The download for update from 2.0.0.0 to 2.3.0.0 fails

I had exactly the same problem as you describe, except I did not also try the update through DM.
On the advice of some folks in another forum, I tried a different WiFi connection instead of my home WiFi connection. I went to a local bookstore and used their WiFi for the update, and it worked perfectly on the first try. I'm not sure why, as the download seemed to be successful at home, and the failure was during installation, but it worked. So give that a shot.

Similar Messages

Where is the download for updating acrobat pro from 9.0 to 9.5.5

I've got a new computer and installed CS4 (I know, and old old version). Default Acrobat Pro installed is 9.0. On my old PC, the version is 9.5.5. I can't seem to find the udpate that would move me from 9.0 to 9.5.5. Any ideas?

update by downloading the files directly and then applying them:
pre cc updates: http://www.adobe.com/downloads/updates/

HT6030 I downloaded Mail Update for Mac OS X 10.5.6 and was told it could not be installed because it was from an unidentified developer. Tried installing download from MailUpdate & advised the disk did not meet the requirements for update. Hmmmm.

I downloaded Mail Update for Mac OS X 10.5.6 and was told it could not be installed because it was from an unidentified developer. Tried installing download from MailUpdate & advised the disk did not meet the requirements for update. Expect it's due to being at 10.9.1. Mail is still teetering between dysfunctional and non-functional. Advice?

I'm not sure what "Mail Update for Mac OS X 10.5.6" is. Mac OS X 10.5.6 is Leopard, a system that is quite old at this point. There have not been any Mail updates for Leopard in quite some time. If you are trying to install some old Mail update for Mac OS X 10.5.6 in Mavericks, that won't work.
If you are trying to install the Mavericks Mail update manually, that's not necessary if you have updated through the App Store. If the App Store shows no updates, you don't need this. (The error message doesn't make sense, and may indicate some other problem with your system, assuming that you were downloading this update from Apple's site.)
I'd advise you to start a new topic in the Mavericks forum and describe the problems you are having with Mail. Be sure to include specifics, but try to avoid speculating on causes, as responses that may be related to an inaccurate assumption on your part can cloud the issue.

I downloaded an update from creative suite 5.5. to 6.0 and then switched computers for a few months. looks like all of the applications have not disappeared. maybe a trial was uploaded instead of the actual updates? anyway, i just want to get the applicat

i downloaded an update from creative suite 5.5. to 6.0 and then switched computers for a few months. now I am back using the original computer and it looks like all of those Adobe applications (both 5.5 and 6.0) have disappeared. Maybe a "trial" was uploaded instead of the actual updates? Anyway, i just want to get the applications back onto my computer. i tried to enter the serial numbers on my original packaging but systems side error message from Adobe says they were already "redeemed" (which makes sense bc I already downloaded the updates. Apparently there is no phone customer service for Creative Suite anymore. ARRGGG. Any and all suggestions welcome!
-Michele

there is no update from 5.5. to 6.0.
you could have upgraded from 5.5 to 6.0, but you would know that because you paid money.
assuming you paid no money for a 6.0 upgrade, you still have your 5.5 license. uninstall clean and reinstall 5.5 per http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

I currently have iTunes version 7 and I need to upgrade to version 10. I am afraid of losing all my music if I just download 10 and when I use the "Check for updates" in the version 7 help menu, it tells me the server cannot be contacted.

I currently have iTunes version 7 on my computer and need to upgrade to version 10 to sync my new nano iPod. When I tried the "check for updates" under the version 7 "help" menu, it said it could not contact the update server. I am afraid if I just download version 10 from the website, it will wipe out my music library. What should I do to upgrade?

Back up your music and install from the website. You probably won't need to do this, but if your library is erased, restore it from the backup.
(59049)

I am using Quicken 2007 (16.1.4) and had no problems before upgrading to OS 10.10 Yosemite. When attempting to download security updates from my financial institutions (UBS and Fidelity), I get the following error OL-290. Any fixes?

I am using Quicken 2007 (16.1.4) and had no problems before upgrading to OS 10.10 Yosemite. When attempting to download security updates from my financial institutions (UBS and Fidelity), I get the following error: Quicken could not connect to the server. Please try again later. [OL-290] I understand this is because of a mismatch between SSL certificates at the financial institutions and Apple's SSL certificate included with OS 10.10 Yosemite. Any fixes to this issue?

I have the same problem but Q for Mac 2015 does not meet my needs. Is there a fix for this problem?

I connected my iphone 4s that i unlocked for t-mobile. I plugged it into itunes, and it asked me to update to ios6. I accepted the download and update button. it told me it needed 8 hours. i closed my laptop. not shut down. i opened and it wants restorin?

I connected my iphone 4s that I unlocked for t-mobile. I plugged it into itunes, and it asked me to update to ios6. I accepted the download and update button. It told me it needed 8 hours. I closed my laptop, not shut down. I re-opened the laptop a few hours later, and it wants restoring?? Whats going on?! i want my iphone back! PLEASE HELP. I'M LOST!!! (I synced my iphone to my computer if that helps at all).

Yes, and, I try to restore. I have the T-Mobile sim card in it just to clarify. It will not let me get passed that, it does not accept the t-mobile sim card. i tried restoring it using wifi, cellular, and i cant get i tunes. I am scared that if i take the tmobile sim card out and put the at&t one in just to complete the restoration process that the iphone will lock again and not read the tmobile sim card, then all my hard work has gone for nothing. ( this whole process was caused by me trying wanting to empty my pictures onto my computer because i did not have any storage space left). <--- that may not be as important, but i included it just because.

Huge issue with battery and overheating in iOS 6.1.1 iPhone 4S and ipad new iOS 6.1 what I can do , I am very sorry for update from 5.1.1 it was the best

Huge issue with battery and overheating in iOS 6.1.1 iPhone 4S and ipad new iOS 6.1 what I can do , I am very sorry for update from 5.1.1 it was the best
My wife have iPhone 4 and ipad new is not updated it working good and my devices after update working bad :-(, likely the devices of my wife stay with 5.1.1

good thing i havent updated mine yet..

How may one cancel the download of an update that was started by having actuated the "Check for Updates" button in the "About Firefox" window, please?

How may one cancel the download of an update that was started by having actuated the "Check for Updates" button in the "About Firefox" window, please? If possible please cover all platforms, Mac, Windows, Linux, although the first mentioned is what currently applies to my circumstances.
Thank you.

Such a download is usually saved in an updates or updated folder in the Firefox program/application folder.
You can delete this folder to cancel the download.
If files already have been downloaded then remove the files in the updates and updates\0 folder.
*http://kb.mozillazine.org/Updates_reported_when_running_newest_version
*http://kb.mozillazine.org/Software_Update
Mac: /Applications/Firefox.app/updates "/path_to/Firefox.app/Updated.app"
Linux: "/path_to/firefox/updated"
Windows: C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates

TS1717 I started the download for the itunes update, but before it completed, it said there was an error. I then went to open itunes, and the message came up that it was not installed on my computer. Did I lose everything?

I started the download for the itunes update, but before it completed, it said there was an error. I then went to open itunes, and the message came up that itunes was not installed on my computer. Did I lose everything?

Hello llblake,
Fortunately, the process of installing or updating iTunes should not affect your library. The following articles can help with getting iTunes properly updated and stabilized.
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Cheers,
Allen

I need the download for the Security Update for Shockwave Player Active X 12.0.3.133

To Whom It May Concern,
I need the download for Adobe Shockwave Player Security Update for Shockwave Player Active X 12.0.3.133. So far all I have got is the run around. Please can someone help me get this update for my laptop?
Sincerely,
Lisa Newman

Is there a reason you need this SPECIFIC build? Because I was unable to locate it in three different places I looked.
There are FULL installers here: http://www.adobe.com/shockwave/download/alternates/#sp (version 11)
12.0.4.144 is here: http://get.adobe.com/shockwave/otherversions/

HT201442 My iPhone 4s hasnt been used in over 6 months. Everytime I plug it into my computer and iTunes, it says it requires a restore and update. It then comes up with an error after completing the download for the restore and update (takes around 10 min

My iPhone 4s hasnt been used in over 6 months. Everytime I plug it into my computer and iTunes, it says it requires a restore and update. It then comes up with an error after completing the download for the restore and update (takes around 10 minutes).Someone help me as I'm using the original iPhone 3 at the moment and it won't even take an ios 7 update!

Just to confirm on the screen of the iPhone do you see the itunes symbol with a cable pointing up to it?. If you do then your iPhone is inrecovery mode and would require you to restore it.
Now first you want to make sure iTunes is up to date and the cable you are using is not damaged. You also want to make sure iTunes is up to date.
Now if you get an error message then follow the article below to find out what causes the issue:
http://support.apple.com/kb/TS3694
In terms of the iPhone 3G that is definitely not able to update to iOS 7. Only the iPhone 4 and larter can update to iOS 7.

I purchased FrameMaker 10.0 Windows Upgrade License from FM9 and I can't find the download for this.

I purchased FrameMaker 10.0 Windows Upgrade License from FM9 and I can't find the download for this.

Get in touch with support if it doesn't show up on your Adobe account.
Mylenium

I cant find the download for 10.8 and every other software download just says "you need 10.8" to download.

I cant find the download for 10.8. Every update I try to download and intall just says "you need version 10.8 to install but, I cant find 10.8 to download.

When you do buy it from the Mac App Store ($20), it will download to your Applications Folder as
Install OS X Mountain Lion
provided that your hardware can support Mountain Lion. If your hardware is not capable, the Mac App Store will not let you buy it.

Updatable View issues: cannot select FOR UPDATE from view with DI

Hi All,
I have a simple view XY and an instead of trigger on that to insert data into one table which is used in the my view. When I do insert statement on view XY it is working fine from sql but when i used same thing with page process of " Process Row of XY Automatic Row Processing (DML) " i am getting following error. I am using APEX 3.0 . Please help me.
ORA-20001: Error in DML: p_rowid=xxxx, p_alt_rowid=abc, p_rowid2=, p_alt_rowid2=. ORA-02014: cannot select FOR UPDATE from view with DISTINCT, GROUP BY, etc.
Thanks

James,
are you already on 3.0.1.00.07 or 3.0.1.00.08? Have a look at the release notes, it says something about a bug fix for some occurrences of ORA-02014.
Also have a look at the new substitution value/item FSP_DML_LOCK_ROW which turns locking off if you set it to FALSE. See http://www.oracle.com/technology/products/database/application_express/html/3.0.1_readme.html#CHDIDIAF and also http://download-west.oracle.com/docs/cd/B32472_01/doc/appdev.300/b32471/advnc.htm#BCGFDAIJ
Patrick
My APEX Blog: http://inside-apex.blogspot.com
The ApexLib Framework: http://apexlib.sourceforge.net
The APEX Builder Plugin: http://apexplugin.sourceforge.net/ New!

The download for update from 2.0.0.0 to 2.3.0.0 fails

Similar Messages

Maybe you are looking for