByTagName ("PRODUCT");
     int productCount = productList.getLength();
     DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
     factory.setNamespaceAware(true);
     DocumentBuilder builder = factory.newDocumentBuilder();
     Document responseDoc = builder.newDocument();
     Element resRoot = responseDoc.createElementNS("http://www.axis03.ws", "CATALOGUPDATE");
     resRoot.setPrefix("CU");
     Element itemCount = responseDoc.createElement("ITEMCOUNT");
     Text itemCountText = responseDoc.createTextNode (String.valueOf(productCount));
     Element dateReceived = responseDoc.createElement("DATERECEIVED");
     SimpleDateFormat sdf = new SimpleDateFormat("MM/dd/yyyy");
     String date = sdf.format(new Date());
     Text dateReceivedText = responseDoc.createTextNode(date);
     //Append the child elements appropriately
     resRoot.appendChild(itemCount);
     itemCount.appendChild(itemCountText);
     resRoot.appendChild(dateReceived);
     dateReceived.appendChild(dateReceivedText);
     SOAPMessage message=null;
     MessageFactory msgFactory = MessageFactory.newInstance();
     message = msgFactory.createMessage();
     SOAPBodyElement[] result = new SOAPBodyElement[1];
     result[0] = new SOAPBodyElement(resRoot);
     return(result);

That's a really helpful answer and not smug at all, thanks Carey.
I just downloaded a DVD image from my university's MSDN Academic Alliance program, named "Microsoft
Windows 7 with Service Pack 1 Debug/Checked Build 64-bit (English)", which I wanted to use to install over an existing 32-bit version. I thought the install screen was giving this weird unskippable error described in the OP before I even entered
a key because the 32-bit key I had used on the HDD was somehow interpreted to be used in an upgrade, but no. Even after I wiped the hard drive, this error persisted.
Guess I'll go Google some more on how to install my legit copy of Windows, because this self-serving shit sure isn't helping.
edit: IF YOU GOOGLED THIS AND ARE STILL LOOKING FOR YOUR ANSWER, CHECK HERE:
http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_install/the-product-key-entered-does-not-match-any-of-the/47e6f575-5792-404b-9b7f-2065bdb91011

The version of iOS on does not match any of the versions of iOS supported for development with this installation of the iOS SDK

Getting this error message as of this morning: The version of iOS on “iPad” does not match any of the versions of iOS supported for development with this installation of the iOS SDK. Please restore the device to a version of the OS listed below, or update to the latest version of the iOS SDK. I've downloaded the latest SDK and gone through the usual turn off and turn on again for iPad and computer, removed and reinstalled the iPad from Organizer and have no idea how to make apps build now. I was prompted to update the iphone too but there's no way I'm updating it if this issue can't be resolved.

Okay these are the steps I took to solve the problem - they may not be the right ones for you but they've solved the problem and saved time hunting for some other solution. Firstly I changed my MAC system to Lion with the £20 download, then I deleted the old Xcode and installed the new version that is app based and doesn't support Snow Leopard, then all was well. I can now update my xcode via the app which is quicker and more logical and can update my iPhone rather than chug along avoiding updates as I need to update my existing apps on the app store and upload a new one.

Windows 8 error "product key does not match any of the Windows images available for installation"

Hi Experts
My HP Pavilion laptop came with window 8. I made the USB recovery for windows 8 using hp recovery manager. My windows was corrupted, while I was trying to install windows 7 in dual boot.
I used above USB recovery to restore factory default. But every time it is giving me error "HP Recovery Manager Failed error code = 0xefffff08"
Then I downloaded the OEM ISO mage for windows 8 and tried to do the clean install but now installation process is giving me error "The product key entered does not match any of the Windows images available for installation. Enter a different product key"
Please help me. To whom I have to contact?

Hi ghost-rider,
Thank you for your query, I will do my best to assist you.
I understand you tried to do a recovery and you received this error "oxefffff08".
First I would suggest you run a hardware diagnostics. Testing for Hardware Failures (Windows 8)
If no hardware failures are located, you have ruled that possibility out.
Here is a link to Troubleshooting HP System Recovery Problems (Windows 8) that may help.
If you are still having an issue doing a recovery, I suggest contacting HP support and explain the issue you are having with doing a recovery. They may have another option available for you.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region Technical Support Sitemap
The clean install from an OEM image is looking for the product code as it does not match the one that came with the computer, You would need a new code.
I hope this has helped.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

The product key entered does not match any of the Windows images available for installation. Enter a different product key.

how do you manage to install windows 7 when the message on the screen is "The product key entered does not match any of the Windows images available for installation. Enter a different product key. "

That's a really helpful answer and not smug at all, thanks Carey.
I just downloaded a DVD image from my university's MSDN Academic Alliance program, named "Microsoft
Windows 7 with Service Pack 1 Debug/Checked Build 64-bit (English)", which I wanted to use to install over an existing 32-bit version. I thought the install screen was giving this weird unskippable error described in the OP before I even entered
a key because the 32-bit key I had used on the HDD was somehow interpreted to be used in an upgrade, but no. Even after I wiped the hard drive, this error persisted.
Guess I'll go Google some more on how to install my legit copy of Windows, because this self-serving shit sure isn't helping.
edit: IF YOU GOOGLED THIS AND ARE STILL LOOKING FOR YOUR ANSWER, CHECK HERE:
http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_install/the-product-key-entered-does-not-match-any-of-the/47e6f575-5792-404b-9b7f-2065bdb91011

Edge Server Certficate does not match any of the supplied FQDNs

I'm having issues with a merged OCS 2007 R2 and Lync 2010 topology. I get a periodic event indicating there are Web conference connection issues betwen the Lync FEs and the OCS 2007 R2 Edge servers. Three times a minute the Edge server tries to connect to
the FE pool and the following events are generated:
Event ID: 41026
Lost connection to all Web Conferencing Edge Services
Event ID: 41024
Lost connection to all Web Conferencing Edge Services
Investigations show that IPv6 can be tha cause of this issue, but I don't think that is the case here. When I dig into the logs I see the following on the FE servers:
Certificate did not match any of the supplied fqdns Returned HRESULT=800B0109
This seems to be saying that the FE has a prequalified list of Edge server it can talk to and this certificate FQDN isn't on the list. I know you add an authorised list of FE servers to the Edge server, but I'm not aware of anywhere you add the edge
server FQDNs to the FEs other than for federation and media paths.
The certificate associated with the internal Edge interface is from a public provider and hence there is an Entrust chain to put in place on the edge server.
Jed

OK, whilst writing up the post it triggered me to go and check whether the FE server actaully trusts the certificate from the Edge server. I tried importing the certificate chain tied to the internal interface of the Edge server and placing it in the stores:
Personal (computer): Edge certificate
Intermediate Certificate Authorities (computer): PKI Provide intermediate certificate
Trusted Root certificate Authorities (computer): PKI provider root certificate
This immediatley fixed my issue. So, the event message is misleading as it doesn't say it doesn't trust the certificate but that is the root cause of my issues.
I completed this task on all my servers and on one server I noticed the issue was solved as soon as I imported the Edge certificate, it didn't need the intermediate or root certificate at all which surprised me. I repeated another test just pulling in the
root and intermediate certificate and that also fixed the issue. So, you can fix the prolem in two ways:
1) Import Edge certificate to personal computer store
2) Import Root and Intermediate to the appropriate stores
Jed

Hey...... my ipod touch 2g wifi dose not work.... it connects to the network but does not open any of the web pages or internet acess!! HELP ME???

Someone plz help me out with this problemm... My IPOD TOUCH 2G connects to the wifi network but could not open any of the web pages... i've tried SAFARI, FIREFOX, and OPERA.... nothing in wifi retrieves data!!! it makes me so angry...
possible reasons???? i've searched net.. and many of the people r having these problems... maybe with the ne iOS4.2.1
HELPPPPPPPPPPP????
...Fateh

- Reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Power off and then back on your router
- Reset network settings: Settings>General>Reser>Reset Network Settings
- The troubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections
- Does the iPod successfully connect to other routers?

I had windows 8.1 but want to go back to windows 8 with clean install"the product key entered does not match any of the windows image available"

I had windows 8.1 and wanted to revert to windows 8 so i by mistake formatted the c:/ drive containing os and now when i try to install windows 8 i get the error "The product key entered..."
And i dont even have recovery image in my pc. I am using a dell laptop and i have windows 8 dvd given by dell which reads" windows 8 recovery media for windows product"
Please guide me asap.

OEM keys are embedded on hardware, you might not need to enter the key in your case. I would suggest you to call Dell support here.
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

HT5127 I had one day left on my trial version of final cut pro x so decided to purchase the full version. Now I have both versions and the full version does not have any of the events or projects in it. What can I do?

Please help.

Patricl, please answer Russ's question; and fear not, deleting or installing a version of FCP X does not delete or move any of your media or projects.
If the trial was from an older version (10.0.x), there is a necessary update procedure. 10.1.x uses libraries to organize your content, and the older stuff must be converted to the new organizational scheme, but it is well worth it.

RMAN - specification does not match any archived log in the repository

Hi All,
Oracle 11G R2 on WIndows woo8 R2 Std Edition
I am running RMAN (almost for the first time), and i am using a script previously used. As i am checking through the log, i notice some 'errors' though the backup finishes successfully.
RMAN> crosscheck archivelog all;
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=352 device type=DISK
specification does not match any archived log in the repository
RMAN> crosscheck backupset;
using channel ORA_DISK_1
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=D:\ORACLE\DATABASE\ORADATA\MMSPRD7\ORAFRA\MMSPRD7\BACKUPSET\
2013_04_23\O1_MF_NCNNF_TAG20130423T134331_8QFL24F7_.BKP RECID=16 STAMP=813505412
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=D:\ORACLE\DATABASE\ORADATA\MMSPRD7\ORAFRA\MMSPRD7\BACKUPSET\
2013_04_23\O1_MF_ANNNN_TAG20130423T134334_8QFL26K1_.BKP RECID=17 STAMP=813505414
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=D:\ORACLE\DATABASE\ORADATA\MMSPRD7\ORAFRA\MMSPRD7\BACKUPSET\
2013_04_23\O1_MF_NCNNF_TAG20130423T134423_8QFL3S48_.BKP RECID=18 STAMP=813505465
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=D:\ORACLE\DATABASE\ORADATA\MMSPRD7\ORAFRA\MMSPRD7\BACKUPSET\
2013_04_23\O1_MF_ANNNN_TAG20130423T134427_8QFL3V9J_.BKP RECID=19 STAMP=813505467
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=D:\ORACLE\DATABASE\ORADATA\MMSPRD7\ORAFRA\MMSPRD7\BACKUPSET\
2013_04_23\O1_MF_NNNDF_TAG20130423T134428_8QFL3XDT_.BKP RECID=20 STAMP=813505469
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=D:\ORACLE\DATABASE\ORADATA\MMSPRD7\ORAFRA\MMSPRD7\BACKUPSET\
2013_04_23\O1_MF_NCSNF_TAG20130423T134428_8QFM4C5S_.BKP RECID=21 STAMP=813506507
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=D:\ORACLE\DATABASE\ORADATA\MMSPRD7\ORAFRA\MMSPRD7\BACKUPSET\
2013_04_23\O1_MF_ANNNN_TAG20130423T140148_8QFM4DOT_.BKP RECID=22 STAMP=813506508
Crosschecked 7 objects
RMAN> crosscheck copy;
released channel: ORA_DISK_1
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=352 device type=DISK
specification does not match any datafile copy in the repository
specification does not match any control file copy in the repository
specification does not match any archived log in the repositorySo there are 2 instances of the errors:
1) crosscheck archivelog all - when the error happens here, i think this means that there are no archived redo logs in the archivelog destination?? ..or something to that nature.
2) crosscheck copy - not sure what the other errors mean here.
Thx in advance!

1) crosscheck archivelog all - when the error happens here, i think this means that there are no archived redo logs in the archivelog destination?? ..or something to that nature.
2) crosscheck copy - not sure what the other errors mean here.
specification does not match any archived log in the repositoryI don't see the error here, it's only a msg that mean : There is no files on XXX destination, which is normal when no files found.

I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out wh

I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out what is going on? We have it set on auto renewal so I know its not that we haven't renewed this subscription, because we pay automatically.

Hi olivias,
It sounds like there may be some confusion on your system about what application should be associated with PDF files. You can reset filename associations by following the steps in these articles (depending on your operating system):
How to change the default application for a file type | Macworld
http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7
Please let us know if you have additional questions.
Best,
Sara

Sharepoint error - Search Issue - The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+msbin1).

i see this error everywhere - In ULS logs, on site. On the site > Site settings > search keywords; I see this -
The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+msbin1). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>IIS 7.0 Detailed Error - 500.19 - Internal Server Error</title> <style type="text/css"> <!-- body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;background:#CBE1EF;} code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;} .config_source code{font-size:.8em;color:#000000;} pre{margin:0;font-size:1.4em;word-wrap:break-word;} ul,ol{margin:10px 0 10px 40px;} ul.first,ol.first{margin-top:5px;} fieldset{padding:0 15px 10px 15px;} .summary-container fieldset{padding-bottom:5px;margin-top:4px;} legend.no-expand-all{padding:2px 15px 4px 10px;margin:0 0 0 -12px;} legend{color:#333333;padding:4px 15px 4px 10px;margin:4px 0 8px -12px;_margin-top:0px; border-top:1px solid #EDEDED;border-left:1px solid #EDEDED;border-right:1px solid #969696; border-bottom:1px solid #969696;background:#E7ECF0;font-weight:bold;'.
I am facing issues in searching, my managed metadata service is not running, search results page throws internal error. Any Idea why this above error comes.
P.S: We use windows authentication in our environment.

Hi IMSunny,
It seems you have solved this issue based on your another post.
http://social.technet.microsoft.com/Forums/en-US/aa468ab0-1242-4ba8-97ea-1a3eb0c525c0/search-results-page-throws-internal-server-error?forum=sharepointgeneralprevious
Thanks
Daniel Yang
TechNet Community Support

Error consuming Web service - content type text/xml;charset=utf-8 of the response message does not match the content type of the binding

Hi all,
We are trying to interact with Documentum server through DFS exposed WCF which communicates through port 9443 and we are provided with documentum issued Public Key certificates. We have successfully imported the certificates in client machine and configured
the bindings as below in our .Net web application config file.
<system.serviceModel>
<bindings>
<wsHttpBinding>
<binding
name="ObjectServicePortBinding1">
<security
mode="Transport">
<transport
clientCredentialType="None"
proxyCredentialType="None"
realm=""
/>
<message
clientCredentialType="Certificate"
algorithmSuite="Default"
/>
</security>
</binding>
<binding
name="QueryServicePortBinding">
<security
mode="Transport">
<transport
clientCredentialType="None"
proxyCredentialType="None"
realm=""
/>
<message
clientCredentialType="Certificate"
algorithmSuite="Default"
/>
</security>
</binding>
</wsHttpBinding>
</bindings>
Also, we set the message encoding as MTOM and the wcf client object initialization code snippet is as below,
ObjectServicePortClient
serviceClient = new
ObjectServicePortClient(new
WSHttpBinding("ObjectServicePortBinding1"),
new
EndpointAddress(UriUtil.ObjectServiceUri));
if (serviceClient.Endpoint.Binding
is
WSHttpBinding)
   WSHttpBinding
wsBinding = serviceClient.Endpoint.Binding as
WSHttpBinding;
wsBinding.MessageEncoding =
"MTOM".Equals(transferMode) ?
WSMessageEncoding.Mtom :
WSMessageEncoding.Text;
serviceClient.Endpoint.Behaviors.Add(new
ServiceContextBehavior(Config.RepositoryName,
Config.DocumentumUserName,
Config.DocumentumPassword));
When we execute the above code, we are getting error message as below,
Exception: The content type text/xml;charset=utf-8 of the response message does not match the content type of the binding (multipart/related; type="application/xop+xml"). If using a custom encoder, be sure that the IsContentTypeSupported
method is implemented properly. The first 407 bytes of the response were: '<?xml version="1.0" ?><S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/"><S:Body><S:Fault xmlns:ns4="http://www.w3.org/2003/05/soap-envelope"><faultcode>S:VersionMismatch</faultcode><faultstring>Couldn't
create SOAP message. Expecting Envelope in namespace http://schemas.xmlsoap.org/soap/envelope/, but got http://www.w3.org/2003/05/soap-envelope </faultstring></S:Fault></S:Body></S:Envelope>'
Then, we changed the bindings as below
<system.serviceModel>
<bindings>
<wsHttpBinding>
<binding
name="ObjectServicePortBinding1">
<security
mode="Transport">
<transport
clientCredentialType="Certificate"
proxyCredentialType="None"
realm=""
/>
<message
clientCredentialType="Certificate"
algorithmSuite="Default"
/>
</security>
</binding>
<binding
name="QueryServicePortBinding">
<security
mode="Transport">
<transport
clientCredentialType="
Certificate"
proxyCredentialType="None"
realm=""
/>
<message
clientCredentialType="Certificate"
algorithmSuite="Default"
/>
</security>
</binding>
</wsHttpBinding>
</bindings>
We are getting another error message,
Exception: The client certificate is not provided. Specify a client certificate in ClientCredentials.
Any pointers on resolving this issue would be highly helpful.
Thanks

Hi Dhanasegaran,
As per your case, the corresponding details which may guide you to resolve this issue:
1. First of all, you can try to call the wcf service directly from the browser & check where it will point out the correct location.
2. In config file ,Set IncludeExceptionDetailInFaults to true to enable exception information to flow to clients for debugging purposes .
Set this to true only during development to troubleshoot a service like below :
<serviceBehaviors>
<behavior name="metadataAndDebugEnabled">
    <serviceDebug
      includeExceptionDetailInFaults="true"
/>
    <serviceMetadata
      httpGetEnabled="true"
      httpGetUrl=""
/>
</behavior>
</serviceBehaviors>
3. I suggest you to change that <security mode ="TransportWithMessageCredential"> instead of <security mode ="Transport">
for more information, refer the following link :
https://msdn.microsoft.com/en-us/library/aa354508(v=vs.110).aspx

The document type does not match any of the given schemas

Similar Messages

Maybe you are looking for