The Downloads keep getting stuck in the Browser download section
Even when they're completed it tells me "a few seconds remaining" yet I can find it in my PC. The download's Complete as in 5MB/5MB But it doesn't get off the Library and some times It Disappears from its destination(very Rarely). It's just that the downloads getting stuck in the Download Library and then the download starting again every time I start Firefox Again(I cant cancel the download it Just Pauses) sucks.
hello, this is a bug in the latest 32 beta 9 version which will be addressed in the release candidate 1 build which should be deployed via auto-updates to beta users later today.
a workaround for the moment would be to enter '''about:config''' into the firefox address bar (confirm the info message in case it shows up), right-click somewhere on the page and create a new string setting with the name '''browser.safebrowsing.appRepURL''' and value '''https://sb-ssl.google<i></i>.com/safebrowsing/clientreport/download?key=%GOOGLE_API_KEY%'''
for reference see [https://bugzilla.mozilla.org/show_bug.cgi?id=1057764 bug #1057764] (please don't post in bug reports, but vote for the bug if you want to see it fixed)
Similar Messages
-
My ios update keeps getting stuck on the Restoring iPhone software stage. I uninstalled iTunes and reinstalled it again, but still nothing. Now I can't even use my phone as it shows the plug into iTunes screen. Please help!!!! Thanks,
A Restore first downloads a new copy of iOS to your computer. On a slow Internet connection this can take a long time. How fast is your connection? How long would you expect it to take to download 900 MB?
That's assuming nothing is interfering with the download. Some firewalls and antivirus programs will block the download or slow it down. So you should temporarily disable your security software. Security software can also block the update after the iOS download is complete. -
I ran into a glitch on my system that I tried to fix myself. My NOD32 was always showing the yellow warning circle as my protection status when I started my computer. I tried to fix this every way I new how.
Then I started to get pop ups asking me to fix and then send system error reports to Windows. Some stating they were '''''critical.''''' So I sent NOD32 the e-mail below.
'''Me:''' I cannot seem to run a complete system scan. I keep getting stuck at 56% at the following point. C:\Documents and Settings\Owner\Application Data\
Mozilla\Firefox\Crash Reports\Pending
I also keep getting messages to send error reports to Microsoft constantly. I also have this code C:\pagefile.sys-error opening
Thank you for your assistance.
'''Their solution:'''
Based on the information you provided, we recommend that you upgrade to latest version of ESET NOD32 Antivirus and see if this makes a difference.
Please click or copy/paste the following ESET Knowledgebase article into your web browser for step-by-step instructions:
'''Me''' : I did as they requested and am fully upgraded and licensed with their new edition.
Ran a new scan same problem.
I sent them a new e-mail but now wonder if it is a Firefox issue as, C:\Documents and Settings\Owner\Application Data\
''Mozilla\Firefox\Crash Reports\Pending'' this is where the scan stalls.
Any help would be appreciated.
Thank you.Try delete the files in Pending folder and make the scan again, do not be afraid to delete the files see : https://support.mozilla.org/en-US/questions/679996
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem. -
Every time I launch the browser the popup blocker option is unchecked. Why does the pop up blocker keep getting unchecked every time browser is launched?
Your above posted system details show outdated plugin(s) with known security and stability risks.
*Java Plug-in 1.6.0_05 for Netscape Navigator (DLL Helper)
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE) -
Here are a few more details. I put in a game cd for a windows computer, once I opened the folder on the desktop I noticed the install application was .exe so I tried to eject the cd but no matter what I tried on the computer it wouldn't come out. I will say though that I didn't try the manual cd eject cause I didn't have anything small to hit the button in the cd drive with. It was getting late so we decided to just turn off the computer and leave it for the next day. I can't remember if we turned the computer off with apple shut down or by holding down the power button but we walked away pretty quickly before it was fully shut down. The next day the computer won't turn on. When I walked into the room I was the computer stuck with a grey background with the apple logo showing and the circular thing under it frozen. Since no one was in the room I held down the power button and turned the computer off. We tried to start the computer again later but again it keeps getting stuck at the same spot. Now when we hold the power button down to turn it off I'm not sure if it's really turning off all the way. The screen goes dark but it sounds like the fan is still going. I tried disconnecting everything but the keyboard and mouse but when I started it up again it got stuck on the grey screen with just the apple logo. I'd really apprechiate help on this cause I live in Germany right now and support call centers work so much worse when you don't speak the language well... Thanks for any help you can give!
Restart your computer while holding down left mouse key. That will eject the CD and your Mac will start as normal.
Lupunus -
I'm trying to use the quick selection tool in Photoshop Elements 12 but it keeps getting stuck on minus. I've reinstalled twice and it will work for a little while and then get stuck again. When I select something, I have one shot at it and as soon as I let go of the mouse it switches to minus and I can't add anything else. How do I fix this?
When a tool misbehaves, go over to the far upper right corner of the tool options area and click the four-lined square. Choose Reset Tool from the popout menu.
-
I just updated my iphone to ios7 and I keep getting stuck at the 'Set up your iPhone' screen. I click 'Restore from Itunes Backup', but it only ends up restarting after restoring and fails to get past the 'Set up your iPhone' screen. Any ideas?
Normally, I would suggest restoring the iPad and uninstall and reinstall iTunes but you have done both of those things - more times than you ever imagined!
Have you thought about turning auto syncing off?
Without connecting your iPad to your laptop, start iTunes. Click on Edit. Click on Preferences. Click on Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
If you do this you can backup the iPad right away before it syncs. You may want to go into all of the iTunes tabs and just make sure that all of the current content on the iPad is selected to sync before you actually do sync.
This doesn't solve the problem, but it would prevent the automatic sync and erasing content. Hopefully, in the next few days- when iOS 5 is released - you will also be relieved of this weird iPad behavior - since the iOS devices are supposed to become PC free.
BTW - and this is no excuse for what you are experiencing, but I have found that some of the game apps that I had on my iPad turned out to be quite troublesome and after I removed them, my problems went away. I know that is almost sacrilege with regard to the Angry Birds addiction .... But I'm just saying ... -
Firefox won't start. Everytime I end the process/close the last window, it keeps getting stuck at about 2500k memory in the task manager. The only way I have to fix it is to change some kind of compability settings or try and access it in a new way, and every time it crashes/closed/computer blue screens that setting will no longer work.
That is a short term solution, but eventually I'll run out of ways to access firefox successfully. I've tried many solutions, and some worked, but only once. I have yet to find a permanent solution for this problem.First please update your plugins to make sure you are up to date. Shockwave Flash player has a newer version 16. In order to better manage the memory that Firefox uses please see these troubleshooting steps: [https://support.mozilla.org/en-US/kb/firefox-uses-too-much-memory-ram Firefox Uses too much RAM]
You also mentioned that Firefox crashes, we're sorry to hear that Firefox is crashing. In order to assist you better, please follow the steps below to provide us crash IDs to help us learn more about your crash.
#Enter ''about:crashes'' in the Firefox address bar and press Enter. A Submitted Crash Reports list will appear, similar to the one shown below.
#Copy the '''5''' most recent Report IDs that start with '''bp-''' and then go back to your forum question and paste those IDs into the "Post a Reply" box.
''' Note:''' If a recent Report ID does not start with '''bp-''' click on it and select '''Submit'''.
(Please don't take a screenshot of your crashes, just copy and paste the IDs. The below image is just an example of what your Firefox screen should look like.)
;[[Image:aboutcrashesFx29|width=500]]
Thank you for your help!
More information and further troubleshooting steps can be found in the [[Firefox crashes - Troubleshoot, prevent and get help fixing crashes]] article. -
Trying to set up my new iphone 5c using the iTunes back up from my iPhone 4. It keeps getting stuck on step 2 of 5 "syncing calendars" Considering I hardly use the calendar I don't know why it would take so long. (18 hours and counting)
Any advice would be greatly appreciated!Did you ever resolve the iCloud problem.I am in the same position and its driving me mad!!! If you have a link to an solution I would appreciate it.
-
I keep getting this warning (Your browser security settings don't permit the editor to automatically execute copying operations.) Help
See:
*http://kb.mozillazine.org/Granting_JavaScript_access_to_the_clipboard
*https://addons.mozilla.org/firefox/addon/852 - AllowClipboard Helper -
i use an ipad4, it keeps getting stuck randomly and i have to power it off and switch it on again. whats the solution to this problem?
(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Reset all settings
Settings>General>Reset>Reset all settings
Note: Data will not be affected but settings will be reset. -
My 4th gen Ipod nano keeps getting stuck on the apple logo.
My 4th gen Ipod Nano keeps getting stuck on the Apple logo screen, this happens everytime I plug it in to charge. I plug it in, an apple logo comes up, and it stays like that the entire time its plugged in. To get it to unfreeze, i have to press random buttons and unplug and re plug in earbuds. After 20-25min of doing this it unfreezes and I come to find it has gotten little to no charge after being plugged in for hours at a time. Any one else have this problem, and if so what do you do?
This can be a corrupted software/firmware on your iPod touch. If the recovery mode you did was not forced, then try to force it into recovery mode. This is how:
1. Force it to shut down (note: this sort of shut down should not be preformed unless you are in a situation like this because it is a hardware shutdown and will not attempt to unload software, save unsaved files, safely stop system processes, etc.) to do this, hold down the power/sleep button and home button for about 7 or 10 secs. Also I might be incorrect but I heard that you can just hold down the sleep and home button until the screen goes blank and then immediately let go.
2. Have iTunes running. Hold down the home button and plug the USB cable that came with your iPod into it. Keep on holding on the home button until a picture of a USB cable going into the iTunes logo appears. You are now in a forced recovery mode. (In case your not so tech-savvy forced recovery is the same as a normal recovery mode that an iPod might do if it knows an update or restore failed.)
3. iTunes should have shown a pop-up message about it found a iPod in recovery mode. Click OK, click your iPod from the sidebar and click restore. The iPod will show the apple logo for a while and iTunes will say "preparing iPod for restore" and then "waiting for iPod" this was the longest part of updates for me.
4. iPod will reboot when restore is completed. When I update my iPod it one time showed the apple logo for one whole sync until it showed the slide to unlock screen, so do not worry. P.S if that does not work do a DFU mode restore ( I've been told DFU mode stands for device firmware update mode) I'm running out of room, so google it. Hope this helped ;) -
My macbook pro keeps getting stuck on the grey screen
my macbook pro keeps getting stuck on the grey screen eventually im able to get it into safety mode yet i dont have the disc needed to restore or reboot it what should i do
See Grey Screen
https://support.apple.com/kb/TS2570
https://discussions.apple.com/message/16276201#16276201
You didn't mention your MBP model or OS X version. But the link above should help you. -
i keep trying to sync my iphone 4s but it wont finish the sync it keeps getting stuck on "Waiting for changes to be Applied" has anyone had a similar problem? and what should i do ?
I know that most of these posts were put up a little while ago
But.
I too had a similar problem and an "error" message (waiting for changes to be applied)
- my thoughts were:
Something to do with update to IOS 7.4
Corruption
Itunes software issue
After a LOT of research, I found a simple step that solved this issue for me.
I had been running my sync (pre - IOS 7.4) as automatic - see the options section under the summary tab
This can be viewed when you click on your device - right up the top you'll see tabs
SUMMARY / INFO / APPS / TONES / MUSIC / MOVIES / TV SHOWS / BOOKS / PHOTOS etc.
I changed my selection to manually manage music and videos and tried another sync
Wha La!
It began to copy over 700 songs that had not properly synced to my Ipad 2
BONUS: it then started to sync my videos again.
Hope this helps somebody.
It certainly made my life less frustrating
Downside: I have to MANUALLY manage - but it's better than all the hassles
NB: I don't know why this error occurs and I'm not sure this fix will work for everyone's issues but it can't hurt. -
My 4th gen nano keeps getting stuck on the restart screen
My 4th gen nan keeps getting stuck on the restart screen, the balnk one with the apple. Any ideas?
Reset it (hold down menu and center button) or Reset it in itunes. Make sure software is up to date!
-
My iMac keeps getting stuck on the pinwheel what should I do?
My iMac keeps getting stuck on the pinwheel and is running really slow. What should I do?
We need your model of iMac and the version of the Mac OS you have to provide useful help. There are four families of iMacs from 1998 to present, and what fixes one may not fix another.
Pleae do "About this Mac" from your Apple menu; you get something like this:
Tell us what it says for "Processor" and the version of the Mac OS ("!0.5.8" in the above example). Without that, we're running blind.
Thanks
Maybe you are looking for
-
Is there a limit to number of SNASW links?
We have an IBM 3745 with T/R which we disconected and attached a router with SNASW instead. Same macaddress as the 3745. It went fine first but when a lot of people started to logon they hit the wall and the SNASW stopped to respond to new connection
-
BC4J Custom Type Maps (MS-SQL cont.)
(FYI using JDeveloper 9.0.2.0.0, MS-SQL 2000 spk2 and MS-SQL's JDBC driver Version 2.2.0022) In the process of trying to get JDeveloper working fully with MS-SQL, I am at the point of developing a custom type map. Should this typemap include all mapp
-
Phantom entries on 'smart' playlists
I have itunes set so that after I watch a podcast, it is deleted at the next update. This part seems to work ok, however, it will delete the episode from the library list, but it will still appear in a smart playlist with an exclamation because the f
-
Problem with reading locale from moduleImpl
I extracted the locale bundle data from module by getViewObjects and I stored it into hashtable, problem is that i allways get data from default locale and not from users locale settings. These code is running on java servlet. code: NameModuleImpl Na
-
Add to Multiple Numeric Limit Test from code
How can I add tests to Adding to Multiple Numeric Limit Test from code using CVI code?